On Sun, 2012-08-12 at 12:42 -0400, Wajih Ahmed wrote:
> Ok at the boot loader prompt i did as you suggested
>
> set hint.ata.0.mode="UDMA33"
>
> And that change did take effect as evedint by
>
>ada0: 33.300MB/s transfers (UDMA2, PIO 512bytes)
>
> Unfortunately i still get the e
Ok at the boot loader prompt i did as you suggested
set hint.ata.0.mode="UDMA33"
And that change did take effect as evedint by
ada0: 33.300MB/s transfers (UDMA2, PIO 512bytes)
Unfortunately i still get the error
.ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT)
On Sun, 2012-08-12 at 12:29 -0400, Wajih Ahmed wrote:
> Thank you. I'll try it out. One question though. How do i modify the
> loader.conf on the usb image from which i am booting? Is there somethign i
> can change in the boot loader? If this is RTFM kindly point me to it.
You can enter the v
Thank you. I'll try it out. One question though. How do i modify the
loader.conf on the usb image from which i am booting? Is there somethign i
can change in the boot loader? If this is RTFM kindly point me to it.
On Sun, Aug 12, 2012 at 11:45 AM, Ian Lepore
wrote:
> On Sun, 2012-08-12 at
On Sun, 2012-08-12 at 10:57 -0400, Wajih Ahmed wrote:
> I have a Dell D420 laptop with the ZIF interface and uses a 1.8" PATA
> drive. I purchased a Kingspec 16GB SSD and installed it. The BIOS
> recogonizes the drive. I am using the USB image to boot in verbose mode.
> Upon boot the disk is rec
