> I've observed the slowness only on the local console, I haven't tested
> the seriel console. Put the FreeBSD legcay installation usb stick into
> the box, select it as boot device and watch the cursor spinning for
> about 10 minutens until the kernel boots. Do the same with an UEFI
> installation
Hello,
I've observed the slowness only on the local console, I haven't tested
the seriel console. Put the FreeBSD legcay installation usb stick into
the box, select it as boot device and watch the cursor spinning for
about 10 minutens until the kernel boots. Do the same with an UEFI
installation st
> On 14 Feb 2016, at 11:52, Yamagi Burmeister wrote:
>
> Hello,
> this is a known problem with Intel Skylake CPUs. Legacy boot os dead
> slow, UEFI boot is blazing fast. Have a look at this thread, it contains
> some more informations:
>
> https://lists.freebsd.org/pipermail/freebsd-current/201
Hello,
this is a known problem with Intel Skylake CPUs. Legacy boot os dead
slow, UEFI boot is blazing fast. Have a look at this thread, it contains
some more informations:
https://lists.freebsd.org/pipermail/freebsd-current/2015-December/059037.html
As far as I know now one has found / analyzed
It looks like my reply to the verbose dmesg.boot did not make it to
the list. I was able to boot the PC from a MSDOS 6.22 floppy using a
USB floppy drive. I also can load OpenBSD 5.8 on this PC and it boots
normally.
My verbose dmesg.boot:
Table 'FACP' at 0xbf24f4b8
Table 'APIC' at 0xbf24f5c8
A
On 12/02/2016 20:36, Thomas Laus wrote:
I have a new Asus H170-Plus-D3 motherboard that will be used for a DOM0 Xen
Server. It uses an Intel i5-6300 processor and a Samsung 840 EVO SSD. I
would like to use ZFS on this new installation. The Xen Kernel does not
have UEFI support at this time, so
> I have a new Asus H170-Plus-D3 motherboard that will be used for a DOM0 Xen
> Server. It uses an Intel i5-6300 processor and a Samsung 840 EVO SSD. I
> would like to use ZFS on this new installation. The Xen Kernel does not
> have UEFI support at this time, so I installed FreeBSD CURRENT r2953
