Hello Group
We have a FreeBSD 5.4-STABLE System which is booting once or
twice in a week without any meaningfull messages on the console
or in a logfile.
May 14 11:41:26 ldxp syslogd: kernel boot file is
/boot/kernel/kernel
May 14 11:41:26 ldxp savecore: reboot after panic: page fault
...
May 14
God day. I have some problem with ipsec, established between two
networks
10.11.0.0/16, D-Link DFL-210. LAN IP - 10.11.3.1
10.11.56.0/16, FreeBSD 6.3 LAN IP - 10.11.56.1
/etc/ipsec.conf
flush;
spdflush;
spdadd 10.11.56.0/24 10.11.0.0/16 any -P out ipsec
esp/tunnel/xx.xx.xx.xx-yy.yy.yy.yy/req
Quoting Vince Hoffman <[EMAIL PROTECTED]> (from Mon, 19 May 2008
22:45:29 +0100):
Yani Brankov wrote:
Hey guys,
Hi
I recently updated to FreeBSD 7 and noticed that my box started to
perform as windows does under heavier loads. The mouse starts to be
Which scheduler? ULE or BSD? Try th
On Tue, May 20, 2008 at 8:11 AM, Randy Bush <[EMAIL PROTECTED]> wrote:
> > did you ever try comment out the three extensions I mentioned in my
> > previous email? That fixed it right up for me.
>
> i did not have those extensions at all. or maybe i did not understand
> where they are.
>
Could y
On Tuesday 20 May 2008 02:41, RW wrote:
> On Mon, 19 May 2008 21:46:03 +1200
>
> Jonathan Chen <[EMAIL PROTECTED]> wrote:
> > On Mon, May 19, 2008 at 01:49:35AM -0700, Garrett Cooper wrote:
> > > Riddle for the day for folks that have source trees... what would
> > > you expect this to print out (a
> Could you guys google for fixphpextorder.sh and see if that would help.
> It did help me last year when I had this problem and I always rely on it
> during upgrade, but I'm not saying I guarantee it will:-)
still cores
# /usr/local/etc/rc.d/apache22 start
Performing sanity check on apache22 con
>> # /usr/local/etc/rc.d/apache22 start
>> Performing sanity check on apache22 configuration:
>> Segmentation fault (core dumped)
>> Starting apache22.
>> Segmentation fault (core dumped)
>
> Apache (1.3) would core dump when pgsql (from php 5.2.5) was loaded as
> a module. Commenting this module
>> Could you guys google for fixphpextorder.sh and see if that would help.
>> It did help me last year when I had this problem and I always rely on it
>> during upgrade, but I'm not saying I guarantee it will:-)
>
> still cores
>
> # /usr/local/etc/rc.d/apache22 start
> Performing sanity check on a
On Mon, May 19, 2008 at 06:05:38AM -0500, [EMAIL PROTECTED] wrote:
>
> Hello all,
>
> I'm seeking to set up an SVN repository on my home machine. I've come
> across the following two guides:
>
> http://www.bsdguides.org/guides/freebsd/misc/subversion.php
>
> http://www.onlamp.com/pub/a/bsd/2007
Hi all
I'm running FreeBSD 7.0-Stable and now I need to have webcam & mic for
using ekiga.
I'm never using this kind of software before.
I would like to known what's model of webcam and mic is best for ekiga &
FreeBSD 7. When I say best that's mean --> easy to install (no patch to
apply, etc.)
I recently updated to FreeBSD 7 and noticed that my box started to perform
as windows does under heavier loads. The mouse starts to be
Which scheduler? ULE or BSD? Try the other one you use currently.
with any it's slower than 6.3.
___
freebsd-quest
Hello Friends
Which System-board and Processor is BEST for FreeBSD AMD64 7.0-RELEASE?
RAM will be used around 8GB - 16GB.
--
Thanks!
BR / vj
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
El día Tuesday, May 20, 2008 a las 03:26:09PM +0200, Albert Shih escribió:
> Hi all
>
> I'm running FreeBSD 7.0-Stable and now I need to have webcam & mic for
> using ekiga.
