Hi,
Installing LyX 1.5.1 from ports gives the following error during
compiling (on 6.2-Stable):
...
filetools.cpp:416: error: `fs::filesystem_error' has not been declared
filetools.cpp:416: error: invalid catch parameter
filetools.cpp:416: error: expected `)' before "const"
filetools.cpp:416: e
Hello,
I own a HP LaserJet 2100, connected to my home network. According to the
specifications it should be able to print 10 pages per minute. When using
Windows that's not a problem. But using FreeBSD (with lpd configured with
help of Apsfilter from the ports) it prints very slowly, I guess abou
On stardate Tue, 9 Dec 2003, the wise Peter Ulrich Kruppa entered:
> On Tue, 9 Dec 2003, Marco Beishuizen wrote:
>
> >
> > Hello,
> >
> > I own a HP LaserJet 2100, connected to my home network. According to the
> > specifications it should be able to p
On stardate Wed, 10 Dec 2003, the wise Mark Terribile entered:
> When something is slow, the first thing to learn is _why_ it is slow.
> With it running, call up systat 1 -vmstat (systat-one-dash-vmstat) and
> look at the bar graph from the lhs to the center of the display. If you
> see lots of
On stardate Tue, 9 Dec 2003, the wise Warren Block entered:
> You could get the PostScript DIMM for the 2100 and eliminate apsfilter.
> The speed increase would depend on what type of things you're printing,
> but it's inexpensive (saw the DIMM on printerworks.com for $39).
>
> -Warren Block * Rap
On stardate Wed, 10 Dec 2003, the wise Mark Terribile entered:
> I'm wondering if the problem is that everything going through APSFILTER is
> sent as Postscript or raster. If this is on a 4.x (did you say 4.9?) then
> you are limited to the 1.1 Meg/sec of USB1 (I'm assuming that it's a USB
> prin
On stardate Wed, 10 Dec 2003, the wise Chris Howells entered:
> I have a similiar "issue" with a HP LaserJet 4 Plus, which is capable of
> 12ppm. It's connected to my network using a JetDirect card on 100mbit switch,
> so speed of the interface shouldn't be an issue. I'm using the hpijs drivers
>
On Fri, 12 Sep 2008 18:02:37 -0400
Greg Larkin <[EMAIL PROTECTED]> wrote:
> Hi Marco,
>
> Right you are! In fact, after my initial logcheck commit, someone
> opened a PR stating something very similar to what you noted:
> http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/127255
>
> The submitter
On Sun, 14 Sep 2008 13:00:47 -0400
Greg Larkin <[EMAIL PROTECTED]> wrote:
> Finally, I'll add the members of the wheel group to the logcheck group
> so anyone in that group can still read the file as they could before:
>
>
On Sun, 14 Sep 2008 13:00:47 -0400
Greg Larkin <[EMAIL PROTECTED]> wrote:
> Now the logcheck, root, and glarkin user can all
> read /var/log/auth.log, and the logcheck script should work fine. I
> hope that clears everything up. If you have any further questions or
> problems, please post back h
Hi,
In an attempt to upgrade db42 to db47 I seem to have broken some
things. If I try to portupgrade anything I get:
...
#portupgrade -a
** Makefile possibly broken: www/gnome-user-share:
/libexec/ld-elf.so.1: Shared object "libdb-4.2.so.2" not found,
required by "libaprutil-1.so.3" [: -l
On Tue, 14 Oct 2008 08:06:46 -0700 (PDT)
mdh <[EMAIL PROTECTED]> wrote:
> Have you tried installing db42 from ports manually? ie:
> (cd /usr/ports/databases/db42 && make deinstall && make clean && make
> install && make clean)
>
> If that doesn't work, perhaps try installing the db42 pkg from th
On Tue, 14 Oct 2008 09:35:55 -0700
Jeremy Chadwick <[EMAIL PROTECTED]> wrote:
> The "Range Not Satisfiable" errors are because your db-4.2.52.tar.gz
> is of an incorrect size (probably larger than what's on the source
> site). The last error (talking about modification time) could
> indicate that
Hi,
I upgraded the radeonhd driver from 1.2.5 to 1.3.0. It seems to work fine,
except when moving a window. As far as I can see all other actions like
scrolling or resizing is quick, but moving windows goes really slow.
