On Sun, 25 Jan 2009 17:23:35 +1000, Warren Liddell wrote:
> > % camcontrol devlist
>
> Typed this but no output what so ever, which presumably isnt a good thing.
If you have ATAPI devices, you need to have the ATAPICAM facility
loaded, either by
# kldload /boot/kernel/atapicam.ko
o
EA EA wrote:
I just upgraded X and when I started X with a fresh config.
When X starts I see the normal no-wm-yet screen with an unmovable mouse.
When I press ctrl+alt+spc I hear 3 beeps followed by a black screen.
I tried x11/nvidia-driver and x11-drivers/xf86-video-nv.
What should I be trying
EA EA wrote:
I just upgraded X and when I started X with a fresh config.
When X starts I see the normal no-wm-yet screen with an unmovable mouse.
When I press ctrl+alt+spc I hear 3 beeps followed by a black screen.
I tried x11/nvidia-driver and x11-drivers/xf86-video-nv.
What should I be trying
Ajtim Civolvap wrote:
Hi!
My system 7.1.
I am (was) user of postmaster but the last update for Xorg it did mess. Than I
use portupgrade -arR and was okay, X works okay but when I run:
portupgrade -arR
** Port marked as IGNORE: x11-drivers/xf86-video-vga:
is marked as broken: Needs to
i have a cannon pixma ip1000 and i have tried various ways to set it up so i
can print using methods found through google, but so far nothing has had
success, so id like to know if there is an idiots guide to the dummies version
of trying to setup a printer to work cause im in desperate need of
I think the ISO-9660 + RockRidge is the most comfortable way for
what you intend - allthough the tar method (or even the UFS method)
won't be any problem here. But as I said, maximum compatibility is
always welcome for backups.
well not always.
___
fr
cdr.iso:ISO 9660 CD-ROM filesystem data 'CDROM
642848 -rw-r--r-- 1 kline wheel 657922048 Jan 24 15:34 cdr.iso
what is the safest command to use to burn to 1. a CD, and 2. a
DVD? Since `file' says that cdr.iso is a filesystem, I'm
if it ISO9660 fi
I know this is *very* lazy stuff, but it works, and I never change
a running system. :-)
which is always a good thing.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any m
This may or may not be suitable for your situation but this is how I
generally set printers up:
1. Install print/cups (yes the full wrapper port)
2. Edit your /etc/make.conf by adding a line that says no LPR
3. Add CUPS_ENABLE="YES" to your /etc/rc.conf
4. Manually start cups (run "cupsd" as root)
Warren Liddell wrote:
> i have a cannon pixma ip1000 and i have tried various ways to set it up so i
> can print using methods found through google, but so far nothing has had
> success, so id like to know if there is an idiots guide to the dummies
> version
> of trying to setup a printer to wo
Hi:
[note: i'm aware about Alpine in ports and am keen to install and use
only Pine].
i'm trying to build Pine 4.64 from the sources downloaded from Univ of
Wash site.
For SSL support, i have installed OpenSSL 0.9.8j from ports.
Here is the standard command run at the top of the pine source tree
Dieter wrote:
AMD64 FreeBSD 7.0 2 GiB main memory
My console says:
login: swap_pager: indefinite wait buffer: bufobj: 0, blkno: 22, size: 4096
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 22, size: 4096
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 22, size: 4096
swap_pager:
Hi List,
I installed www/privoxy+ipv6, the patched privoxy for ipv6. It installs fine
but I have to start it everytime manually at boot.
I added this to /etc/rc.conf :
privoxy_enable="YES"
privoxy_flags="/usr/local/etc/privoxy/config"
Since there is no startup script provided, I copied the one
Hello,
I am doing the portupgrade inside my jail.
I see that script(1) have no permission on openpty.
I deleted all the devfs rules on tha jail's /dev both by hand and by deleting
the ruleset string in master's rc.conf.
