oing on there nowadays though.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
doesn't work. It might be the same problem for all the report I did so far.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Each time I save my layout, a message appears: "layout changed. Do you
want to load it?" or something like that.
Brr well of couse it changed! I saved it! :-) Ok, I know it is a good
feature...
--
Kovacs Levente
Voice: +3
assertion failed: (had_selection)
Aborted
and the footprint not saved. :-(
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
e copper
diameter is a bit increased.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
-
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
On Mon, 5 Sep 2011 16:43:43 -0400
DJ Delorie wrote:
> And nine women can have a baby in a month
:-)
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
On Thu, 01 Sep 2011 02:01:34 +0100
Peter Clifton wrote:
> Not a complete fix
Peter, thanks for fixing it!
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mail
On Tue, 30 Aug 2011 12:01:00 -0700
Andrew Poelstra wrote:
> Fixed in git head.
Thanks! Maybe I can see why the "automatic layer (group) change" doesn't work.
Can you give me any clue where it is located in the code?
Thank you
Levente
--
Kovacs Levente
V
m Loading menus from
Using default menus
cheers,
Levnte
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
On Mon, 29 Aug 2011 22:28:22 +0200
Levente Kovacs wrote:
> On Mon, 29 Aug 2011 10:28:11 -0700
> Colin D Bennett wrote:
>
> > Nice! That sounds very slick. Have you shared your code for this
> > pin-mapping tool?
>
> What I do is I share my git repositories...
&g
skel;h=4acca5f5b50d8943656cbd9a4faf46726a0e804f;hb=ce4516e8a351b54818abfaacb215d7864b6d1b43
Makefile.sch is the one for schematics.
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/li
stuck anywhere.
>
> Other than that, nothing will be broken or confused.
Ok. Thanks.
I found that layer selection and toggle doesn't work as it was. I have to
click 3 times (or something) to have the layer switched on or off. First click
often moves the highlighted area to another line
7;ll try this now.
>
> Waiting a few hours will fix the build failure. I'll be sure to keep
> an eye out for this when pushing commits in the future.
OK.
So which is the latest commit?
728f350268e134ca116a6f79577843db7b18e82c
or
acf8d00db4a90b555d768341a97453914b7b4aec
?
git is confus
uture
-rw-r--r-- 1 leva leva706 2011-08-29 14:43 Makefile.am
I think I shell wailt till 14:43.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
the name of the newly created symbol. The script will add other
information as well like footprint name, etc.
With this, you don't have to mess with your symbols nor with your footprints,
and everything works quite well for me.
Of course, everything is makefile driven... etc. The pinmap and sy
kage. Have an intermediate layer (scripts, database, pinmaps, etc.)
that do the heavy lifting for you.
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
I have my perl scripts which can add pin
numbers to symbols according to pinmap files.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
On Tue, 23 Aug 2011 16:31:49 -0400
DJ Delorie wrote:
> I think dockable toolbars is the way to go.
+1.
And the ability to store toolbar states in configuration file, or *.pcb
file.
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
g
velopers just do what they want to?
Don't get me wrong, I don't say anything against it... just curious. But maybe
it would be nice to have one... someone might pick up some of the tasks, and
do it.
Levente
--
Levente Kovacs
http://levente.logonex.eu
lement everything with toolbar
(if I'm not mistaken) That would play nice on a dual headed setup. There were
fights against GTK people not to take tear-off menus from gtk3. But they did
AFAIK.
Levente
--
Levente Kovacs
http://levente.logonex.eu
__
is good when you work with two layers. However, it is not
so good when you have a 4 layer board. Some more generic strategy would be
better.
However, thank you for your effort to make PCB better! :-)
Levente
--
Levente Kovacs
http://levente.logonex.eu
_
On Mon, 22 Aug 2011 16:51:03 -0400
DJ Delorie wrote:
> Which GUI ?
GTK
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
The automatic layer change capability is missing from the current HEAD
( 7b590a617db3ca3ed69965b544f1468f82c39dfe ). I.e. when you swap viewing side
with TAB.
It works only once, then stops working.
