thanks
On Tue, 9 Jun 2015 14:46:56 GMT "Bret Johnson"
writes:
> Look at the following web site:
>
> http://www.ecma-international.org/publications/standards/Standard.htm
>
> There are all kinds of standards there related to optical media (CD
> & DVD) -- both physical/media standards and softwa
Look at the following web site:
http://www.ecma-international.org/publications/standards/Standard.htm
There are all kinds of standards there related to optical media (CD & DVD) --
both physical/media standards and software/protocol standards.
_
I looked for books never found any. Didn't know what to search for.
There are large books filled with printer commands and how to
use them. Nothing for cd commands. There use to be books for
modem commands really scarce now.
cheers
DS
On Mon, 8 Jun 2015 20:41:37 +0200 Tom Ehlert
writes:
>
>
> On 6/8/2015 7:27 AM, Dale E Sterner wrote:
>> For printers its usually easy to find the control commands but
>> for cd units I've never seen them made available to the public.
>> Is there a command list published anywhere for cds.
>>
> Yes, it's called ATAPI and there exist a lot of different do
On 6/8/2015 7:27 AM, Dale E Sterner wrote:
> For printers its usually easy to find the control commands but
> for cd units I've never seen them made available to the public.
> Is there a command list published anywhere for cds.
>
Yes, it's called ATAPI and there exist a lot of different documents f
Hi,
On Mon, Jun 8, 2015 at 6:22 AM, Eric Auer wrote:
>
> http://www.bttr-software.de/forum/forum_entry.php?id=14268
>
> mentions a new version of the closed source variant of Jack's
> drivers, but it sounds as if that mainly has been tested with
> modern drives, suspecting that your drive uses ou
For printers its usually easy to find the control commands but
for cd units I've never seen them made available to the public.
Is there a command list published anywhere for cds.
cheers
DS
On Mon, 08 Jun 2015 13:22:43 +0200 Eric Auer writes:
>
> Hi John,
>
> http://www.bttr-software.de/forum/
Hi John,
http://www.bttr-software.de/forum/forum_entry.php?id=14268
mentions a new version of the closed source variant of Jack's
drivers, but it sounds as if that mainly has been tested with
modern drives, suspecting that your drive uses outdated audio
command dialects. In any case, maybe the u
On 04/06/2015 22:16, John Hupp wrote:
> But pursuing the driver-as-a-suspect angle anyway, I found a Lite-on DOS
> driver and installed that. CD playing now works.
That's nice to now - would you mind to specify please what mode of
CD-Audio is working for you exactly when using Lite-on, but not U
Hi,
I hate to dredge all of this up, but
On Thu, Jun 4, 2015 at 3:16 PM, John Hupp wrote:
>
> I correct myself. I was using ide-cd.sys on another machine I was
> working with a couple weeks ago. On this machine I have been using the
> default uide.sys.
>
> But pursuing the driver-as-a-sus
On 6/4/2015 4:29 PM, Rugxulo wrote:
> It could be an incorrect or buggy driver, dunno. The only way to know
> would be to try something else. But I'm not sure of a "good"
> alternative. I don't even know where to (reliably) find such old DOS
> drivers.
That seems to have been the case. In my post
Hi,
On Thu, Jun 4, 2015 at 1:06 PM, John Hupp wrote:
>
> Thanks for the clarifications. I could add though, that I tried "CDROM2
> PLAY01 F:" and it responded with something like "F: is not an audio
> drive, but < F: > is."
>
> The CD-ROM cable is known working (confirmed via Win 98), and I turn
I correct myself. I was using ide-cd.sys on another machine I was
working with a couple weeks ago. On this machine I have been using the
default uide.sys.
But pursuing the driver-as-a-suspect angle anyway, I found a Lite-on DOS
driver and installed that. CD playing now works. Thank you for t
Thanks for the clarifications. I could add though, that I tried "CDROM2
PLAY01 F:" and it responded with something like "F: is not an audio
drive, but < F: > is."
The CD-ROM cable is known working (confirmed via Win 98), and I turned
up the CD volume in the sound card mixer.
But it may be tha
Hi!
> With cdrom2ui, I ran these two commands:
>> CDROM2 PLAY01 < F: >
>> CDROM PLAY01 < F: >
>
> In both cases it responded "Error reading from drive F: data area:
> drive not ready."
Only the larger CDROM2 tool supports audio commands
and you have to omit the < >, so the proper command
would
On 6/4/2015 7:43 AM, Rugxulo wrote:
Hi,
On Wed, Jun 3, 2015 at 8:16 PM, John Hupp wrote:
With mpxplay now working, I am continuing with the quest to get a CD
player working.
I temporarily installed a Win 98 hard drive on this machine and got the
sound card working in Windows. I also establis
Hi,
On Wed, Jun 3, 2015 at 8:16 PM, John Hupp wrote:
>
> With mpxplay now working, I am continuing with the quest to get a CD
> player working.
>
> I temporarily installed a Win 98 hard drive on this machine and got the
> sound card working in Windows. I also established how to connect the
> sta
It occurs to me that at least some of the CD players have D: hard-coded
as the drive location. If you had a suggestion for which that was
configurable, that might help.
On 6/3/2015 9:16 PM, John Hupp wrote:
> With mpxplay now working, I am continuing with the quest to get a CD
> player working
With mpxplay now working, I am continuing with the quest to get a CD
player working.
I temporarily installed a Win 98 hard drive on this machine and got the
sound card working in Windows. I also established how to connect the
standard 4-pin audio CD connector on the CD-ROM drive with the
non-
19 matches
Mail list logo