So i stopped jail and mounted devfs by hand. Started jail. It appears to work
Hello,
I always try to set up the devfs ruleset in rc.conf. So my question is about
this in /etc/defaults/rc.conf:
===
#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail
===
It appears not to work in /etc/rc.conf without this rc.subr patch:
===
$ diff -u /etc/rc.su
Hello all.
I search some guides - how to install FreeBSD on 10+ hosts at once.
As I understand right - it is some thing about PXE and some install.cfg.
--
Best regards,
Proskurin Kirill
___
freebsd-questions@freebsd.org mailing list
http://lists.freebs
On Sat, 24 Jan 2009 14:48:39 + Dieter
wrote:
>> >> AMD64 FreeBSD 7.0 2 GiB main memory
>> >>
>> >> My console says:
>> >>
>> >> login: swap_pager: indefinite wait buffer: bufobj: 0, blkno: 22,
>> >> size: 4096
>> >> swap_pager: indefinite wait buffer: bufobj: 0, blkno: 22, size: 4096
>
I search some guides - how to install FreeBSD on 10+ hosts at once.
As I understand right - it is some thing about PXE and some install.cfg.
no. just make PXE able to boot ANY FreeBSD install (single user is enough,
or boot from CD/DVD) and then copy all files from one host to another.
then jus
Hello all.
I search some guides - how to install FreeBSD on 10+ hosts at once.
As I understand right - it is some thing about PXE and some install.cfg.
forgot - you have to of course make disklabel, newfs and make disk
bootable (bsdlabel -B disk)
__
I tried renaming it to "privoxy.sh" and "privoxy" (without any extension) but
nothing seems to work. All I get is this error message in dmesg :
r...@bsdaddict# dmesg -a | grep privoxy
/etc/rc: WARNING: run_rc_command: cannot run %%PREFIX%%/sbin/privoxy
r...@bsdaddict#
please do sent-pr for port
Wojciech Puchar пишет:
Hello all.
I search some guides - how to install FreeBSD on 10+ hosts at once.
As I understand right - it is some thing about PXE and some install.cfg.
forgot - you have to of course make disklabel, newfs and make disk
bootable (bsdlabel -B disk)
Well - and if need
In my third attempt to get any form of a working X server I tried the
xf86-video-vesa driver.
(x11/nvidia-driver fails, x11-drivers/xf86-video-nv fails)
I get the following error message:
failed to set mtrr: Invalid argument
In Xorg.log I have the following line at the end"
(==) VESA(0): Write co
Without wanting to start an endless discussion, I may say that I've
recognized the tendency to slow down programs in UNIX world such as
it is always described in "Windows" land: As soon as you get a new
OS or new programs, everything runs slower than before. In order to
keep the "overall usage sp
Well - and if need just to power on server and say it to boot at PXE and go
away for 30 min.
And then I came back - I have a typical preconfigured server.
I need full automatisation.
so make simple PXE bootable system and write script to make
disklabels, do newfs, install (copy/untar) your syste
Proskurin Kirill wrote:
Hello all.
I search some guides - how to install FreeBSD on 10+ hosts at once.
As I understand right - it is some thing about PXE and some install.cfg.
Another idea is to make one installation and make an image of it.
With clonezilla it will be able to use pxe to instal
Another idea is to make one installation and make an image of it.
With clonezilla it will be able to use pxe to install it on many hosts.
http://clonezilla.org/
After you install your image, you must, how Wojciech Puchar told you, change
ip (or you use dhcp), hostname and other stuff like this.
Hi
I am having problems building ghostscript8-8.63 from ports with the below
error
: multiple definition of `gs_shared_init'
./obj/../soobj/gdevl256.o(.text+0x780): first defined here
gmake[1]: *** [bin/../sobin/libgs.so.8.63] Error 1
After some googling about it seems this is an old issue with
Why is the President of Israel, the terrorist who just oversaw the Zionist mass
murder and maiming of thousands of Palestinians so happy
that Obama is President of the USA?
by David Duke
Read the excerpt from the Israeli News about how President Perez and Israel
think that Obamas becoming U.S.
