On Sun, Feb 12, 2006 at 11:50:37PM +0100, Julius Hacker wrote:
> I've installed a 6.0 here on my computer.
> Alright, all works fine but at boot time I've to specify manually a root
> filesystem.
Can you post the messages printed just before you are asked to manually
specify the filesystem? There
Hi,
I use freebsd 6 on my main router without problems since it was released
by i am actually working on an embedded system, i built the minimal
system without much problems it now works well but the problem here is
that sometime it will just freze while booting and wait there for a
random tim
Michael W. Lucas wrote:
On Wed, Feb 08, 2006 at 10:58:45AM +0100, Gerard Milhaud wrote:
Michael W. Lucas wrote:
Hook up a serial console, and use script(1) to capture any panic
messages, etc. That'll give you a hint as to what's going on, and you
can see how to proceed.
Than
J. Buck Caldwell wrote:
[EMAIL PROTECTED] wrote:
Hi all,
First don't blame me for cross-posting on stable and x11 lists but
both seem
relevant for my problem.
I'm tracking 6-STABLE. Since one week, I can't use my computer
under FreeBSD.
The boot is OK, xdm screen is OK. But if I l
On Feb 13, 2006, at 7:33 AM, Julien Ammous wrote:
I use freebsd 6 on my main router without problems since it was
released by i am actually working on an embedded system, i built
the minimal system without much problems it now works well but the
problem here is that sometime it will just f
In fact i forgot this but I disabled acpi and apic (i don't even know
what apic is) in my current config, i tried different configurations
like disabling only acpi but the current proved to be the best. Without
disabling any of these the system nearly freeze everytime at same point
as described
On Mon, 2006-Feb-13 13:33:56 +0100, Julien Ammous wrote:
>I use freebsd 6 on my main router without problems since it was released
Is this 6.0-RELEASE, RELENG_6_0 or RELENG_6?
What motherboard are you using?
What CPU is it (you cut this out of your dmesg)?
>The freeze happens after this line:
>n
I am using the ports beta version of openssl in order to try to get OpenCA
working on a 6.1pre release system.
I buildworld and installworld with the following in /etc/make.conf
NO_OPENSSL=true
WITH_OPENSSL_PORT=yes
WITH_OPENSSL_BETA=yes
This doesn't install pkg_sign and pkg_check since they de
On Mon, Feb 13, 2006 at 12:47:50PM -0600, Bill Milford wrote:
> I am using the ports beta version of openssl in order to try to get OpenCA
> working on a 6.1pre release system.
>
> I buildworld and installworld with the following in /etc/make.conf
> NO_OPENSSL=true
> WITH_OPENSSL_PORT=yes
> WITH_
Peter Jeremy wrote:
On Mon, 2006-Feb-13 13:33:56 +0100, Julien Ammous wrote:
I use freebsd 6 on my main router without problems since it was released
Is this 6.0-RELEASE, RELENG_6_0 or RELENG_6?
What motherboard are you using?
What CPU is it (you cut this out of your dmesg)?
I use
Mike Jakubik wrote:
Steve Hodgson wrote:
Mike Jakubik wrote:
Jan 26 17:01:47 desktop kernel: smb_maperror: Unmapped error 1:158
Jan 26 17:02:18 desktop last message repeated 52 times
Jan 26 17:04:19 desktop last message repeated 646 times
Jan 26 17:14:20 desktop last message repeated 6342 time
Hello,
After reboot yesterday, my system suddenly started to flood syslog with
following message:
calcru: runtime went backwards from 1966191374 usec to 1966189453 usec
for pid 29988 (screen)
It's not only screen, i saw sh and su also, but in the last hour only
screen. A vmstat -i and the same 5
Sorry, i forgot to mention:
kern.osreldate: 600100
Frank
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Only time I've ever seen this problem is running on a VMWARE virtual
server. Is that the case here? If so, try:
sysctl kern.timecounter.hardware=TSC
That did the trick for me.
Frank Steinborn wrote:
Hello,
After reboot yesterday, my system suddenly started to flood syslog with
following mess
J. Buck Caldwell wrote:
> Only time I've ever seen this problem is running on a VMWARE virtual server.
This is not a VMware system. kern.timecounter.hardware is set to
ACPI-fast.
Frank
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.o
On Tue, Feb 14, 2006 at 12:09:34AM +0100 I heard the voice of
Frank Steinborn, and lo! it spake thus:
>
> cpu0: timer158483081 2000
That's not a storm, that's normal.
