Re: Signal 11 on 3.3 installation

1999-09-27 Thread Parag Patel
A little while ago, I was install 3.2-RELEASE from the CD-ROMs onto a system without the ability to boot from the CD-ROM. So I'd made the usual two floppies and installed using them. I was having problems like this reported one too. It would crash with similar errors in the middle of gunzip/ta

Re: Signal 11 on 3.3 installation

1999-09-25 Thread Daniel C. Sobral
Michael Endsley wrote: > > Mike, > Here is what is happening. Here is what you are doing wrong when reporting it. When it catches sig 11, it shows a hole bunch of meaningless data, right? Well, this meaningless data is the stuff we use to trace bugs. Until you provide that information, we cannot

Re: Signal 11 on 3.3 installation

1999-09-25 Thread Michael A. Endsley
At 10:18 PM 09/25/1999 +0200, Bart Smit wrote: >On Sun, 26 Sep 1999, Daniel C. Sobral wrote: > >> Exact same spot? Then it is *NOT* a RAM problem. > >He said it happened just after specifying the parameters for the network. >NIC problem perhaps? > >(not cc-ing the list; I'm hardly convinced that

Re: Signal 11 on 3.3 installation

1999-09-25 Thread Michael Endsley
. What is strange is that today I tried a new installation of 3.3 on the Aptiva and again it caught the signal 11. However, the program worked flawlessly when I chose to upgrade my 3.2 system. I hope this makes sense :) Mike On Sat, 25 September 1999, Mike Smith wrote: > Subject: Re: Signal

Re: Signal 11 on 3.3 installation

1999-09-25 Thread Mike Smith
> Just a update on 3.3 > Today (25Sept) I downloaded the latest snap of 3.3 (19990925) and tried to > install it. I got the same signal 11 at the exact same spot as before! To > help with memory, it was just after filling in the blanks on the network > configuration screen. When I then clicked on

Re: Signal 11 on 3.3 installation

1999-09-25 Thread mandm
Just a update on 3.3 Today (25Sept) I downloaded the latest snap of 3.3 (19990925) and tried to install it. I got the same signal 11 at the exact same spot as before! To help with memory, it was just after filling in the blanks on the network configuration screen. When I then clicked on the ok but

Signal 11 on 3.3 installation

1999-09-23 Thread Michael A. Endsley
I tried a new installation of 3.3 (19990918)tonight and got the signal 11. I just finished the data on the screen for machine name, domain, ip address, gateway, etc. I clicked the ok button and got a message about signal 11 and the system was shutting down. I checked tty1 and the last line said: "