On Sun, Jan 25, 2009 at 02:38:25PM +, LtCdData wrote:
> Hi
> I am having problems building ghostscript8-8.63 from ports with the below
> error
> : multiple definition of `gs_shared_init'
> ./obj/../soobj/gdevl256.o(.text+0x780): first defined here
> gmake[1]: *** [bin/../sobin/libgs.so.8.63] E
Lawrence Auster wrote:
>Bla bla bla Ku Klux Klan crap.
Why don't you bring your hatred outta here. This is a family-oriented channel.
Next time, even when you put OOT label on subject, I still will call it crap.
If you name me Jewish lover, well, I'm Asian, that means I'm a chink. But it's
Mr.
Hello All,
Does anyone know how I can remove the Kerberos 5 installation from FreeBSD?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsu
I have the following errors when I view YouTube video. I got the errors
from linux-flashplugin9 and firefox3.
LoadPlugin: failed to initialize shared library
/usr/home/Drive/.mozilla/plugins/nppdf.so [/lib/libc.so.6: version
GLIBC_2.1.3 required by /usr/home/Drive/.mozilla/plugins/nppdf.so not
d
Hello,
Can I read cpu die temperature for my AMD Athlon 64 X2 cpu with
coretemp? According to
http://www.alcpu.com/CoreTemp/supportlist.html
it includes AMD processors but when I load coretemp.ko sysctl still
can't see dev.cpu.?.temperature.
Is this even the same coretemp as the website ta
On Sun, 25 Jan 2009 15:53:12 +0100 (CET), Wojciech Puchar
wrote:
> why don't simply use unix tools. for same-sized harddrives simply use dd
Or dump / restore, as described in the handbook.
--
Polytropon
>From Magdeburg, Germany
Happy FreeBSD user since 4.0
Andra moi ennepe, Mousa, ...
___
On Sun, Jan 25, 2009 at 11:06:32AM -0500, Ansar Mohammed wrote:
> Hello All,
>
> Does anyone know how I can remove the Kerberos 5 installation from FreeBSD?
Put 'WITHOUT_KERBEROS=true' in /etc/src.conf, and rebuild the system
from source, as documented in the Handbook.
Roland
--
R.F.Smith
On Sun, Jan 25, 2009 at 11:21 AM, Chris Whitehouse wrote:
> Hello,
>
> Can I read cpu die temperature for my AMD Athlon 64 X2 cpu with coretemp?
> According to
>
> http://www.alcpu.com/CoreTemp/supportlist.html
>
> it includes AMD processors but when I load coretemp.ko sysctl still can't
> see dev
On Sun, Jan 25, 2009 at 10:05:12AM +0100, Wojciech Puchar wrote:
> > cdr.iso:ISO 9660 CD-ROM filesystem data 'CDROM
> > 642848 -rw-r--r-- 1 kline wheel 657922048 Jan 24 15:34 cdr.iso
> >
> > what is the safest command to use to burn to 1. a CD, and 2. a
> > DVD? Sin
> Date: Sat, 24 Jan 2009 22:29:01 -0500
> From: wcl...@dl1.njit.edu
> To: freebsd-questions@freebsd.org
> Subject: (no subject)
>
> I just in stalled VTiger and missed the instructions on how to install it
> .do know or is there a command that will let me find that info
You could take a look at
On Sunday 25 January 2009 2:25:55 pm Roland Smith wrote:
> On Sun, Jan 25, 2009 at 11:06:32AM -0500, Ansar Mohammed wrote:
> > Hello All,
> >
> > Does anyone know how I can remove the Kerberos 5 installation from
> > FreeBSD?
