DJ Delorie wrote:
>> Is the above the exact syntax ?
>
> PCB follows the GNU coding standards,
(.. snip ..)
> The only exception, usually, is comments
Is this also true for the c portion of gschem, gnetlist, gerbvierw, etc. ?
---<)kaimartin(>---
--
Kai-Martin Knaak, Email: k...@familieknaak.d
On Sun, Sep 18, 2011 at 11:46 AM, DJ Delorie wrote:
>> I assume there are PCB devs that prefer the gnu style?
>
> 1. I prefer GNU style. Emacs automatically does this style when
> coding, too.
>
Good enough. Note that Emacs automatically does whatever style you
tell it to, including the linux
> I assume there are PCB devs that prefer the gnu style?
1. I prefer GNU style. Emacs automatically does this style when
coding, too.
2. GNU style seems to be popular elsewhere too, which reduces the
learning curve for many new developers
3. Historically, that's what we've used.
__
On Sun, Sep 18, 2011 at 4:18 AM, Peter Clifton wrote:
> Just for the record, I don't like PCB's code formatting style myself
> either ;)
>
I assume there are PCB devs that prefer the gnu style? Or is it only
enforced to be consistent with all the legacy code?
Jared
___
> Can the style conventions be found anywhere in a halfway comprehensive
> written form?
http://www.gnu.org/prep/standards/
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
> Is the above the exact syntax ?
PCB follows the GNU coding standards, Run the source through "indent"
and it should come out correct.
The only exception, usually, is comments (since we build docs from
them) and table-formatted structure data, since GNU style creates much
more whitespace than w
> Can the style conventions be found anywhere in a halfway comprehensive
> written form?
http://astyle.sourceforge.net/
Better would be to write a AStyle configuration file, that matches the
standard style of the code, that could then be applied to
the code so all of it is completely self-consist
Peter Clifton wrote:
> PCB mostly has a consistent style, and we won't apply patches which
> don't follow that.
>
> Two space indents,
>
> if (test)
> {
> statements (like, this);
> }
> else
> {
> even_if_they_ARE_horrid ();
> }
Can the style conventions be found anywhere in a halfway comprehen
On Sun, 2011-09-18 at 01:25 -0700, Jared Casper wrote:
> On Sun, Sep 18, 2011 at 1:00 AM, Bert Timmerman
> wrote:
> >> PCB mostly has a consistent style, and we won't apply patches
> >> which don't follow that.
> > This is the next patch on my todo list.
> >
> > Is the above the exact syntax ?
> >
On Sun, Sep 18, 2011 at 1:00 AM, Bert Timmerman
wrote:
>> PCB mostly has a consistent style, and we won't apply patches
>> which don't follow that.
> This is the next patch on my todo list.
>
> Is the above the exact syntax ?
>
No worries, I changed the style in the first place (when a good chunk
Hi all,
> -Original Message-
> From: geda-user-boun...@moria.seul.org
> [mailto:geda-user-boun...@moria.seul.org] On Behalf Of Peter Clifton
> Sent: Sunday, September 18, 2011 12:16 AM
> To: geda-user@moria.seul.org
> Subject: Re: gEDA-user: help with pcb dsn plugin
&g
On Fri, 2011-09-16 at 11:58 -0700, Jared Casper wrote:
> -- extensive style changes for my own sanity. There was inconsistent
> style throughout (like all of pcb's code), so I chose the one I
> personally like best (linux kernel style with indent of 4 instead of
> 8). :)
PCB mostly has a consiste
Sun, 6/12/11, Josh Jordan wrote:
>
> From: Josh Jordan
> Subject: gEDA-user: help with pcb dsn plugin
> To: geda-user@moria.seul.org
> Date: Sunday, June 12, 2011, 12:14 PM
>
> I made a dsn export/import plugin a few years back that I am trying
> to
&
Ethan Swint
writes:
> On 06/14/2011 05:27 PM, Stefan Salewski wrote:
>> Guess: try bom2 as advertised from
>> gnetlist -g help
>>
>> If that does not help, then we have to wait for a reply from smart
>> people. I have no idea about the meaning of the error messages...
