Hello
I would recommend creating a Fat 32 partion for transferring files between
FreeBSD and XP. This will work as long as you have not used all (four per
drive) of your primary partions.
> but when the instalation begun, I realized it couldn´t read mu NTFS drives
> so I thought the instalation
am on the right
track or there better tools for creating this configurations.
Thank you for your time
Aaron Siegel
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
Hello
After years of watching the Kolab/kgroupware project I have finally decide to
give it a try. Unfortunately Kolab is distributed using Openpkg the reason I
have put off installing the server. I do not want to use two different
package management systems on my computer especially if one of
Hello
I am have problems getting php4 to work with apache2. I have these working on
another FreeBSD 4.10 server but I can not get it working on my 5.3 server.
When I try to load a php page with my web browser it just ask me if I want to
download the php file.
Here is what I have done to confi
Hello
I am have problems getting php4 to work with apache2. I have these working on
another FreeBSD 4.10 server but I can not get it working on my 5.3 server.
When I try to load a php page with my web browser it just ask me if I want to
download the php file.
Here is what I have done to confi
I have recently performed that exact operation, I had a lot of trouble with
filenames. Created a common shared folder using samba and AppleTalk using
netatalk. I did not spend much time configure the share. I was pushed for
time and a little lazy.
On Wednesday 16 March 2005 07:09, Tim Simmons
ths since I
have done this)
#kldload snd_driver
This will test all the snd drivers.
3. You will now need to configure your /boot/loader.conf so that the driver
will load every time you reboot your computer. Add the following lines to
your /boot/loader.conf
sound_load="YES&quo
/loader.conf are not
edited in the upgrade process so you will maintain all your configurations.
You must create the /boot/loader file and add the appropriate lines to that
file.
In summary, do not make changes to the files in the defaults
directory, /boot/defaults and /etc/defaults.
Aaron
Hello
I would like to redirect all the local traffic to my public IP address to a
private IP. My local ISP require that their customers use their very cheap
(disfunctional) modem which will not direct any request from the LAN to the
public IP of the modem. So when I type http:// in my web bro
Hello
I need to convert the some Macintosh files to a Unix/Windows format. Has any
one been able to install MacPerl, Mac::Files, or Mac::MoreFiles on their
FreeBSD system? Can you recommend another solutions for converting Macintosh
files? I have look at Macutils but it did not work.
Thank
the MacPerl
module.
On Thursday 27 January 2005 14:18, Chad Leigh -- Shire.Net LLC wrote:
> On Jan 27, 2005, at 12:32 PM, Aaron Siegel wrote:
> > Hello
> >
> > I need to convert the some Macintosh files to a Unix/Windows format.
> > Has any
> > one been able to in
Hello
I have been trying to install the cyrus-imapd22 port without but I keep
receiving the same error.
/usr/bin/install -c -o root -g wheel -s -m 755 notifyd /usr/local/cyrus/bin
/usr/local/lib/perl5/5.8.2/man/man3/Cyrus::IMAP.3: No such file or directory
*** Error code 1
I have searched the p
I not sure were pkg_add -r downloads the packages.
I have couple recommendations:
1. buy a full box set or download all four installation cd images.
2. install sysutils/portupgrade. This will automate the download off all
packages. You can install the binary version and its dependent packages
FreeBSD is a controlled complete through a console ( command line) interface,
I do not believe watching someone typing in commands a the prompt or text
editor will be very helpful. It is completely different then the graphical
interface of Windows which require the user to navigate the maze of
Hello
This message is off topic but I was not sure were else I can go to get help
with my problem. For the past week I have been receiving messages from
various mail servers which have bounced messages I have not sent but have my
email address as the originator of the bounced message. I believ
Hello
One option I have seen for creating your own restore is to create a script
that will move files you want to delete to a temporary directory, a "Trash
Bin". Then use your shells aliases to alias the script to the rm command.
On Thursday 21 July 2005 1:07 am, Xu Qiang wrote:
> Hi, all:
>
>
the custom firewall couple years
ago and they work fine under 4.11 but after the upgrade I have not been able
to get them to work.
I sure I am doing something stupid but I am not smart enough to solve it at
the moment.
Thank you
Aaron Siegel
Custom firewall rules
#Allow DNS
$cmd 019 allow
Hello
I am syncing my T5 with kpilot through the usb cable. It is a bit tricky but
it does work. To get the sync to work enter the kpilot in to a shell, press
the hotsync button then execute the kpilot. It takes a few tries to get the
timing down it has been working for me.
Aaron
On Tuesday 1
Hello
I am in the process of setup a similar configuration using poptop to create a
pptp link between a static server and a roaming computer with an anonymous.
There is also l2tpd from what I read it is more secure than pptp but it does
not work through a NAT. I will hopefully get this up and
.
http://www.sigsegv.cx/FreeBSD-WIN2K-IPSEC-HOWTO.html
I will take a look at mpd
Thank you
On Friday 27 August 2004 08:40 am, you wrote:
> On Fri, Aug 27, 2004 at 08:28:58AM -0600, Aaron Siegel wrote:
> > Hello
> > I am in the process of setup a similar configuration using poptop to
&g
Hello
I am stumped I am try to get a very simple IPSEC tunnel between my laptops and
gateway. I can not seem to get the IKE to authenticate. I have had this
working in with my other server which has been moved to a new location. I
have a FreeBSD 4.10 Stable server and an 5.2.1 Release. I am a
wfish, des, rijndael ;
authentication_algorithm hmac_sha1, hmac_md5 ;
compression_algorithm deflate ;
}
psk.txt
192.168.245.12 Shared Key
Sorry for the premature post.
Aaron
On Friday 27 August 2004 06:19 pm, Aaron Siegel wrote:
> Hello
>
> I am stumped I am try to get a very simple IPSEC tu
Hello
A simple solution, just to get things working, is to us one hard drive at a
time. Set up both drives a the master IDE device and swap between operating
systems by swapping the cable between the two drives. If you want to run
FreeBSD plug in the 40GB drive and unplug the 80GB. The reverse
I really believe the choose would depend on your requirements and your
experience. If you are new to open source Unix-like environment then you
should not use either in version in a production environment unless you can
afford the cost associated with learning a new system. Do not under estimate
I would recommend setting up dual boot system with FreeBSD and Linux see which
system you like best or suites your needs the best. Get your feet wet first,
jump in when you feel comfortable. There are a couple ways of creating such a
system, buy a new hard drive or crate a partition on you curre
Gimp.
On Wednesday 06 October 2004 12:21, stan wrote:
> I just got my first set of pictures on CD's (vacation pics), and I wan't to
> put them up on my web server.
>
> What's a good tool to do some really lightweight editeing on them with?
> Mostly I just need to rotate the vertical ones, but
Hello
The xterms can be sized using .Xdefaults in your home directory. Read the man
page for xterm. This should, but not always, set the size of your xterm
independent of the window manger you are running, KDE, Gnome, FVWM,.
On Thursday 07 October 2004 01:36, Gary Kline wrote:
> To the
Hello
On Saturday 09 October 2004 03:50, Bill Schmitt (SW) wrote:
> I installed XFree86 using "pkg_add -r XFree86" and it took a
> little longer than when I had installed if from sysinstall, but it
> didn't seem like a lot. Then I executed "pkg_add -r gnome2"
I have not had much luck insta
Hello
I was able to get older linux binaries to work by install the following
rpms from the Red Hat 6.1 distribution:
ld.so-1.9.5-13.i386.rpm
libc-5.3.12-31.i386.rpm
I did this by:
# /usr/compat/linux/bin/bash
# rpm -ivh ld.so-1.9.5-13.i386.rpm
# rpm -ivh libc-5.3.12-31.i386.rpm
Then you will n
If you can not install via rpm you can do it manually this is a safer
method. I use Midnight Commander (misc/mc) and select the rpm and copy
to the location. (I do not remember if I used rpm or the manual method)
sorry for the confusion
On Sun, 2002-10-27 at 11:22, Aaron Siegel wrote:
> He
Hello
I am trying to record audio input to a raw audio file using the comand:
$ cat /dev/dspW > audio.file.raw
This produces and error "cannot open /dev/dsp [device busy]" (using dsp,
dsp0.0). I tried the command fstat | dsp (as recommended in the hand
book), it did not find any applicati
Hello
Cannot
read or play audio cdrom disks.
run the Windows install for Win4BSD the install worked worked with a standard
cdrom drive
Can
burn CD-R (with cdrecord dev=1,0,0)
burn DVD-RW (with mkisofs)
play Movie dvds.
read dvd disks
read data cdrom disks
I am using 6.1 Release.
/boot/loade
xmms to see if
that works and also try a commandline application to play a cd.
Thank you
Aaron
On Sunday 04 March 2007 10:40 am, Garrett Cooper wrote:
> Garrett Cooper wrote:
> > Aaron Siegel wrote:
> >> Hello
> >>
> >> Cannot
> >> read or play a
Hello
I figured my problem with playing back audio cd's. Amarok need to
use /dev/acd0 not /dev/cd0
thank you
aaron
On Sunday 04 March 2007 11:52 am, Aaron Siegel wrote:
> Hello
>
> I am using various kde applications, Amarok, kaudiocreator, kaffeine... KDE
> appears to be th
What is not working? Are you receiving an error? If you are receiving an error
post that error. Are booting to console and start X with startx? Is your LCD
monitor giving you an out of range error?
On Saturday 03 March 2007 8:50 pm, Warwick Sweetnam wrote:
> Hi, I am having trouble getting X w
Hello
I am unable to burn cd with my new Sony DVD-RW. I have been fighting with this
for month. Sorry for have to post this message for such a basic task, Bellow
is the error message that is produced by cdrecord
Thank you
Aaron
<[EMAIL PROTECTED]># cdrecord -scanbus
Cdrecord-Clone 2.01 (i386-
Hello
I am looking for a pci wireless card for my Freebsd router. According to the
hardware notes for 6.2 "The ath(4) driver supports all Atheros Cardbus or
PCI cards, except those that are based on the AR5005VL chipset."
Does the ath driver support include AR5005GS or AR5006XS? It appears th
On Sunday 18 September 2005 10:08 am, Dick Hoogendijk wrote:
> On 18 Sep Roland Smith wrote:
> > On Sun, Sep 18, 2005 at 01:36:14PM +0200, dick hoogendijk wrote:
> > > What is the best way to let the winxp machine communicate with the
> > > mac/osx? And what about the fbsd machine. Is there a proto
Jay
Read
http://www.freebsd.org/doc/handbook/install-steps.html
I think I understand your question. Sysinstall's label editor does not obtain
the labels from an existing installation, you have to relabel the all of the
partitions everytime you run sysinstall. When I perform an upgrade using
Hello
I am having problems with my gateway after upgrading from 4.11 to 5.4. The
firewall rules that worked in 4.11 are not working in 5.4. A am able to
access the internet from the gateway but not its clients. The only ruleset I
can get to work is the "open" ruleset that is supplied with the
Hello
I would like to build a computer using a Intel Duo 2 Core processor, my first
attempted at finding a compatible motherboard failed. I do not remember
having the same difficulties six years ago when I built my last computer.
Does any one have any advice. I have looked at the hardware not
Berkely db is in the ports collection databases/db[2-4,41] and is free.
On Monday 21 July 2003 05:30 am, Martin McCormick wrote:
> I started to install spamprobe-0.8b and discovered that it
> needs something called BerkeleyDB. The instructions tell one to get
> it from a place called sleep
Hello
After working at a terminal for awhile (long enough that the scroll bar
becomes really small), xterm and rxvt (I am not sure if it problem occurs at
the council) begins to act strangely, I cannot su another user and when I try
to use a program that uses standard input (cin) the program
On Sunday 27 July 2003 10:26 pm, Rommel B. Ikeda wrote:
> Dear Friends,
>
> I do not know if this is the right place to ask but since I am a Newbie I
> thought I should start looking for answers here and maybe move on to
> wherever you might be able to guide me...
>
> I am trying to configure my sy
ed, 10 packets received, 9% packet loss
round-trip min/avg/max/stddev = 168.518/173.873/185.511/4.737 ms
If you do not receive this response you have a network problem.
Reply to this email address [EMAIL PROTECTED]
Good luck
On Tuesday 29 July 2003 01:23 am, Rommel B. Ikeda wrote:
> Dear Aar
Hello
Have you tried to using the XF86Config file from your Linux computer? You
will need to disable the dri stuff, make sure all the font paths are the
same.
On Sunday 27 July 2003 08:39 pm, Karl Agee wrote:
> >Date: Sun, 27 Jul 2003 19:15:57 -0700
> >To: "Greg 'groggy' Lehey" <[EMAIL PROTEC
Hello
I am currently helping a fellow user, Rommel B. Ikeda [EMAIL PROTECTED] He
is have problems getting is computer to connect to the internet through a
Window 2000 proxy server. I only have experience with NAT. I do not expect
someone to solve our problem just point me to the correct docu
Hello Robert
I have been using FreeBSD 5.1 RELEASE and Konqueror without any noticeable
problems with speed or name resolution. The problem I have are related to
browser issue: not haveing support for shockwave, scripting problems, and
poorly develop sites that do not work well with the KHTM
Hello
The handbook does a good job cover this topic, please take a look at it
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html
On Thursday 31 July 2003 06:25 am, marlon corleone wrote:
> how do i burn a directory using burncd
>
> i did burncd -f /dev/acd1 data mp3z fix
Hello
All you need to add support for you sound card is pcm remove the "device opl0
at isa? port 0x388" and try compiling the kernel.
On Wednesday 13 August 2003 07:29 pm, David wrote:
> I tried adding a driver for my onboard-soundcard Yamaha OPL-3-SAx on
> P200mmx, FreeBSD 4.7-Release.
>
> Afte
>
> >On a larger scale can i am tired of constantly changing dirs to run
> >apps. can i adjust an environment variable to run programs from any
> >dir i am in, instead searching through everything. I installed a lot
> >of port software but can't seem to be able to run or find any of it.
>
> thats
Hello
If you have a connection to the internet you can install FreeBSD by
retrieving the distribution through ftp interface.
If you can find a solution on this mailing try posting to
[EMAIL PROTECTED]
Good Luck
On Thursday 14 August 2003 07:43 pm, zteknofreak wrote:
> i've been tryin
Hello
I cannot get ipfilter to load any rules. When I type in the iptest command I
receive the following output:
<[EMAIL PROTECTED]># ipftest
no rules loaded
I used the example found in the /usr/share/examples directory I am unable to
load the firewall. I have tried to load the file though
# ip
53 matches
Mail list logo