>
> Put 'WITHOUT_KERBEROS=true' in /etc/src.conf, and rebuild the system
On Sunday 25 January 2009, Chris Whitehouse wrote:
> Can I read cpu die temperature for my AMD Athlon 64 X2 cpu with
> coretemp?
According to the man page the coretemp driver only provides support for
the on-die digital thermal sensor present in Intel Core and newer CPUs,
suggesting that it wo
Why is the President of Israel, the terrorist who just oversaw the Zionist mass
murder and maiming of thousands of Palestinians so happy
that Obama is President of the USA?
by David Duke
because he use FreeBSD?
___
freebsd-questions@freebsd.org maili
On Sunday 25 January 2009 4:15:24 pm Bogdan Potishuk wrote:
> Gonzalo Nemmi said the following on 25.01.2009 19:05:
> > On Sunday 25 January 2009 2:25:55 pm Roland Smith wrote:
> >> On Sun, Jan 25, 2009 at 11:06:32AM -0500, Ansar Mohammed wrote:
> >>> Hello All,
> >>>
> >>> Does anyone know how I c
On Sun, Jan 25, 2009 at 03:05:37PM -0200, Gonzalo Nemmi wrote:
> On Sunday 25 January 2009 2:25:55 pm Roland Smith wrote:
> > On Sun, Jan 25, 2009 at 11:06:32AM -0500, Ansar Mohammed wrote:
> > > Hello All,
> > >
> > > Does anyone know how I can remove the Kerberos 5 installation from
> > > FreeBSD
On Sunday 25 January 2009 4:53:12 pm Roland Smith wrote:
> On Sun, Jan 25, 2009 at 03:05:37PM -0200, Gonzalo Nemmi wrote:
> > On Sunday 25 January 2009 2:25:55 pm Roland Smith wrote:
> > > On Sun, Jan 25, 2009 at 11:06:32AM -0500, Ansar Mohammed wrote:
> > > > Hello All,
> > > >
> > > > Does anyone
On Sunday 25 January 2009, Roland Smith wrote:
> On Sun, Jan 25, 2009 at 02:38:25PM +, LtCdData wrote:
> > Hi
> > I am having problems building ghostscript8-8.63 from ports with the below
> > error
> >
> > : multiple definition of `gs_shared_init'
> >
> > ./obj/../soobj/gdevl256.o(.text+0x780):
How can I detect if system has Software or hardware raid? Since in manual page:
The atacontrol command can also be used to create purely software RAID
arrays in systems that do NOT have a "real" hardware RAID card such as a
Highpoint or Promise card. A common scenario is a 1U server su
I am trying to upgrade from 7.0-STABLE to 7.1 Release.
I used RELENG_7_1 as my cvsup tag.
But no matter what I try I get error's during make buildworld
---
/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc/sched-ebb.c: In
function 'sched
Josh Carroll wrote:
On Sun, Jan 25, 2009 at 11:21 AM, Chris Whitehouse wrote:
Hello,
Can I read cpu die temperature for my AMD Athlon 64 X2 cpu with coretemp?
According to
http://www.alcpu.com/CoreTemp/supportlist.html
it includes AMD processors but when I load coretemp.ko sysctl still can't
---Original Message---
From: freebsd-questions-requ...@freebsd.org
Date: 1/24/2009 5:47:01 PM
To: freebsd-questions@freebsd.org
Subject: freebsd-questions Digest, Vol 246, Issue 51
Send freebsd-questions mailing list submissions to
freebsd-questions@freebsd.org
To subscribe or u
On Sunday 25 January 2009, Josh Carroll wrote:
> For (supported) AMD processors, check out k8temp(4).
That gives very odd results for me:
curlew:/home/mike% sudo k8temp
CPU 0 Core 0 Sensor 0: 13c
CPU 0 Core 0 Sensor 1: 11c
CPU 0 Core 1 Sensor 0: 19c
CPU 0 Core 1 Sensor 1: 2c
Those are all well
I have the snd_hda driver which creates /dev/dsp0.0 and /dev/sndstat but
I get no sound when I do cat /bin/sh > /dev/dsp0.0.
