Dear FreeBSD Team:
This is Frederick. Is there any table to list the partition number(subtype) or sysid?
I have two hard disks. The first one install windows, and the second one install
freebsd.
I first install windows, then install freebsd. I use boot manager to manage my boot.
The menu shows
Hi,
I have just started learning to use vi, and remember someone posting
something a while ago about how to re-format an email reply to have proper
60 character width or something like that, does anyone remember how that
is done?
Thanks,
Fred
___
[EMAIL
Hello Everyone,
At work there are some unused ip addresses but we dont know which ones
they are (because there are alot of computers) is there a port which could
be used to ping the subnet over a few days to work out which ip addresses
are actually coming online? Thanks
Fred
_
This is slightly off topic, but I have just setup ipfw and was wondering
if there was a way to get the log messgaes popup in a window (ie so if
someone attempts to connect, you get notified)? Some /usr/ports perhaps?
___
[EMAIL PROTECTED] mailing list
htt
now, i cant get the system to boot off the disk, i have even tried
eraseing it with fdisk (freebsd and dos versions). Does anyone know how I
can save it? I have tried everything and dont know where else to ask.
Frederick
___
[EMAIL PROTECTED] mailing
>> Now I had to move it to a new computer in which the bios
>> detects a certian geometry, but then the system wont boot.
>> No matter what I do now, i cant get the system to boot off
>> the disk, i have even tried eraseing it with fdisk (freebsd
>> and dos versions). Does anyone know how I can sav
>>> Now I had to move it to a new computer in which the bios detects a
>>> certian geometry, but then the system wont boot. No matter what I do
> I had the same problem back in 4.5. I worked around the problem by
> formating the hard drive with a Win98(Oh Boy) recovery floppy then
> ...
Formattin
Shalom,
I have been trying to avoid contacting you since I know that your engaged,
however
I have come to the end of my resources. I have a dual boot with win98 and freebsd 4.8
on a Dell Optiplex GX1(tower). I have attempted to configure the sound [crystalcs4236b
onboard audio controller] f
shalom,
I have a question which I hope that you can help me with. I just tried to
intstall
rpm-4.0.4.tar.gz on my system[freebsd 4.8] and have not been able to get it to
./configure let alone make. Is there a special dir, ( /usr/compat/linux?), or
dependencies
that are required to compile
I'm attempting to remove a number of old files within a directory that
was rsynced over from another box. However a number of files (old
symlinks and regular files in this instance) cause a kernel panic when
attempting to remove them using rm or unlink.
This is the panic message output:
Fatal t
via Linux results in
`rm` either being killed or hanging.
Ryan
On 02/10/2012 10:43 AM, Ryan Frederick wrote:
I'm attempting to remove a number of old files within a directory that
was rsynced over from another box. However a number of files (old
symlinks and regular files in this instance)
You can recompile all ports that depend on pcre so that they'll use the
new shared library.
You can do so with:
# portmaster -r pcre-8.30
Ryan
On 02/15/2012 08:42 PM, Antonio Olivares wrote:
> Dear folks,
>
> I updated ports and one failed, gimp-app. I checked /usr/src/UPDATING
> and I followe
It looks like others have run into this problem with avahi-app as well:
http://lists.freebsd.org/pipermail/freebsd-ports/2011-July/068658.html
A cursory search shows that uninstalling avahi-app then reinstalling
should take care of the compilation failure. Afterward you should be
able to run p
I have several FreeBSD 9 systems with custom compiled kernels. After
using freebsd-update to go from 9.0-RELEASE-p2 to 9.0-RELEASE-p3 this
morning I rebuilt the kernels. However after recompiling, installing,
and rebooting with the custom kernels subsequent update checks using
freebsd-update cr
, Ryan Frederick wrote:
> I have several FreeBSD 9 systems with custom compiled kernels. After
> using freebsd-update to go from 9.0-RELEASE-p2 to 9.0-RELEASE-p3 this
> morning I rebuilt the kernels. However after recompiling, installing,
> and rebooting with the custom kernels subsequent u
Forgot to cc the list.
On 04/24/2013 04:47 PM, Ryan Frederick wrote:
I believe mimencode is in ports as converters/mmencode. It is also
included as part of mail/metamail.
Ryan
On 04/24/2013 04:07 PM, Martin McCormick wrote:
Is there a filter that one can run in procmail in which
base64
I have a number of boxes running 9.1-RELEASE (amd64) that I updated to
p3 yesterday via freebsd-update. However freebsd-update still indicates
that linker.hints needs to be updated. Running `freebsd-update install`
appears to install a new linker.hints file but still doesn't appear to
satisfy f
The Apache site has documentation on upgrading from 2.2 to 2.4 --
http://httpd.apache.org/docs/2.4/upgrading.html
The main change for me was the new allow/deny syntax.
I've updated almost all of my Apache installs from 2.2 to 2.4 with no
issues. The only installs I haven't updated yet are thos
Update your ports vulnerability database before attempting to compile
curl. `portaudit -Fda` should do the trick.