In my xorg.conf the modules "extmod", "record", "dbe", "glx", "dbi" and
On Mon, 7 Dec 2009, George Liaskos wrote:
Give x11-drivers/xf86-video-ati a try
http://lists.freebsd.org/pipermail/freebsd-x11/2009-December/009093.html
What are the differences between the ati and the radeonhd driver? Is the
ati-driver for all Ati cards and the radeonhd specifically for Rad
On Mon, 7 Dec 2009, Marco Beishuizen wrote:
Hi,
I upgraded the radeonhd driver from 1.2.5 to 1.3.0. It seems to work fine,
except when moving a window. As far as I can see all other actions like
scrolling or resizing is quick, but moving windows goes really slow.
In my xorg.conf the
Hi,
Since I upgraded to 7.0, it seams that my /etc/rc.conf isn't read
anymore at startup. At least partly. Things that do not start anymore
are:
- oss
- dbus
- hald
- avahi
They are all gnome related. I have in my rc.conf: oss_enable="YES",
hald_enable="YES", avahi_daemon_enable="YES and dbus_ena
On Sat, 19 Apr 2008 11:24:34 +0200
Mel <[EMAIL PROTECTED]> wrote:
> Anything useful come up when you put rc_debug="YES" in there?
> Gutshot guess, the polkitd_enable is missing.
I've attached the messages at startup with rc_debug="YES" in my
rc.conf. I've also enabled the polkitd, but it says not
On Sat, 19 Apr 2008 02:07:09 +0200
Marco Beishuizen <[EMAIL PROTECTED]> wrote:
> Hi,
>
> Since I upgraded to 7.0, it seams that my /etc/rc.conf isn't read
> anymore at startup. At least partly. Things that do not start anymore
> are:
> - oss
> - dbus
> - hal
On Sat, 19 Apr 2008 07:44:59 -0600
Eric <[EMAIL PROTECTED]> wrote:
> are you changing the kernel security level in your rc.conf file? if
> so, comment it out and reboot. that was an issue i had on a 6.x box
> recently and commenting out the security level change fixed it
No, I didn't change that.
On Sat, 19 Apr 2008 07:44:59 -0600
Eric <[EMAIL PROTECTED]> wrote:
> are you changing the kernel security level in your rc.conf file? if
> so, comment it out and reboot. that was an issue i had on a 6.x box
> recently and commenting out the security level change fixed it
When I do a "sysctl -a |
On Sat, 19 Apr 2008 17:20:36 +0300
Manolis Kiagias <[EMAIL PROTECTED]> wrote:
> securelevel -1 is fine. This is the default:
> quote from init(8):
>
> -1Permanently insecure mode - always run the system in level 0
> mode. This is the default initial value.
>
> Your problem lies elsewhere. I
On Sat, 19 Apr 2008 17:40:13 +0300
Manolis Kiagias <[EMAIL PROTECTED]> wrote:
> Ah!!! It just clicked! You got a lot of _enable="NO"
> This is rather unusual - you usually override something from
> /etc/defaults/rc.conf with a "YES"
>
> Your /etc/defaults/rc.conf has missing entries. It probably
Hi,
When I try to install OO from the ports I get the message "Environment
error: "JAVA_HOME" should not be defined".
Does anyone know how to get rid of this?
Thanks,
Marco
--
Alas, I am dying beyond my means.
-- Oscar Wilde [as he sipped champagne on his deathbed]
___
On Tue, 29 Apr 2008 20:27:47 -0300
Mario Lobo <[EMAIL PROTECTED]> wrote:
>
> unset JAVA_HOME
> make install
>
Yes, this seems to work. Thanks.
Marco
--
If the weather is extremely bad, church attendance will be down.
If the weather is extremely good, church attendance will be down.