I know I need to change device hints etc. but I'm not sure to which ones.
/dev/sndstat attached with verbose level 3
FreeBSD Audio Driver (newpcm: 32bit 2007061600/i386)
Ins
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Omer Faruk Sen wrote:
> How can I detect if system has Software or hardware raid? Since in manual
> page:
>
> The atacontrol command can also be used to create purely software RAID
> arrays in systems that do NOT have a "real" hardware RAID car
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Omer Faruk Sen wrote:
> How can I detect if system has Software or hardware raid? Since in manual
> page:
>
> The atacontrol command can also be used to create purely software RAID
> arrays in systems that do NOT have a "real" hardware RAID car
To build ports in parallel on a 4 core machine, I usually
do this manually:
# cd /usr/ports/some/port
# make configure && make -j5 build && make install clean
because all steps except "make build" are not compatible
with -jN (some ports don't work with -jN in the "make build"
phase either, bu
ar RAID devices are almost always software/BIOS RAID. In this case
intel matrix raid is software RAID provided by the system BIOS. The
it's always better to use gmirror. not mentioning more flexibility (you do
not have to mirror whole drives)
___
I am trying to upgrade from 7.0-STABLE to 7.1 Release.
I used RELENG_7_1 as my cvsup tag.
But no matter what I try I get error's during make buildworld
---
/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc/sched-ebb.c: In
function 'sched
Friends,
I need a hex editor able to work directly with disks, preferably
those, which can be started without X.
I tried hexcurse, chexedit, bpatch - and it seems that they are unable
to open /dev/something.
Also, I would like to know about a tool to show low-level disk
information. For example,
On Sun, Jan 25, 2009 at 4:44 PM, cpghost wrote:
> To build ports in parallel on a 4 core machine, I usually
> do this manually:
>
> # cd /usr/ports/some/port
> # make configure && make -j5 build && make install clean
>
> because all steps except "make build" are not compatible
> with -jN (some p
On Sun, 2009-01-25 at 18:57 +0100, Wojciech Puchar wrote:
> > Why is the President of Israel, the terrorist who just oversaw the Zionist
> > mass murder and maiming of thousands of Palestinians so happy
> > that Obama is President of the USA?
> > by David Duke
> because he use FreeBSD?
ROFL
> Why don't you bring your hatred outta here. This is a family-oriented channel.
>
> Next time, even when you put OOT label on subject, I still will call it crap.
>
> If you name me Jewish lover, well, I'm Asian, that means I'm a chink. But
> it's Mr. Chink to you, thank you very much.
>
Mark it
Mike Clarke wrote:
On Sunday 25 January 2009, Josh Carroll wrote:
For (supported) AMD processors, check out k8temp(4).
That gives very odd results for me:
curlew:/home/mike% sudo k8temp
CPU 0 Core 0 Sensor 0: 13c
CPU 0 Core 0 Sensor 1: 11c
CPU 0 Core 1 Sensor 0: 19c
CPU 0 Core 1 Sensor 1: 2c
On Sun, Jan 25, 2009 at 05:22:04PM -0500, Josh Carroll wrote:
> On Sun, Jan 25, 2009 at 4:44 PM, cpghost wrote:
> > To build ports in parallel on a 4 core machine, I usually
> > do this manually:
> >
> > # cd /usr/ports/some/port
> > # make configure && make -j5 build && make install clean
> >
>
Mike Clarke wrote:
> But I get sensible looking results for my Athlon 64 X2 4850e with the
> following command:
>
> sysctl hw.acpi.thermal.tz0.temperature
For some reason it works on your 4850e. But for some of us this command
does not work. It never reports anything but 40 C on my Athlo
On Sun, Jan 25, 2009 at 1:56 PM, Terry wrote:
> I am trying to upgrade from 7.0-STABLE to 7.1 Release.
