> > Quite correct. I have done this for several perl versions now, and
> > the work involved is quite scarey.
>
> Not that I'm a fan of the GPL, but wouldn't importation of gmake
> into the toolchain that gets installed by default help this problem
> along enormously?
No. It will make it wor
On Tue, 26 Dec 2000, Rudy Gingles wrote:
> I recently went through the same thing (still having intermittent sound
> problems, but it's getting there). /dev/sndstats seems to be created when
> you do sh MAKEDEV snd0. That created all the sound devices (mixer, dsp,
> etc.).
>
> Rudyatek
... Tha
Hi all,
I'd like to add some of my experiences with BP6. I tried to create
software RAID using vinum (I tried RAID-1 and RAID-5) on 4x14GB drives
connected to HighPoint ATA66 in UDMA66 mode. I experienced
serious problems until I overclocked the bus to 78 MHz. I wasn't
able even to do newfs on th
On Wed, 27 Dec 2000, Soren Schmidt wrote:
> It seems David W. Chapman Jr. wrote:
>
> You guys are not overclocking are you ??
>
> > I've recently seen the same problem on 4.2-stable, probably a early version
> > of it, I go to make my kernel and it locks up for a few mins, then I get
> > some
> You guys are not overclocking are you ??
No! Just because I have a BP6 doesn't mean I'm overclocking it. The HPT
controller has always done this. Would more messages help, eg bootverbose?
I tried DDB on 4.0 and ctrl-esc didn't get out of this state.
--Ben
To Unsubscribe: send mail to [EMA
I've got two mobos with VIA MVP3 chipsets on-board. As these systems
(until recently) had only SCSI peripherals, I didn't notice any problem.
However, when I added an IDE CDRW drive, I got these very strange system
lock-ups/hangs. Specifically, this was an FIC VA-503+ mobo, with a
450MHz K6-2 C
please i need help...
that hpt370 is starting to piss me off. i've been searching up and down the
archives but all i did find was a mail by someone who modified line 212 in
/usr/src/sys/dev/ata/ata-raid.c. i did that too and rebuilt the kernel but
that didnt quite do the job.
i have 2 HDDs, o
> "MA" == Matthias Andree <[EMAIL PROTECTED]> writes:
>> --cut here--
>> me:\
>> :umask=0707:\
>> :tc=default:
>> --cut here--
MA> Can people change the permissions afterwards or the umask before
MA> uploading, thus circumventing these settings? I'm not too deep in ftpd.
Hmmm. Yes. Accordi
On Wed, 27 Dec 2000, Vivek Khera wrote:
> MA> Can people change the permissions afterwards or the umask before
> MA> uploading, thus circumventing these settings? I'm not too deep in ftpd.
>
> Hmmm. Yes. According to the ftpd man page, there are commands "SITE
> CHMOD" and "SITE UMASK" that wil
On Wed, 27 Dec 2000, Louis A. Mamakos wrote:
>
> I've got two mobos with VIA MVP3 chipsets on-board. As these systems
> (until recently) had only SCSI peripherals, I didn't notice any problem.
> However, when I added an IDE CDRW drive, I got these very strange system
> lock-ups/hangs. Specific
is it enough if I make make buildworld ?
anyway thanks for the help. now I could compile kernel
without any problem. I didnt know that I have to make world etc.
Since when this is required? (or is it required?)
On Wed, 27 Dec 2000, Donn Miller wrote:
> On Wed, 27 Dec 2000, Evren Yurtesen wrote:
On Wed, 27 Dec 2000, Evren Yurtesen wrote:
> is it enough if I make make buildworld ?
>
> anyway thanks for the help. now I could compile kernel
> without any problem. I didnt know that I have to make world etc.
> Since when this is required? (or is it required?)
>
I knew it was the problem, sin
Soren Schmidt wrote:
>
> It seems Justin W. Pauler wrote:
> > I've heard tell that there are problems with the VIA chipset and UDMA on
> > FreeBSD. Is this true, and if so, what is the problem with?
>
> Hmm, there are no open problems as far as I'm aware...
>
> > FreeBSD 4.2-STABLE #0: Fri De
I have a KT7 with an athlon 1.1, no problems with ATA66, don't have a 100
drive though. Works fine, does make worlds in a little over an hour with
384mb of pc133, but I do have to downclock the pc133 to 100 because these
via chips have some problem with agp and pc133 at the moment.
>
> I have an
> Date: Wed, 27 Dec 2000 16:44:08 -0500 (EST)
> From: Donn Miller <[EMAIL PROTECTED]>
> Sender: [EMAIL PROTECTED]
>
> On Wed, 27 Dec 2000, Evren Yurtesen wrote:
>
> > is it enough if I make make buildworld ?
> >
> > anyway thanks for the help. now I could compile kernel
> > without any problem.
"David W. Chapman Jr." wrote:
>
> I have a KT7 with an athlon 1.1, no problems with ATA66, don't have a 100
> drive though. Works fine, does make worlds in a little over an hour with
> 384mb of pc133, but I do have to downclock the pc133 to 100 because these
> via chips have some problem with
16 matches
Mail list logo