If the bul
Hi,
My hald is crashing constantly. It's started when booting by rc.conf and
then it crashes immediately with no further error messages. It crashes
also when I start it manually. The problem is quite severe because it
even caused two kernel panics.
I'm running 7.0-Stable and the hal version is 0.
On Wed, 14 May 2008 22:36:49 +0200
Marco Beishuizen <[EMAIL PROTECTED]> wrote:
> Hi,
>
> My hald is crashing constantly. It's started when booting by rc.conf
> and then it crashes immediately with no further error messages. It
> crashes also when I start it manually. T
Hi,
I noticed some messages when booting:
...
link_elf: symbol ata_controlcmd undefined
KLD file atapicam.ko - could not finalize loading
...
My /boot/loader.conf includes:
...
atapicam_load="YES"
hw.ata.atapi_dma="1"
...
Entering kldload atapicam gives:
kldload: can't load atapicam: No such fi
On Fri, 13 Apr 2012, the wise Polytropon wrote:
In FreeBSD 9, loading atapicam should not be neccessary,
as it is now part of the GENERIC kernel and has "merged
the ATA and SCSI functionality" for disks and optical
devices. Try removing it from loader.conf and try again.
(Note possible device na
Hi,
I'm trying to set up a vpn connection to the university library by using
pptpclient. In other OS's this takes around 10 seconds, but in FreeBSD
this seems very difficult to do, and I've no idea why. It looks like
there is a connection made, but after a minute or two it just disconnects
an
On Wed, 31 Aug 2011, the wise krad wrote:
have you tried mpd? I always found pptpclient a bit prone to issues
http://www.freebsd.org/doc/handbook/pppoa.html
Yes I did some time ago, but I found it so complicated that I never got it
working. Pptpclient seems a lot simpler so I wanted to try t
On Wed, 31 Aug 2011, the wise Mike Tancsa wrote:
use mpd5 from the ports. It is well supported and works very well both
as a client and server.
There is a sample config in the mpd.conf.example where all you need to
do is change the userid and passwd and server IP...
pptp_client:
#
# PPTP clien
On Thu, 1 Sep 2011, the wise Коньков Евгений wrote:
Notice: [B1] IFACE: Add route 0.0.0.0/0 130.115.3.34 failed: File exists
You already have default route in your system
why you set up the default again?
Notice in conf:
set iface route default
With help from Mike Tancsa I've changed the conf
On Fri, 2 Sep 2011, the wise Коньков Евгений wrote:
set iface route 130.115.0.0/16
you say that behind tunnele thereis 130.115.0.0/16 subnet, but
MB> [B1] 130.115.85.11 -> 130.115.3.35
you have address from subnet 130.115.0.0/16 addres on local machine
so you get this message:
MB> Loop detect
On Sat, 3 Sep 2011, the wise Коньков Евгений wrote:
Please describe your networks fully
also I ask to send output of:
ifconfig
netstat -nr
My computer has IP 192.168.1.11, and sits behind a ADSL router which has
IP 192.168.1.1, the router is the gateway to the internet. IP adresses are
assi
On Mon, 5 Sep 2011, the wise Коньков Евгений wrote:
As I have so, you
1. Successfully connect to university
MB> ng0: flags=88d1 metric 0
MB> mtu 1456
MB> inet 130.115.77.12 --> 130.115.3.34 netmask 0x
MB> inet6 fe80::20e:cff:fe3d:e16d%ng0 prefixlen 64 scopeid 0x8
MB>
On Mon, 5 Sep 2011, the wise Коньков Евгений wrote:
may be you have a problem with firewall.
try
#traceroute
Traceroute gives:
...
traceroute vpn-eur-pptp.eur.nl
traceroute: Warning: vpn-eur-pptp.eur.nl has multiple addresses; using
130.115.3.35
traceroute to vpn-eur-pptp.eur.nl (130.115.3.3
On Mon, 5 Sep 2011, the wise Scott Ballantyne wrote:
Stop in /usr/ports/graphics/gtk-update-icon-cache.
