Re: Poll: What's the best audio player

On 13/02/07, Chris <[EMAIL PROTECTED]> wrote: What is the best audio (MP3/OGG/Etc) to use under Gnome? I was one of those Gnome-supporters and -lovers, too. Until I recently came to the conclusion that there isn't this one particularly good desktop environment. On the contrary, some Apps are go

Re: kernel: vr0: discard oversize frame

On Tuesday 13 February 2007 23:47, sai wrote: > (apologies if this is an inappropriate list for this, I am > relatively new to FreeBSD ) > > I get this error quite frequently on my pf firewall running 6.2 > and it leads to loss of internet access. > kernel: vr0: discard oversize frame (ether type

Re: How can I manually turn off the HDD?

At about the time of 2/13/2007 10:58 AM, Chuck Swiger stated the following: > On Feb 13, 2007, at 7:47 AM, [EMAIL PROTECTED] wrote: >> How can I turn off the HDD? .. and leave the buffers in the memory, >> until the RAM is full .. then spin up the drive, write out the >> data, then it turn off

Re: [SOLVED] php5-mysql? (with added bonus for snort)

Roger Olofsson skrev: Dear Mailing List, As usual I would like to thank the replies I go to my earlier questions and I will try and step up and answer the ones I can. Now for my question, After a recent buildworld/portupgrade everything seems to be up to date except a few and among those

NEED HELP

HELLO I NEED YOUR HELP REGARDING INSTALLING FREE BSD ON MY NEWLY BOUGHT PC. MY PC SPECS ARE P4 D 3.4GHZ, 1024MB DDR2 667 RAM, GIGABYTE MOTHER BOARD 945PL-S3, NX7300GT-TD256EH VIDEO CARD, SATA 250GB, 7200 RPM ( I DONT KNOW ITS SATA OR SATA II, CAUZ I DONT KNOW HOW TO CHECK, CAN U PLZ TELL ME.).

Re: [SOLVED] Help please: how to enable SSH password authentication under FreeBSD 6.2? Solved - but not in an expected way

Hi again, Well as mentioned yesterday, I couldn't let this one go by without at least trying to figure out the real reason, so I experimented somewhat further. The issue of ssh1 vs. ssh2 appears to already be clarified, so I won't go into it again. Yes, indeed. I myself yesterday came to r

Re: Newbie--new install on Core 2 Duo?

On Wed, 14 Feb 2007 07:44:57 +0100, Abdullah Ibn Hamad Al-Marri <[EMAIL PROTECTED]> wrote: Why shall you do the double job by installing the FreeBSD, then reinstall it after adding SMP option to kernel? Couldn't we get FreeBSD to install the right kernel based on the number of the cpu(s) in t

On demand local account creation ?

Hello I'm searching for a utility that could manage local ( that is : using adduser or similar ) on demand account creation through a web interface on a 6.2 box ? The ideal software would works when receiving email confirmation :-) Thanks ___ freebs

Re: NEED HELP

On Wed, 14 Feb 2007 08:57:51 +0100, Ata ur Rehman Alvi <[EMAIL PROTECTED]> wrote: HELLO I NEED YOUR HELP REGARDING INSTALLING FREE BSD ON MY NEWLY BOUGHT PC. http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/install.html Just read this chapter of the handbook and try not to use cap

Re: Newbie--new install on Core 2 Duo?

At about the time of 2/13/2007 12:07 PM, pete wright stated the following: > On 2/13/07, Gerard <[EMAIL PROTECTED]> wrote: >> On Tuesday February 13, 2007 at 01:42:23 (PM) pete wright wrote: >> >> >>> how would you define "correct"? have all systems boot with a SMP >>> kernel by default so that ma

mfi0 error

Hi all, I have problem with managing SAS RAID with linux-megacli System: FreeBSD 7.0-CURRENT on i386 Megacli form ports linux-megacli-1.01.09 LSI MegaRAID SAS controller management utility Machine is Fujitsu Siemens TX200 S3 with LSI Megaraid SAS 8300xlp (I have 5 SATA hd) - this controller work

Good synchronisation strategies (especially for the users and groups)?

Hi all, I hope someone can give me some good advice regarding synchronisation strategies between two (very) different FreeBSD installations. My live server runs FreeBSD 5.4 release AMD-64, and my fallback server runs FreeBSD 6.2 release i386. The drive sizes do not match eiter, as the live

Re: Good synchronisation strategies (especially for the users and groups)?

