forward this to kris kennaway

you know i been readin your so called answers to hard pressed freebsd questions, and all of you are saying goto a mailing list for answer. you fuckin retards, theh way you answer these EU's is appauling, you arent tech support in my book. you give half witted, pass the ball answers. you suck. t

mouse is not working

i'm using a nvidia geforce intergrated graphics motherboard, usb microsoft wheel optical mouse. chipset is nvidia geforce how do i set up the mouse to work? george. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-

Boot hangs on ZOTAC ZBOX (Via Nano X2)

Hi, I've got a ZOTAC ZBOX nano VD01 (http://www.zotacusa.com/zbox-nano-vd01.html). The boot process (9.1-RELEASE, amd64) hangs after "Timecounters tick every 1.000 msec". I tried with ACPI off, but it crashes. Here's a pic with "Verbose" turned on: http://i.imgur.com/DQJkmoV.jpg I've found this

how do you get gnustep to run?

horizontal frequencies. if i can't find the frequencies, are there default values that i can use to create that file. www.windowmaker.info site seems to be down thanks, g. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/m

installing ssh after freebsd has been installed?

g protocol version 2. Could not load host key sshd: no hostkeys available -- exiting. do i need to reinstall the os, 6.1, in-order for it to setup ssh and create those files, ssh_host_ ...? g. ___ freebsd-questions@freebsd.org mailing

Re: installing ssh after freebsd has been installed?

Thanks, Bill and Matthew, your suggestions did the trick. g. On Sep 6, 2006, at 2:41 PM, Bill Moran wrote: In response to g <[EMAIL PROTECTED]>: how do is install ssh once i've installed freebsd 6.1? i used sysinstall. check ssh in the networking section. ok'ed my and ex

Xorg install

Monitor"Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection *** thanks, g. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Xorg install

how do i do that? i'm a newbie. g. On Sep 6, 2006, at 10:22 PM, Pablo Mora wrote: On 9/6/06, g <[EMAIL PROTECTED]> wrote: i'm trying to install xorg. using chapter 5, i installed Xorg, but it seems to break something. with the default install of 6.1, x window system starts

Re: Xorg install

i'm sorry what is top posting? if it is offensive, i certainly don't mean to do it. thanks for the advise. g. On Sep 7, 2006, at 6:31 AM, Gerard Seibert wrote: g wrote: how do i do that? i'm a newbie. Well, for starters, try not top posting. Are you familiar with

Best laptop for Freebsd

Hi Folks, Well I stayed off the beer and other sinful delights for a while (month or so P:) and have raked together enough cash to buy a new laptop. For those of you out there with experience what would you advise. The plan would be for ..unfortunately Windoze (vba stuff for work), Freebsd, and mo

Re: What can I use to study Ethernet frames?

[EMAIL PROTECTED] wrote: Which program can I use to study Ethernet frames? Elisej Babenko ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Slow Terminal Switching

Hi, In my new install 6.2, I have come across a strange problem. It takes a few seconds to switch between virtual terminals. I press alt f2 or f3 etc and it takes a few instances for the terminal to switch. It used to be instantaneous. Can anyone give me a pointer on this one? thanks G

newbie. how to compile gcc-4.1.1

hi everyone, i'm trying to compile and install gcc-4.1.1 from the port section. errors: Syntax error: redirection unexpected *** Error code 2 Stop in /usr/home/g/Applications/gcc-4 ... /build-i386-unknown- freebsd6.1/fixincludes. *** Error code 1 i tried making the object code in an

Newbie Alert: compiling problem with gcc-4.1.1

*** config.status: creating config.h gcc -c -g -O2 -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing- prototypes -Wold-style-definition -Wmissing-format-attribute - pedantic -Wno-long-long -DHAVE_CONFIG_H -I. -I/usr/ports/gcc-4.1.1/ fixincludes -I../include -I/usr/ports/gcc-4.1.1/fixincludes

Re: newbie. how to compile gcc-4.1.1

i downloaded the file from gnu. ok, i see the directory. thanks, i will try using the freebsd instruction. g. On Sep 2, 2006, at 10:33 AM, Kris Kennaway wrote: On Sat, Sep 02, 2006 at 10:17:27AM -0400, g wrote: ok, i got a snapshot of the make bootstrap it shows the error. ??? Well, you

Newbie: compiled and installed gcc-4.2 but ...