*** Error code 1
Stop in /usr/ports/graphics/gtk-update-icon-cache.
*** Error code 1
Try deinstalling and reinstalling gtk-update-icon-cache first.
Regards,
Marco
--
My father was a God-f
Hi,
Gthumb core dumps with:
...
IRQ's not enabled, falling back to busy waits: 2 0
Segmentation fault (core dumped)
...
Does anyone know what this means?
Thanks in advance,
Marco
--
Fortune's Real-Life Courtroom Quote #41:
Q: Now, Mrs. Johnson, how was your first marriage terminated?
A: By
Hi,
I have an Intel SRCU42X raid controller that currently has firmware
version 414D. The bios flash was done by a "system update package", from
Intel which is an iso file that you can burn to a cd. The upgrade to 414D
went fine.
But the newest firmware version is 414I and is not available a
On Sun, 8 Jan 2012, the wise Polytropon wrote:
If this is depending on the name "[BOOT]", there are
two ways to deal with special characters in file names,
if you need to specify them on the command line:
a) use escape sequences:
-b \[BOOT\]/Bootable_HardDisk.img
b) use quoting:
On Sun, 8 Jan 2012, the wise Polytropon wrote:
Does this image boot successfully?
I don't know yet because I've used all my cd-r's :-(.
Within a few days I'm expecting some new cd-rw's and I'll let you know how
things went.
If you compare your ISO with the original one, file sizes
should b
On Sun, 8 Jan 2012, the wise Polytropon wrote:
Does this image boot successfully?
Unfortunately this is also a no go. I think Intel has done something
special to their iso's, considering that I'm missing 7MB of data.
Regards,
Marco
--
Men have as exaggerated an idea of their
rights as wom
Hi,
I just upgraded from 8-STABLE to 9-STABLE on my dual Xeon (nocona). Now I
have in my boot messages:
...
root: /etc/rc.d/sysctl: WARNING: sysctl machdep.hlt_logical_cpus does not
exist.
root: /etc/rc.d/sysctl: WARNING: sysctl machdep.hyperthreading_allowed
does not exist.
...
So isn't hy
On Fri, 13 Jan 2012, the wise Mark Blackman wrote:
On 13 Jan 2012, at 16:30, Marco Beishuizen wrote:
Hi,
I just upgraded from 8-STABLE to 9-STABLE on my dual Xeon (nocona). Now I have
in my boot messages:
...
root: /etc/rc.d/sysctl: WARNING: sysctl machdep.hlt_logical_cpus does not exist
Hi,
In 8.2 ipv6 was enabled by adding ipv6_enable="YES" in rc.conf, and all
worked fine. In FreeBSD 9 that changed to
ipv6_activate_all_interfaces="YES". But now there are still some error
messages at boot time, and ipv6 doesn't seem to work correctly:
...
root: /etc/rc: WARNING: $ipv6_firew
On Sat, 14 Jan 2012, the wise Yuri Pankov wrote:
In 8.2 ipv6 was enabled by adding ipv6_enable="YES" in rc.conf, and all
worked fine. In FreeBSD 9 that changed to
ipv6_activate_all_interfaces="YES". But now there are still some error
messages at boot time, and ipv6 doesn't seem to work correctly
On Sun, 15 Jan 2012, the wise Erik Nørgaard wrote:
Don't use ipv6, but reading above: Did you replace ipv6_enable with
ipv6_activate_all_interfaces? because the error seems to tell you that you
must keep ipv6_enable
I replaced it with the new lines because according to the manpage
ipv6_enabl
On Sun, 15 Jan 2012, the wise Erik Nørgaard wrote:
Don't use ipv6, but reading above: Did you replace ipv6_enable with
ipv6_activate_all_interfaces? because the error seems to tell you that
you must keep ipv6_enable
I replaced it with the new lines because according to the manpage
ipv6_enable
Hi,
I noticed that my Intel 82541GI gigabit ethernet controller uses a legacy
driver 1.0.3, instead of the in 9.0 standard em0 driver 7.3.2.
