On 5/29/06, Kenneth Hopping <[EMAIL PROTECTED]> wrote:
Thanks for pointing me in the right direction. I finally got eth0
working, but it was a struggle.
Glad you got it working.
I selected the 3COM options like you suggested and recompiled the
kernel. Unfortunately, during reboot I got "inva
Monday 29 May 2006 09:19 skrev Kenneth Hopping:
> I selected the 3COM options like you suggested and recompiled the
> kernel. Unfortunately, during reboot I got "invalid compressed format
> (err=1)". I tried "make clean" to flush everything and compiled again
> but it still wouldn't boot. My drasti
On Mon, 2006-05-29 at 00:19 -0700, Kenneth Hopping wrote:
> I
> also learned to always keep the last working kernel as a backup when you
> reconfigure.
And you can add another piece of self-taught knowledge to your
toolkit :) This is one that I do without thinking now.
--
Iain Buchanan
You
Richard Fish wrote:
Ok, when you go to configure your kernel, go under "Device
Drivers->Network device support->Ethernet (10 or 100Mbit)". Select
the option "3COM cards", and then the "3c590/3c900 series..." with an
'M'.
Assuming that you already configured and installed a kernel, so that
/usr
Sunday 28 May 2006 20:28 skrev Daniel da Veiga:
> Maybe he already have the driver compiled as a module but its not
> loading it?!
If that was the case it would have shown up when he ran:
# find /lib/modules/2.6.16-gentoo-r7/kernel -type f -iname '*.ko'
Look in his previous mail. It didn't. This
On 5/28/06, Richard Fish <[EMAIL PROTECTED]> wrote:
On 5/28/06, Kenneth Hopping <[EMAIL PROTECTED]> wrote:
> Richard Fish wrote:
> >
> > What do lspci and lsmod report?
>
> 01:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
> (rev 74)
Ok, when you go to configure your kernel,
On 5/28/06, Kenneth Hopping <[EMAIL PROTECTED]> wrote:
Richard Fish wrote:
>
> What do lspci and lsmod report?
01:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
(rev 74)
Ok, when you go to configure your kernel, go under "Device
Drivers->Network device support->Ethernet (1
Richard Fish wrote:
On 5/27/06, Kenneth Hopping <[EMAIL PROTECTED]> wrote:
The problem appears to be that /sys/class/net/eth0 does not exist.
This is a pseudo-filesystem like proc that I cannot manipulate.
Is there some configuration file that needs initialization or a package
that I need to
On 5/27/06, Kenneth Hopping <[EMAIL PROTECTED]> wrote:
The problem appears to be that /sys/class/net/eth0 does not exist.
This is a pseudo-filesystem like proc that I cannot manipulate.
Is there some configuration file that needs initialization or a package
that I need to install?
No, you just
I'm installing linux-2.6.16-gentoo-r7.
Network initialization fails during startup:
* Starting eth0
* Loading networking modules for eth0
* modules: iptunnel ifconfig dhcpcd apipa
* ifconfig provides interface
* dhcpcd provides dhcp
* Bringing up eth0
* dhcp
* eth0
<[EMAIL PROTECTED]>
> >Reply-To: gentoo-user@lists.gentoo.org
> >To: gentoo-user@lists.gentoo.org
> >Subject: [gentoo-user] eth0 does not exist
> >Date: Thu, 02 Mar 2006 16:27:48 +
> >
> >Hi Folks,
> >
> >Very new to Gentoo, although not to Lin
_FaNtAsTiK
From: Tom Haddon <[EMAIL PROTECTED]>
Reply-To: gentoo-user@lists.gentoo.org
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] eth0 does not exist
Date: Thu, 02 Mar 2006 16:27:48 +
Hi Folks,
Very new to Gentoo, although not to Linux. I'm trying it out in QEMU,
and ha
On 3/2/06, Tom Haddon <[EMAIL PROTECTED]> wrote:
> Hi Folks,
>
> Very new to Gentoo, although not to Linux. I'm trying it out in QEMU,
> and have just completed the installation. Only problem is I can't seem
> to connect to the internet. QEMU is basically meant to provide an
> emulated network card
Hi Folks,
Very new to Gentoo, although not to Linux. I'm trying it out in QEMU,
and have just completed the installation. Only problem is I can't seem
to connect to the internet. QEMU is basically meant to provide an
emulated network card to the OS it's hosting. Works fine for the install
CD. Anyw
14 matches
Mail list logo