3.4.4 [FreeBSD] 20050518 i would like to replace this version with the gcc-4.2, or at least use the 4.2 version on occasion. thank everyone, g. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

Re: Newbie: compiled and installed gcc-4.2 but ...

Thanks, Sean. g. On Sep 2, 2006, at 2:32 PM, Sean M. wrote: Use gcc42, g++42, etc. --- g <[EMAIL PROTECTED]> wrote: i compiled and installed gcc-4.2 using the instruction on the FreeBSD web site. thanks to kris, who directed me to /usr/ports/lang/ gcc ... and pointed out the

how do you get gnustep to run?

Freebsd 6.1 gnustep installed from the /usr/ports/lang/ make make install but when i type startx, i get the x windowing system. what do i need to do to get gnustep running and running at startup, when i turn on the computer. g. ___ freebsd

a technical how to

So, I hope this is the right address for this type of question. If not would you please forward this and/or let me know the correct address. Thanks, Here is the question: How to truncate a file from the begining to a certain point in the file? __ Do you Yahoo!? N

IPFW Firewall Question

1.  I need help to reconfigure my firewall on the server using BSD's ipfw here is part of the configuration file so far that the Co-lo people put in. 2. short of a reboot how do you start stop and restart the  firewall #!/usr/local/bin/bash export IPF="ipfw -q add" ports="11 21 22 23 25 37 4

Image Programs

Hello  does anyone know the following 1.  Does Freebsd have a program like Photoshop avail to use a copy-left GNU license type ? and a form of Thumbsplus which allows me to do rudimentary picture manipulations changing file type, cropping etc.  i have all the 3d programs but not these 2 basic o

Re: Subversion and FreeBSD permission problems

David Kelly wrote: On Mar 23, 2008, at 11:01 AM, Darrell Blake wrote: If I move into a temp directory and do "svn checkout file:///usr/local/svn/repository/TestProject" it works fine but if I do "svn svn://127.0.0.1/TestProject" I get an error stating "svn: Can't connect to host '127.0.0.1': Co

Re: Subversion and FreeBSD permission problems

Hi Darrell, Please don't top post. Further help follows. Darrell Blake wrote: I'm SSHing to my server from my desktop as I haven't actually got a monitor on the server but when I do a sockstat I get the following output regarding svn: svusersvnserve 846 3 tcp6 *:3690

Re: Subversion and FreeBSD permission problems

Hi again, Darrell Blake wrote: I'm SSHing to my server from my desktop as I haven't actually got a monitor on the server but when I do a sockstat I get the following output regarding svn: svusersvnserve 846 3 tcp6 *:3690*:* I jus

Re: MP3/MP4

Dear customer, We are pleased to get to know that you are presently on the market for MP4 and other digital products, and as the *largest specialized OEM manufacturer of mp3/MP4/DPF and other digital products *and exporter for these products in China, we sincerel

Alpha 6.0 Install...

Dear Sir or Madam, I am trying to install FreeBSD for Alpha, release 6.0. I have read the documentation, but nothing I've read gives me any hints about the issue I'm having with boot/install from CDROM. I have attached a copy of my console output, which should give a good look at the gory deta

jdk15 on 6.0

FreeBSD Land: I've seen this question asked on this very list, and once or twice on the web, but have yet to find a solution. I'm attempting to compile jdk15 on an older machine, and at first attempted it on a 4.11 install. The failures there encouraged me to finally upgrade the machine t

Re: jdk15 on 6.0

On Apr 2, 2006, at 11:41 AM, Andrew Pantyukhin wrote: On 4/2/06, james g. <[EMAIL PROTECTED]> wrote: FreeBSD Land: I've seen this question asked on this very list, and once or twice on the web, but have yet to find a solution. I'm attempting to compile jdk15 on an older

Re: jdk15 on 6.0

Thanks everyone for the tips. I'm going to give the package route a shot, as the additional swap space just isn't cutting it. Cheers, James On Apr 3, 2006, at 8:14 AM, Jon Brisbin wrote: Anish Mistry wrote: You could always just to do a "make package" on another machine with 6.0 and then

