Hi,
Will FreeBSD 5.2 (RC1, 2 or RELEASE) support the 3Com 3C90x based n/w
controller (Broadcom PHY) present on the A7N8X Deluxe motherboard?
Also, will there be a driver for the Sil 3112 SATA driver?
Thanx and Regards
Gautham
___
[EMAIL PROTECTED] mai
On Saturday, December 13, 2003 4:37 PM, anubis wrote:
> On Thu, 11 Dec 2003 08:25 pm, Gautham Ganapathy wrote:
> > Hi,
> >
> > Will FreeBSD 5.2 (RC1, 2 or RELEASE) support the 3Com 3C90x based n/w
> > controller (Broadcom PHY) present on the A7N8X Deluxe motherboard?
&g
lt samba versions they came with, and both clients are kept
upto date
it could possibly be a problem with the default ubuntu server configuration,
but i have not checked it out yet
--
Gautham Ganapathy
http://lisphacker.org
___
freebsd-questions@freeb
gt; freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
>
I used to get a somewhat similar problem on my laptop which has a
resolution of 1440x900. It was initially setup through xorgconfig as
1024x768 with the nv driver, but the fonts looked extremely blurred.
When I manually set the resolution to 1440x900, X gave an error that
there were no available modes to match this resolution. Finally, I had
to switch to the nvidia binary driver (after removing freebsd amd64
and installing i386) , which accepted this resolution.
Perhaps, there is a more specific driver for that chipset than the i810 driver?
--
Gautham Ganapathy
http://lisphacker.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hi
I am trying to get my nokia n80 working under freebsd (7-stable) with the
umodem driver. Running udesc_dump from ports shows that this phone supports
the Abstract Control Model in the Communication Device Class, but it only
comes up as a ugen device even with the ucom and umodem devices loaded
On 28 January 2012 19:54, Henry Olyer wrote:
> I've been using FBSD since 2000 and a Macsyma user since 1976.
>
> And done my own FBSD installs since 5.1, I think, maybe a few before. For
> those early years I was content to install a lisp and then do my own FTP's,
> getting maxima and doing thin
/boot on UFS). It kept giving errors just before
completion. However, some comments I found while googling about that
problem mentioned that the installation seemed to have completed,
which seems to be the case. Both FreeBSD and FreeDOS are now installed
on the same
Hi
I am trying out FreeBSD on ZFS using the PC-BSD 8.2 installer. I have
it installed on a Western Digital USB HDD connected to an Alienware
m11x laptop. It seems to work well except that once in a while, any
application performing a write freezes for a few seconds (around 15 or
so) and looking at
On Mon, Apr 18, 2011 at 4:58 PM, Gautham Ganapathy
wrote:
> Hi
>
> I am trying out FreeBSD on ZFS using the PC-BSD 8.2 installer. I have
> it installed on a Western Digital USB HDD connected to an Alienware
> m11x laptop. It seems to work well except that once in a while, an
On Tue, Apr 19, 2011 at 7:58 AM, bw wrote:
> On Mon, 2011-04-18 at 19:23 +0000, Gautham Ganapathy wrote:
>> > Under /dev, I can see six devices dsp0.0,dsp1.1,dsp2.1,dsp3.1,dsp4.0
>> > and dsp5.1. I tried playing an mp3 file using mpg123 and gave each of
>> > these de
On Sat, May 7, 2011 at 10:42 PM, Devin Teske wrote:
> Hi list,
>
> I hope that you can offer some suggestions to help make some sense of this
> odd situation. The situation is that we install FreeBSD 8.1-RELEASE onto
> standard Intel workstation hardware. We then add about 400 packages to the
>
On Thu, Sep 15, 2011 at 10:46 PM, Allen wrote:
> Sorry for top posting but can anyone send this to "Computer Stupidities"
> ? It seems to good to waste like this. Anyone who thinks they're a
> Hacker yet doesn't know how FTP works is not only funny, it's
> entertainment. And also, the web site I'
both show this problem. It used to work properly before on
previous versions
Regards
Gautham Ganapathy
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[
On Sat, 2006-03-25 at 19:06 -0300, Luiz Eduardo Guida Valmont wrote:
> Hi,
>
> its dependancies) overnight. But I woke up the next day to find the login
> prompt and a few (2, i guess) messages of bad blocks somewhere in the /usr
> filesystem
>
> The HD is a Seagate one.
