On Mon, 14 May 2012 20:45:51 -0400, Thomas Mueller wrote:
> I guess after the first installkernel, to default location,
> I should immediately make installkernel again, this time with
> DESTDIR=/mnt?
That should be possible, you only have to make sure that both
"install targets" are fine with the
On Tue, 15 May 2012 11:11:44 +0200, Bernt Hansson wrote:
> Hello list
>
> After a reinstall of winxp, yes I know but the games.
You like playing with obsoleted OS imitations, that's okay. :-)
> I have a fat32 slice/partition/postcard whatever it's called.
It should be called a slice, because
On Fri, May 11, 2012 at 12:04 AM, Juan Francisco Cantero Hurtado
wrote:
>
> Dfly doesn't support Xen. Some providers support HVM (not Amazon) and
> you can give a try to dfly in this environment. I don't know if dfly
> works on Xen HVM or not. Probably the performance will be poor.
>
Actually Fre
After a reinstall of winxp, yes I know but the games.
I have a fat32 slice/partition/postcard whatever it's called.
Mocking me with:
testbox# fsck -y -t msdosfs /dev/ad4
** /dev/ad4
Invalid signature in fsinfo block
Fix? yes
fsck: /dev/ad4: Floating point exception: 8
testbox#
why ad4 not ad
thanks for help. found it non-FreeBSD specific. just this model is not
supported by available software.
Thanks again
On Mon, 14 May 2012, Robert Huff wrote:
Wojciech Puchar writes:
> /usr/ports/sysutils/apcupsd ?
? - so what to give as device? /dev/ugen1.3?
set
UPSCABLE usb
UPSTYPE us
I am not sure how that plays in it. I am definitely not a make hacker.
Anyway, is there a good tinker to get past this
or do I have to wait until something gets updated in the port?
8.2 version should work just fine as 8.3 version.
Some simple fixing of makefiles/other files or even symlinks
i would rather look at software that uses "tun" interfaces instead of
FreeBSD which seems to support more than 128 tuns out of the box:
this:
# x=1;while [ $x -lt 2000 ];do ifconfig tun$x create;x=$[x+1];done
worked fine. ifconfig shows 2000 tun interfaces
# x=1;while [ $x -lt 2000 ];do ifc
On Mon, May 14, 2012 at 3:09 AM, Brett Glass wrote:
> I'm running a busy FreeBSD-based that may handle large numbers of
> simultaneous connections. I'm currently using software that creates a "tun"
> device for each connection. However, after it hits tun127 (128
> pseudo-devices), it doesn't seem
Hi,
I'm having some system crashes from time to time. I had this before
but until recently I couldn't set my system so I could get crash
dumps.
My video card is a ATI Mobility Radeon 9700. I'm running FreeBSD
9.0-RELEASE for amd64. These are excerpts from two crash dumps text
files:
core.txt.3:
--
**Umbreen**
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Hello,
I was wondering if you would be able to help me locate a copy of the below
article:
"General Commands Manual for RDIST"
June 3, 1993
FreeBSD
I appreciate any help you are able to provide.
Best regards,
--
Lauren Scott
*Research Analyst*
___
fr
On 15/05/2012 21:33, Lauren Scott wrote:
> I was wondering if you would be able to help me locate a copy of the below
> article:
>
> "General Commands Manual for RDIST"
> June 3, 1993
> FreeBSD
>
> I appreciate any help you are able to provide.
Tricky. The CVS Repo only goes back to 1994, and I
On Tue, 15 May 2012 12:33:15 -0700, Lauren Scott wrote:
> Hello,
>
> I was wondering if you would be able to help me locate a copy of the below
> article:
>
> "General Commands Manual for RDIST"
> June 3, 1993
> FreeBSD
>
> I appreciate any help you are able to provide.
Are you sure about the d
On Sun, 13 May 2012, Colin Barnabas wrote:
Has anyone been able to get the Arduino Uno board working with
avrdude? I keep getting programmer not responding errors.
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
This is the command I'm us
On Tue, 15 May 2012, Polytropon wrote:
On Tue, 15 May 2012 12:33:15 -0700, Lauren Scott wrote:
Hello,
I was wondering if you would be able to help me locate a copy of the below
article:
"General Commands Manual for RDIST"
June 3, 1993
FreeBSD
I appreciate any help you are able to provide.
