Yea, thats what I meant, this mcsd :-\ course must be turning me into
yet another zombie
Matthias Buelow wrote:
Jayton Garnett <[EMAIL PROTECTED]> writes:
Are you using the correct cables? I had a problem when I changed system
cases and used the wrong cable when I put the drives back in
> Michael C. Shultz wrote:
> >I have one IDE and two SATA drives in my system. With
> >FreeBSD 5.4 the system would not boot from the SATA
> >drive so I use the IDE as the primary then mount
> >the SATA drives in fstab. I tried upgrading to RELENG_6
> >and with the new kernel one of the SATA dri
Jayton Garnett <[EMAIL PROTECTED]> writes:
>Are you using the correct cables? I had a problem when I changed system
>cases and used the wrong cable when I put the drives back in (IDE cable
>instead of a SATA cable) I now have FreeBSD 5.4-p3 booting up fine and
You mean, an old IDE cable vs. a
Are you using the correct cables? I had a problem when I changed system
cases and used the wrong cable when I put the drives back in (IDE cable
instead of a SATA cable) I now have FreeBSD 5.4-p3 booting up fine and
without error. I think this is a common problem, where people forget
about the m
I have one IDE and two SATA drives in my system. With
FreeBSD 5.4 the system would not boot from the SATA
drive so I use the IDE as the primary then mount
the SATA drives in fstab. I tried upgrading to RELENG_6
and with the new kernel one of the SATA drives errors
out and so can't be mounted. I