Thanks,
Levente
--
Levente Kovacs
http://levente.logonex.eu
exit
> gschem, restart, and load the sheet.
I am guessing that you edit the symbol too. You don't have to. You just have
to save the sheet, not the symbol. You should promote the slot attribute for
both instances.
Levente
--
Kovacs Levente
Voice: +36705071002
details. I subscribed to
the mailing list.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
to their homepage. :-)
http://git.logonex.eu/?p=library.git;a=tree;f=electronic/footprint;h=1850fa21028a1f1e69284f1f6b67849e41fe4763;hb=HEAD
tag_connector_*.fp
Cheers,
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-u
ed this for the layer called "outline".
For the others, thank you for taking time playing with it. I didn't
experienced any trouble with the feature. However, I'm not a heavy DRC user.
Levente
--
Levente Kovacs
http://levente.logonex.eu
y care), two monitors and dumped
down XFCE.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
If you add the attribute
PCB::skip-drc
to a layer, that won't be checked against DRC, and commections.
Levente
On Wed, 3 Aug 2011 23:56:23 -0700
Colin D Bennett wrote:
> On Thu, 04 Aug 2011 01:48:09 +0200
> Kai-Martin Knaak wrote:
>
> > Colin D Bennett wrote:
> &g
icy?
Thanks,
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
ty string.
Thanks for pointing this out.
Attached is the new patch.
Levente
--
Levente Kovacs
http://levente.logonex.eu
diff --git a/src/find.c b/src/find.c
index eb4cac2..c5159ba 100644
--- a/src/find.c
+++ b/src/find.c
@@ -822,6 +822,8 @@ LookupLOConnectionsToPVList (bool AndRats)
/* n
test.
>
> Thanks for reporting!
Thanks for commiting!
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Attached you can find the "skip_drc" patch for the current head.
It would be nice if it was checked in to git HEAD.
Thanks,
Levente
--
Levente Kovacs
http://levente.logonex.eu
diff --git a/src/action.c b/src/action.c
index 4f2e401..af93c19 100644
--- a/src/action.c
+++ b/sr
On Fri, 17 Jun 2011 12:42:09 +0200
Gabriel Paubert wrote:
> - pcb_fprintf (f, "X%06.0mmY%06.0mm\r\n",
> + pcb_fprintf (f, "X%06.0mlY%06.0ml\r\n",
Is this commited?
Thanks,
Levente
--
Kovacs Levente
Voice: +36705071002
___
the layer data to the fab house. Make sure you have mask openings
on vias. Solder jumpers in the vias.
I recommend using double sided boards.
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
ht
On Mon, 16 May 2011 10:17:34 +0100
Peter Clifton wrote:
> Anyway, it would be worth testing to check
I tested it on my notebook. It has an Atom CPU with an intel GPU.
With the GL renderer it can do 7fps.
With the original renderer it is 7.2.
No significant change.
Levente
--
Leve
On Tue, 17 May 2011 00:10:07 +0100
Peter Clifton wrote:
> I'll try and fix it shortly.
Peter,
Thank you.
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org
s=0x0) at hid/gtk/gui-top-window.c:2733
#44 0x080ab3c0 in main (argc=1, argv=0xb394) at main.c:1097
(gdb)
Levente
--
Kovacs Levente
Voice: +36705071002
RES400.fp
Description: Binary data
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
he non-GL calls were
> software drawn, the GL ones are still more complicated.
>
> Anyway, it would be worth testing to check.
I give it a test on my netbook later this week.
Levente
--
Kovacs Levente
Voice: +36705071002
___
ged
Hi,
Is there any drawbacks running the GL renderer on system without hardware
openGL support?
Thanks,
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo
Do you have this issue with PCB compiled with --disable-gl ?
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
d
> data-structures, which do change from time to time.
That is good to know.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
I'm trying to load autocrop.so to my recently compiled (from git HEAD) pcb.
What I get is this:
dl_error: /home/leva/.pcb/plugins/autocrop.so: undefined symbol:
ClearAndRedrawOutput
Is there any way to tweak pcb and/or autocrop.c to work together?