Re: jdk15 on 6.0

After several failed attempts at the package route, this was certainly a welcome surprise: http://www.freebsdfoundation.org/downloads/java.shtml Thanks to everyone for their help and suggestions! -james On Apr 3, 2006, at 12:55 PM, james g. wrote: Thanks everyone for the tips. I'm goi

Upgrading/Updating precompiled packages

Hi, I have a small system running FreeBSD. I'd like to know if there's an easy way to upgrade/update precompiled ports packages without using ports tree and portupgrade. Thanks Alex G ___ [EMAIL PROTECTED] mailing list http://lists.f

Torrent Distro

SD is still my choice for easy of use and stability. Just a suggestion. Lorne G TechG Solutions Ph. 780.991.5232 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to &q

Wireless PCI card setup

rd is not detected at startup?)... What am I missing? Any suggestions? Relevant documentation you can direct me to? Direct solutions? :) --G. Held -- End of line. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ques

RE: Wireless PCI card setup

Can you just paste dmesg -a? Righty-O: --G. Held -- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RC2 #0: Mon Dec 22 07

Re: Wireless PCI card setup

Did you set the gateway defaultrouter="192.168.39.1" in /etc/rc.conf so that the computer could find 192.168.38.1? Yes, that was set. Thanks, though. Andrew Gould --G. Held -- End of line. ___ [EMAIL PROTECTED] mailing list http://lists.f

Re: Wireless PCI card setup

nd it all works well. Lucky. ;p --- Is your wireless router setup to be DHCP on the cat5 end? It is. Chris Thanks for your thoughts. --G. Held -- End of line. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ques

RE: Wireless PCI card setup

anks to you and everyone else on the list. Regards Subhro --G. Held -- End of line. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Patching sshd in FreeBSD 4.7

ftp'd the appropriate file for 4.7release [FreeBSD 4.7] # fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/patches/SA-03:15/openssh47.patch and when I try to patch I get this: Hmm... Looks like a new-style context diff to me... The text leading up to this was: -- |Index: cry

Networking Questions

er systems pretty much open to the internet and then start locking them down as need be once I get them seeing the outside world and the outside world seeing them. Regards, Rob G [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.o

Re: Networking Questions

Thanks Bob, This worked out perfectly. All I did was add the second nic. COnfigured it for the First IP in my block and added the Enable Gateway and boom I was off and surfing :) Rob G [EMAIL PROTECTED] - Original Message - From: "Bob Johnson" <[EMAIL PROTECTED]> To: &

Re: default acl's permissions problem [continuation?]

Jun 17 23:48 cvsroot/te # umask 0007 <- this turns out to be the solution. # touch cvsroot/tes # ls -la cvsroot/tes -rw-rw 1 root cvs 0 Jun 18 02:00 cvsroot/tes Now for the acls part. # setfacl -d -m u::rwx,m::rwx,g::rwx,o::--- cvsroot/ # getfacl -d cvsroot/ #file:cvsroot/ #owner:

Possible Attack?

Hi all, I was going through a few servers tonight and came across this in /var/log/messages. This particular server functions mainly as our primary webserver. Its running FreeBSD 4.8-RELEASE. I decided to take a closer look to see what was generating these entries by loading up trafshow.

Re: Config freebsd as getway

e routable IP's and I am having problems with attacks on my network right now. I am not sure you can do what you want to without a hub between a pc and b pc as if my logic serves me correct both network cards would have to be set as a gateway. Hopefully this gets you pointed in the right di

implications of adding root to a group

Hello, I've been looking at the /etc/group and have noticed that some groups have root included in them, for example "operator". Is it not implied that root has access to all things and groups? What is the purpose of adding root to a group? If I add root to some new arbitrary group, what does it re

Apache13/suexec

How does one compile apache, with suexec support, from ports? I need it on one of my client machines, but can't seem to find anything specific on the proper arguments to give during the: make install clean command. I'd rather not have to install it by hand, defeating the beauty of ports! Cheer

Recommended IDE-to-USB bridge chipsets and hard drive enclosures?

been searching for information on a reliable supported chipset with decent performance in an enclosure that does not overheat easily, but sadly haven't found the answers I need, therefore any recommendation from personal experience will be welcome. Thank you.

