El día Monday, August 23, 2010 a las 02:31:08PM +0300, Manolis Kiagias escribió:
> > Once having setup VMware (workstation), I plan to boot from FreeBSD live
> > CD, create the slices big enough and fill in the dumps of my current
> > system. Any objectives with this? Thx
> >
> > matthias
> >
What is the best choice for a file system that can be read, and safely written
to, by Linux, NetBSD and FreeBSD?
With NetBSD through 5.1_RC3, I got "unsupported inode size" when trying to
mount Linux ext2fs partition from NetBSD.
With FreeBSD through 7.2, I could mount, but got "Bad file descr
Hi,
"Penning Classics and garnering praise from Bono, Peter Gabriel & Oasis" THE
GUARDIAN
"Songwriting from the top drawer" TIME OUT.
"Imagine McCartney's craftsmanship and Springsteen's power and you'll get the
gist" Q MAGAZINE
As it seems I am only really know by famous novelists and rock
On 24/08/2010 11:42 π.μ., Matthias Apitz wrote:
> El día Monday, August 23, 2010 a las 02:31:08PM +0300, Manolis Kiagias
> escribió:
>
>
>>> Once having setup VMware (workstation), I plan to boot from FreeBSD live
>>> CD, create the slices big enough and fill in the dumps of my current
>>> syst
the problem is not which version of mkfs (ext2fs) you use.
the problem is that BSD only handle ext2fs partitions with 128b inodes,
while default value is 256.
when running mkfs/newfs, be sure to specify -I 128
also, I won't recommand ntfs.
but, ntfs "works" correctly under BSD and Linux.
so, if yo
On Tue, 24 Aug 2010 09:53:09 +, "Thomas Mueller"
wrote:
> There is the obvious possibility of using msdos (FAT32); I could
> run FreeDOS on such a partition as well as using the partition to
> share data between Linux, NetBSD and FreeBSD, and FreeDOS too.
> Drawback is some problems getting
Hi,
Sorry for posting on a bsd list but i figure there's more than a few
sendmail experts here.
I would like to run reverse dns checks on one of my boxes but the
check_rnds macro looks a bit overkill to me.
I want to reject the mail if there's no reverse dns, but not if there is
rdns but
> -Original Message-
> From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-
> questi...@freebsd.org] On Behalf Of Polytropon
> Sent: 24. august 2010 12:55
> To: Thomas Mueller
> Cc: freebsd-questions@freebsd.org
> Subject: Re: Lingua franca file system Linux-NetBSD-FreeBSD?
>
Trying to update ghostscript, but seems to fail. Can somebody provide me with
info on how to solve this?
Here error during build of port
..
cc -DHAVE_MKSTEMP -DHAVE_HYPOT -DHAVE_FONTCONFIG -O2 -fno-strict-aliasing
-pipe -fPIC -DUPD_SIGNAL=0 -I.
-I/usr/ports/print/ghostscript8/work/gho
Hi,
On Monday 23 August 2010 15:01:22 Mubeesh ali wrote:
> Hi,
>
> In my case(stuck at bios splash after freebsd install) ,i had to give it to
> acer support ,as i risked losing warranty if i opened/dismantled my laptop.
> They have diagnosed harddrive to be faulty(the laptop is hardly 15 days o
Anyone using msmtp as an smtp client? I have Comcast as an ISP and am
unable to achieve authentication. The weird thing is that I saved my
.msmtprc file from a previous installation where it worked just fine.
___
freebsd-questions@freebsd.org mailin
Is there any molecular modeling software in ports?
Regards,
Chris Maness
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.or
Maybe /usr/ports/biology/pymol is what you need
On Tue, 24 Aug 2010 08:22:57 -0700
Chris Maness wrote:
> Is there any molecular modeling software in ports?
>
> Regards,
> Chris Maness
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.
On Tue, Aug 24, 2010 at 8:27 AM, Rodrigo Gonzalez
wrote:
> Maybe /usr/ports/biology/pymol is what you need
>
> On Tue, 24 Aug 2010 08:22:57 -0700
> Chris Maness wrote:
>
>> Is there any molecular modeling software in ports?
>>
>> Regards,
>> Chris Maness
>>
Yea, I see that one there plus tinker
On Tue, 24 Aug 2010 08:09:04 -0400, Christer Solstrand Johannessen
wrote:
> If there are no Windows clients involved, I'd use NFS or AFS;
Yes, I forgot to mention NFS. Of course it works, as the support
for it in UNIX, Linux, BSD and Mac OS X is sufficiently good. But
it may not be a solution i
I have commented out the lines that load kernel modules for
virtualbox, and made sure they were gone with kldstat. However I am
still getting VERY infrequent spontaneous reboots. So it is not the
modules. I am thinking hardware. It has a temperature alarm that
sounds when it is hot, but since I
On Tue, Aug 24, 2010 at 7:29 PM, Chris Maness wrote:
> I have commented out the lines that load kernel modules for
> virtualbox, and made sure they were gone with kldstat. However I am
> still getting VERY infrequent spontaneous reboots. So it is not the
> modules. I am thinking hardware. It has a
On Tue, Aug 24, 2010 at 06:29:31PM +0200, Polytropon wrote:
> On Tue, 24 Aug 2010 08:09:04 -0400, Christer Solstrand Johannessen
> wrote:
> > If there are no Windows clients involved, I'd use NFS or AFS;
>
> Yes, I forgot to mention NFS. Of course it works, as the support
> for it in UNIX, Lin
Why does Opera 10.61.6430 want to read kernel memory (on FreeBSD
8[.0]-STABLE/i386), leading to eventual death ...
opera [crash logging]: Can't read kernel memory: : /dev/mem: Permission denied
opera [crash logging]: CRASH!!
got signal SIGSEGV at address 0819DEA6
... while shutting down n
On 8/24/2010 4:53 AM, Thomas Mueller wrote:
What is the best choice for a file system that can be read, and safely written
to, by Linux, NetBSD and FreeBSD?
With NetBSD through 5.1_RC3, I got "unsupported inode size" when trying to
mount Linux ext2fs partition from NetBSD.
With FreeBSD throug
Hi experts,
We use NFS to store /home directory for users in our lab.
However, we occasionally get blocked from logging in because
the automount daemon on a NFS client machine hangs. When
that happens, we get this error message on the NFS client machine
called "bucks" in its system logs:
Aug 24 1
In response to Lucas Wang :
>
> We use NFS to store /home directory for users in our lab.
> However, we occasionally get blocked from logging in because
> the automount daemon on a NFS client machine hangs. When
> that happens, we get this error message on the NFS client machine
> called "bucks"
> From owner-freebsd-questi...@freebsd.org Tue Aug 24 12:29:16 2010
> Date: Tue, 24 Aug 2010 10:29:27 -0700
> From: Chris Maness
> To: freebsd-questions@freebsd.org
> Subject: Spontaneous Reboots (I thought it was Virtualbox Kernel Modules)
>
> I have commented out the lines that load kernel modu
On Tue, Aug 24, 2010 at 12:47 PM, Robert Bonomi
wrote:
>> From owner-freebsd-questi...@freebsd.org Tue Aug 24 12:29:16 2010
>> Date: Tue, 24 Aug 2010 10:29:27 -0700
>> From: Chris Maness
>> To: freebsd-questions@freebsd.org
>> Subject: Spontaneous Reboots (I thought it was Virtualbox Kernel Modu
On 24/08/2010 10:58 μ.μ., Chris Maness wrote:
> On Tue, Aug 24, 2010 at 12:47 PM, Robert Bonomi
> wrote:
>
>>> From owner-freebsd-questi...@freebsd.org Tue Aug 24 12:29:16 2010
>>> Date: Tue, 24 Aug 2010 10:29:27 -0700
>>> From: Chris Maness
>>> To: freebsd-questions@freebsd.org
>>> Subject:
When I looked at the regular level kernel log, it seemed to be out
of
the clear blue.
I've seen once behaviour like this on FreeBSD and it was caused by
faulty ECC memory comb. Incorrectable CRC error just caused a
diagnosis beep sequence and then machine shut down immediately after.
-Reko
I'm using CUPS on FreeBSD 8.0, and any time I try to print from outside
Firefox the top and bottom of a PDF gets cut off. I don't have any means
installed for printing a PDF from inside Firefox, but Webpages and the
CUPS test page print just fine from within the browser. For instance:
/usr/l
On Tue, Aug 24, 2010 at 10:29:27AM -0700, Chris Maness wrote:
>
> I have commented out the lines that load kernel modules for
> virtualbox, and made sure they were gone with kldstat. However I am
> still getting VERY infrequent spontaneous reboots. So it is not the
> modules. I am thinking hardw
Quoth Chad Perrin on Tuesday, 24 August 2010:
> I'm using CUPS on FreeBSD 8.0, and any time I try to print from outside
> Firefox the top and bottom of a PDF gets cut off. I don't have any means
> installed for printing a PDF from inside Firefox, but Webpages and the
> CUPS test page print just fi
I was thinking that, maybe, it's the PSU itself. Does the fan work? Do you
have the ability to get temperatures inside your computer? Get those to poll
every minute or so and write to a flat file?