Why is this and is the legacy driver as good as the standard driver?
Regards,
Marco
--
The road to Hades is easy to travel.
-- Bion
___
Hi,
When booting my computer today I noticed the message at the end: starting
background filesystem check in 60 seconds. This seems strange to me since
SU+J is enabled on all filesystems. How is this possible? NB running
FreeBSD 9-STABLE
Regards,
Marco
--
In most instances, all an argument
p
On stardate Fri, 23 Dec 2005, the wise bob self entered:
> ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/nvidia-settings-1.0.tar.gz:
> size mismatch:
> expected 1091361, actual 1056908
> => Couldn't fetch it - please try to retrieve this
> => port manually into /usr/ports/distfiles/ and try ag
Hello,
I would like to add 2 SCSI disks to my RAID controller (an Intel SRCU42X,
the new disks are Seagate Cheetahs 36GB) and migrate to RAID 5. At the
moment the controller has 2 disks attached to it (also 2x Seagate Cheetah
36GB) in RAID 0.
According to the documentation of the controller t
Hi,
When building gnome2 from ports, it has problems building gnopernicus. It
exits with the following messages:
/usr/local/lib/libgthread-2.0.so.0: undefined reference to
`pthread_attr_destroy'
/usr/local/lib/libgthread-2.0.so.0: undefined reference to `pthread_create'
/usr/local/lib/libgthrea
Hi,
Is there a system monitor for freebsd that supports SMP? I've tried some
(gkrellm, xosview, xsysinfo) but they all show only one cpu. Or is there a
way to enable SMP in these monitors?
Thanks,
Marco
--
If you're going to walk on thin ice, you might as well dance.
___
On stardate Thu, 30 Mar 2006, the wise pete wright entered:
> On 3/30/06, Marco Beishuizen <[EMAIL PROTECTED]> wrote:
> >
> > Hi,
> >
> > Is there a system monitor for freebsd that supports SMP? I've tried some
> > (gkrellm, xosview, xsysinfo) but they
I'm trying to install xfce4 as my desktop manager on FreeBSD 4.10-STABLE.
But when I try this from the ports I get an error message (this actually
happens when I try to install everything that needs GTK so not only
xfce4):
...
./.libs/libgdk_pixbuf-2.0.so: undefined reference to 'ngettext'
***
Hi,
Since I upgraded to 4.10-STABLE I have a lot of problems installing
programs. Trying to install by FTP with sysinstall always results in
errors and sysinstall core dumps when it's accessing the cdrom. Also
installing from the ports results in a lot of errors.
It looks like a lot of programs
On stardate Sat, 19 Jun 2004, the wise Andy Harrison entered:
On Sat, 19 Jun 2004 18:56:57 +0200 (CEST), Marco Beishuizen
<[EMAIL PROTECTED]> wrote:
It looks like a lot of programs need gtk20, which doesn't install
correctly. When I try gtk20 the error is:
Please clarify "doesn
On stardate Sun, 20 Jun 2004, the wise Jan Muenther entered:
I'm trying to install gFTP from the ports. When I do a make install, it
constantly wants to install gtk20 instead of gtk12. Gtk20 isn't installed
on my machine due to errors during the build, but gtk12 is installed.
According to the gFTP
I'm trying to install gFTP from the ports. When I do a make install, it
constantly wants to install gtk20 instead of gtk12. Gtk20 isn't installed
on my machine due to errors during the build, but gtk12 is installed.
According to the gFTP website it shouldn't be a problem to install gFTP
with gt
On stardate Sun, 20 Jun 2004, the wise Geert Hendrickx entered:
The Makefile in ports/ftp/gftp has the option WITH_GTK2, which should of
course be unset if you want to compile with gtk12 (that seems to be the
default). Maybe you have some saved options in /var/db/ports/gftp/ ?
Then remove that fil
On stardate Sun, 20 Jun 2004, the wise Kent Stewart entered:
On Sunday 20 June 2004 03:54 am, Marco Beishuizen wrote:
I'm trying to install gFTP from the ports. When I do a make install,
it constantly wants to install gtk20 instead of gtk12. Gtk20 isn't
installed on my machine due to err
I tried to install the Linux emulator from the ports on FreeBSD
4.10-stable (i386) but it crashes when it installs:
...
===> Installing for linux_base-7.1_7
===> Generating temporary packing list
kern.fallback_elf_brand: 3 -> 3
glibc-common-2.2.4-33.i386.rpm
package glibc not listed in conflict i
Hi,
I don't know how to get sound from audio cd's. Normal sound works fine
(from mp3, movies etc.). I have an audio cable attached between the DVD
player (Plextox PX-712A) and the soundcard (Creative Audigy2), but that
doesn't help. All sound is maximized to 100% in mixer (not muted). The
CD-playe
On Fri, 2004-12-17 at 23:36, Lowell Gilbert wrote:
> Marco Beishuizen <[EMAIL PROTECTED]> writes:
>
> > I don't know how to get sound from audio cd's. Normal sound works fine
> > (from mp3, movies etc.). I have an audio cable attached between the DVD
> > pl
On Sat, 2004-12-18 at 21:53, Louis LeBlanc wrote:
> Something's not right with firefox.
>
> Now that I've got the printing problems more or less solved, it
> crashes almost every time I hit a page with flash.
>
> I've got the latest (from ports updated yesterday) native, and
> flashplugin-firefox
Hi,
I have a problem with fsck. After a lockup of X.org I couldn't use my
keyboard anymore and I had to reset the computer. When it rebooted fsck
didn't start immediately, but started after the login in the background.
After some checks fsck stops working but stays a running process (in
"getblk
On stardate Wed, 22 Dec 2004, the wise O. Hartmann entered:
Please try to boot your system in single user mode (type '4' in the start
screen, where the countdown can be watched)
an do a 'fsck -y'. Then watch whether your box gets stuck or.
If it also get stuck in single user mode, please report ag
On stardate Wed, 22 Dec 2004, the wise O. Hartmann entered:
Dear Marco.
Thanks. In my case, FreeBSD 5.3 dies in single user mode on nearly each disk
activity (it is obviously a FreeBSD 5.3-issue with
my ASUS CUR-DLS based system).
Please take a look at fsck_ffs(8) man page. There is at the end of
On stardate Wed, 22 Dec 2004, the wise Peter Risdon entered:
Well the problem didn't dissappear. I was just checking the filesystem with
the midnight commander, and suddenly mc froze in "ufs"-state. Now I'm
running fsck again.
What's being logged? Lots of dma errors in /var/log/messages?
Peter.
Hi,
I tried to upgrade firefox with portupgrade, but it fails with the
following error:
[EMAIL PROTECTED]># portupgrade firefox
Updating the ports index ... Generating INDEX.tmp - please wait..^Cfailed to
generate INDEX!
index generation error
/usr/local/lib/ruby/site_ruby/1.8/portsdb.rb:482:in
On stardate Sat, 8 Jan 2005, the wise Joshua Lokken entered:
You may be able to make this problem go away by doing:
# cd /usr/ports
# make fetchindex
Yes, this did the trick. I should have read /usr/ports/UPDATING though,
because the answer was in it...
Thanks for the answers.
Marco
--
Minnie Mou
On stardate Wed, 23 Mar 2005, the wise Andreas Davour entered:
I have hit upon another problem with my new system. Acroread is now version 7
(what was wrong with the previous version, Adobe? *shrug*) and since it is a
Linux binary it naturally depends on Linux libraries. But, some of those
libra
On stardate Wed, 23 Mar 2005, the wise Andreas Davour entered:
Exactly the same.
As Erik (et al) wrote, it will all be pulled in and resolved as dependencies
if you have a sufficienyly up-to-date ports tree.
Kind of annyoing that it wasn't caught before it was comitted at all, but
considering th
On stardate Wed, 23 Mar 2005, the wise Ean Kingston entered:
Hmm I also did a cvsup, but it makes no difference, I still get the sam
error. I guess I have an other problem on my system.
You may need to do a make clean or a make distclean in the port directory
after doing a cvsup. I've found that so
Hello,
I tried to portupgrade firefox from 1.0.1 to 1.0.2, but it fails with the
following messages:
nsFontMetricsPS.cpp: In member function `nsresult nsFontPSFreeType::Init(nsITrue
TypeFontCatalogEntry*, nsPSFontGenerator*)':
nsFontMetricsPS.cpp:1144: error: 'struct FTC_ImageTypeRec_' has no mem
On stardate Sat, 26 Mar 2005, the wise Michael Johnson entered:
you need to update print/freetype2 to 2.1.9 and re-start the build.
(you don't have to remove firefox WRKSRC)
Michael
Yes, this worked. Thanks.
Marco
--
I call them as I see them. If I can't see them, I make them up.
-
On stardate Tue, 13 Jan 2004, the wise Kevin R. Lee entered:
> Sorry, one more question, what does DEC Alpha stand for?
DEC stands for Digital Equipment Corporation. Alpha is the 64-bit
processor they make. Digital as a company doesn't exist anymore, Compaq
bought it some time ago.
I have a Perso
Hi,
I would like to change the hostname of one of my machines without a
reboot. Is it enough to change my rc.conf and run the /etc/netstart script
or do I have to do something else?
Thanks,
Marco
--
Please ignore previous fortune.
___
[EMAIL PROTECT
On stardate Wed, 14 Jan 2004, the wise Jonathan T. Sage entered:
> a simple
>
> # hostname new.host.name
>
> should do what you're asking. also add it to rc.conf so the changes
> stay on next reboot
Well, I did this and it looks fine now. Thanks!
Marco
--
Man is the only animal that can remai
Hi,
After trying to play a little mpeg movie in mplayer, FreeBSD crashed
(nothing worked anymore) and I had to reboot the system.
When the system rebooted I suddenly received tons of messages:
...
es1371: wait src ready timeout 0x10 [0x]
...
And after that:
...
pcm0: ac97 codec invalid
Hi,
I just installed FreeBSD 4.10-RELEASE on my PWS 600au and it comes with
Xfree86-4.3.0. I can't seem to start X while Xfree-3.3.6 worked fine.
My PWS has a Matrox G450 PCI videocard. I tried both the generic Matrox driver
and the G400 driver in xf86config, but get the same errors.
The errors
On stardate Sun, 30 May 2004, the wise Thomas Schwarzkopf entered:
On Saturday 29 May 2004 17:56, Marco Beishuizen wrote:
(WW) MGA: No matching Device section for instance (BusID PCI:1:0:0)
found (EE) No devices detected.
Fatal server error:
no screens found
...
X connection to :0.0 broken
On stardate Sun, 30 May 2004, the wise Jean-Francois Gobin entered:
What did he do when you press [CTRL][ALT][BACKSPACE] ?
JF
I think that killed xfree as it should but the monitor still remains black
with the big warning. The only way to get into the cli again is to reboot
the machine.
Marco
--
On stardate Sun, 30 May 2004, the wise Jean-Francois Gobin entered:
Also, it seems to me that you've got two cards in your system. What about
a small "pciconf" ?
JF
No I have only one card in it. Pciconf -l says the Matrox has BusID 1:0:0.
Marco
--
Spelling is a lossed art.
On stardate Sun, 30 May 2004, the wise Bernd Walter entered:
On Sun, May 30, 2004 at 04:11:07PM +0200, Marco Beishuizen wrote:
On stardate Sun, 30 May 2004, the wise Jean-Francois Gobin entered:
Also, it seems to me that you've got two cards in your system. What about
a small "pciconf&
I used to have two ifconfig lines in my rc.conf:
ifconfig_dc0="DHCP"
ifconfig_dc0="media autoselect"
The first to enable DHCP and the second to set my networkcard to 100BaseTX
full duplex.