Re: Recommended IDE-to-USB bridge chipsets and hard drive enclosures?

> > i have 2 of them (not cases but converters+power supply). Could you post 'usbdevs -v' and /var/log/messages info for these converters? Thank you. G. Mirov ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman

FreeBSD 6.2 Installation Problems

ly I can't get all of the components installed to make X or KDE work correctly. Please help! Thank You, G. Yager ___ freebsd-questions

Users unable to write to mounted FAT32 partition

rw 0 0 I've tried adding the -u or -g option with no luck. I understand that since FAT has no inherent permissions chmod has no effect either (tried it just to be sure) so it must be set from fstab. Any help? Thanks! M.G. ___ fr

Re: Users unable to write to mounted FAT32 partition

Jerry, Owner of /mydos is root and Group is wheel. User has rwx while Group and Other only have r-x M.G. Jerry McAllister wrote: On Fri, Mar 02, 2007 at 05:14:14PM -0600, Michael G. wrote: OK, I've scoured the archives for an answer with no results. I'm sharing a FAT32

Re: Users unable to write to mounted FAT32 partition

Chris, A mod of your suggestion did the trick. I was unable to finally "chown Michael /mydos" and then change permissions using chmod. Seems pretty simple but kinda strange that as root I could not change the permissions. Thanks to you and Jerry for all the help! Michael

Laptop speaker vs earphone

Hi all, I have a weird question. In my previous many laptops, whenever I plug in the earphone, the laptop speaker would stop (and I would only hear music through the earphone) With my newest laptop (Acer Aspire 5050), the laptop speaker stays on no-matter-what. I would hear the same music in bot

Re: Laptop speaker vs earphone

Bob McIsaac wrote: A headphone plugged into a speaker line would blast your ears because of the extreme difference in sensitivity unless the jack switches in a series resistor to reduce the level. If you notice poor low-freq response in your phones, that implies it is a line jack intended for an

Re: Laptop speaker vs earphone

Olivier Nicole wrote: According to a quick google at SPDIF, it is a digital signal plug, so noting where you can connect earphone... I know... but earphone sounded great when plugging into it. (And it does have a earphone graphical symbol right on it) Also, I don't have the user manual with me

RESOLVED (RE: Laptop speaker vs earphone)

Thanks everyone, and especially a big thank to awesome Ariff Abdullah who solved it and confirmed it was software-based on this laptop! Lion Tanker wrote: In my previous many laptops, whenever I plug in the earphone, the laptop speaker would stop (and I would only hear music through the earphon

Who wants e little nice pc to fix the wlan-driver and the sound-driver?

Dear Sirs, I have found a little nice pc that I want to use FreeBSD on. It is just 99$ and works nice but... http://www.ewayco.com/ The Wlan is a "VIA Networking VNT6655AM" and as sound there is a "Realtek RTL ALC202". I can't get those chips working. I anyone would like to fix drivers I can d

How to find out which ports/dependencies were installed when installing a port?

ot;B" and "C" along with "A". Later down the road I deinstall "A" and decide I'd like to get rid of the ports/dependencies that "A" needed installed with it. How would I go about finding "B" and "C&qu

Is FreeBSD displaying my RAM correctly?

only recognizing about 512MB of RAM, or am I interpreting it wrong? -- Robert G. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Is this the correct way to update my packages/ports with portupgrade?

Just asking here incase I'm omitting something or doing too much. These are the commands I usually run after grabbing the latest ports: # cvsup -g -L 2 ports-supfile # cd /usr/ports/ && make fetchindex # portsdb -u # pkgdb -F That seems to work fine with no problems, but is it th

How do I change which server to download ports from?

hich takes some time (I have 6.5Mbps). Is there an option to change this to a server of my choice? Thanks. -- Robert G. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send a

`du -h` not printing out the filesystems?

chkn# du -h 12K. chkn# Anyone know what that is? This is a brand new FreeBSD 5.4 install. Thanks -- Robert G. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any

Timezone isn't setting to EST corectly, ntp doesn't help

I'm connected to a remote machine located in NJ and ran /usr/sbin/sysinstall and set the timezone to "Eastern Time", but the clock is displaying 2:30PM or so when it is only 10:44AM here. I tried ntp but that didn't work as well. Does anyone have any idea what's wron