>
> I'm never using this kind of software before.
>
> I would like to known what's model of webcam and mic is best for e
On Tue, 20 May 2008 11:33:50 +0200
Jonathan McKeown <[EMAIL PROTECTED]> wrote:
> On Tuesday 20 May 2008 02:41, RW wrote:
> > On Mon, 19 May 2008 21:46:03 +1200
> >
> > Jonathan Chen <[EMAIL PROTECTED]> wrote:
> > > find /usr/src \( -name Makefile -or -name '*.mk' \) -print
> >
> > Why does th
Hey all,
We have recently been getting a lot of traffic to one of our sites.
The CPU is consistently during busy periods using 100% utilisation.
When this happens we have approx 150 apache threads, and the loads
goes way above 15.
However recently the server has been auto-restarting (when under h
Crash dumps should help.
Alan Gilmour wrote:
Hey all,
We have recently been getting a lot of traffic to one of our sites.
The CPU is consistently during busy periods using 100% utilisation.
When this happens we have approx 150 apache threads, and the loads
goes way above 15.
However recently
Hi Roberto,
There's nothing in /var/crash
Any other ideas?
Cheers
Alan
On 20/05/2008, Roberto Nunnari <[EMAIL PROTECTED]> wrote:
> Crash dumps should help.
>
>
> Alan Gilmour wrote:
> >
> > Hey all,
> >
> > We have recently been getting a lot of traffic to one of our sites.
> > The CPU is cons
On May 19, 2008, Andrew Moran wrote:
> I recently upgraded my php5 ports to latest ports tree versions
> (5.2.6), and now I'm in a situation where any HUP signal sent to
> apache is causing the entire process to dump core. I get this in the
> apache error log:
>
> [Mon May 19 16:08:48 2008] [notic
Hi,
I'm using FreeBSD 7.0 RELEASE on amd64 and want to connect
to an iSCSI storage array that has dual SAN controllers. I have
two independent paths between my FreeBSD box and the storage
array -- dual NICs, ethernet switches, and controllers.
Given my situation, I want to ensure I get better pe
Alan Gilmour wrote:
We tried installing mbmon and lmmon and healthd, but none seem to work.
How so? Do you have an error message to share with us?
Anyone got any suggestions for other things we can try to detect why
the server is failing? or other ways to check things like CPU temp and
mem
I am using cvsup for backup, so I control both the client and the server.
Works fine everytime stand-alone, but when I execute via crontab it
appears to stall - then restart. Eventually there is so many copies of
cvsup running at the same time it starts to bog down the client.
I noticed in the m
On Mon, 19 May 2008, Randy Bush wrote:
386 very current
i have been unable to get apache not to segv on one server for a while
now.
i tried the php rebuild
i tried clearing obj, full system build, full ports force rebuild, ...
i just tried
If you have a backup of php/extensions.ini from be
Hi Mark,
I'm guessing there's not a compatible chip on the motherboard for both
of those items.
Its a DELL server and unfortunately we only actually have one disk on
it at the moment, so there's no RAID (which is also worrying :( )
Full memory checks have been on in the past and never reported a
At 09:17 AM 5/20/2008, Alan Gilmour wrote:
Hey all,
We have recently been getting a lot of traffic to one of our sites.
The CPU is consistently during busy periods using 100% utilisation.
When this happens we have approx 150 apache threads, and the loads
goes way above 15.
However recently the
At Tue, 20 May 2008 07:59:19 +0200,
Thomas Herzog wrote:
> cat /var/crash/info.1
follow this guide:
http://www.freebsd.org/doc/en/books/developers-handbook/kerneldebug-gdb.html
and post the results. if nobody answers, open a pr (problem report)
http://www.freebsd.org/send-pr.html
hth,
toni
--
the server is failing? or other ways to check things like CPU temp and
memory status?
What is the hardware vendor? Since most of the major players have decent
no it is not hardware problem.
___
freebsd-questions@freebsd.org mailing list
http://lists.
> Date: Mon, 19 May 2008 15:07:31 -0400
> From: [EMAIL PROTECTED]
> To: freebsd-questions@freebsd.org
> Subject: Re: Lock down the all-staff email list? sendmail, alias, majordomo?
>
> brad davison wrote:
> > What is the best way to have a list that only certain users are able to
> > send to?
>
On May 19, 2008, at 7:03 PM, Paul Schmehl wrote:
I'm not sure what the point of that is:
Macintosh:~ pauls$ dig +short my.mywebsite.com
Because of the way "mx1.free.bsd.org" was used (indicating that
someone is trying to describe an error rather than actually copy it
verbatim), I gathered
Then, if crash dumps are enabled, it could be a HW failure..
Once I had a server crashing with no dumps, and I found out
it was I power supply problem.
Best regards.
Robi
Alan Gilmour wrote:
Hi Roberto,
There's nothing in /var/crash
Any other ideas?
Cheers
Alan
On 20/05/2008, Roberto Nunn
OK I've narrowed down my problem to:
extension=mhash.so
in extensions.ini
If I comment out that php extension, I'm good. If I don't, I crash
when sending HUP signal to parent apache process. I experimented
with the order of the extensions.ini file but could not get to work
regardles
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Roberto Nunnari
> Sent: Tuesday, May 20, 2008 10:49 AM
> To: Alan Gilmour
> Cc: freebsd-questions@freebsd.org
> Subject: Re: Server crashing, no explanations
>
> Then, if crash dumps are enabled, it
[EMAIL PROTECTED]:
> Because of the way "mx1.free.bsd.org" was used (indicating
> that someone is trying to describe an error rather than
> actually copy it verbatim), I gathered that
> "my.mywebsite.com" was redacted along the lines of
> "host.example.com", rather than the actual hostname in
Hello Montag,
On Mon, May 19, 2008 at 7:05 AM, <[EMAIL PROTECTED]> wrote:
> Hello all,
>
> I'm seeking to set up an SVN repository on my home machine. I've come
> across the following two guides:
>
> http://www.bsdguides.org/guides/freebsd/misc/subversion.php
>
> http://www.onlamp.com/pub/a/bsd/
Hi Tobias,
Yes the plan is the next time it crashes is to check BIOS,
unfortunately I need to get hosts to do this as I can't physically
access the machine at this point, but they have some KVM like switch
attached to it.
Cheers
Alan
On 20/05/2008, Tobias Hoellrich <[EMAIL PROTECTED]> wrote:
>
Then, if crash dumps are enabled, it could be a HW failure..
no it is not. i have similar problems but not with apache, it is certainly
FreeBSD bug that causes it to randomly reboot under certain types of load.
i found the way to fix it in my case
_
On Tue, 20 May 2008, Andrew Moran wrote:
OK I've narrowed down my problem to:
extension=mhash.so
in extensions.ini
If I comment out that php extension, I'm good. If I don't, I crash
when sending HUP signal to parent apache process. I experimented with
the order of the extensions.ini file bu
> OK I've narrowed down my problem to:
>
> extension=mhash.so
>
> in extensions.ini
>
> If I comment out that php extension, I'm good. If I don't, I crash when
> sending HUP signal to parent apache process. I experimented with the
> order of the extensions.ini file but could not get to work re
On Tue, 20 May 2008 12:59:08 -0400
"Tandon, Sahil \(IM\)" <[EMAIL PROTECTED]> wrote:
> [EMAIL PROTECTED]:
>
> > Because of the way "mx1.free.bsd.org" was used (indicating
> > that someone is trying to describe an error rather than
> > actually copy it verbatim), I gathered that
> > "my.mywebsi
Greetings,
I have an application that runs on Linux or Mac OS X but seems to have
a problem when I run on FreeBSD (6.3 or 7). The issue is the memory
footprint for the application (osubw_sctpclien below) is quite large;
on Linux it can be as much as 950 MB in resident memory, according to
top. H
In response to "Brad Penoff" <[EMAIL PROTECTED]>:
>
> I have an application that runs on Linux or Mac OS X but seems to have
> a problem when I run on FreeBSD (6.3 or 7). The issue is the memory
> footprint for the application (osubw_sctpclien below) is quite large;
> on Linux it can be as much a
Hi all,
I have an ipw2200 bg. I can't make it work under FreeBSD 7 on AMD64.
