It occurs to me that at least some of the CD players have D: hard-coded
as the drive location. If you had a suggestion for which that was
configurable, that might help.
On 6/3/2015 9:16 PM, John Hupp wrote:
> With mpxplay now working, I am continuing with the quest to get a CD
> player working
With mpxplay now working, I am continuing with the quest to get a CD
player working.
I temporarily installed a Win 98 hard drive on this machine and got the
sound card working in Windows. I also established how to connect the
standard 4-pin audio CD connector on the CD-ROM drive with the
non-
I plowed all the way through the (interesting) article but didn't read
anything that seemed to help me. Most of it is about the Pro Audio
Spectrum (PAS) lineup.
In the meantime I installed a Win 98 hard drive on this machine and got
the sound card working in Windows. But I found out that "dig
I've been following this thread for some reason, and I finally figured
out why. I think I had a similar "multimedia PC" my parents bought
for me about 20 years ago (486SX 33MHz, 4MB RAM, 200MB HD, 2X CD-ROM
and Sound Card when these were still considered optional, DOS
6.22/Windows 3.11). And I re
I'm still working on trying to get audio CD's playing with this sound
card, a Media Vision Pro Sonic 16 (Jazz16 chipset). (The
earlier-reported other problems have now all been solved. I have sound
in DOOM and in mpxplayer.)
It occurred to me that this might be a cabling issue. The card has
It turns out that mpxplay was not hanging as I thought. It was instead
taking 30 seconds to load.
It turns out further that the precise format of the BLASTER variable is
important here. The Media Vision installer created SET BLASTER=A220 D1
I5 H3 T4. But mpxplay was choking on the fact that
Hi again,
On Wed, Jun 3, 2015 at 9:40 AM, Dale E Sterner wrote:
>
> I've quit working on it for a while. Tried every address and interupt I can
> think of.
> None work I think the chip is in off mode and needs to be turned on by
> windows.
> These sound drivers work on sound blaster cards but n
A step forward on one front. Mpxplay was not really hanging -- it was
taking 30 seconds to start!
I ran "mpxplay -sct" and it identified a SBP card (Soundblaster Pro). I
thought changing SoundcardName=AUTO to SoundcardName=SBP in mpxplay.ini
might fix the slow start, but that does not help as
Hi,
On Wed, Jun 3, 2015 at 1:22 PM, Eric Auer wrote:
>
>> For the Dell sound, its a chip soldered on the main board.
>
> You could check with PCISLEEP for DOS or LSPCI for Linux or any
> similar tool for Windows what chip it is.
Presumably by running "pcisleep l"?
http://ericauer.cosmodata.
To extend the audio hardware supported by DOSSound, there is also support
for
Soundblaster cards and their emulations. DOSSound first checks whether a
soundblaster
card is installed. If this is the case it will use that and not check for
AC'97 controllers. It uses
I/O address 220h, interrupt 7, and
Hi again,
> http://www.georgpotthast.de/dossound/
Thanks, interesting :-)
> For the Dell sound, its a chip soldered on the main board.
You could check with PCISLEEP for DOS or LSPCI for Linux or any
similar tool for Windows what chip it is. The DOSSOUND website
says, it is a WAV player for
Hello folks,
This quick message to announce a new release of uHex, my hex editor
targeted to DOS and x86 (which also happen to work on other systems, but
who cares about non-DOS systems anyway).
Big credits go to Alexey Voskov, who contributed some very nice patches
to this release of uHex.
N
On 6/3/2015 10:49 AM, Eric Auer wrote:
> Hi Dale and Don,
>
>> I have a Compaq Armada (Laptop) with a ESS1869 - I tried every
>> SB/ESS driver I could find then by chance I loaded DOSSOUND and it
>> worked. For my modern desktops with the oldest PCI cards (mostly ESS
>> or Yamaha) I can only get so
Hi again,
On Wed, Jun 3, 2015 at 4:56 AM, Don Flowers wrote:
>
> Thanks Mateusz, I will report this to Info-Zip
I don't know why you would contact them. It's probably not their bug.
In fact, I don't think it's a bug at all! Also, keep in mind that we
have no idea whether they still "maintain" (e
Hi again,
On Wed, Jun 3, 2015 at 9:08 AM, Dale E Sterner wrote:
>
> What I need for my Dell is a sound blaster pro driver that works on
> an ESS chip without windows being there. Windows turns the chip on
> somehow. The programs are for DOS running under windows. None of the
> drivers are for dos
Hi,
On Wed, Jun 3, 2015 at 9:08 AM, Dale E Sterner wrote:
>
> What I need for my Dell is a sound blaster pro driver that works on
> an ESS chip without windows being there. Windows turns the chip on
> somehow. The programs are for DOS running under windows. None of the
> drivers are for dos alone
Thank you
On Wed, 3 Jun 2015 11:10:43 -0400 Don Flowers writes:
> http://www.georgpotthast.de/dossound/
>
>
> On Wed, Jun 3, 2015 at 11:10 AM, Dale E Sterner
> wrote:
>
> > For the Dell sound, its a chip soldered on the main board.
