Pyun YongHyeon wrote:
> Ok, I've reproduced it, it seems that it happens when sender and
> receiver has advertised different MSS. Try attached patch and let
> me know how it goes on your setup.
The patch works. The problem is gone. Thank you.
Björn
_
I wrote:
>
>> If you can easily reproduce the issue, can you capture stalled TCP
>> session with tcpdump on receiving host?(Make sure to disable Rx
>> checksum offload prior to capturing the session.)
>
> I transferred a 256 kiB file and these are the tcpdumps:
>
> http://www.alpha-tierchen.de/~bko
pyu...@gmail.com wrote:
> If you can easily reproduce the issue, can you capture stalled TCP
> session with tcpdump on receiving host?(Make sure to disable Rx
> checksum offload prior to capturing the session.)
I transferred a 256 kiB file and these are the tcpdumps:
http://www.alpha-tierchen.de
pyu...@gmail.com wrote:
> Could you disable TSO and try again?('ifconfig fxp0 -tso' will do
> the job).
Yes, disabling TSO helps. That's a reasonable workaround for me. Thanks.
Let me know if you need further information in case you want to make
changes to the fxp driver regarding this problem.
Hello,
after upgrading my system from 7.1-RELEASE to recent RELENG_7 I noticed
stalled network transfers in certain cases. I have an Intel PRO/100
ethernet adapter (card=0x00408086 chip=0x12298086 rev=0x0c). In general
networking works fine. I can ping hosts, surf on websites and so on. But
if I s
Maximiliano Combina wrote:
I have found a driver to mount those partitions as
read-only (I dont have the link here :( ), but I have not tried the
driver myself.
Does anyone know a way to mount a reiserfs partition from freebsd? To
write in one of those partitions?
This read-only driver and its
Ivan wrote:
> i tried to install freebsd from a bootable cd. but the installer
> does not find my sata drive. the promise fastrak driver is not
> listed in the active on inactive drivers list. what can i do?
So I guess 378 is a newer ATA controller chip. It is not supported (yet?) by
FreeBSD 4.1
Ivan wrote:
> hi, i'd like to install freebsd 4.10 on my computer and use it like a web
> and mail server. my problem is that i need a promise fastrak sata 378 or
> compatible driver to be able to install freebsd on my sata drive. is there
> such a driver? i'm new to freebsd and unix. can anybody
Francis PALLINI wrote:
> The RAID SATA technology support in (Free|Open)BSD seems recent (I mean
> 4.10).
There is no need for "SATA technology support". Its an affair between device
and controller. FreeBSD-STABLE knows a few controller chips which are used
with the SATA interface. Also a lot of
Hello,
first of all:
THIS FILESYSTEM TYPE IS NOT YET FULLY SUPPORTED
(READ: IT DOESN'T WORK) AND USING IT MAY, IN FACT,
DESTROY DATA ON YOUR SYSTEM. USE AT YOUR OWN RISK.
BEWARE OF DOG. SLIPPERY WHEN WET.
My experience:
I had much less problems with unionfs -b, even with FreeBSD 4.10, to mount
10 matches
Mail list logo