> Doh! caPitaliZation matte
On 06/14/2011 05:27 PM, Stefan Salewski wrote:
On Tue, 2011-06-14 at 17:20 -0400, Ethan Swint wrote:
For some reason, when I call gnetlist, e.g.
gnetlist -g BOM2 asymmetric_3phs.sch -o bom.txt
it encounters an error:
Failed to read BOM2 scm file [/usr/share/gEDA/scheme/gnet-BOM2.scm]
Backtrac
On Tue, 2011-06-14 at 17:20 -0400, Ethan Swint wrote:
> For some reason, when I call gnetlist, e.g.
>
> gnetlist -g BOM2 asymmetric_3phs.sch -o bom.txt
>
> it encounters an error:
>
> Failed to read BOM2 scm file [/usr/share/gEDA/scheme/gnet-BOM2.scm]
> Backtrace:
> In current input:
> 1: 0*
For some reason, when I call gnetlist, e.g.
gnetlist -g BOM2 asymmetric_3phs.sch -o bom.txt
it encounters an error:
Failed to read BOM2 scm file [/usr/share/gEDA/scheme/gnet-BOM2.scm]
Backtrace:
In current input:
1: 0* (BOM2 "output.net")
:1:1: In expression (BOM2 "output.net"):
:1:1: Unbou
-user: help with pcb dsn plugin
To: geda-user@moria.seul.org
Date: Sunday, June 12, 2011, 12:14 PM
I made a dsn export/import plugin a few years back that I am trying
to
merge into latest git pcb version. It works to export and the dsn
can
be routed with
> it lists a "LoaddsnFrom" in the list of actions. It says "Unknown
> Action" when I try to use LoaddsnFrom or ActionLoadDsnFrom, or
> LoadDsnFrom. Is there a way to list what actions exist in pcb?
pcb --show-actions
___
geda-user mailing list
geda-
I made a dsn export/import plugin a few years back that I am trying to
merge into latest git pcb version. It works to export and the dsn can
be routed with freerouting.net, and the import function appears in the
menu, but the import action does not work. The function name is
Hi Oliver,
I'm the developer of PCB's toporouter[1]. I have a few questions, if
you don't mind:
- Do you mind curvilinear wiring?
- How many power supplies?
- How much are you paying for the job?
- Have the schematics already been captured in gschem?
- Have footprints for components already been
I hope this is not considered list abuse, but I am looking for someone
to layout a board in geda's PCB.
The board consists of approximately 100 ICs and associated components.
There is a lot of repetition on the board, and most of the ICs are
single opamps, so the board is not as big
-user: Help I can move by REFDES
On 02/19/2011 09:41 PM, Oliver King-Smith wrote:
>I have managed to get my refdes for one component about 7" away
from
>the component. When I select the refdes I can seem to move it.
How do
>I get it back to my
On 02/19/2011 09:51 PM, Ethan Swint wrote:
On 02/19/2011 09:41 PM, Oliver King-Smith wrote:
I have managed to get my refdes for one component about 7" away from
the component. When I select the refdes I can seem to move it.
How do
I get it back to my poor component?
Oliver
To
On 02/19/2011 09:41 PM, Oliver King-Smith wrote:
I have managed to get my refdes for one component about 7" away from
the component. When I select the refdes I can seem to move it. How do
I get it back to my poor component?
Oliver
To move a refdes in the GUI, 1) make sure that i
I have managed to get my refdes for one component about 7" away from
the component. When I select the refdes I can seem to move it. How do
I get it back to my poor component?