Thanks,
Levente
--
Levente Kovacs
On Sat, 16 Apr 2011 15:13:33 -0600
John Doty wrote:
> If the refdes is "V1", the current is "V1#branch".
Thank you. That did the trick.
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-u
On Sat, 16 Apr 2011 13:10:50 -0400
al davis wrote:
> With Gnucap, just ask for the capacitor current.
>
> print ac i(c*)
>
> (this prints all capacitor currents)
I use ngspice... will it work with that?
--
Levente Kovacs
http://lev
f the source.
Could you provide any hint on this?
The schematic attached.
Any help is appreciated.
Thanks,
Levente
--
Levente Kovacs
http://levente.logonex.eu
PA_lpf.sch
Description: application/geda-schematic
___
geda-user mailing list
geda
On Mon, 11 Apr 2011 16:58:37 +0200
Uwe Bonnes
wrote:
> What value do you need? Try NP0/COG type, even if substantial more
120pf ... 1.5nF
> expensive. I guess the X ceramic will introduce more harmonics than
> it will filter out...
Thanx for the hint.
--
Kovacs Levente
Voice: +36
itors with as much DC voltage rating as I can
get. I don't know if there's any connection between the DC and AC losses.
Thanks,
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.s
nductive layer" in CR5000.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
adds the ability to ignore DRC.
http://archives.seul.org/geda/user/Mar-2011/msg00096.html
> Else merge it in with gerbv as RS274-X only.
I don't like this idea. You have to have control over connections at least at
PCB level. I'd have it in gschem level.
Leve
used the CR5000 at my former job, we had lot's of troubles with
starpoints.
I think the workaround in gEDA is still a good way to go.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
On Tue, 5 Apr 2011 13:11:25 -0700
Russell Dill wrote:
> Perhaps I'll go with a solder blob jumper. A "drawbridge" component in
> PCB that is just a special type of trace would be really nice.
Yeah. I miss the concept of the "star point".
--
Levente K
a bit of an annoyance. Is there any other way of doing
> this? Maybe some kind of hacked component on an inner layer?
What I do is I place a 0Ohm resistor, and when the layout is ready, I short it
with a line. This will give DRC error, but I ignore it.
Levente
--
Kovacs Levente
Voic
hi,
Is there any way in gschem (or gattrib) to refactor netnames in a given set of
schematics?
Thnaks,
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman
new PCB, I have
to patch.
Browsing the source, I see that there is some movement to support non-copper
layers. I don't know the state of that. Still I think it is a good feature.
Thanks,
Levente
--
Levente Kovacs
http://levente.logonex.eu
_
. See the
instructions found in here.
http://www.seul.org/pipermail/geda-user/2010-September/048721.html
However, it is not a good idea to place vias close to the edge of
the board.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing
Hi,
I have rewritten the skip_drc patch (originally written by Ineiev) to apply
to the current git HEAD.
The original patch can be found here:
http://www.seul.org/pipermail/geda-user/2010-September/048721.html
My patch is attached.
Levente
diff --git a/src/action.c b/src/action.c
index
On Tue, 8 Mar 2011 17:37:32 -0800
yamazakir2 wrote:
> I wrote a custom netlister over a year ago that suppose this and
> hierarchical netlisting.
>
> http://spnet.code-fusion.net/
Can your netlister output a netlist for gEDA-PCB?
--
Kovacs Levente
Voice:
arance were
switched off. Just an idea.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
On Sat, 19 Feb 2011 12:37:53 -0500
DJ Delorie wrote:
> I use the polygon editor. With the new Holes tool, it's a lot easier.
You mean moving the vertex of a polygon? And waht are you doing when it is
hidden by a clearance?
Thanks,
Levente
--
Levente Kovacs
http://levente.lo
thout
displaying all the components on the outer layer.
Yes, I'd implement paste layers and non-conductive mechanical layers.
Yes, get rid of the current grouping mechanism.
I am really supporting this movement.
Thanks,
Levente
--
Kovacs Levente
Voice: +3
edasymbols.org, and I have
my own library as well.
http://git.logonex.eu/?p=library.git;a=tree;f=electronic
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman
ner/outer layer)).