> I used RELENG_7_1 as my cvsup tag.
>
> But no matter what I try I get error's during make buildworld
>
> ---
>
> /usr/src/gnu/usr.bin/cc/cc_i
On Tue, 20 Jan 2009 18:16:45 -0500, Manolis Kiagias
wrote:
As a side note, I have a machine specifically for building packages and
it just happens that I finished a complete build run today (for FreeBSD
7.1 32bit). This includes XFCE, Xorg, Gnome + power tools + fifth toe,
KDE4 (4.1 actually)
Thomas W. Holloway wrote:
> On Tue, 20 Jan 2009 18:16:45 -0500, Manolis Kiagias
> wrote:
>
>> As a side note, I have a machine specifically for building packages and
>> it just happens that I finished a complete build run today (for FreeBSD
>> 7.1 32bit). This includes XFCE, Xorg, Gnome + power to
On Sun, 25 Jan 2009 23:51:45 +0200
Alex Karpovic wrote:
> I need a hex editor able to work directly with disks, preferably
> those, which can be started without X.
> I tried hexcurse, chexedit, bpatch - and it seems that they are unable
> to open /dev/something.
Have you tried /usr/bin/hd? It se
Folks,
Is there a way to split a large pdf file into smaller [ say 1MB ]
chunks? Or are there open source tools out there that i can
build?
thanks in advance,
gary
--
Gary Kline kl...@thought.org http://www.thought.org Public Serv
>> I need a hex editor able to work directly with disks, preferably
>> those, which can be started without X.
>> I tried hexcurse, chexedit, bpatch - and it seems that they are unable
>> to open /dev/something.
>
> Have you tried /usr/bin/hd? It seems it doesn't have any problem opening
> disk devi
On Sun, Jan 25, 2009 at 04:18:26PM -0800, Gary Kline wrote:
> Folks,
>
> Is there a way to split a large pdf file into smaller [ say 1MB ]
> chunks? Or are there open source tools out there that i can
> build?
>
> thanks in advance,
>
> gary
To split
On Sun, Jan 25, 2009 at 03:18:43AM +0100, Polytropon wrote:
> On Sat, 24 Jan 2009 17:56:33 -0800, Gary Kline wrote:
> > Now that I have
> >
> > cdr.iso:ISO 9660 CD-ROM filesystem data 'CDROM
> > 642848 -rw-r--r-- 1 kline wheel 657922048 Jan 24 15:34 cdr.iso
> >
> >
Folks,
Is there a way to split a large pdf file into smaller [ say 1MB ]
chunks? Or are there open source tools out there that i can
build?
as every other file. use split.
or you meant splitting to separate pdf by some pages?
convert to ps (pdf2ps)
then use mpa
because, well, they aren't PDF files anymore. ;-)
For this, you'd prefer to split the PDF file after
N pages. You may want to investigate print/pdftk:
From /usr/ports/print/pdftk/pkg-descr:
If PDF is electronic paper, then pdftk is an electronic staple-remover,
hole-punch, binder, secret-dec
On Sun, 25 Jan 2009 23:46:54 +0100
cpghost wrote:
> That's a good hint indeed. I'll try it. Maybe I'll modify it a bit to
> include ONLY the "build" target, because -jN fails on nearly every
> other target, AFAICS.
Don't forget that there are two different makes; BSD make does the ports
infrastr
On Sun, Jan 25, 2009 at 03:35:44AM +0100, cpghost wrote:
> On Sat, Jan 24, 2009 at 05:56:33PM -0800, Gary Kline wrote:
> > Now that I have
> >
> > cdr.iso:ISO 9660 CD-ROM filesystem data 'CDROM
> > 642848 -rw-r--r-- 1 kline wheel 657922048 Jan 24 15:34 cdr.iso
> >
>
I currently have to retrieve crontab generated system mail from the command
line. Is it possible to have system mail delivered to my Thunderbird
mail client?