>
I used to have the
Hello,
Has anyone been able to get the nvidia display drivers (6113) to work
on the ASUS A8V-Deluxe motherboard (K8T800-Pro chipset) in 32-bit mode
(5.2.1-RELEASE)? I have tried nvidia's internal GART support as well
as freebsd's, but the system hangs on starting X and requires a hard
reset. I als
On Sun, 2004-12-26 at 07:39, haruko wrote:
> On 12/25/04 12:23:09, Peter Harmsen wrote:
> > I have a FreeBSD box on a Elitegroup K7S5A mobo with a Asus TI4200
> > AGP
> > 8x graphics card and AMD 512 MB sdram XP2000+ CPU.I get 3600 FPS with
> > glxgears after i recompiled the kernel without agp an
Hi,
Are there any plans to release the 4-CD packs for 5.2 that used to be there
for 4.7-RELEASE and before? Or will this only be available for sale via
freebsdmall?
Regards
Gautham
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/lis
On Tuesday, February 03, 2004 6:11 PM, Kris Kennaway wrote:
> On Tue, Feb 03, 2004 at 02:22:14PM +0530, Gautham Ganapathy wrote:
> > Hi,
> >
> > Are there any plans to release the 4-CD packs for 5.2 that used to be
there
> > for 4.7-RELEASE and before? Or will this onl
Hi,
I have installed 5.2.1-RELEASE on my system (Athlon XP/nForce 2
Ultra/GeForce 3). Unfortunately, I am not able to use nVidia's fbsd drivers.
I saw a few posts that mentioned it would work under fbsd-5 although it was
written for 4. Any idea on what might be the problem?
The initial bootup giv
On Thu, 27 May 2004, Senandung Mendonan wrote:
> On Thu, 27 May 2004, Gautham Ganapathy wrote:
>
> > I have installed 5.2.1-RELEASE on my system (Athlon XP/nForce 2
> > Ultra/GeForce 3). Unfortunately, I am not able to use nVidia's fbsd
> > drivers. I saw a few posts
On Mon, Oct 4, 2010 at 5:11 AM, Leandro F Silva wrote:
> Hi guys,
>
> Which OS are you using on your notebook, FreeBSD / Linux or MAC ?
> Also, can you tell us the hardware, Sony / HP etc..
>
> Thank you !
> ___
I would prefer FreeBSD, if not for the la
On Tue, Dec 7, 2010 at 5:11 PM, krad wrote:
>
> the easiest way to do zfs root is use the pc-bsd disk but select the freebsd
> install not the pc bsd one
I tried that last week with the PCBSD 8.1 DVD. Unfortunately, to
install on ZFS, you need to go to advanced mode when creating
partitions, whic
On July 24, 2010 08:04AM, Paul B Mahol wrote:
> On Fri, Jul 23, 2010 at 8:33 PM, Gautham Ganapathy wrote:
>> Hi
>>
>> I have an Alienware m11x with a Dell 1520 wireless minicard (Broadcom
>> BCM4353 chipset). It comes with only Windows 7 drivers, but I was able to
>
Hi
I have the Killer 1103 wireless card with a AR9380 chipset on my
laptop. Will this be supported under freebsd-9-*? The freebsd wiki
(http://wiki.freebsd.org/dev/ath%284%29/80211n) mentioned support for
the AR9280, AR9285 and AR9287 in -HEAD.
Cheers
Gautham
_
Hi
Since it is possible to run IPv6 and IPv4 on the same network, and most
routers supposedly support IPv6, why is there a need to have the IPv6
network seperate from the internet ? as long as the client and the
server are both IPv6 enabled (and the routers in b/w), shouldn't this
work properly?
Hi
Will the nvidia drivers work with 4.7-RELEASE? 4.7-STABLE won't have
ISOs, right?
Regards
Gautham
BEGIN:VCARD
VERSION:2.1
N:Ganapathy;Gautham
FN:Gautham Ganapathy
ORG:Wipro Technologies;TI PIC (DSP)
TITLE:Technical Support Engg
TEL;WORK;VOICE:+91-80-8520408x4277
TEL;HOME;VOICE:+91-80-6542292
Hi
Will the nvidia drivers work with 4.7-RELEASE? 4.7-STABLE won't have
ISOs, right?
Regards
Gautham
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
On Friday, November 22, 2002 5:05 AM, Laszlo Vagner wrote:
>
> lewiz wrote:
>
> >On Thu, Nov 21, 2002 at 08:25:39AM +0530, Gautham Ganapathy wrote:
> >
> >>Will the nvidia drivers work with 4.7-RELEASE? 4.7-STABLE won't have
> >>ISOs, right?
> >
On Friday, November 22, 2002 5:05 AM, Laszlo Vagner wrote
>
> lewiz wrote:
>
> >On Thu, Nov 21, 2002 at 08:25:39AM +0530, Gautham Ganapathy wrote:
> >
> >
> >>Will the nvidia drivers work with 4.7-RELEASE? 4.7-STABLE won't have
> >>ISOs, righ
On Sunday, December 08, 2002 2:01 AM, Cliff L. Biffle wrote
>
> I'm running 5.0-DP2 on an Asus motherboard with the Apollo
> KT133 chipset. The
> chipset is notoriously buggy, according to the folks on
> -current, and I've
> been having trouble with the USB and ATA controllers -- though it's
> int
Hi
FreeBSD 4.7-RELEASE crashes when I call the auxInitWindow() function from the GLaux
library. Is this known to happen with the beta driver? Does nVidia have any plans on
releasing a stable version?
Also, I am unable to run the UT2003 demo, which just gets stuck after the initial
splash scree
On Wednesday, June 04, 2003 12:43 AM, Lucelio wrote
>Hi, I was trying the FreeBSD 5.0 and the installation was perfect, but,
> when I tried to run the Gnome, my mouse didn't work. Here is the
> configuration of my machine:
> Intel Pentium 4 - 1.6 GHz / 256 MB RAM / HD: 20 GB. The motherboard i
weeks back.
Additionally, the wpi man page mentions that it only permits one
virtual interface at a time. Is this a h/w limitation? If not, will
support for multiple interfaces be added?
Regards
Gautham Ganapathy
___
freebsd-questions@freebsd.org mailing
e scheduler would be able to do with the
> information. It's automatically applied by the chip on any core in P0
> state, no?
>
won't it be affected by CPU affinity?
--
Gautham Ganapathy
http://lisphacker.org
___
freebsd-questions
7;t need on FreeBSD.
>
> Basically, I'm looking for a FreeBSD VPS vendor that's as highly regarded as
> Linode.
>
> Thanks for your thoughts.
>
You could also take a look at jvds.com. It's based on freebsd jail
though, not xen, so there is a slight loss in
Hi
The FreeBSD mailing lists also seem to be available in yahoo groups. Are
these mirrors of the ones at freebsd.org? If I join a groups and post a
message there, will it also appear here?
Regards
Gautham
___
[EMAIL PROTECTED] mailing list
http://lists
Hi,
I am having problems getting sound and networking with my A7N8X-Deluxe
motherboard. This seems to be a common problem. I found a few posts which
suggested using 'device xl' (3Com) in the kernel configuration file and
adding snd_ich_load="YES" in /boot/loader.conf to fix these problems. But I
a
Hi,
I have jdk 1.5 built and installed on my system running 6.0-rel.