> So far I came up with adding this information to the outline layer
> (but that doesn't end up in t
A text on copper layers? Outside the board area?
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing li
hpoly(selected)
you can do this by pressing the ":" key I guess.
> Thanks,
> David Carr
>
>
> ___
> geda-user mailing list
> geda-user@moria.seul.org
> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
>
-
eiver, but it can lead to misunderstanding. The other option
is to have a two-pin symbol, but the pattern will cause short circuit
when running the DRC.
Any suggestion?
Thanks,
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing
Hi list,
I discovered that PCB (the GTK HID) doesn't let me define boards greater than
10 mils.
Is it intentional?
N.B. I can make the board larger by editing the bcb file manually.
Thanks,
Levente
--
Levente Kovacs
http://levente.logon
e into pcb as I draw, making heavy use of the Ctrl-M measurement
> tool.
Yes. I too miss some GUI features, like "put this 2cm away", "copy that 10x
with 100mil spacing", etc.
> I will say that I am getting much more confident and much faster at
> creating footprints
have to have a table somewhere (at least one in your mind) which
links which supply is what. AVCC2=5V, AVCC1=12V etc.
Same goes for ground connections. AGND and DGND.
HTH,
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user m
Happy new year all!
Levente
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
much in my country anyway. I used them
> for eight years at a company a few years back.
When I was working for The Big Red German Automotive Electronic supplier
company back in 2008, they were using rectangular shapes for OPAs as well.
Levente
___
g
On Wed, 29 Dec 2010 23:48:00 -0800 (PST)
Oliver King-Smith wrote:
> I can measure the size of stuff using gerbv (there may be a better
> way to do this in pcb)
Use Ctrl+M to set an origin. You have relative coordinates printed next to the
cursor position.
Levente
--
Levente Kovac
have lost all credibility with
> me.
>
> New users - ask your questions without regret. There are no bad
> questions. Harvest the answers that are useful and ignore the crap.
Yes.
The "let us start a Vi vs. Emacs" comment was a joke.
--
Levente Kovacs
http://levente.logone
quot;what is gschem used for" etc.
So don't regret it, it is getting common.
Lets make a vi vs. emacs war!
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
my symbols light. Sometimes it doesn't even have
pin-numbers! After I made my design, I update all my symbols, and attributes
with an updater script, which pulls everything from a MySQL database.
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
${FILEBASE} ${PCBNAME}.pcb
later in the Makefile:
output: clean_output gerber pdf
cp ${FILEBASE}.pdf ${PCBOUTDIR}
tar -jcvf ${FILEBASE}_${DATE_S}.tar.bz2 ${PCBOUTDIR}
rar a ${FILEBASE}_${DATE_S}.rar ${PCBOUTDIR}
Levente
--
Levente Kovacs
http
tree;f=electronic/autolib/footprints;hb=HEAD
All of my footprints including the generated and the manually drawn ones is
located here:
http://git.logonex.eu/?p=library.git;a=tree;f=electronic/footprint;hb=HEAD
Levente
--
Levente Kovacs
http://l
ng to be connected to copper
objects (Via, line) when it is not connected to anything.
> Anyway, a flexible format (like xml) can accomodate everything,
> syntactically. I was thinking mostly about semantics, now.
Ok, I like your ideas.
Levente
_
nnoying that it saves the footprint with the coordinate equal to
the original position of the pcb. When you save this, and let gsch2pcb do the
work, it'll have some offset.
One have to edit the footprint manually with a text editor. :-(
This should be fixe
On Sat, 25 Dec 2010 18:14:27 +0100
Stephan Boettcher wrote:
> 132 150 132 250
I'd add a current netname to copper objects
132 150 132 250
Or something like this.
Levente
___
geda-user mailing list
geda-user@moria.seul.
fining a variable (=254e-9), and make all output HIDs use
> that to convert to PS-point or gerber units or whatever. Then
> introduce attributes of the layout file which sets the internal units
> and the default unit of the file.
Use 64bits intege
On Sun, 19 Dec 2010 22:12:30 -0500
DJ Delorie wrote:
>
> I changed the "overlapping vias" test in two ways...