SSH times out - "Server unexpectedly closed network connection"

n". SSH was working fine this morning around 11am. I just got back and now it's hanging. The only changes to the /etc/ssh/sshd_config that I made were to add my one user account. I rebooted and it worked fine this morning, so I don't know what the problem is now as I haven'

Re: Setting up Xorg in a jail

l to "[EMAIL PROTECTED]" I'm not sure if we are on the same page but I have a couple of jails that I installed xorg and tightvnc. I then use the default twm (tabbed window manager) to bring up the applications I want to use by vnc&#

Re: Fetch

.1 sometime after the next version is released like 5.3 I think you have to use ports. I think I ran into that with a 5.2.1 box I had. G. > > Does it work if you first ping the server holding the port files > and then try again? > > I once had a similar problem which turned out t

php4-xml port

Greetings, I'm having a bit of trouble getting the php4-xml port upgraded/ installed. Using the php4-extensions meta port, with xml support turned on, once it makes it to the php4-xml port install, it fails when looking for an expat item: -- cc -shared xml.lo -Wl,--rpath -Wl,/usr/local/

Re: php4-xml port

Thanks for all the quick responses! The symlink got the port to install for now, until the patch lands. I had done a quick search of the ports list before posting, but should have been searching for expat information rather than the php4-xml port. Thanks again! -J _

Re: MP3/MP4

Dear Customer, We are pleased to get to know that you are presently on the market for MP4 other digital products, and as the *largest specialized OEM manufacturer of MP4/GPS/DPF and other digital products *and exporter for these products in China, we sincerely hope to establish business relation

keyboard probs

Hello, i recently downloaded and installed freebsd and the only problem i get is with the keyboard. it works fine when i am typing my username, but it will not allow me to enter anything for a password, even the root password, nothing apears on screen just a while cursor block. i am running a

Opteron problem after recompile is "ffs_mountroot: can't find rootvp"

Generic amd64 kernel boots fine after recompile of 5.2.1 amd64 version on Opteron 146 single proc machine (2GHz) It doesn't mount the root file system the error is: ffs_mountroot: can't find rootvp The Geom list is blank any suggestions? PLS also email your responses to PG_AT_ETH1.com _

Re: Opteron problem after recompile is "ffs_mountroot: can't find rootvp"

ist i should be posting to specifically for the amd64? thx --- Kris Kennaway <[EMAIL PROTECTED]> wrote: > On Tue, Oct 26, 2004 at 07:51:07AM -0700, Peter G > wrote: > > . any suggestions? > > You removed too much from your kernel confi

pcm200 drivers

Hi from Greece. I m starting with freebsd and I m just trying to have it installed on my laptop. The problem is with the pcm200 cardbus card. It is not recognised by freebsd 5.3. Though I have many years of experience with solaris, I m just getting my feet wet with freebsd. Is there any driver out

Help with rc.conf error, read-only file system

I've been away from FreeBSD for a while and I just loaded 5.3 and inavertently made an error in rc.conf. Now when I boot up the file system is read-only and I haven't been able to edit rc.conf to correct the simple mistake. Any help would be appreciated.

How to determine /dev/ad* from mount label

Hi, I've tried the mount, tunefs and df manuals, and don't know where to look next. I am trying to find out what device, in terms of /dev/ad0s1a and so on, is actually 'connected' to a label mounted file system. Here is my fstab (from PC-BSD, by the way): # more /etc/fstab # Device Mo

Re: How to determine /dev/ad* from mount label

On 04/27/2010 00:04, Carl Johnson wrote: "Mark G." writes: [...] I just wanted to know if there was a utility to tell me which actual device was mounted. I also tried camcontrol devlist and atacontrol list. The latter allowed me to determine that /dev/label/rootfs0 is ad2s1a ba

Fatal Trap 10: trace trap while in vm86 mode, trying to boot install CD after menu

trying to install 6.1 on a bunch of blade servers, P4 3.06Ghz w/ 2GB RAM SEARCHED THRU ALL THE ARCHIVES AND MAIL LISTS for ANY similar happenings and there are NO valuable clues.. Tried installing Fbsd 6.1, 6.0 and even a hard drive that had 5.4 pre-installed same result always AFTER the boot me