Ryan
On 07/02/2013 08:49 AM, Reggie Euser wrote:
We're running FreeBSD 8.3-RELEASE-p3 and portaudit says:
Affected package: curl-7.24.0_2
Type of problem: cURL library -- heap cor
There was an entry in vuxml for lcms2 < 2.5 earlier this week that
initially included 2.5 accidentally. It's been corrected now, so an
update of your ports vulnerability database should allow you to
install/update lcms2.
Ryan
On 08/20/2013 01:15 PM, Kurt Buff wrote:
On Tue, Aug 20, 2013 at
Greetings and salutations;
I am having a puzzling issue with natd under FreeBSD
5.2, in which it will translate icmp and udp packets
just fine, but tcp connections from the inside network
to the outside world cannot be established. I can
lookup hostnames, ping etc. from the internal client
box, bu
Im running FreeBSD 5.3, its an almost fresh install. Its been running
for about 7 days now. I have an internal IDE drive that the OS runs
from, then I have two external firewire drives (da0, da1) that are
only used as Samba shares.
This morning i found that one of the firewire drives are no longer
Hello,
I'm trying to get some help installing the tarball in the subject line because I do
not have an internet connection at home, and every time I have tried to build a binary
from source
I've have been unable to because of some missing dependencies. I'm new to asking for
help but I would lik
shalom,
I read the manpage on devfs and can't make heads or tails of it. I've a cs4236
onboard pnp sound card that took 2 months to finally get running and I'm gonna wait
that
long this time. My box is a dell optiplex gx1 and using old school rules catted
dmesg.boot and found pcm0 but when
Hi,
is there anyone who has documentation other than the manpage for freebsd's
implementation of devfs? I have researched all the websites that I know of and have
been unable to find any comprehensive doc on the subject. I've been trying to set a
pnp onboard soundcard cs4236 and other than
hi
I just wondering if anyone is still out there who cn actually help me with the
problem I'm having with devfs and my sound card. devfs did'nt automatically create any
node I would normally expect to find , [/dev/snd/;/dev/dsp(although it did create
dsp0.0 and 0.1);
/dev/audio(for the spa
Hi,
I was hoping to try out FreeBSD on an old machine I have been given
(Pentium 120, 514MB HD, 8mb ram) and it reboots after loading the mfsroot
floppy disk. You insert the disk, it goes /|\|/ for a while then reboots.
What might cause this problem?
Fred
"Frederick Bowes" <[EMAIL PROTECTED]> writes:
> I was hoping to try out FreeBSD on an old machine I have been given
> (Pentium 120, 514MB HD, 8mb ram) and it reboots after loading the
> mfsroot
> floppy disk. You insert the disk, it goes /|\|
shalom,
I haven't found any docs to tell me how to get this up and running yet. I have a
Abit VA-10 mobo with via graphics and sound onboard. I found that Xfree86.org had
updated to 4.4.0 and was able to install binaries without too much trouble, so I have
X/Kde up. So
does anyone know how I
When you define the virtual serial port in VirtualBox for the guest VM
one of the options available for connection of the port to the host
system is a named pipe (I believe it's called "Host Pipe" in the
configuration). You can then specify whatever named pipe on the host
system you wish to att
What option argument did you specify for the -V (volume ID) option when
you created the ISO with the `mkisofs` command? I believe that the root
filesystem lies under /dev/iso9660/ for which the ISO loader's
default configuration specifies as /dev/iso9660/FREEBSD_INSTALL. Thus
you'll need to cha
st? Thank you for any
suggestions.
Frederick N. Brier
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
cting Packages, and it worked.
Fred.
Frederick N. Brier wrote:
I am running into a problem installing packages via sysinstall within
a jail using the CD media. I did a minimal install, but added the
/usr/src directory. I followed the directions to setup a jail and
copied /stand/sysinstall into the
this not the case? Is there a patch? Is
there another way to do this? Thank you.
Frederick N. Brier
Multideck Corporation
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
is or what caused the
it. Any help or hints as to how to diagnose the problem or fix this would be
greatly appreciated. Thank you.
Frederick N. Brier
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
How do I reinstall just the standard MBR/Boot Manager without effecting
anything else or accidentally doing a reinstall?
Frederick N. Brier
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
ng
in the correct directory on the correct slice. Please point me to a
howto or docs on how to repair an installation without wiping out all
the files and packages I have already installed/loaded/configured on
this system. Thank you.
Frederic
I need to load a module so that the 3Ware drive "twe" is
loaded? The loaddev and currdev variables are both set to "disk1s1a:"
Thank you again.
Fred.
Giorgos Keramidas wrote:
On 2005-09-06 11:13, "Frederick N. Brier" <[EMAIL PROTECTED]> wrote:
Giorgo
Fred.
Giorgos Keramidas wrote:
On 2005-09-06 19:34, "Frederick N. Brier" <[EMAIL PROTECTED]> wrote:
More info. If I "ls" either before or after setting the bootpath or
module_path environment variables, the response is: "open '/' failed:
no such file o
39 matches
Mail list logo
