Is there a way to pass variables to a shell script from the command line with
the at command?
What I've been trying is something like : at -f '/path/script 20 test' 8:10
091808 : Where 20 and test set variables in the script.
I've tried googling the at command for help but there's a lot of "at"
Is this an open relay using ipv6? If so how to block the ipv6 relay.
I thought after sendmail v8.9, all relay action was blocked by default.
maillog entry
Nov 10 15:01:11 "hostname" sm-mta[8989]: mAAL021C008989: from=<[EMAIL
PROTECTED]>, size=4825, class=0, nrcpts=0, bodytype=7BIT, proto=ESMTP,
I am having trouble getting a Netgear WG311t card to work, I had tried 7.1beta
but kept getting irq interrupt storm no matter what slot or irq was set to the
slot/card. Installed 6.3, stuck beacon error. I have tried a, b, and g mode. I
have tested the card with other "os's" to see if was hardw
Looking to build a new server, looking for a dual amd 940 board with sata II
support.
I have googled, but still looking for a firm success before spending the
money.
Anyone have success with this Tyan board.
Model S2892GNR
North Bridge AMD 8131, South Bridge Nvidia nForce Prof. 2200
Having trouble getting my first connection setup.
I am must use the 3des md5 encryption.
This is from the error log.
: DEBUG: hash validated.
: DEBUG: begin.
: DEBUG: seen nptype=8(hash)
: DEBUG: seen nptype=11(notify)
: DEBUG: succeed.
: ERROR: unknown notify message, no phase2 handle fo
- Original Message
From: Zbigniew Baniewski <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Tuesday, May 13, 2008 7:39:30 AM
Subject: Re: FreeBSD7/xorg/radeon: Section "Screen" totally ignored
On Mon, May 12, 2008 at 08:36:03PM -0400, Gary Palmer wrote:
> What version of xorg are you usi
One of my boxes took a trip of sorts.
From auth.log,
Dec 17 07:57:32 redtick sshd[56969]:
Dec 17 11:47:43 redtick sshd[57596]:
Dec 18 15:45:20 redtick sshd[61804]:
Dec 18 17:00:00 redtick sshd[62099]:
Dec 18 21:18:52 redtick sshd[62776]:
Dec 18 21:19:18 redtick sshd[62779]:
I have several freebsd boxes on 2 different connections, each one is sitting at
or about this date.
uname -a 6.0-STABLE FreeBSD 6.0-STABLE #2: Mon Jan 9 15:05:38 CST 2006
While trying to add ports or pkgs I get connection refused errors. Also when
using
/stand/sysinstall I get, can'
I have a tyan k8wd with dual bge nics but they are painfully slow on transfer
rates.
Is there something I need to put in the hints file to fix this??
Thanks!
dmesg output
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1
On Monday 28 March 2005 20:25, Edwin Mons wrote:
> On Mon, 28 Mar 2005 20:20:50 +0200, Edwin Mons wrote:
> > I'm trying to enable DRI on my IBM ThinkPad A20m, which has an ATI
> > Rage Mobility P/M AGP 2x rev 100 GPU onboard. I succesfully
> > installed the mach64 DRM module, which shows the follo
On 2005-01-25 Kris Kennaway wrote:
>> I'm trying to mount from a freeSBIE system (freeBSD 5.3) to my freeBSD
>> server (5.1) when I get the errormessage: RPCPROG_MNT: RPC:
+Authentication error; why = Client credential too weak.
>>
>> What can I do?
>
>Try to mount as root, not a nonprivileged us
I've been searching for a web-based calendar, scheduler and message board for a
small network of 15 employees. I saw one about a year ago that used
bsd-apache-php and any browser could access it, but I've been unable to find it
now. Any suggestions to fill the need?
I've run onto a problem with a netgear wg311t and a msi k8 neo with a via chip.
I've placed the card into all the pci slots removed all other pci cards and
still it refuses
to work for 6.1 bsd or m$. I've placed the card into an older pc and it works
for 6.1 bsd with no problems.
pciconf -
I've got a encore enlwi-g pci wireless network card
that has a marvel chipset that is not supported by the
current drivers. The ndis driver will run the card
just fine. But if I try to load the ndis driver from
loader.conf the card errors out and cannot be
recovered until you reboot the computer. U
I'm running apache-1.3.37_4, php4-4.4.7, and eGroupWare-1.2.106_1.
Apache error file is returning the following error when trying to access the
calendar.