Olaf Greve wrote: However, I seem to recall (not sure, anymore though) having heard and/or read (here, perhaps?) that there are better ways to synchronise than using rsync... I guess you might have heard of ggated (8) & Co. This is quite different from rsync and might or might not be suited

Re: FILE RECOVERY

Ron Guilmet wrote: I have software that will do it in my windows pc, but I'm not really interested in what's on the drive as much as I am interested in how to work with this. /usr/ports/sysutils/magicrescue /usr/ports/sysutils/foremost /usr/ports/graphics/recoverjpeg http://memberwebs.co

IBM T60 laptop?

Hi All, I am looking for a good laptop to put FreeBSD (PCBSD) on. The general consensus seems to be that IBM make good units and that the T60 is a good choice. But when I look at the three components that seem to cause most trouble in laptops 1. Graphics cards, 2. high definition audio and 3

SSH Lockup

Hello Everyone, I just stumbled upon something very strange. I just installed 6.2 on a machine that was sitting in it's own private network behind an older 5.4 machine: Gateway - Switch - Workstation - FreeBSD_5.4 - FreeBSD_6.2

[SOLVED]SSH Lockup

On Wed, 14 Feb 2007 12:21:42 +0100, Indigo <[EMAIL PROTECTED]> wrote: Hello Everyone, I just stumbled upon something very strange. I just installed 6.2 on a machine that was sitting in it's own private network behind an older 5.4 machine: Gateway - Switch - Workstat

problem with rl network card

Hello :), I have a little problem with my new network card so it does not want to work with 6.2: The result: pciconf -l -v class= network subclass = ethernet [EMAIL PROTECTED]:10:0:class=0x02 card=0x chip=0x81391904 rev=0x01 hdr=0x00 class= network s

Re: RT36 port WITH_APACHE2

Joe Auty wrote: > I figured this out, > > My pkgtools.conf make args needed to read: > >>> MAKE_ARGS = { >>> >>> 'www/rt36' => '-DWITH_APACHE2' >>> } > > rather than: > >>> MAKE_ARGS = { >>> >>> 'www/rt36' => 'WITH_APACHE2' >>> } > > > Why is it t

Very Annoying PHP Errors

I recently upgraded to 5.2.1_1. After upgrading (or before not exactly sure) I began getting errors ALERT - canary mismatch on efree() - heap overflow detected in my Apache logs. Also, certain parts of one of my database (mysql) driven sites stopped working. Certain pages just stopped working,

Compile of Python 2.4.4 core dumps

Hi, Upgrading to latest version of python24 port (2.4.4), the compilation process core dumps shortly after it begins. Here is the output leading up to the core dump: cc -DNDEBUG -O2 -fno-strict-aliasing -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x2 -fPIC -fno-strict-aliasing -I. -I/usr/

Re: kernel: vr0: discard oversize frame

On 2/14/07, Josh Paetzel <[EMAIL PROTECTED]> wrote: I don't have any vr or rl cards, but see if you can increase the MTU on them. See the ifconfig manpage for details on how to do so. Obviously you'd want to set it to at least 1532. :) -- Thanks, Josh Paetzel mtu is currently 1500. "ifconf

Re: Very Annoying PHP Errors

On 14.02.2007 12:38, * Peter Pluta wrote: > I recently upgraded to 5.2.1_1. After upgrading (or before not exactly > sure) I began getting errors ALERT - canary mismatch on efree() - heap > overflow detected in my Apache logs. Also, certain parts of one of my > database (mysql) driven sites stopped

Viewing on remote PC

FreeBSD-6.2 I have a FBSD computer that I need to access via ssh from a WinXP machine running 'putty'. I am using ssh certificates for authorization. No problem there. I can do anything I want when I access the FBSD machine in this manner, except run something like KDE or XFCE4. I thought I mad

Re: Compile of Python 2.4.4 core dumps

On 2/14/07, Rob Gallagher <[EMAIL PROTECTED]> wrote: Hi, Upgrading to latest version of python24 port (2.4.4), the compilation process core dumps shortly after it begins. Here is the output leading up to the core dump: cc -DNDEBUG -O2 -fno-strict-aliasing -pipe -D__wchar_t=wchar_t -DTHREAD_STA

Re: Viewing on remote PC

White Hat wrote: > FreeBSD-6.2 > > I have a FBSD computer that I need to access via ssh from a WinXP machine > running 'putty'. I am using ssh certificates for authorization. No problem > there. I can do anything I want when I access the FBSD machine in this > manner, except run something like

Re: pf/ppp timing problem at startup

On Wed, 14 Feb 2007 07:27:02 +0100 cpghost <[EMAIL PROTECTED]> wrote: > There shouldn't be. Here there are. It's on a: > > FreeBSD 6.2-STABLE FreeBSD 6.2-STABLE #0: Tue Jan 16 14:45:10 CET > 2007 > > /etc/ppp/ppp.conf: > -- > > default: > set log Phase Chat LCP IPCP CCP tun c

Re: GMail [and other free email] and these lists?