--
Ryan
On Aug 24, 2010, at 4:02 PM, Frank Shute wrote:
> On Tue, Aug 24, 2010 at 10:29:27AM -07
On Tue, Aug 24, 2010 at 02:04:32PM -0700, Chip Camden wrote:
>
> I'm not seeing that here, but I don't have a PDF that prints data in the
> margins. If you have one, can you email it to me?
I don't think it prints to the margins, per se.
I also know that it's not particular to the printer, sinc
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 08/24/10 10:29, Chris Maness wrote:
> I have commented out the lines that load kernel modules for
> virtualbox, and made sure they were gone with kldstat. However I am
> still getting VERY infrequent spontaneous reboots. So it is not the
> modules
Quoth Chad Perrin on Tuesday, 24 August 2010:
> On Tue, Aug 24, 2010 at 02:04:32PM -0700, Chip Camden wrote:
> >
> > I'm not seeing that here, but I don't have a PDF that prints data in the
> > margins. If you have one, can you email it to me?
>
> I don't think it prints to the margins, per se.
On Tue, 24 Aug 2010, Chad Perrin wrote:
I'm using CUPS on FreeBSD 8.0, and any time I try to print from outside
Firefox the top and bottom of a PDF gets cut off. I don't have any means
installed for printing a PDF from inside Firefox, but Webpages and the
CUPS test page print just fine from wit
On Tue, 24 Aug 2010 09:53:09 +
"Thomas Mueller" wrote:
> What is the best choice for a file system that can be read, and
> safely written to, by Linux, NetBSD and FreeBSD?
I've not tried it recently, but I think UFS (both UFS1 and UFS2 seem to
be supported) should work well; since 2.6.29 Lin
On Tue, Aug 24, 2010 at 03:49:24PM -0600, Warren Block wrote:
>
> The LJ4050 is a great printer, but it doesn't print PDFs natively.
>
> So you need to find what CUPS is using to convert PDFs to PostScript and
> adjust that. It may be an A4 to letter conversion, or it's trying to
> "intelligen
On Tue, 24 Aug 2010, Chad Perrin wrote:
On Tue, Aug 24, 2010 at 03:49:24PM -0600, Warren Block wrote:
The LJ4050 is a great printer, but it doesn't print PDFs natively.
So you need to find what CUPS is using to convert PDFs to PostScript and
adjust that. It may be an A4 to letter conversion,
On 24 August 2010 06:53, Thomas Mueller wrote:
> What is the best choice for a file system that can be read, and safely
> written to, by Linux, NetBSD and FreeBSD?
I've been trying NTFS(-3g). It's been going well, with even occasional
Windows thrown in the mix. But it is very slow, mostly, I bel
On 24 August 2010 20:48, Gustavo De Nardin wrote:
> On 24 August 2010 06:53, Thomas Mueller wrote:
>> What is the best choice for a file system that can be read, and safely
>> written to, by Linux, NetBSD and FreeBSD?
>
> I've been trying NTFS(-3g). It's been going well, with even occasional
> W
Quoth Warren Block on Tuesday, 24 August 2010:
> On Tue, 24 Aug 2010, Chad Perrin wrote:
>
> >On Tue, Aug 24, 2010 at 03:49:24PM -0600, Warren Block wrote:
> >>
> >>The LJ4050 is a great printer, but it doesn't print PDFs natively.
> >>
> >>So you need to find what CUPS is using to convert PDFs to
On Tue, 24 Aug 2010, Chip Camden wrote:
Quoth Warren Block on Tuesday, 24 August 2010:
As Chip Camden noted, it could be a problem with the printable area not
being correct. CUPS should get that information from a PPD file--I
think. Do you have the correct PPD installed...er...wherever it shou
Quoth Warren Block on Tuesday, 24 August 2010:
> On Tue, 24 Aug 2010, Chip Camden wrote:
> >Quoth Warren Block on Tuesday, 24 August 2010:
> >>As Chip Camden noted, it could be a problem with the printable area not
> >>being correct. CUPS should get that information from a PPD file--I
> >>think.
On Tue, Aug 24, 2010 at 06:12:40PM -0600, Warren Block wrote:
> On Tue, 24 Aug 2010, Chad Perrin wrote:
> >
> >CUPS is a black box to me, filled with black magic.
>
> Me too. That's why I use lpd.
I'm considering it, at least for this laptop. Still, it would be nice to
know how to fix this prob
On Tue, Aug 24, 2010 at 08:33:34PM -0700, Chip Camden wrote:
> Quoth Warren Block on Tuesday, 24 August 2010:
> >
> > It appears that PPDs are stored in the reasonably-named
> > /usr/local/etc/cups/ppd. There's a PPD for the LJ4050 in
> > print/foomatic-db...
> >
> > And it has
> > *Imageabl
44 matches
Mail list logo