PHP Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to
allocate 23040 bytes) I've searched but have not found a worki
I am running Freebsd 6.2-p6 with eGroupWare-1.2.106_1, dovecot-1.0.r2 and
mpd-3.18_5.
When I connect from home via vpn to the server then try to check mail thru
egroupware I get imap authentication errors. Anyone at work checking their mail
will also get the same error, kill the vpn c
I have a firewall for my pppoe dsl connection that is giving me fits. After a
few hours of surfing it runs out of buffer space. I have run memtest on the
memory, checked fine. Changed out memory, still locking up.
top while out of buffer on ping
last pid: 3697; load averages: 0.00, 0.03,
Has anyone been able to run vista or worldvista on freebsd?? www.worldvista.org
I have 4 freebsd servers and hate to add a linux to the mix just for this.
Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/l
I have a headless box that went dead to outside connections and the keyboard
was dead. I had to pull the plug to reboot. When it came online,
/var/log/message was full of this
Dec 17 12:55:29 redtick kernel: ath0: discard frame w/o packet header
Dec 17 12:55:30 redtick kernel: dc0: discard
I've been trying to install freebsd on a HP pavilion with a A7V-VM Asus
motherboard.
The bios finds the harddrive and controler, but freebsd does not. I've
installed a harddrive with
bsd already loaded and the computer runs fine. I've tried older install cd's
of freebsd from 4.1 to 6.2rc2 s
buildworld fails with this msg
c++ -fpic -DPIC -O2 -fno-strict-aliasing -pipe -DIN_GLIBCPP_V3
-DHAVE_CONFIG_H -I/usr/src/gnu/lib/libstdc++
-I/usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++
-I/usr/src/gnu/lib/libstdc++/../../../contrib/gcc
-I/usr/src/gnu/lib/libstdc++/../../../
I'm having problems with xorg on an IBM t22 using 6.2 freebsd. The video card
shows to be an S3 savage, but the savage driver is broken (blank screen on
startx) so I am using the vesa driver. It works fine untill I drop out of X,
the screen goes blank, keyboard and mouse become unresponsive.
I
I notice that the new version of egroupware 1.4.001 requires
eGroupWare-egw-pear.
Does anyone have a successful install?? I tried an upgrade 1.2.106 but
something about php5 was broken, and dropped back to php4. I forget what part
of php5 would not build, it was several months ago.
__
--- On Thu, 6/4/09, Wojciech Puchar wrote:
> From: Wojciech Puchar
> Subject: Re: ISP questions
> To: "Bill Moran"
> Cc: freebsd-questions@freebsd.org
> Date: Thursday, June 4, 2009, 12:56 PM
> >> 4. What kind of hardware and
> software are you running?
> >> "Can't provide this, due
> to
--- On Sun, 6/7/09, Dave wrote:
> From: Dave
> Subject: Samba3 domain controller howto?
> To: freebsd-questions@freebsd.org
> Date: Sunday, June 7, 2009, 6:28 AM
> Hello,
> I've found a lot of this for LInux, but
> am looking for something
> FreeBSD specific. I'm wanting to set up a FreeB
--- On Tue, 6/23/09, ericr wrote:
> From: ericr
> Subject: Re: Can't boot 7.2-RELEASE i386 or AMD64 on an Abit KV8 Pro
> motherboard with Sempron 3100+ CPU
> To: "Kent Stewart" , freebsd-questions@freebsd.org
> Date: Tuesday, June 23, 2009, 12:44 PM
> On Sat, Jun 20, 2009 at 3:10 PM, Kent
>
Checking /var/log/messages after loading snd_emu10k1, I see the following.
muz kernel: pcm1: port 0xd800-0xd81f irq 4 at device 9.0
on pci0
muz kernel: Interrupt storm detected on "irq4: atapci0"; throttling interrupt
source
muz kernel: pcm1:
muz kernel: emujoy0: detached
Upon.
muz# v
While upgrading from 6.1 pr1 to 6.1 release, I got this msg 3 days ago, waited,
csvup again this morning but still the same error on buildworld.
Thanks for the flames!
===> gnu/usr.bin/cc/cc (all)
cc -O2 -fno-strict-aliasing -pipe -DIN_GCC -DHAVE_CONFIG_H -DPREFIX=\"/usr\"
-I/usr/o
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:owner-freebsd-
> [EMAIL PROTECTED] On Behalf Of Mark Busby
> Sent: Wednesday, May 17, 2006 2:46 PM
> To: help help
> Subject: buildworld errors
>
> While upgrading from 6.1 pr1 to 6.1 release, I got this
I getting errors from cron on this job.
owner of /usr/libexec/sav-entropy is root:wheel
email notice:
Subject: Cron <[EMAIL PROTECTED]> /usr/libexec/save-entropy
X-Cron-Env:
X-Cron-Env:
X-Cron-Env:
X-Cron-Env:
X-Cron-Env:
add: not found
crontab entry:
# Save some entropy s
Mark Busby <[EMAIL PROTECTED]> writes:
> I getting errors from cron on this job.