-
>
> Message: 8
> Date: Mon, 14 May 2012 19:14:42 +0200
> From: "Christopher J. Ruwe"
> Subject: Re: dlink dwl-122g e1 on 9-stable, working only partially?
> (or not at all?)
> To: freebsd-questions@freebsd.org
> Message-ID: <20120514191442.505a0...@dijkstra.cru
Are you having trouble viewing this e-mail? [1]Click here to view it
from our website.
To ensure that you continue receiving emails from us, please add
[2]santacruzbiotechnol...@scbt.com to your e-mail address book.
[3][USEMAP:20120514_fly_email.jpg]
Copyrig
>From Bernt Hansson :
> After a reinstall of winxp, yes I know but the games.
> I have a fat32 slice/partition/postcard whatever it's called.
> Mocking me with:
> testbox# fsck -y -t msdosfs /dev/ad4
> ** /dev/ad4
> Invalid signature in fsinfo block
> Fix? yes
> fsck: /dev/ad4: Floating point e
Colleagues,
Do you have success stories running FreeBSD on an ASUS P8H67-M LGA1155
H67 motherboard? This will be mostly a desktop system on 9.0-RELEASE.
I am worried especially about the Sandy Bridge video, shall I be able
to use it with xorg at least in VESA modes?
Do also the sound/NIC/etc dri
Sorry for OT it is funny that such cheat-companies are so common in
Poland, advertise a lot not even understanding what they are talking
about.
The funny part is that potential clients believe in this trash instead of
simply use google and type "webpage promotion", "google rank" etc..
et
Hi,
Trying to execute IPv6 Ready Logo Phase-2 Interoperability Test Scenario Ipsec
test cases 5.2.11
Issue:-
FreeBSD 7.4 not sending icmpv6 too big message
Please check the updated setup & pcap.
Regards,
Rohit
___
freebsd-questions@freebsd.org mail
Hi,
Following interoperability is failing:-
IPv6 Ready Logo, Phase-2 Interoperability Test Scenario Ipsec -Test cases
5.2.12 is failing with FreeBSD.
Observation:-Freebsd 7.4 uses HMAC-SHA-256-96 Algorithm and SGW1 are using
HMAC-SHA-256-128 Algorithm due to this interoperability is failing.
Did
Hi,
Following interoperability is failing:-
IPv6 Ready Logo, Phase-2 Interoperability Test Scenario Ipsec -Test cases
5.2.12 is failing with FreeBSD.
Observation:-Freebsd 7.4 uses HMAC-SHA-256-96 Algorithm and SGW1 are using
HMAC-SHA-256-128 Algorithm due to this interoperability is failing.
Did
Hello,
I found a couple of threads on the web about this but no solution.
Am I the only one of few people who needs to run PHP scripts on FreeBSD machine
that were encoded with Zend Guard technology? trying to run linux version of
PHP, which has a ZendGuard loader made for it, or worse linux vers
Am I the only one of few people who needs to run PHP scripts on FreeBSD machine
that were encoded with Zend Guard technology? trying to run linux version of
probably not, no idea EXACTLY what zend guard is but i've seen other such
standards of encoding==obfuscating PHP sources. I don't provide
On 16/05/2012 07:53, Agarwal Rohit-B39617 wrote:
> Trying to execute IPv6 Ready Logo Phase-2 Interoperability Test Scenario
> Ipsec test cases 5.2.11
>
> Issue:-
> FreeBSD 7.4 not sending icmpv6 too big message
> Please check the updated setup & pcap.
Your attachments aren't making it through
I need a sort of file permission template.
Under some particular directory (like ~/secret), I need all those
files (including newly creating one) mode 700.
Is there any template-trick? Or "chmod -R 700" every time?
umask when creating files there.
___
Thanks. But I need specific directory only.
umask way seems to set mode not only under ~/secret but other
directories like ~/public.
Is there any elegant way?
elegant way is just to chmod 700 ~/secret and do not do anything more, as
files under ~/secret are already inaccessible too for others
28 matches
Mail list logo