Oliver
___
geda-user mailing list
geda-user@moria.seul.org
http:
On Fri, Aug 13, 2010 at 12:14 PM, Stefan Salewski wrote:
> On Fri, 2010-08-13 at 12:19 +0100, sibu xolo wrote:
>> I have been trying to compile the program gwave (from svn )
>
> gwave is one of the most demanding tools of geda suite, for building
> from sources. In my opinion, if your goal is to c
On Friday 13 August 2010 18:14:17 Stefan Salewski wrote:
> You may look at a few (old) bug reports of gentoo bug database:
>
> http://bugs.gentoo.org/buglist.cgi?quicksearch=ALL+gwave
>
> This one was one very demanding:
>
> http://bugs.gentoo.org/show_bug.cgi?id=293397
yes thanks
I also came
On Fri, 2010-08-13 at 12:19 +0100, sibu xolo wrote:
> Dear All,
>
> I have been trying to compile the program gwave (from svn )
gwave is one of the most demanding tools of geda suite, for building
from sources. In my opinion, if your goal is to compile latest versions
from sources, then some kno
sibu xolo wrote:
> `sgtk_wrap_gtkobj'
> wavelist.o: In function `get_gwave_tooltips':
> $SOURCES/gwave/trunk/src/wavelist.c:417: undefined reference to
> `sgtk_get_gtkobj'
> collect2: ld returned 1 exit status
> make[4]: *** [gwave] Error 1
> make[4]: Leaving directory `$SOURCES/gwave/trunk/src'
>
Dear All,
I have been trying to compile the program gwave (from svn )
on a machine with the following features:-
-CPU:- AMD64-2cores
-OS-linux (cblfs) kernel-2.6.34, gcc-4.4.2, kde-4.4.5
-gtk:- gtk-2.16.1, guile-gnome-platform-2.16.1 and other dependencies
-gnucap:curent 2009-stu
On Tuesday 10 August 2010 21:14:57 Peter TB Brett wrote:
> On Tue, 10 Aug 2010 13:15:33 +0100, sibu xolo wrote:
> > Making all in src
> > make[3]: Entering directory `$SOURCES/geda-gaf-1.6.1/libgeda/src'
> > /bin/sh ../../libtool --silent --tag=CC --mode=compile g++ -m64 -fPIC -
>
> It looks li
On Tue, 10 Aug 2010 13:15:33 +0100, sibu xolo wrote:
> Making all in src
> make[3]: Entering directory `$SOURCES/geda-gaf-1.6.1/libgeda/src'
> /bin/sh ../../libtool --silent --tag=CC --mode=compile g++ -m64 -fPIC -
It looks like you're compiling with g++. This doesn't seem right to me...
Pet
Dear gEDA-users,
I am new to this list. I searched the gEDA mailing lists and archives and I
hope I am on the correct list -(the dev list is by invitation only)
If I am not I would be grateful for guidance.
---Now I am trying to compile gEDAgaf on a computer with the following
features:
g] On
Behalf Of Kovacs Levente [leventel...@gmail.com]
Sent: Wednesday, April 21, 2010 4:08 AM
To: geda-u...@seul.org
Subject: Re: gEDA-user: help needed regarding PCB componet
On Tue, 20 Apr 2010 18:54:47 -0400
David Garcia Campos
wrote:
> Hi everyone,
> I am new to designing PCB boards and
On Tue, 20 Apr 2010 18:54:47 -0400
David Garcia Campos
wrote:
> Hi everyone,
> I am new to designing PCB boards and have spent quite a lot time
> today trying to find out which msp4305xxx component is the right one
> from the libraries included in the PCB application. Attached is the
> mechanica
My SQFP-50P-1480L1-1480L2-80N looks like it could work (see
http://www.luciani.org/geda/pcb/pcb-footprint-list.html).
Double-check the dimensions against your component and
process specs.
(* jcl *)
--
Closed Tools + Open Files != Open Hardware
You can't create open hardware with closed EDA too
Hi everyone,
I am new to designing PCB boards and have spent quite a lot time today trying
to find out which msp4305xxx component is the right one from the libraries
included in the PCB application. Attached is the mechanical data sheet the
microchip. In the PCB libraries there is more than one
On Aug 1, 2008, at 5:56 PM, Dan McMahill wrote:
> But don't do that if you plan on wave soldering your board or you'll
> solder your mounting holes shut. But if this is for a home board
> it is
> extremely unlikely that you have a wave solder system. Yeah, I know
> someone, perhaps Mr. McGuire,
DJ Delorie wrote:
>> Do I need the unplated-drill.cnc file?