--
Matthew Fuller (MF4839) | [EMAIL PROTECTED]
Systems/Network Administrator | http://www.over
I have an odd problem... I've recently upgraded (binary) from FreeBSD
5.4 to FreeBSD 6.0 then CVSUP'ed to STABLE (6.1 Pre-release) a few
days ago, around February 10th it looks like (back when my time
worked right) :). I went through the whole thing like normal, rebuilt
world, built custom kern
Vinny Abello wrote:
[ ... ]
> I may try doing a cvsup of source and rebuilding again. My make.conf
> settings are pretty tame:
>
> CPUTYPE=pentium4
> CFLAGS= -O2 -pipe
> COPTFLAGS= -O -pipe
Remove the CPUTYPE declaration, or at least decrease it to just "pentium".
--
-Chuck
At 09:49 PM 2/13/2006, Chuck Swiger wrote:
Vinny Abello wrote:
[ ... ]
> I may try doing a cvsup of source and rebuilding again. My make.conf
> settings are pretty tame:
>
> CPUTYPE=pentium4
> CFLAGS= -O2 -pipe
> COPTFLAGS= -O -pipe
Remove the CPUTYPE declaration, or at least decrease it to just
At 10:04 PM 2/13/2006, Vinny Abello wrote:
At 09:49 PM 2/13/2006, Chuck Swiger wrote:
Vinny Abello wrote:
[ ... ]
> I may try doing a cvsup of source and rebuilding again. My make.conf
> settings are pretty tame:
>
> CPUTYPE=pentium4
> CFLAGS= -O2 -pipe
> COPTFLAGS= -O -pipe
Remove the CPUTYPE
Vinny Abello wrote:
[ ... ]
> Nevermind. I just answered my own question. I should have RTFM more
> carefully. :)
:-)
> If CPUTYPE is defined in your /etc/make.conf, make sure to use the
> "?=" instead of the "=" assignment operator, so that buildworld can
> override the CPUTYPE i
At 10:25 PM 2/13/2006, Chuck Swiger wrote:
Vinny Abello wrote:
[ ... ]
> Nevermind. I just answered my own question. I should have RTFM more
> carefully. :)
:-)
> If CPUTYPE is defined in your /etc/make.conf, make sure to use the
> "?=" instead of the "=" assignment operator, so that bu
Hi folks,
Okay, OpenOffice 2.0 is now spewing out the error message:
I18N: Operating system doesn't support locale "en_US"
Hmmm. So, from what I understand from the documentation I have
looked at, this is because I do not have an entry in the /etc/
login.conf file covering this
Hello,
I've been having kernel panics when I use one particular USB flash drive
(LEXAR MEDIA JUMPDRIVE2, rev 2.00/1.25, addr 2) with FreeBSD
6.1-PRERELEASE (See [1] below). All I have to do to get the kernel to
panic is to insert and remove the drive from the USB port 2 or 3 times
(without moun
Hello,
I installed FreeBSD-6.0-RELEASE on my laptop and cvsuped to FreeBSD-STABLE. It
is working pretty much stable.
If possible I would like to migrate existing whole filesystem and partitions to
GEOM GELI based encrypted filesystem.
How can I to convert/migrate to GEOM GELI without erase/del
On Mon, Feb 13, 2006 at 09:32:18PM -0600, Bruce Burden wrote:
> Okay, OpenOffice 2.0 is now spewing out the error message:
>
> I18N: Operating system doesn't support locale "en_US"
>
> Hmmm. So, from what I understand from the documentation I have
> looked at, this is because I do not h
http://events.ccc.de/congress/2005/fahrplan/attachments/586-paper_Complete_Hard_Disk_Encryption.pdf
That pdf covers it pretty well.
On 2/13/06, Balgansuren Batsukh <[EMAIL PROTECTED]> wrote:
>
> Hello,
>
> I installed FreeBSD-6.0-RELEASE on my laptop and cvsuped to
> FreeBSD-STABLE. It is working
At 10:28 PM 2/13/2006, Vinny Abello wrote:
At 10:25 PM 2/13/2006, Chuck Swiger wrote:
Vinny Abello wrote:
[ ... ]
> Nevermind. I just answered my own question. I should have RTFM more
> carefully. :)
:-)
> If CPUTYPE is defined in your /etc/make.conf, make sure to use the
> "?=" instea
28 matches
Mail list logo
