installer, the screen goes blank and I'm left with nothing but an
eternal blinking cursor. Am I up against another Intel S3210SHLC
motherboard problem or does UNetbootin not actually live up to it's
claims for FreeBSD 7.0? Anyone know?
Is there anyone out there
Jeremy Chadwick wrote:
On Wed, Oct 01, 2008 at 02:41:03AM -0700, Carl wrote:
I've been trying to create a modified FreeBSD 7.0 install CD that will
allow me to do installations entirely via the serial console on a
headless system. Lots of digging on the Internet, reading the handbook,
else entirely.
I've had a couple of incidents where pressing the reset button actually
powers down the server for 5 seconds or so before automatically powering
back up. Not a big deal, but doesn't instill confidence in this motherboard.
Carl
t, but nothing complete. Surprising, actually, when
you think about it.
No one else out there with experience combining the Intel S3210SHLC
motherboard and FreeBSD?
Carl / K0802647
___
freebsd-ques
.iso, which I then burned
and tried. End result? Abject failure again. All boot stages still use
the internal console.
Just after "Loading /boot/defaults/loader.conf" appears, there is a
*very* long pause added as compared with the unmodified install CD.
Eventually it resumes. Don&
ly nothing about NFS, so excuse what is probably a stupid
question... is it possible to use sysinstall's NFS capabilities to mount
a local UFS filesystem somehow?
Carl / K0802647
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
be my only hope
unless I want to move to another OS.
Carl / K0802647
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ation, it seems to end with adding
.journal entries to /etc/fstab. Am I trying to achieve the
impossible or ill-advised here?
Carl / K0802647
___
freebsd-questions@freebsd.org mailing list
http://lists.free
an occur in /var and the scenario my server will
occupy has me concerned about inglorious shutdowns.
What are the actual reasons for why journaling a small partition is
considered a bad idea?
Carl / K0802647
___
Any chance you'd like to share your command sequence for constructing
your gmirror'd and gjournal'd filesystem, Volodymyr? :-)
Carl / K0802647
___
freebsd-questions@freebsd.org mailing list
http://
rithm. Does "round-robin" not mean simply alternating
between the two disks without ever splitting requests?
What are the considerations in choosing between "load", "prefer",
"round-robin", and "split" balance algor
ere is no difference between "split" and "round-robin" algorithms then?
Carl / K0802647
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
r the journaled
partitions in the mirror, but not for the rest?
Carl / K0802647
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
possible. Fortunately, this is all about constructing a new system,
so there's no data yet to lose.
Is there anything I should know about this model of hard disk with
regards to being known for problems? Also, is there a good test I can
perform to hopefully flush ou
0x0010 100 100 000Old_age Offline
- 2
...
>
And here we see the core of the problem. :-)
Advice is simple: replace this hard disk.
Hope this helps.
It definitely did, Jeremy. Your explanations were most helpful. Thanks!
Carl
Carl wrote:
I've built a GEOM mirror on a single slice of a single disk and am about
to insert the second disk. Of the partitions in the mirror, I made only
a few of them gjournal'd. I've seen it recommended that one disable
autosynchronization for the mirror if using journa
solution?
Given that I do not want to customize the port's Makefile, I was hoping
'make' would support a command line option that would let me simply
point to a separate file containing the list of variables to add, one
per line. It'
make file. If I'm correct, that doesn't seem
to me to be a good idea from a maintenance perspective. I was hoping for
something like the -f option that somehow inserted rather than replaced.
Carl / K0802647
__
On 2011-04-22 4:13 AM, Manolis Kiagias wrote:
On 04/22/2011 10:33 AM, Manolis Kiagias wrote:
On 04/22/2011 10:08 AM, Carl wrote:
This form will override the Makefile present in the current directory
and will use the specified make file with name your_own_make_file_name .
make -f
.FreeBSD.org/pub/FreeBSD/ports/distfiles/gd-2.0.35.tar.bz2:
Syntax error, command unrecognized
=> Couldn't fetch it - please try to retrieve this
=> port manually into /usr/ports/distfiles// and try again.