>
> If you have unplated holes (i.e. mounting holes), they'll be in there
> and NOT in the plated-drill file. However, most fabs charge extra for
> unplated holes, if they accept them at all. Most of us change them to
> plated holes so
> Do I need the unplated-drill.cnc file?
If you have unplated holes (i.e. mounting holes), they'll be in there
and NOT in the plated-drill file. However, most fabs charge extra for
unplated holes, if they accept them at all. Most of us change them to
plated holes so it's cheaper to have the boa
You probably already have them. It used to be the case that the
aperture list was a separate file, but PCB includes the aperture list at
the top of each gerber file.
Look at the file, once you get past some header info, about 10 lines in
and you should see some lines that look like this:
%AD
Robert Butts wrote:
> One of the pcb websites claims one common gerber mistake is a missing
> aperture list. What is this and does PCB create it?
Short answer: Don't worry, you are good to go.
History lesson:
In the old days of RS-274D the gerber files contained X,Y, Lamp
on/off/flash, and sele
> One of the pcb websites claims one common gerber mistake is a missing
> aperture list. What is this and does PCB create it?
Robert,
This may be obsolete information since most PCB-makers don't use apertures
any more afaik. These would have been little windows used to shoot light
through to ex
One of the pcb websites claims one common gerber mistake is a missing
aperture list. What is this and does PCB create it?
On Fri, Aug 1, 2008 at 10:36 AM, Robert Butts <[EMAIL PROTECTED]> wrote:
> Do I need the unplated-drill.cnc file?
>
>
> On Fri, Aug 1, 2008 at 9:49 AM, DJ Delorie <[EMAIL PRO
Do I need the unplated-drill.cnc file?
On Fri, Aug 1, 2008 at 9:49 AM, DJ Delorie <[EMAIL PROTECTED]> wrote:
>
> > What is the stencil layer? A pcb fab company wants me to identify the
> top
> > stencil, bottom stencil and outline layer. Which gerber files are these?
>
> Stencil is probably the
> What is the stencil layer? A pcb fab company wants me to identify the top
> stencil, bottom stencil and outline layer. Which gerber files are these?
Stencil is probably the silkscreen layer, assuming you can figure out
the other ones are copper and solder mask. For outline, if you don't
have
What is the stencil layer? A pcb fab company wants me to identify the top
stencil, bottm stencil and outline layer. Which gerber files are these?
On Thu, Jul 31, 2008 at 3:40 PM, <[EMAIL PROTECTED]> wrote:
>
> >What are the .fab.gbr, front.gbr and frontpaste.gbr files?
>
> fab is a fabrication
>What are the .fab.gbr, front.gbr and frontpaste.gbr files?
fab is a fabrication drawing outlining the numbers of holes and sizes and
general info. You should send it.
gbr. is the artwork for each layer. You should have:
top_copper.gbr
bottom_copper.gbr
top_silk.gbr
plated-holes.cnc
for a si
> I'm ordering a pcb from APCircuits. They want me to use their dropdown list
> to define each file from the export gerber that PCB spat out. What are the
> .fab.gbr, front.gbr and frontpaste.gbr files? Should I include the .net
> and .pcb files?
In pcb, use the File->Export->Gerber option to
I'm ordering a pcb from APCircuits. They want me to use their dropdown list
to define each file from the export gerber that PCB spat out. What are the
.fab.gbr, front.gbr and frontpaste.gbr files? Should I include the .net
and .pcb files?
Thanks
___
If you're installing out of CVS, run ./autogen.sh
That runs all the auto* programs you need to generate all the
configury.
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Hi gurus,
I'm trying to install pcb on Fedora 9, but can't find the configure file,
and can't seem to build it. Any help would be massively appreciated.
Craig
$ cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/pcb login
$ cvs -z3 -d:pserver:[EMAIL PROTECTED]:/cvsroot/pcb co -P
pcb
$ cd pcb
$ ls
acincl
> Hi DJ,
>
> Please excuse me sending this directly to you. For some
> strange reason keeps bouncing for some
> adminastrative reason.