This is the output of pciconf -lv
[EMAIL PROTECTED]:0:5:0: class=0x028000 card=0x27028086 chip=0x42208086
rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'MPCI3B driverIntel PRO/Wireless 2
On Tue, May 20, 2008 at 1:54 PM, Bill Moran <[EMAIL PROTECTED]> wrote:
> In response to "Brad Penoff" <[EMAIL PROTECTED]>:
>>
>> I have an application that runs on Linux or Mac OS X but seems to have
>> a problem when I run on FreeBSD (6.3 or 7). The issue is the memory
>> footprint for the applic
I'm using the following construction in a pkg-deinstall script for a port I
maintain:
if ( ${BATCH} ); then
The idea is, if you type make BATCH=1 deinstall, the port will deinstall
without running an interactive portion of the pkg-deinstall script. If you
type make deinstall, the pkg-deinsta
--On Tuesday, May 20, 2008 17:36:26 -0500 Paul Schmehl <[EMAIL PROTECTED]>
wrote:
I'm using the following construction in a pkg-deinstall script for a port I
maintain:
if ( ${BATCH} ); then
The idea is, if you type make BATCH=1 deinstall, the port will deinstall
without running an interactive
Hi, Paul--
On May 20, 2008, at 3:36 PM, Paul Schmehl wrote:
I'm using the following construction in a pkg-deinstall script for a
port I maintain:
if ( ${BATCH} ); then
[ ... ]
Why is this error printing to stdout and how can I suppress it? Or
is there a flaw in the logic that, if fixed, w
On Tue, May 20, 2008 at 05:36:26PM -0500, Paul Schmehl wrote:
> I'm using the following construction in a pkg-deinstall script for a port I
> maintain:
>
> if ( ${BATCH} ); then
This should read:
if [ -n "${BATCH}" ] ; then
--
Jonathan Chen <[EMAIL PROTECTED]>
I'm using abiword and gnumeric on FreeBSD 7 (amd64) and certain fonts
don't show in print preview mode, on actual printouts, or when saving to
postscript or PDF, while other fonts do. Times New Roman and Helvetica
are examples of fonts that don't work. The bitstream fonts are examples
that wo
On Sun, 2008-05-18 at 15:32 -0700, John Pettitt wrote:
>
>
> Slightly OT but since I'm going to run this on FreeBSD 7 I figured I'd
> ask here ..
>
> I have an application where data arrives in what is effectively
> continuous stream (actually NMEA messages from an AIS receiver) and I'd
> li
hi,
[EMAIL PROTECTED] STORAGE> kgdb kernel.debug /var/crash/vmcore.1
[GDB will not be able to debug user-mode threads: /usr/lib/libthread_db.so: Undefined
symbol "ps_pglobal_lookup"]
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU Ge
with backtrace, it looks like:
[EMAIL PROTECTED] STORAGE> kgdb kernel.debug /var/crash/vmcore.1
[GDB will not be able to debug user-mode threads: /usr/lib/libthread_db.so: Undefined
symbol "ps_pglobal_lookup"]
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free soft
since i activate ataidle i have this errors:
ad8: FAILURE - WRITE_DMA48 timed out LBA=314770799
+ad8: TIMEOUT - READ_DMA retrying (1 retry left) LBA=12207
+ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing
request directly
after disable it, this messages are gone.
so
Hello friends,
My employer is buying this Dell server and I would like to have your opinion
about the configuration.
Requirements are:
2 Websites with 3-4 million hits per month with video ads.
Operating System:
*FreeBSD AMD647-STABBLE*
Database:
*PHP+MySQL with Apache*
Server Configurati
52 matches
Mail list logo
