On Saturday 21 April 2007 17:07, Matthew Daubenspeck wrote:
> On Fri, Apr 20, 2007 at 11:30:47PM +0100, Mick wrote:
> > > wlan0: encryption modes supported: none
> >
> > You need to define the encryption mode and module as suggested above.
>
> I have tried that as well and have copied settings and
On Fri, Apr 20, 2007 at 11:30:47PM +0100, Mick wrote:
> > iwconfig wlan0 mode Managed key hexkey essid local_wireless_wap channel
> > 11 rate 54M
>
> Try managed in lower case - may make a difference.
I tried that, just to be sure. Same result.
> Also, I assume that where you have "key hexkey" y
On Friday 20 April 2007 18:48, Matthew Daubenspeck wrote:
> I am trying to get wireless working on an x86 install using ndiswrapper.
> It worked for about 2 days, then stopped for no reason.
>
> modprobe works:
> net5416 : driver installed
> device (168C:0024) present
>
> Although running a
I am trying to get wireless working on an x86 install using ndiswrapper.
It worked for about 2 days, then stopped for no reason.
modprobe works:
net5416 : driver installed
device (168C:0024) present
Although running a standard iwconfig command fails:
Error for wireless request "Set Mode"
Hi all,
Trying to install a usb-wifi card, I'm following the howto in the forums:
http://forums.gentoo.org/viewtopic-t-364599-highlight-wifi+netgear.html
I found the right driver and installed it; now "ndiswrapper -l" returns:
Installed ndis drivers:
athfmwdl
> On 7/18/06, Timothy A. Holmes <[EMAIL PROTECTED]> wrote:
> > Hi folks:
> >
> > I rebuilt my kernel the other day and my wireless nick suddenly
stopped
> > operating, I re-emerged NDISWRAPPER and followed the howto on the
forum
> > to re-install it
>
> Which kernel? As I recall, ndiswrapper re
On 7/18/06, Timothy A. Holmes <[EMAIL PROTECTED]> wrote:
Hi folks:
I rebuilt my kernel the other day and my wireless nick suddenly stopped
operating, I re-emerged NDISWRAPPER and followed the howto on the forum
to re-install it
Every time I do Modprobe ndiswrapper I get a fatal error saying tha
On 7/18/06, Timothy A. Holmes <[EMAIL PROTECTED]> wrote:
Hi folks:
I rebuilt my kernel the other day and my wireless nick suddenly stopped
operating, I re-emerged NDISWRAPPER and followed the howto on the forum
to re-install it
Which kernel? As I recall, ndiswrapper requires a kernel with a 1
Hi folks:
I rebuilt my kernel the other day and my wireless nick suddenly stopped
operating, I re-emerged NDISWRAPPER and followed the howto on the forum
to re-install it
Every time I do Modprobe ndiswrapper I get a fatal error saying that the
module is not found
I need to know were to go from h
Try
# env-update
#source /etc/profile
DOH!!!
reboot with hardware still connected :)
On Sun, 2006-04-23 at 00:50 +0200, Fernando Meira wrote:
On 4/22/06, Gary Walker <[EMAIL PROTECTED]> wrote:
On 20/04/06, Fernando Meira
On 4/22/06, Gary Walker <[EMAIL PROTECTED]> wrote:
On 20/04/06, Fernando Meira <
[EMAIL PROTECTED]> wrote:
Hi,
after updating ndiswrapper to version 1.13 i became unable to use it.
I get this in dmesg:
ndiswrapper: Unknown symbol wrap_suspend_urbs
ndiswrapper: Unknown symbol wrap_resume_urbsAre
yo
On 20/04/06, Fernando Meira <[EMAIL PROTECTED]> wrote:
Hi,
after updating ndiswrapper to version 1.13 i became unable to use it.
I get this in dmesg:
ndiswrapper: Unknown symbol wrap_suspend_urbs
ndiswrapper: Unknown symbol wrap_resume_urbsAre you using a USB based wifi adapter? I got this error w
Hi,
after updating ndiswrapper to version 1.13 i became unable to use it.
I get this in dmesg:
ndiswrapper: Unknown symbol wrap_suspend_urbs
ndiswrapper: Unknown symbol wrap_resume_urbs
Assuming that the problem could be departing from the upgrade, I downgrade it to 1.11, but could not solve the
Anyone here an ndiswrapper expert? I would most welcome some setup help...
I'm working with a COMPAQ R3320US which sports an internal wifi setup using
the broadcom BCM4306 chipset. Installing the ndiswrapper and the correct
windows drivers, the setup process seems to go without a hitch.
Howev
Craig Duncan wrote:
Colin wrote:
Finally. I'm sending this email from a working Gentoo system.
My wireless card (D-Link DWL-120+, ACX100 chipset) had trouble with
acx100, so I unmerged that and gave ndiswrapper a shot. As you can see,
it works, despite not being listed on ndiswrapper's c
Colin wrote:
>Finally. I'm sending this email from a working Gentoo system.
>
>My wireless card (D-Link DWL-120+, ACX100 chipset) had trouble with
>acx100, so I unmerged that and gave ndiswrapper a shot. As you can see,
>it works, despite not being listed on ndiswrapper's compatibility page.
>(
Finally. I'm sending this email from a working Gentoo system.
My wireless card (D-Link DWL-120+, ACX100 chipset) had trouble with
acx100, so I unmerged that and gave ndiswrapper a shot. As you can see,
it works, despite not being listed on ndiswrapper's compatibility page.
(I should probably ad
17 matches
Mail list logo