Rem
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
On Sun 25 Jan 2009 at 16:18:26 PST Gary Kline wrote:
Is there a way to split a large pdf file into smaller [ say 1MB ]
chunks? Or are there open source tools out there that i can build?
pdfsam ( http://www.pdfsam.org/ ) does both splits and merges of pdf
files, but it doesn't seem
On Mon, Jan 26, 2009 at 01:37:08AM +0100, Wojciech Puchar wrote:
> > because, well, they aren't PDF files anymore. ;-)
> > For this, you'd prefer to split the PDF file after
> > N pages. You may want to investigate print/pdftk:
> >
> >> From /usr/ports/print/pdftk/pkg-descr:
> >
> > If PDF is elec
On Saturday 24 January 2009 04:06:39 Jack L. Stone wrote:
> At 04:33 PM 1.23.2009 +0100, cpghost wrote:
> >On Fri, Jan 23, 2009 at 05:56:45PM +0300, Odhiambo Washington wrote:
> >> On Fri, Jan 23, 2009 at 5:19 PM, Jack L. Stone
>
> wrote:
> >> > During an upgrade from fbsd-6.3 --> fbsd-7.0, somethi
On Sun 25 Jan 2009 at 16:51:56 PST Charlie Kester wrote:
On Sun 25 Jan 2009 at 16:18:26 PST Gary Kline wrote:
Is there a way to split a large pdf file into smaller [ say 1MB ]
chunks? Or are there open source tools out there that i can build?
pdfsam ( http://www.pdfsam.org/ ) does
On Sunday 25 January 2009 10:00:01 Gonzalo Nemmi wrote:
> Going through src.conf(5) is ok .. but having a src.conf template already
> available and fully commented sounds better to me ...
>
> Nothing is further from the truth than my opinions, but I still think that
> having such a file available
On Sun, 25 Jan 2009, Rem P Roberti wrote:
> I currently have to retrieve crontab generated system mail from the command
> line. Is it possible to have system mail delivered to my Thunderbird
> mail client?
According to the cron(8) manual:
When executing commands, any output is mailed to th
On Sunday 25 January 2009 02:35:16 Peter Vereshagin wrote:
> Hello,
>
> I always try to set up the devfs ruleset in rc.conf. So my question is
> about this in /etc/defaults/rc.conf: ===
> #jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to
> jail ===
>
> It appears not to wo
On Sunday 25 January 2009 02:25:17 Peter Vereshagin wrote:
> Hello,
>
> I am doing the portupgrade inside my jail.
> I see that script(1) have no permission on openpty.
> I deleted all the devfs rules on tha jail's /dev both by hand and by
> deleting the ruleset string in master's rc.conf. So i sto
On Saturday 24 January 2009 19:05:19 EA EA wrote:
> dlopen: /usr/local/lib/xorg/modules//libwfb.so: Undefined symbol
> "miZeroLineScreenIndex"
> (EE) Failed to load /usr/local/lib/modules//libfw.so
> (EE) Failed to load module "wfb" (loader failed 7)
>
> Fatal server error:
> Caught sigal 11. Serv
On Saturday 24 January 2009 16:37:08 Jeffrey R. Hellem wrote:
> [r...@server /usr/ports/databases/php5-dba]# make clean
> ===> Cleaning for php5-dba-5.2.8
> [r...@server /usr/ports/databases/php5-dba]#
>
> i tried make install
>
> [r...@server /usr/ports/databases/php5-dba]# make install
> instal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Charlie Kester wrote:
> On Sun 25 Jan 2009 at 16:18:26 PST Gary Kline wrote:
>>
>> Is there a way to split a large pdf file into smaller [ say 1MB ]
>> chunks? Or are there open source tools out there that i can build?