However, when I open a page containing an applet in firefox, i get a
message saying 'Additional plugins are required to display all the media
on this page'. o found a similar reports on the net, but no solutions.
anyone know how
On Thu, 2006-04-20 at 09:04 -0700, pete wright wrote:
> On 4/19/06, Gautham Ganapathy <[EMAIL PROTECTED]> wrote:
> > Hi,
> >
> > I have jdk 1.5 built and installed on my system running 6.0-rel.
> > However, when I open a page containing an applet in firefox, i get
On Thu, 2006-04-20 at 17:46 -0500, Conrad J. Sabatier wrote:
> On Thu, 20 Apr 2006 10:15:30 +0530
> Gautham Ganapathy <[EMAIL PROTECTED]> wrote:
>
> > Hi,
> >
> > I have jdk 1.5 built and installed on my system running 6.0-rel.
> > However, when I open a
not go off
on it's own. Not sure if these are connected.
--
Gautham Ganapathy
http://lisphacker.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to &q
but i believe the replacements are the
inspiron 1720 and the xps 1730
I am not sure if the newer 4965 802.11n wifi chipset that are
currently available would be supported, but you could opt for the 3945
--
Gautham Ganapathy
http://lisphacker.org
___
Hi
I have installed the diablo jdk package downloaded from the freebsd
foundation page. Now, when I try to build the azureus port, it also
tries to build jdk1.4.2 because log4j depends on that port. How can I
get the ports system to use the installed jdk instead of building 1.4.2?
I am using freeb
On Thu, 2006-08-03 at 17:39 -0700, Micah wrote:
> Gautham Ganapathy wrote:
> > Hi
> >
> > I have installed the diablo jdk package downloaded from the freebsd
> > foundation page. Now, when I try to build the azureus port, it also
> > tries to build jdk1.4.2 b
On Mon, 2006-07-31 at 06:28 -0700, Joshua Lewis wrote:
>I installed wine on my 6.1 system but I don't see a config file
>anywhere on the system. Has anyone installed and used Wine
>successfully that could point me towards an easy FreeBSD how to? Or
>something similar. I told my 7 ye
g/gnome/docs/halfaq.html#q3. If this was a fresh
install of 7.3 (GNOME 2.28), just do steps 1 and 2, ignore the
instructions before and after, restart GNOME and then plug the drive
in. It should get mounted and appear on our desktop (well, it work
Hi
I have an Alienware m11x with a Dell 1520 wireless minicard (Broadcom
BCM4353 chipset). It comes with only Windows 7 drivers, but I was able to
download Windows XP drivers seperately. However, after I generate the kernel
module (I am using the 64-bit WinXP driver and freebsd amd64), I get error
On Sun, Jul 25, 2010 at 1:16 AM, Jerry wrote:
> On Sat, 24 Jul 2010 18:45:24 +
> Paul B Mahol articulated:
>
>
> > On 7/24/10, Jerry wrote:
> > > On Sat, 24 Jul 2010 12:01:24 +
> > > Paul B Mahol articulated:
> > >
> > >> Such symbols are completly irrelevant for normal operation, beca
On Mon, Aug 23, 2010 at 8:50 AM, Sergio Tam wrote:
> 2010/8/23 Matthias Apitz :
>>
>> Hello,
>
> Hi Matthias
>>
>> Any recommendation for the virtualisation software for best performance?
>
> VMware
>
> or Virtual PC
>
> http://www.microsoft.com/Windows/virtual-pc/download.aspx
>
>
Hi
The free V
___
Perhaps you could contact the authors of the code you are trying to
compile and ask them how they did it. They might have a
straightforward solution and maybe a reason as to why they chose BSD
make
Also, have you tried bmake?
Regards
Gautham Ganapathy
http://lisphacker.org
_
ilt linux-based CUDA application to work
freebsd's linuxulator. Does this mean that the driver is ready, and
just the toolchain has to be ported?
Regards
Gautham Ganapathy
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.or
51 matches
Mail list logo