>
> 1. Via copper is now allowed to overlap when vias are created. Via
>*drills* are not.
>
> 2. Vias which violate this rule in a *.pcb file are preserved at load
>time.
>
>
le name of the symbol in
> the multi attribute editor -- preferably in the header
I don't understand that.
> • pcb feature request: Make minimum track distance when off grid
> optional.
yay
--
Kovacs Levente
Voice: +36705071002
Why don't we put banners to our webpage:
"We need developers!"
"We need contributors!"
or something like that. There might be some out there, who would spend more
time on the project.
I've seen this on other FOSS pages.
might have the right buttons
> pushed too? FOSS is about community and openness and opportunities
> for all... right?
Negotiating with IEEE is a good idea. I wouldn't ask for money (first time),
but I'd ask them to put links to our website, or give them lectures about the
project.
I
On Thu, 09 Dec 2010 09:46:56 +0100
uv wrote:
> Dears,
>
> Is there any simple way to hide all component numbers on the board?
Settings->Hide names
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@mo
the
code as well. Which is important? We have 3D view, but we don't have negative
layers. I'm sorry, if I annoy anyone. I just want you to see my point.
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Hi,
Attached is a fiducial example.
Enjoy!
--
Levente Kovacs
http://levente.logonex.eu
fidu.fp
Description: Binary data
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
ids. It states that the centroid must be the center of the entire
footprint.
It gave me some information about the rotating angle.
I go and tweak my script.
Thank you again,
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
On Thu, 2 Dec 2010 14:41:01 -0500
DJ Delorie wrote:
> src/file.c
> WritePCBDataHeader()
Thanks
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
On Thu, 2 Dec 2010 12:40:39 -0500
DJ Delorie wrote:
> So change it :-)
I rather write scripts than modify the source...
Please note that my script now calculates placement angles as well! :-)
--
Levente Kovacs
http://levente.logonex.eu
___
g
On Thu, 2 Dec 2010 12:40:53 -0500
DJ Delorie wrote:
> Aside from editing the sources? No :-P
Okay... :-) Cold you tell me any point where to look?
Thanks...
Levente
--
Levente Kovacs
http://levente.logonex.eu
___
geda-user mailing list
g
rints are generated, and the zero point is the center of the
package. I think they are OK for pick point.
There are other footprints, which I made manually. In that case, I imagine the
best pick point and I put the zero point there.
Levente
--
Levente Kovacs
http://levente.l
Hi,
Is there any way to get PCB *NOT* to save cursor position?
Thanks,
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
eb-2009/msg00351.html
Yes, but as I pointed out earlier, it doesn't do what I want. It averages the
coordinates of the pins/pads, and it is not good when you working with
asymmetric element such as SOT223.
cheers,
Levente
--
Kovacs Levente
Voice: +36705071002
__
ld simply hang on to the UI to serve occasional display update
> requests from the other processes, and to kill off the auto routing
> processes on user command.
I think it is enough to make multiple threads. They can run on different CPU
cores. But I'm not usre.
Levente
--
Kovacs
age, which would be full of scripts, and user contributed stuff.
Even, it would be enough to have a web page full of user contributed links.
Just my EUR 0.02
Note that the script now outputs the placement side of a particular element as
well.
Levente
--
Kovacs Levente
On Tue, 30 Nov 2010 12:22:43 +0100
Kovacs Levente wrote:
> I have to put one of my boards into mass production. The factory
> require a text file which includes the coordinates of the SMDs, and
> their angle. The zero point must be at the lower left corner.
>
> I know the XY out
ts as
comments in the PCB file, so it could be used later? Then there'll be no need
such magic at the XY exporter. Just an idea.
Thanks,
Levente
--
Kovacs Levente
Voice: +36705071002
___
geda-user mailing list
geda-user@moria.seul.org
http://ww
On Mon, 29 Nov 2010 19:34:36 +0100
Michał Dwużnik wrote:
> there's no visible clue in case of such error - segfault
> does not seem very elegant...
You should file a bug report on SF project page. gEDA should not crash.
Levente
--
Levente Kovacs
http://levente
1 - 100 of 359 matches
Mail list logo