Re: Fatal Trap 10: trace trap while in vm86 mode, trying to boot install CD after menu

lade servers and they ALL act identically as reproducing thsi error. Thanx for your reply, any input is appreciated. -Peter --- Lowell Gilbert wrote: > Peter G writes: > > > trying to install 6.1 on a bunch of blade servers, > P4 > > 3.06Ghz w/ 2GB RAM > > >

Re: Fatal Trap 10: trace trap while in vm86 mode, trying to boot install CD after menu

For completeness sakes of the archives my solution was: to put the following in the /boot/loader.conf it's the only way these machines will boot with FreeBSD given their Serverworks chipsets. hw.hasbrokenint12=1 hw.ata.ata_dma=0 If the previous is ommited after install (after the CDROM is remov

Traffic shaping with ipfw/DUMMYNET when using natd

I've been setting up ipfw and DUMMYNET to do some traffic shaping on my network. Right now to test things out I've basicly put everything into two categories. There's traffic from 10.0.10.10 which is lower priority (this is a download machine) and then there's everything else. The biggest probl

Re: IPFilter section in Handbook needs updating

And incomplete yes i agree that the doc does need to be updated and examples (more) need to be added. --- On Fri, 12/5/08, Dean Weimer <[EMAIL PROTECTED]> wrote: From: Dean Weimer <[EMAIL PROTECTED]> Subject: IPFilter section in Handbook needs updating To: freebsd-questions@freebsd.org Date: Fri

Re: IPFW Firewall Question

Thank you for your help on this Garrett --- On Fri, 12/5/08, Mel <[EMAIL PROTECTED]> wrote: From: Mel <[EMAIL PROTECTED]> Subject: Re: IPFW Firewall Question To: freebsd-questions@freebsd.org, [EMAIL PROTECTED] Date: Friday, December 5, 2008, 6:02 AM On Friday 05 December 2008 01:26:0

PAE, mem available to user?

hi all, read thru the archives, esp thru thread: "PAE testing results ..." from circa May 03. I am getting a diffrent problem on a uniProc machine. with 5.2.1 and a stock PAE build. machine is stable and does not crash, but the big mem user job we want to submit to it, all these jobs die when th

Re: PAE, mem available to user?

Thank you for your response What i'd like to be able to do on this 5.2.1 machine is run a user job that may take up 1.5GB of mem, i'd like it to start swapping which it doesn't do, nor does it panic, nor does it lock up. It stays responsive. Taking what U said i recompiled the kernel as a non PAE

compiling kernel :(

onfiguration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.54 2003/04/28 03:41:46 simokawa Exp $ machine i386 cpu I686_CPU ident MYKERN maxusers64 makeoptions DEBUG=

Re: Sudden /libexec/ld-elf.so.1: Shared object "libintl.so.8" not found, required by errors

On Fri, Apr 10, 2009 at 7:40 PM, Agus wrote: > Hi guys, > > Yesterday i suddenly start receiving this errors... first i noticed it > cause i couldnt login and bash threw it.. then su... > > /libexec/ld-elf.so.1: Shared object "libintl.so.8" not found, required by > "-su" > > Then i remove bash an

Re: clear old output in login screen?

Hey John, In order to achieve this, there are two methods that I know of, however, they are only tested in the Bourne and Bourne Again shells. clear && logout # Bourne Again (Bash) Shell clear && exit # Bourne (sh) Shell You may have to try similar comman

Re: Command-line IRC client

Irssi or Weechat will be most recommended. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"

CPUTYPE for VIA EPIA EDEN in /etc/make.conf on FreeBSD 6.1

Hi, I'm trying to get a little more speed out of my 600MHz mini-itx box as I convert it into a FReeBSD fileserver (with GUI) . . . I'm trying to find the right settings for /etc/make.conf and would appreciate your help. dmesg.boot shows the processor as being: CPU: VIA C3 Samuel 2 (601.37-MHz 6

ntpd configuration . . . and errors

Hi all, Following the suggestions regarding setting timekeeping up as a daemon I did the following and got these console messages . . . . . . Jul 14 13:04:29 epia ntpd[648]: no IPv6 interfaces found Jul 14 13:04:29 epia ntpd[648]: gethostby*.getanswer: asked for "europe.pool.ntp.org IN ", got