> owner of /usr/libexec/sav-entropy is root:wheel
>
> email notice:
> Subject: Cron <[EMAIL PROTECTED]> /usr/libexec/save-entropy
> X-Cron-Env:
> X-Cron-Env:
> X-Cr
I've had a few panics. Attached are the output from vmsat -m then -z.
uname -a
FreeBSD mars.sbcglobal.net 7.0-RELEASE-p5 FreeBSD 7.0-RELEASE-p5 #0: Mon Nov 24
23:03:01 CST 2008 box...@mars.sbcglobal.net:/usr/src/sys/i386/compile/MARS
i386
Jan 1 08:56:39 mars savecore: reboot after panic:
Update of kernel panic.
Rebuilt kernel without 80211node, seems to have cured the panics.
Removed all wireless support for now.
Thanks to Toni Schmidbauer
--- On Thu, 1/1/09, Mark Busby wrote:
> From: Mark Busby
> Subject: kernel panic
> To: "help help"
> Date: Thursd
I've had good luck using tha cpan script to add perl moduals
"cpan XML::Parser" will add it and the needed moduals
check man cpan
--- On Mon, 3/30/09, af300...@gmail.com wrote:
> From: af300...@gmail.com
> Subject: Re: Re: Where is the Perl XML::Parser port
> To: "Paul B. Mahol" , af300...@gm
uname -a FreeBSD muz.sbcglobal.net 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Thu Jan
1 14:37:25 UTC 2009 r...@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
i386
portsnap is up to date.
Building myth-0.21 throws this error,
creating usr/local
creating usr/local/lib
creating usr/local/lib/
--- On Tue, 3/31/09, Vasadi I. Claudiu Florin wrote:
> From: Vasadi I. Claudiu Florin
> Subject: Re: Mythtv-0.21 build error
> To: redt...@sbcglobal.net
> Date: Tuesday, March 31, 2009, 4:18 PM
> On Wed, 01 Apr 2009 00:16:26 +0300, Mark Busby
> wrote:
>
> >
After doing make clean, and restarting the build of mythtv-0.21 port.
This is the error on make install
l-dtor -D__STDC_CONSTANT_MACROS -DPIC -fPIC -DMMX -Di386 -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -DPREFIX=\"/usr/local\" -DLIBDIR=\"/usr/local/lib\"
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET
--- On Tue, 3/31/09, Mark Busby wrote:
> From: Mark Busby
> Subject: Re: Mythtv-0.21 build error
> To: "help help"
> Date: Tuesday, March 31, 2009, 5:42 PM
> After doing make clean, and restarting the build of
> mythtv-0.21 port.
>
> This is the
--- On Thu, 5/28/09, Bill Moran wrote:
> From: Bill Moran
> Subject: Re: What is this forum for?
> To: "Wojciech Puchar"
> Cc: freebsd-questions@freebsd.org
> Date: Thursday, May 28, 2009, 4:12 PM
> In response to Wojciech Puchar :
> > >
> > > This list has been around of a LNG
> time.
"B. Cook" <[EMAIL PROTECTED]> wrote:Hello All,
Seems OT, but I have been asked to give someone remote access to an AS/
400 we have here.
As I am not knowledgeable about AS/400's I do not know if there is an
openssh/sshd app that could be put on there. They give everyone
access 'locally'
Looking at a Trendnet KVM TK-407K switch. It shows to work with linux. Has
anyone had success using it with FreeBSD? I hate to waste time and money, even
with the option of resale on eslay. Thanks for your time.
___
freebsd-questions@freebsd.org maili
New to gmirror so a newb question. I have my computer setup with 4 sata drives.
I am using one for the operating system then one to mirror it. One has data
and I want a mirror of that. When creating the first mirror I used gm0. Now
creating the 2nd mirror use gm1? Or is there a gotcha hidden a
Looking for suggestions on a web based msg system for an office. People are in
and out quite a bit, they need to be able to log in from the road. Prefer
email, notes, and maybe bulletin board to notify just a group or everyone in
case of a disaster.
Ability to link into cell phone text msg sy
43 matches
Mail list logo