>
> I inadvertently unlocked a component (my PCB outline with grounded
> mounting holes) and moved it when zoomed in. Doing that moved the
> traces causi
On Tue, 2007-05-15 at 21:09 -0400, Vincent Onelli wrote:
> I start using gschem part of geda 20050313 version on Xandros os. It
> constantly when you list expect close the gschem leaving me with the
> unsaved portion to be reentered again, I know that this is an older
> version, but this version is
I start using gschem part of geda 20050313 version on Xandros os. It constantly
when you list expect close the gschem leaving me with the unsaved portion to be
reentered again, I know that this is an older version, but this version is the
only version available from Xandros network.
Is there any
Stuart,
That was pretty much my starting point, with the same results. Thanks
for the information though, as in thinking about the problem, I wasn't
certain just what the various slot attributes were contributing, given
that there were no common pins among the *.sym elements.
Harold Skank
O
On Sat, 24 Feb 2007, Harold D. Skank wrote:
In order to make the information more readable, I have
broken the symbols into slots, 4 in the smaller case and 6 in the larger
case. Since none of the slots within a symbol share any common pins, I
have deleted the slotdef attribute from the symbols.
Harold D. Skank wrote:
People,
I need some help here. I'm trying to work with _LARGE_ symbols and
footprints..
.
.
.
Help would be greatly appreciated. This is an important project and
further delays would cause serious problems.
Steve Meier works with large FPGA symbols and probably has a
no, I'm pretty certain (95%) that it is not gsch2pcb causing the
problem. It
is almost certainly gnetlist.
gnetlist -g PCB -o myfile.net mysch1.sch mysch2.sch ...
Fair enough. In the backend gnet-PCB.scm, this fcn:
(define (PCB:display-connections nets)
(apply format #f "~:@{~A-~A ~
Harold,
>> People,
>>
>> I need some help here. I'm trying to work with _LARGE_ symbols and
>> footprints. In the smaller case, over 1100 pins and in the larger case
[snip]
>
>Can you send me a test case that I can run? It is quite possible that
As I responded yesterday:
http://archives.seu
Stuart Brorson wrote:
It's just a blind shot in the dark, but here's a possibility.
I took two minutes to look through the gsch2pcb.c code, which lives in
utils/src. There are a number of places where a 1024 byte character
buffer is created at the beginning of a function, like this:
add_elem
Harold D. Skank wrote:
People,
I need some help here. I'm trying to work with _LARGE_ symbols and
footprints. In the smaller case, over 1100 pins and in the larger case
over 1700 pins. In order to make the information more readable, I have
broken the symbols into slots, 4 in the smaller case
Harold,
To run gsch2pcb I have created a project1 file in which I can tell the
system which schematic pages to process (1 symbol slot per page). If I
process only 1 or 2 pages, i.e. 1 or 2 slots, the system functions
correctly and I can enter PCB and pull up the footprint and view the
associate
People,
I need some help here. I'm trying to work with _LARGE_ symbols and
footprints. In the smaller case, over 1100 pins and in the larger case
over 1700 pins. In order to make the information more readable, I have
broken the symbols into slots, 4 in the smaller case and 6 in the larger
case.
mailing list
Subject: Re: gEDA-user: Help request
On Friday 16 June 2006 16:21, Svenn Are Bjerkem wrote:
> What is it with Ubuntu or Kubuntu that makes you _not_ use Debian
> directly?
I use Debian directly, but I think I can explain it...
First, take a look at what Debian offers... The
On Friday 16 June 2006 16:21, Svenn Are Bjerkem wrote:
> What is it with Ubuntu or Kubuntu that makes you _not_ use
> Debian directly?
I use Debian directly, but I think I can explain it...
First, take a look at what Debian offers... There are 3
variants: "stable", "testing" and "unstable".
1, 2006 10:14 AM
To: gEDA user mailing list
Subject: Re: gEDA-user: Help request
Stuart Brorson wrote:
> FC and SuSE come with all required
> software already on the disks (although you do need to read the gEDA
> FAQ to find out that some of the required packages aren't installed by
Stuart Brorson wrote:
> FC and SuSE come with all required
> software already on the disks (although you do need to read the gEDA
> FAQ to find out that some of the required packages aren't installed by
> default).
