> Am 24.07.2018 um 21:13 schrieb Mike Tancsa :
>
> On 7/24/2018 2:48 PM, Stefan Bethke wrote:
>> The USB2 ports on the APU are not exposed in the case, and I don’t really
>> feel like trying to drill a hole into the case to try and get the adapter
>> cable out. The only ports available on the
On 7/24/2018 2:48 PM, Stefan Bethke wrote:
> The USB2 ports on the APU are not exposed in the case, and I don’t really
> feel like trying to drill a hole into the case to try and get the adapter
> cable out. The only ports available on the case are the two USB3 ports.
>
> How could I go about de
Am 15.07.2018 um 11:51 schrieb Stefan Bethke :
>
>>
>> On 07/13/18 22:57, Stefan Bethke wrote:
>>> 22:51:32.351126 usbus0.2
>>> DONE-BULK-EP=0002,SPD=HIGH,NFR=0,SLEN=0,IVAL=0,ERR=TIMEOUT
>>> 22:51:32.858070 usbus0.2
>>> SUBM-CTRL-EP=,SPD=HIGH,NFR=1,SLEN=8,IVAL=500
>>
>> The timeout
Am 14.07.2018 um 11:01 schrieb Hans Petter Selasky :
>
> On 07/13/18 22:57, Stefan Bethke wrote:
>> 22:51:32.351126 usbus0.2
>> DONE-BULK-EP=0002,SPD=HIGH,NFR=0,SLEN=0,IVAL=0,ERR=TIMEOUT
>> 22:51:32.858070 usbus0.2 SUBM-CTRL-EP=,SPD=HIGH,NFR=1,SLEN=8,IVAL=500
>
> The timeout might in
On 07/13/18 22:57, Stefan Bethke wrote:
22:51:32.351126 usbus0.2
DONE-BULK-EP=0002,SPD=HIGH,NFR=0,SLEN=0,IVAL=0,ERR=TIMEOUT
22:51:32.858070 usbus0.2 SUBM-CTRL-EP=,SPD=HIGH,NFR=1,SLEN=8,IVAL=500
The timeout might indicate an interrupt problem at the host controller.
There are some
Am 12.07.2018 um 09:27 schrieb Stefan Bethke :
>
> First, I had trouble installing from:
> ugen0.2: at usbus0
> umass0 on uhub1
> umass0: on usbus0
> umass0: SCSI over Bulk-Only; quirks = 0x8100
> umass0:2:0: Attached to scbus2
>
> This is all that gets probed on most attempts to connect the s
> Am 12.07.2018 um 09:27 schrieb Stefan Bethke :
>
> The other device I’m having trouble with is a Huawei E3272 LTE stick. In it’s
> default mode, it shows up as a umass device; using usb_modeswitch, it can be
> configured as a serial modem or an CDC ethernet device.
> [root@apu2 ~]# lsusb
> B
I’m having trouble using USB2 devices on the two USB3 ports on the back of the
APU2C4. I’m on 11.2-RELEASE.
The APU2 also has two USB2 ports, but they’re only on a pin header, and I’m
waiting for a cable to try them to see if there is a difference.
First, I had trouble installing from:
ugen0.2:
