On Tue, 26 Jan 2010 08:59:27 -0800 Chuck Swiger wrote
about Re: ZFS "zpool replace" problems:
CS> As a general matter of maintaining RAID systems, however, the approach
CS> to upgrading drive firmware on members of a RAID array should be to
CS> take down the entire contai
On Tue, 26 Jan 2010 08:46:19 -0800 Jeremy Chadwick
wrote about Re: ZFS "zpool replace" problems:
JC> - zpool offline
JC> - atacontrol detach ataX (where X = channel associated with disk)
JC> - Physically remove bad disk
JC> - Physically insert new disk
JC> - Wait 15 se
Hi--
On Jan 26, 2010, at 8:25 AM, Gerrit Kühn wrote:
> CS> There's your problem-- the Silicon Image 3112/4 chips are remarkably
> CS> buggy and exhibit data corruption:
>
> Hm, sure?
I'm sure that the SII 3112 is buggy.
I am not sure that it is the primary or only cause of the problems you descr
On Tue, Jan 26, 2010 at 04:03:20PM +0100, Gerrit Kühn wrote:
> On Tue, 26 Jan 2010 06:30:21 -0800 Jeremy Chadwick
> wrote about Re: ZFS "zpool replace" problems:
> JC> 2) How did you attach ad18? Did you tell the system about it using
> JC>atacontrol? If s
On Tue, 26 Jan 2010 08:27:37 -0800 Jeremy Chadwick
wrote about Re: ZFS "zpool replace" problems:
JC> Well, to be fair, we can't be 100% certain he got bit by that bug.
JC> It's possible/likely, but we don't know for certain at this point. We
JC> also don&#
On Tue, Jan 26, 2010 at 08:15:27AM -0800, Chuck Swiger wrote:
> Hi--
>
> On Jan 26, 2010, at 7:03 AM, Gerrit Kühn wrote:
> [ ... ]
> > atap...@pci0:3:6:0: class=0x010401 card=0x02409005 chip=0x02401095
> > rev=0x02 hdr=0x00 vendor = 'Silicon Image Inc (Was: CMD Technology
> > Inc)' device
On Tue, 26 Jan 2010 08:15:27 -0800 Chuck Swiger wrote
about Re: ZFS "zpool replace" problems:
CS> > Meanwhile I took out the ad18 drive again and tried to use a
CS> > different drive. But that was listed as "UNAVAIL" with corrupted
CS> > data by zfs.
CS>
Hi--
On Jan 26, 2010, at 7:03 AM, Gerrit Kühn wrote:
[ ... ]
> atap...@pci0:3:6:0: class=0x010401 card=0x02409005 chip=0x02401095
> rev=0x02 hdr=0x00 vendor = 'Silicon Image Inc (Was: CMD Technology
> Inc)' device = 'SATA/Raid controller(2XSATA150) (SIL3112)'
>class = mass sto
On Tue, 26 Jan 2010 06:30:21 -0800 Jeremy Chadwick
wrote about Re: ZFS "zpool replace" problems:
JC> I'm removing the In-Reply-To mail headers for this thread, as you've
JC> now hijacked it for a different purpose. Please don't do this; start
JC> a new threa
I'm removing the In-Reply-To mail headers for this thread, as you've now
hijacked it for a different purpose. Please don't do this; start a new
thread altogether. :-)
On Tue, Jan 26, 2010 at 02:57:20PM +0100, Gerrit Kühn wrote:
> I am still busy replacing RE2-disks with updated drives. I came ac
10 matches
Mail list logo