>
> pdfsam ( http://w
On Sunday 25 January 2009 11:42:59 pm Mel wrote:
> On Sunday 25 January 2009 10:00:01 Gonzalo Nemmi wrote:
> > Going through src.conf(5) is ok .. but having a src.conf template already
> > available and fully commented sounds better to me ...
> >
> > Nothing is further from the truth than my opinio
On Sunday 25 January 2009 11:01:11 pm Rem P Roberti wrote:
> I currently have to retrieve crontab generated system mail from the command
> line. Is it possible to have system mail delivered to my Thunderbird
> mail client?
>
> Rem
On a default system, you probably want to edit /etc/aliases an mak
On Sun, Jan 25, 2009 at 06:57:48PM +0100, Wojciech Puchar wrote:
>
> >Why is the President of Israel, the terrorist who just oversaw the Zionist
> >mass murder and maiming of thousands of Palestinians so happy
> >that Obama is President of the USA?
> >by David Duke
> because he use FreeBSD?
Man
On Sun, Jan 25, 2009 at 04:04:15PM +, Anthony M. Rasat wrote:
> Lawrence Auster wrote:
> >Bla bla bla Ku Klux Klan crap.
>
> Why don't you bring your hatred outta here. This is a family-oriented channel.
>
> Next time, even when you put OOT label on subject, I still will call it crap.
>
> If
>> Any idea what is causing this or how to fix it ?
>
> You upgraded xorg-server after nvidia-driver, which installed it's own libwfb
> over nvidia's. Reinstall nvidia-driver and the problem should go away.
>
I tried both ways. In either case the symlink was still from libwfb ->
nvidia libwfb.
On Saturday 24 January 2009 09:32:54 Doug Poland wrote:
> Hello,
>
> I've got a network running different versions of FreeBSD (6.3, 7.0) on
> different architectures (i386, SPARC64).
>
> What I'd like to do is export the ports hierarchy to all machines, but
> preserving ports/packages for each vers
I upgrade to Xorg 7.4 yesterday, and now I can't seem to start gnome.
For the life of me, I can't figure out what is going on. startx and X
both start fine... (that is how I am able to type this email). But when
starting the machine, my screen just flashes a few times and returns to
the console
Jeff Molofee wrote:
> I upgrade to Xorg 7.4 yesterday, and now I can't seem to start gnome.
> For the life of me, I can't figure out what is going on. startx and X
> both start fine... (that is how I am able to type this email). But when
> starting the machine, my screen just flashes a few times an
On Sunday 25 January 2009 17:46:20 Eitan Adler wrote:
> >> Any idea what is causing this or how to fix it ?
> >
> > You upgraded xorg-server after nvidia-driver, which installed it's own
> > libwfb over nvidia's. Reinstall nvidia-driver and the problem should go
> > away.
>
> I tried both ways. In
On Sunday 25 January 2009 11:01:11 pm Rem P Roberti wrote:
I currently have to retrieve crontab generated system mail from the command
line. Is it possible to have system mail delivered to my Thunderbird
mail client?
Rem
On a default system, you probably want to edit /etc/aliases an ma
I don't want to raise an argument here (on multiple levels, no less...),
but what would the compatibility be between FreeBSD (release) and
Solaris?
Why I ask is Adobe have released a version of flash for Solaris, and I'm
wondering if this might work better than the linux_compat types. I tried
runn
AMD64 FreeBSD 7.0 2 GiB main memory
My console says:
login: swap_pager: indefinite wait buffer: bufobj: 0, blkno: 22, size: 4096
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 22, size: 4096
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 22, size:
On Monday 26 January 2009 2:42:13 am Rem P Roberti wrote:
> On Sunday 25 January 2009 11:01:11 pm Rem P Roberti wrote:
>
>
> I currently have to retrieve crontab generated system mail from the command
> line. Is it possible to have system mail delivered to my Thunderbird
> mail client?
>
> Rem
>
>
1 - 100 of 113 matches
Mail list logo