*** Error code 1
Stop in /usr/ports/graphics/gd.
What is the recommende
he context of this discovery was trying to use the grub-install
script from the GRUB port to install its boot loader on a FAT32 thumb
drive. The script aborts when it attempts something like "rm -f
/mnt/boot/grub/*stage1_5"
Carl
iveFS on the thumb drive?
Alternatively, since I'm using Grub as a multiboot manager, how would I
alter the FreeBSD boot configuration such that it boots the liveFS
directly instead of the primitive sysinstall-only boot option?
Carl
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
wonderful resolution, but it makes everything rather small, and the icons are
difficult to see. I am obviously setting something wrong, but I do not know
what it is. Might anyone have any suggestions. I really would rather have the
resolution be 1280x1024. Thanks for your help!
C
<[EMAIL PROTECTED]> wrote:
> Hi everybody,
> I'm getting problems to install the JavaNNS 1.1 in FreeBSD 4.9.
> I tried to install via ports and the package JavaNNS-LinuxIntel.tar.gz
> but with both i get the same error, that they could'nt find the
> libSNNS_jkr.so.
> It asks the path to put the li
ike trying one of the jdk14's, be sure to read the
port pkg-message and pkg-descr files before you decide.
<[EMAIL PROTECTED]> wrote:
>
> I'm using diablo-jre-1.3.1.0 from www.freebsdfoundation.org
>
> Carl Mascott wrote:
> >
> >Which JDK or JRE are you
sysinstall
is for anyone wanting to use a USB thumb drive as an install medium. In
fact, it's looking totally unusable.
Clearly sysinstall is utilizing 'mount' functionality for it's own
purposes. Surely there's some way for me to access it too
gate ST31000340AS Barracuda 7200.11, 1TB, SATA (x2).
- LG GH20NS10 Internal Super-Multi SecurDisc 20X SATA DVD Rewriter.
- Antec 4U22EPS650XR case (NeoPower 650W PSU).
Carl / K0802647
___
freebsd-questions@freebsd.o
I'm new to FreeBSD. Been experimenting with 8.0-RC1 and zfs in a VM.
Really haven't even installed it yet, just getting familiar with zfs
usage from the fixit environment. I experienced some strange behavior
and was wondering if this would warrant a bug report:
1. load zfs from bootloader prompt
Chris,
Don't know, but, I will paste in a portion of the ZFS admin guide from SUN:
Because these statistics are cumulative since boot, bandwidth might
appear low if the pool is
relatively idle. You can request a more accurate view of current
bandwidth usage by specifying
an interval. For example:
Thanks for testing it out krad. I went ahead and submitted the PR:
http://www.freebsd.org/cgi/query-pr.cgi?pr=139806
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
mented, it appears that most new ext3 filesystems default to 256
byte inodes. When I created a filesystem with 128 byte inodes then
FreeBSD could mount it just fine. I didn't try ext2, but I think the
inode is independent of ext2 or ext3. This is for FreeBSD
7.1-RELEASE, so maybe things hav
Ruben de Groot writes:
> On Sat, Nov 07, 2009 at 10:18:21PM -0800, Carl Johnson typed:
>> Frank Shute writes:
>>
>> > On Sat, Nov 07, 2009 at 05:35:58PM -0500, Jerry McAllister wrote:
>> >>
>> > [snip]
>> >>
>> >> No
w every hour, keeps it from getting
> behind too much. Perhaps that is what I'll end up doing, loading the
> ntp server, I guess that would keep it up to date better? Thanks.
If it is consistently off by a certain amount, then you might want to
look into /usr/sbin/ntptime to set a frequency o
ttp://spamcop.net/fom-serve/cache/297.html
with this reference: http://www.spamcop.net/w3m?action=blcheck&ip=";
$&{client_addr} ""')dnl
GENERICS_DOMAIN_FILE(`/etc/mail/generics-domains')dnl
define(`confMILTER_MACROS_HELO', confMILTER_MACROS_HELO`, {ver
t happens, and I have been running unix and linux for about 20
years. I have always had multiple partitions in the past, but for 9.0 I
went with the single partition.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
n noticed
your page and tried the PCnet-PCI II card and it started working. I
would guess that means their Intel card emulation is incomplete.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.fre
Warren Block writes:
> On Tue, 28 Feb 2012, Carl Johnson wrote:
>
>> Warren Block writes:
>>
>>> On Tue, 28 Feb 2012, Da Rock wrote:
>>>
>>>> I'm starting to believe this dog won't hunt (in fact is dead,
>>>> bloated, and ful
> I switched from i386 to amd64 last year so it might be something to do
> with that. I'm currently using 8.2p6.
The only way I have found to do it is [[:<:]] and [[:>:]]. That is very
awkward, so I't love to hear of a shorter way. I found them in the
re_format(7) manpage.
--
Fbsd8 writes:
> dmesg command does not show date of last boot.
>
> Are there some other commands to find date of last boot?
In addition to the other responses:
sysctl kern.boottime
--
Carl Johnsonca...@peak.org
___
freebsd-
How long are you waiting? What are you booting from?
On Sat, Feb 26, 2011 at 7:54 PM, Slawomir Wojtczak wrote:
> > Anything interesting happening during your install?
>
> I would say no, everything seems smooth until I try to boot it.
>
> ___
> freebs
sion if
> required to make this stuff run.
One addition to the points that others have made is that the Linux
compatibility layer appears to be 32 bits only, even for 64 bit versions
of FreeBSD. At least that is true for Release 8.1. If the software is
64 bit linux, then it won't
el: An incorrect partition c may cause problems for standard
> system utilities
> partition h: partition extends past end of unit
>
> I don't care about partition 'h'; it is there only to stop the
> preceding partition from covering the last sector. Are there any real
&
install gives me:
YAML::Syck is up to date (1.17)
I'm not really sure what else to check. Can someone point me in the
right direction?
Carl
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questi
2011/6/29 Warren Block
> On Wed, 29 Jun 2011, Dick Hoogendijk wrote:
>
> Op 29-6-2011 21:19, Trond Endrestøl schreef:
>>
>>> On Wed, 29 Jun 2011 21:18+0200, Dick Hoogendijk wrote:
>>>
>>> Op 29-6-2011 21:15, Trond Endrestøl schreef:
> On Wed, 29 Jun 2011 20:42+0200, Dick Hoogendijk wro
ect-Linux-FAQ/downloadwp8.html. Most of the
links are dead or changed, but a couple of them do have files to
download.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
eport which inode was using a
> particular block.
It looks like the best bet would be fsdb, assuming that it is a UFS
file system. That does have a 'findblk' command to find a file
containing a block, but you would need to calculate the
see 'em with
> "zfs list -t snapshot".
The .zfs directory is hidden by default so you have to specifically ls
or go into them. Do a 'ls' on the base directory of any zfs file
system, and then add .zfs to the end and you should see the .snapshots
directory.
--
C
Flags are explicitely mentioned here. Maybe you can give
> this program a try?
I think that tar will also work (but not gnu tar), and it is part of the
base system. The manpage does show an example of how to do this, but
calls it moving the file heirarchy.
--
Carl Johnson
x27;
and 'mix' settings in mixer(8). I also must have the 'igain' set to
something above 0, but the volume isn't directly controlled by it.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
h
partially updated. That will at least give you some idea about
the schedule.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send an
f the OP is going to run a 64-bit OS, then hardware vitualization
assist is *required* for VirtualBox to handle it. It is not required
when VirtualBox is running a 32-bit OS. Just another minor detail to
consider.
--
Carl Johnsonca...@peak.org
___
aying from audio.
My system uses a Gigabyte GA-MA785GPM-US2H, and the sndstat output is:
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm0: (play)
pcm1: (play/rec) default
pcm2: (play/rec)
pcm3: (play/rec)
Let me know if you want further information.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Carl Johnson writes:
> "Ronald F. Guilmette" writes:
>
>> I've been bringing up a new amd64 box with 8.2-RELEASE. So far I've managed
>> to get everything installed OK, including a boatload of freshly-built ports.
>> I've even gotten flash10 wo
't tried 9.0, but this works
on 8.1-RELEASE and 8.2-RELEASE. You can decide for yourself if that
does what you want.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinf
hat might have been just because I hadn't
been using enough colors. I put it in but there is no change for my
applications.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailm
Carl Johnson writes:
> Patrick Lamaiziere writes:
>
>> Hello,
>>
>> I use sysutils/most to have nice manual pages in color, that's cool but
>> is there a way to do this with the base system (ie without adding port)?
>
> I use a colorized termcap with les
tem requires that you already have the
'ufs2_stage1_5' file in your grub directory.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
C
dev.cpu.1.temperature: 29.2C
for your system?
I have an AMD cpu and the amdtemp kernel module provides that
information. I am not familiar with the Intel cpus, but the coretemp
module is supposed to provide the same information for them. I use
gkrellm for various thing,
x... It's all explained in
> crontab(5).
Just be aware that 'Run once, at startup', means when 'cron' starts, not
just when the system boots, unless they have changed it recently.
--
Carl Johnsonca...@peak.org
_
of that somewhere, so I grep'ed the man
pages. I found hints on geom(4) and boot0cfg(8), but they certainly
aren't obvious.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/m
authpriv
The sample file that was mentioned earlier is one source for
information, but the best source is the sudoers(5) man page. Just
search it for syslog and you will find several settings.
--
Carl Johnsonca...@peak.org
___
freebsd
such a hassle
I can't help directly with your problem, but both portupgrade and
portmaster support packages. In both cases you can just supply the -P
or -PP options to specify how to handle packages. I think they both
require that the ports tree be present for the /usr/ports/INDEX file,
but othe
mmands "with root
>> privileges".
>>
>
> "sudo su -" or "sudo sh" and the customer gets a native root shell which
> does *not* log commands !
The sudoers manpage mention the noexec option which is designed to help
with the first problem. They a
;kenv' command seems to have the board name available as
'smbios.system.product'. The 'kenv' command without arguments will show
all values, so you can make sure that is the proper variable.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
edu:/usr/obj/usr/src/sys/GENERIC i386
>
> push900# which kgzip
> /usr/sbin/kgzip
On my system:
$ uname -a
FreeBSD birch.localnet 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30
UTC 2012 r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
$ whereis kgzip
kgzip: /usr/src/u
g
>>kldload umodem
>>
>
> Done, although kldload u3g tells me that file already exists! Perhaps
> because I booted up with my Huawei dongle plugged in.
> kldstat | grep u3g shows me nothing though.
The command 'kldstat -v' shows tha
ing that FreeBSD doesn't allow using part of a disk,
but grabs the entire disk. That means that VirtualBox can't use
partitions on a disk that any other partitions are being used by
anything else, including FreeBSD itself. Am I wrong about this? I use
VirtualBox using vdmk f
Warren Block writes:
> On Mon, 11 Mar 2013, Carl Johnson wrote:
>
>> It is my understanding that FreeBSD doesn't allow using part of a disk,
>> but grabs the entire disk. That means that VirtualBox can't use
>> partitions on a disk that any other partitions
non-OS components. You can use
> it as a basis to build a program that will send you system messages
> in an audible way in morse code... :-)
Have you looked at the morse man page lately, specifically the -p
option? :-) Just try 'morse -p sos' to test it.
--
Carl Johnsonca..
l will handle these, so you definitely should
experiment first.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
4.2BSD0 0 0
t:2097055 398458884.2BSD0 0 0
I also tried newfs on all the ufs partitions without problems. I just
tried this on a FreeBSD 8.2 system and it works there as well.
--
Carl Johnsonca...@peak.org
_
e this does not work. Unless I hack the Makefile and force it to
> enable gui mode it just isn't compiled in.
Try running 'make show-options' and see what you get. Mine shows that
virtually everything is disabled. If I run 'make showconfig' then it
shows n
-> 0
>
> Got the sound working like it was.
> How do I get it to stick across reboots?
>
> Which would be the preferred way?
Since you can set it with sysctl then sysctl.conf is the logical place,
although loader.conf might also work. I use sysctl.conf so I know that
wo
J.D. Bronson wrote:
I know the bus will slow down with the tape drive attached, but will it
come back to normal speeds once I remove the tape drive? - and/or do I
have to run the camcontrol command again?
Run the rescan again.
Just removing the device from the bus does not cause the kernel or the
if the question is stupid. I just somehow couldn't
logically see where it would be stored, and yet be compatible
with having other OS on the same drive... etc.
Thanks!
- Carl
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/
4420C)
I'd say you are seeing the same as I am with the same card in a Dell
1855. There is something wrong with the mpt driver and the disks when
they are setup in a raid0 set. If you split the disks and use them as
individual drives then you will get full performan
Hello,
sorry if this has been discussed already, but I can't seem to find it:
has anyone had any luck getting the Linux version of Mathematica
*version 5* to work under FreeBSD emulation?
Thanks,
Carl
___
[EMAIL PROTECTED] mailing list
When starting cvsup I get the message connection refused when trying to FTP.
I think it takes the user id from my server and uses that ... and that's not
known at the download server ofcourse.
Where can I configure to use an anonymous userid or is there another way to
solve this.
Thanks,
paths in your exclude file, tar fails to match them.
Alternatively, if you want to keep the absolute paths, try tar with the -P
option. Your exclude list may work as is in that case. I haven't ever
tried that myself though. Just be careful when you untar if you do use that
switch.
Carl
On Thu
r alternatively, you still have
the problem and my patch would be useful to you. :-)
By the way, I'm running Freebsd 5.4 Release and I'm using
dvd+rw-tools 5.21.4.10.8 with an ATAPI DVD burner configured to be
/dev/cd1.
Thanks,
Carl
___
freebsd-ques
On Sat, Jul 30, 2005 at 03:54:25PM +0930, Greg 'groggy' Lehey wrote:
> On Friday, 29 July 2005 at 22:50:13 -0700, Carl Delsey wrote:
> > I'm wondering if anybody else has seen this problem, and if you've
> > found some other workaround for it? Or alternatively,
On Sat, Jul 30, 2005 at 02:16:17PM -0400, Chuck Swiger wrote:
> I'd be happy to review or test them first if you'd like, but any changes of
> this sort really ought to go upstream to Andy Polyakov
> <[EMAIL PROTECTED]> or to the cdwrite mailing list at
> .
Thanks. I've just emailed Andy about t
;-blank=full option.
> > >
> > >Marc
> > >
> > >
> > >
> > >
> > i cvsup'd to the latest and still the same thing, any ideas?
>
> Did you use "-blank=full" or "-blank"?
> Did you have th
On Tue, Aug 02, 2005 at 09:50:03AM +0930, Greg 'groggy' Lehey wrote:
> On Monday, 1 August 2005 at 22:31:45 +0200, Hanspeter Roth wrote:
> >
> > Hello,
> >
> > I'm trying to burn an iso image onto a DVD+RW.
> > I'm trying:
> >
> > growisofs -Z /dev/cd0=image.iso
>
> The version of growisofs that
On Tue, Aug 02, 2005 at 01:25:22AM -0400, Chuck Swiger wrote:
> Carl Delsey wrote:
> >
> >It's valid syntax ... just not documented in the man page. You have to
> >go out to the website to find out about it.
