On Thu, 4 May 2000, Mike Smith wrote:
> That's OK. At this point in time, I don't have any outstanding reports
> of problems with the MegaRAID driver in 4-stable. The 4-release version
> is capable of locking up the adapter, however.
Here is the rawio stats for a 3.4-STABLE box running a De
- Original Message -
From: "Mike Smith" <[EMAIL PROTECTED]>
| > Ok. I know how I'm going to have to deal with this; the problem is that
| > we only use 16 of the 17 available S/G segments (so I can pack the S/G
| > tables without crossing page boundaries). This is going to take a
littl
> > > Well, perhaps not. Running the old firmware, 2.39, my install of 4.0 fails
> > > early on copying files:
> > >
> > > bus_dmamap_load : Too many segs! buf_len = 0x1
> > > mlx0 : I/O error -- attempt to write beyond end of drive
> > >
> > > Any idea what these mean?
> >
> > The 2.x fi
> > Well, perhaps not. Running the old firmware, 2.39, my install of 4.0 fails
> > early on copying files:
> >
> > bus_dmamap_load : Too many segs! buf_len = 0x1
> > mlx0 : I/O error -- attempt to write beyond end of drive
> >
> > Any idea what these mean?
>
> The 2.x firmware only suppor
>
> | Well, I have good news, I think. The mlx driver _seems_ to work as-is
> (from
> | a kernel built with 4.0-STABLE). I get a warning about an old BIOS rev,
> but
> | it looks functional. The driver reported the correct logical drive size
> and
> | no other errors.
>
> Well, perhaps not.
| Well, perhaps not. Running the old firmware, 2.39, my install of 4.0
fails
| early on copying files:
|
| bus_dmamap_load : Too many segs! buf_len = 0x1
| mlx0 : I/O error -- attempt to write beyond end of drive
|
| Any idea what these mean?
|
| I flashed it with the newest Mylex firmwar