Now after an upgrade to 4.10-release this doesn't work anymore. When I put
both lines in rc.conf only the s
On stardate Sun, 30 May 2004, the wise Joost Bekkers entered:
On Sun, May 30, 2004 at 11:34:43PM +0200, Olaf Hoyer wrote:
2) put the media change in a separate shell script, and throw it unter
/usr/local/etc/rc.d, so that it will be executed later on
something like:
cat dc0-speedchange.sh
#!/bin/sh
On stardate Sun, 30 May 2004, the wise Warren Block entered:
On Sun, 30 May 2004, Marco Beishuizen wrote:
I used to have two ifconfig lines in my rc.conf:
ifconfig_dc0="DHCP"
ifconfig_dc0="media autoselect"
The first to enable DHCP and the second to set my networkcard to 10
Hi,
Since I installed a new version of "pango" none of the gnome applications
work anymore:
...
[EMAIL PROTECTED]>$ gnumeric
/libexec/ld-elf.so.1: Shared object "libpangoft2-1.0.so.600" not found,
required by "gnumeric"
you have mail
[EMAIL PROTECTED]>$ jpilot
/libexec/ld-elf.so.1: Shared ob
On stardate Sat, 2 Jul 2005, the wise [EMAIL PROTECTED] entered:
On Sat, 02 Jul 2005 14:53:54 +0200 (CEST)
Marco Beishuizen <[EMAIL PROTECTED]> wrote:
Since I installed a new version of "pango" none of the gnome
applications work anymore:
...
[EMAIL PROTECTED]>$ gnumeric
/
Hi,
I just upgraded the Abiword port to 2.4.1. But after installation Abiword
didn't start up, but gave an error message instead:
/libexec/ld-elf.so.1: Shared object "libgtk-x11-2.0.so.600" not found,
required by "abiword".
I thought I just needed to start X again, so I did, but that also doe
On stardate Tue, 15 Nov 2005, the wise Hans Nieser entered:
- Install www/linuxpluginwrapper
- Install www/linux-flashplugin7
- Put following in /etc/libmap.conf
[/usr/X11R6/lib/linux-flashplugin7/libflashplayer.so]
libpthread.so.0 libpthread.so.2
libdl.so.2
On stardate Wed, 16 Nov 2005, the wise Tino Boss entered:
Marco Beishuizen wrote:
- Link the plugin:
ln -s /usr/X11R6/lib/linux-flashplugin7/libflashplayer.so
/usr/X11R6/lib/browser_plugins/
I have flashplugin6 working here. To install it, I also linked a second file
called
Hi,
In order to build gnumeric, I have to build goffice first. But when I try
it fails with:
...
Requested 'libgsf-1 >= 1.13.3' but version of libgsf-1 is 1.11.1
...
But my libgsf, as well as libgsf-gnome, are both version 1.13.3. My
portstree is up to date.
Does anyone has a clue how to
I would like to enable sound for my dvd player so I can listen to audio
cd's. I installed the driver for my Audigy2 in the ports (emu10kx). Sound
is working fine, except for audio cd's.
I once had the old driver installed which came with "emuctrl", a program
which controls the volume. Entering
On stardate Mon, 28 Nov 2005, the wise Lowell Gilbert entered:
> Sounds like you don't have an analog audio cable; these are not coming
> installed standard as often as they used to, as Windows is doing
> digital sound by default these days. If this is the problem, you can
> either put in such a
On stardate Mon, 28 Nov 2005, the wise Lowell Gilbert entered:
> I don't know anything about this driver (you said you're using the one
> from the audio/emu10kx port), but there seem to be a bunch of knobs to
> play with. One is the analog/digital mode, which may be related (as I
> mentioned befo
On stardate Mon, 28 Nov 2005, the wise Lowell Gilbert entered:
> Unfortunately, there is more than one chipset in different cards that
> are called by that name.
My dmesg says:
pcm0: port 0xee80-0xeebf irq 21 at device 4.0 on
pci6
pcm0:
Does this mean it has a "SigmaTel" chip? The user manua
1 - 100 of 198 matches
Mail list logo