> > I think it works like these stupid win printers; it wait
http://www.georgpotthast.de/dossound/
On Wed, Jun 3, 2015 at 11:10 AM, Dale E Sterner wrote:
> For the Dell sound, its a chip soldered on the main board.
> I think it works like these stupid win printers; it waits for
> windows to start it up. After all dos is dead isn't it - ha.
> I will have
For the Dell sound, its a chip soldered on the main board.
I think it works like these stupid win printers; it waits for
windows to start it up. After all dos is dead isn't it - ha.
I will have to search for this dossound. It might be the answer.
cheers
DS
On Wed, 03 Jun 2015 16:49:13 +0200 E
Hi Dale and Don,
> I have a Compaq Armada (Laptop) with a ESS1869 - I tried every
> SB/ESS driver I could find then by chance I loaded DOSSOUND and it
> worked. For my modern desktops with the oldest PCI cards (mostly ESS
> or Yamaha) I can only get sound through the internal speaker, but
> MPXPL
I have a Compaq Armada (Laptop) with a ESS1869 - I tried every SB/ESS
driver I could find then by chance I loaded DOSSOUND and it worked. For my
modern desktops with the oldest PCI cards (mostly ESS or Yamaha) I can only
get sound through the internal speaker, but MPXPLAY & QView work through
the l
I've quit working on it for a while. Tried every address and interupt I
can think of.
None work I think the chip is in off mode and needs to be turned on by
windows.
These sound drivers work on sound blaster cards but not on a laptop with
ESS.
cheers
DS
On Wed, 03 Jun 2015 16:18:52 +0200 Eric A
Hi!
> What I need for my Dell is a sound blaster pro driver that works on
> an ESS chip without windows being there. Windows turns the chip on
> somehow. The programs are for DOS running under windows. None of the
> drivers are for dos alone, even if they claim to be. Add windows to
> the backgr
What kind of Windows is it? It it's some 9x version, chances are that
the Windows drivers you have already are installing their DOS
counterpart in autoexec & config.sys files.
If that's the case, it would just be a matter of copying the required
files from your windows installation, note the ex
What I need for my Dell is a sound blaster pro driver that works on
an ESS chip without windows being there. Windows turns the chip on
somehow. The programs are for DOS running under windows. None of the
drivers are for dos alone, even if they claim to be. Add windows to
the background and they wo
Hi,
On Tue, Jun 2, 2015 at 4:51 PM, Rugxulo wrote:
>
> On Sun, May 31, 2015 at 4:52 PM, Dale E Sterner wrote:
>>
>> Have the same problem with a DELL laptop. Tried a few dozen drivers
>> and none worked.
>
> What stuff are you trying to run anyways? Games? Audio CD? MP3? WAV?
> MOD? MID? AVI?
>
Thanks Mateusz, I will report this to Info-Zip
On Wed, Jun 3, 2015 at 5:55 AM, Don Flowers wrote:
> I am currently running kubuntu 14.04 , 14.10 and Zorin OS 9 (14.04) but
> this started as early as 12.04. It is not the mirror per se - I can go back
> to what I thought was a bad download and (pk
I am currently running kubuntu 14.04 , 14.10 and Zorin OS 9 (14.04) but
this started as early as 12.04. It is not the mirror per se - I can go back
to what I thought was a bad download and (pk)unzip it and it turns out to
be complete.
On Wed, Jun 3, 2015 at 3:38 AM, Louis Santillan wrote:
> Also
Also, Info-Zip has a zipinfo binary. The verbose output (-v) might
tell you something.
On Wed, Jun 3, 2015 at 12:29 AM, Mateusz Viste wrote:
> This is something you might want to report to the Info-Zip team instead
> of here. Don't forget to provide them with an example of a file that is
> corre
This is something you might want to report to the Info-Zip team instead
of here. Don't forget to provide them with an example of a file that is
correctly decompressed by pkunzip, but not by unzip.
http://www.info-zip.org/
Mateusz
On 03/06/2015 03:52, Don Flowers wrote:
> I've recently become
30 matches
Mail list logo