If I read Al correctly, this is exactly like the situation with default
Ubuntu. No
>
> On Thursday 15 June 2006 07:17, Stuart Brorson wrote:
> > 1. =A0I don't recommend using Ubuntu to build software. =A0Ubuntu
> > doesn't come with the usual build tools (gcc, header files
> > and all that) installed. =A0That's why you had all the
> > dependecies to deal with.
> >
> > Ubuntu is
al davis wrote:
1. I don't recommend using Ubuntu to build software. Ubuntu
doesn't come with the usual build tools (gcc, header files
and all that) installed. That's why you had all the
dependecies to deal with.
Ubuntu is good for e-mail and text editing, but not at all
good for the task you
al davis wrote:
Fedora works. I can see how some people like it best. There
are some issues that make it not my choice. It has fewer free
packages available than Debian or Ubuntu, but most commercial
software supports Fedora first. This is the best choice if you
want to run commercial sof
On Friday 16 June 2006 02:07, Adrian Nania wrote:
> I do realize the smart PATH work around from /root/.bashrc is
> just useless. I have seven new lines at the end of .bashrc:
>
> #aditional required variables
> LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/home/work/programs/gEDA/lib
> PATH=$PATH:/home/work/p
On Friday 16 June 2006 02:07, Adrian Nania wrote:
> First, thanks you all for your response. Looks like I am the
> unlucky one or something is fishy with Ubuntu. I have checked
> as per Stuart recommendation the config.h.in file and it is
> there, but I have no clue if what is inside is right or no
On Thursday 15 June 2006 07:17, Stuart Brorson wrote:
> 1. I don't recommend using Ubuntu to build software. Ubuntu
> doesn't come with the usual build tools (gcc, header files
> and all that) installed. That's why you had all the
> dependecies to deal with.
>
> Ubuntu is good for e-mail and tex
On Friday 16 June 2006 20:50, David Carr wrote:
> Let me know what happens at this point. If something fails, one of a few
> things could be wrong. Firstly, you could have installed a broken version
> of a library or tool. For example I noticed that it looks like you
> installed readline using t
On Thursday 15 June 2006 18:51, Phil Taylor wrote:
> Adrian,
>
> David is right. I have built a fair amount of software with Ubuntu and
> it gives you an experience not unlike debian. I've had pretty good luck
> with it as a distro, and the IRC support channel is very active.
What is it with Ubu
a random
> result and not a policy with some hidden rationale.
>
> Please help me to figure out how to make a complete installation from CVS
> (I suspect this is the place where I hope to find any new patch and the
> latest and greatest version). And also, I need help to get rid of th
edirect my request for a painless one-click
online update button inside of gEDA?
With many thanks,
Adrian Nania
-Original Message-
From: [EMAIL PROTECTED] on behalf of Phil Taylor
Sent: Thu 6/15/2006 9:51 AM
To: gEDA user mailing list
Subject: Re: gEDA-user: Help request
Adrian,
David
Adrian,
David is right. I have built a fair amount of software with Ubuntu and
it gives you an experience not unlike debian. I've had pretty good luck
with it as a distro, and the IRC support channel is very active.
Phil
David Carr wrote:
Stuart,
I'd like to contend your point that Ubu
Stuart,
I'd like to contend your point that Ubuntu is bad for building
software. In fact I'd say its just as good as every other linux
distribution, you just need a few packages that are not installed by
default.
For best results using Ubuntu, install the following packages using
synaptic
Hi --
1. I don't recommend using Ubuntu to build software. Ubuntu doesn't
come with the usual build tools (gcc, header files and all that)
installed. That's why you had all the dependecies to deal with.
Ubuntu is good for e-mail and text editing, but not at all good for
the task you are attemp
Hi all,
I am trying to build gEDA from CVS. I do have really hard time to travel thru
the linux flavors jungle, I have installed five linux versions simultaneously
only to be able to find one useful for gEDA. Only Ubuntu was friendly enough
for me, still I could not overcome a few problems. I a
83 matches
Mail list logo