Re: ntpd configuration . . . and errors

--- Bob Johnson <[EMAIL PROTECTED]> wrote: > On 7/14/06, Owen G <[EMAIL PROTECTED]> wrote: > > > > Following the suggestions regarding setting ntpd as a daemon > > I did the following and got these console messages . . . > > > > . . . > > Jul 1

defining dependencies for ports

> > Message: 5 > Date: Sun, 16 Jul 2006 23:00:40 -0500 > From: mike <[EMAIL PROTECTED]> > Subject: defining dependencies for ports > To: freebsd-questions@freebsd.org > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hello. I'm brand new to FreeB

Re: Fwd: Re: Long msg: Unable to enable audio in FreeBSD 6.2 - Chipset VT8233A

On Tue, Oct 02, 2007 at 12:36:37PM +0200, Erik Trulsson wrote: > On Tue, Oct 02, 2007 at 11:22:49AM +0100, Sai Vinob wrote: > > Dominique had asked me to try few stuff. > > > > First he had asked me to give the output of pciconf. Which we found > > didnot have any entry for my sound card. As a ref

BSDstats Statistics for Sept, 2007 ... 12 769 Hosts Reported In

r those that are participating ... once more, thank you ... and spread the word, we need more ... - Marc G. Fournier Hub.Org Networking Services (http://www.hub.org) Email . [EMAIL PROTECTED] MSN . [EMAIL PROTECTED] Yahoo . yscrappy Skype:

Re: Netcraft do not display uptime graph, why?

> freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" - Marc G. Fournier Hub.Org Networking Services (http://www.hub.org) Email . [

Re: Intel 82801H High Definition Audio Controller on FreeBSD7.0 Current

On Fri, Oct 12, 2007 at 02:39:59PM +0800, Tsetsbold wrote: > I typed this: > > #kldload snd_hda > #cat /dev/sndstat/ > at memory 0xfebfc000 irq > 21 kld snd_hda [20070710_0047] [MPSAFE] (1p:1v/1r:1v channels duplex > default) > # > > Now I have add "device sound" in "Kernel Configuration". >

Formatting man pages -> txt file

Hello, I'd like to get a man page in .txt format. What I tried was "man man > man.txt", but this gives me the man pages with many control char. How can I get a man page to be formatted to a regular .txt file? Thanks, Alain ___ freebsd-questions@fre

Re: Hi bsd team! Plz help me!

On Fri, Oct 19, 2007 at 04:23:13PM +0900, Byung-Hee HWANG wrote: > On Fri, 2007-10-19 at 11:39 +0500, Eldar Velibekov wrote: > > Hi BSD team. Thanx for a Great OS! But! i wont use also graphical mode(X - > > system) but i dont wont 1024-768 resolution, i wont 1280 - 800 on my > > laptop(HP 510, CHi

Re: defend from -> :() { :&:; } ;:

Danielisz Laszlo wrote: Please do not try to execute this: :() { :&:; } ;: on your BSD machine. I ask all who already tried it how to defend from this? __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail

Re: Congratulations

Federico Lorenzi wrote: On Nov 7, 2007 4:20 PM, Chris <[EMAIL PROTECTED]> wrote: On Wed, 7 Nov 2007 16:11:52 + (UTC) James Brown <[EMAIL PROTECTED]> wrote: Message-Id: <[EMAIL PROTECTED]> Date: Tue, 6 Nov 2007 22:15:50 +0100 (CET) UK NATIONAL e-LOTTERY, ONLINE NOTIFICATION UNIT, HOME

Re: OT: Beastie 3D-rendered

shows ... cute :) - Marc G. Fournier Hub.Org Networking Services (http://www.hub.org) Email . [EMAIL PROTECTED] MSN . [EMAIL PROTECTED] Yahoo . yscrappy Skype: hub.orgICQ . 7615664 -BEGIN PGP SIGNATURE- Version: GnuPG

  1   2   3   4   5   6   7   8   9   10   >