>
> Look just before the NOTES section of the manpage
On Thu, Aug 04, 2005 at 12:06:15AM +0200, Hanspeter Roth wrote:
> On Aug 01 at 22:31, Hanspeter Roth spoke:
>
> >
> > Hello,
> >
> > I'm trying to burn an iso image onto a DVD+RW.
> > I'm trying:
> >
> > growisofs -Z /dev/cd0=image.iso
> >
> > This yields:
> >
> > growisofs: no mkisofs op
match SUSv2 more closely.
Thank you!
- Carl
_
FREE pop-up blocking with the new MSN Toolbar get it now!
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
___
[EMAIL PROTECTED] ma
efault_unit=1) controls the back panel jacks, and
/dev/mixer2 controls the front panel headphone jack. You will probably
have to just experiment with the different mixer controls to see which
controls which on your system.
--
Carl Johnsonca...@peak.org
___
advice on the net with so far isn't working to start
>> it:
>> echo "startkde" > ~/.xinitrc
>> I have attempted startx but the system doesn't know about it.
>> may I have a suggestion to proceed?
Do you have
or doing backups but also still have internet access via the
server's bridge interface right?
Is there a reason I wouldn't want to do it this way?
Thanks,
Carl
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
tem finishes booting.
In /boot/loader.conf I've got:
zfs_load="YES"
vfs.root.mountfrom="zfs:zrootusb"
zrootusb mountpoint is set to legacy and /etc/fstab exists but is
empty, per the guide.
Any ideas?
Thanks,
Carl
___
freebsd-q
On Wed, Dec 1, 2010 at 12:07 AM, Carl Chave wrote:
> I followed a gpt/zfs on USB stick guide for putting a base 8.1-RELEASE
> amd64 onto a 4GB sandisk USB memory stick. All went fairly well and
> the system will boot but fails to mount the root file system and dumps
> me a the mount
e testing for flag support out of curiosity, and found
that only cp -p, bsdtar and dump support them. Cpio, afio, gnutar,
gnucp and pax do not support them. I also tested extended attributes
(used for ACLs?), and only bsdtar and dump worked for them. Those
results were for usf, and generally did
Posting the below for input. The bulk of this is from a guide that
Morgan Wesström posted to this list. Some of it is taken from the
root on ZFS wiki entries on freebsd.org. Some from a pjd post here:
http://blogs.freebsdish.org/pjd/2010/08/06/from-sysinstall-to-zfs-only-configuration/
And then
> echo -en "\n\nNow run these two commands to make the changes live, and
> reboot
> zfs set mountpoint=legacy $zpool/be/$nroot
> zpool set bootfs=$zpool/be/$nroot $zpool\n\n"
Thanks for the input krad. It would be nice to easily switch back and
forth but aren't you still stuck if everything bl
t/defaults/loader.conf
> -r--r--r-- 1 root wheel 19426 Aug 24 2008 /boot/defaults/loader.conf
>
> No, forget about that, also nonsense, looks to new...
How about /var/empty:
% ls -ldo /var/empty/
dr-xr-xr-x 2 root wheel schg 512 Jul 18 19:16 /var/empty/
It can be changed, but doesn&#x
Chip Camden writes:
> Quoth Carl Johnson on Thursday, 13 January 2011:
>> Polytropon writes:
>>
>> > On Thu, 13 Jan 2011 13:50:27 -0800, Chuck Swiger wrote:
>> >> On Jan 13, 2011, at 1:46 PM, Devin Teske wrote:
>> >> > This is nearly alw
> I'd suggest looking at the Btimes of top level directories
>
> stat -f "%SB %N" /*
Or how about just / as this ~15 minutes earlier than most of the
remaining top level directories
sodserve# stat -f "%SB %N" /*
Jan 9 04:54:21 2011 /COPYRIGHT
Jan 9 04:54:21 2011 /bin
Jan 9 04:54:21 2011 /boot
but others not. The newsyslog.conf(5)
manpage mentions a 'C' flag that can be specified.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To u
1 - 100 of 203 matches
Mail list logo