On 13/02/07, Ted Mittelstaedt <[EMAIL PROTECTED]> wrote: - Original Message - From: "Gerard Seibert" <[EMAIL PROTECTED]> To: "User Questions" Sent: Monday, February 12, 2007 2:16 PM Subject: Re: GMail [and other free email] and these lists? > On Monday February 12, 2007 at 04:45:44 (

Re: GMail [and other free email] and these lists?

On 2/14/07, Jeff Rollin <[EMAIL PROTECTED]> wrote: I haven't yet found the perfect email service/client, though. Maybe I should post here when I do! A personal dedicated box with a dozen of webmail clients set up, accessible via IMAPv4 + mutt or whatever when you are tired of web?.. ___

Re: Dual boot problems (RESOLVED)

On Tue, 13 Feb 2007 19:46:18 -0800 Garrett Cooper <[EMAIL PROTECTED]> wrote: > RW wrote: > > On Tue, 13 Feb 2007 21:51:52 -0500 (EST) > > "Questions" <[EMAIL PROTECTED]> wrote: > > > >>> On Tue, 13 Feb 2007 20:44:03 -0500 (EST) > >>> "Questions" <[EMAIL PROTECTED]> wrote: > >>> > >>> > Howev

Re: kernel: vr0: discard oversize frame

On Wednesday 14 February 2007 06:23, sai wrote: > On 2/14/07, Josh Paetzel <[EMAIL PROTECTED]> wrote: > > I don't have any vr or rl cards, but see if you can increase the > > MTU on them. See the ifconfig manpage for details on how to do > > so. Obviously you'd want to set it to at least 1532. :)

Re: phpMyAdmin httpd segmentation fault

Terry, Just solved my php / roundcube problems by removing -funroll-loops from my CFLAGS in /etc/make.conf. Now I just have CFLAGS= -O2 -pipe Recollection: 5.2.0 -march=pentium3m -O2 -pipe -funroll-loops Fail 5.2.0 -march=pentium3 -O -pipe Success 5.2.1 -march=p

Re: NEED HELP

On 2/14/07, Ata ur Rehman Alvi <[EMAIL PROTECTED]> wrote: HELLO I NEED YOUR HELP REGARDING INSTALLING FREE BSD ON MY NEWLY BOUGHT PC. MY PC SPECS ARE P4 D 3.4GHZ, 1024MB DDR2 667 RAM, GIGABYTE MOTHER BOARD 945PL-S3, NX7300GT-TD256EH VIDEO CARD, SATA 250GB, 7200 RPM ( I DONT KNOW ITS SATA

Re: GMail [and other free email] and these lists?

On 14/02/07, Andrew Pantyukhin <[EMAIL PROTECTED]> wrote: On 2/14/07, Jeff Rollin <[EMAIL PROTECTED]> wrote: > I haven't yet found the perfect email service/client, > though. Maybe I should post here when I do! A personal dedicated box with a dozen of webmail clients set up, accessible via IMAPv

Re: GMail [and other free email] and these lists?

On 2/14/07, Christian Walther <[EMAIL PROTECTED]> wrote: On 14/02/07, Andrew Pantyukhin <[EMAIL PROTECTED]> wrote: > On 2/14/07, Jeff Rollin <[EMAIL PROTECTED]> wrote: > > I haven't yet found the perfect email service/client, > > though. Maybe I should post here when I do! > > A personal dedicate

Re: snd_eny24ht fails to build in kernel [WAS: Creative Sound Blaster X-Fi Xtreme Audio]

Alexander Leidinger wrote: Quoting "O. Hartmann" <[EMAIL PROTECTED]> (from Tue, 13 Feb 2007 14:57:56 +0100): All right, then the question shouldn't be lined up on snd_emu10kx, I saw that this type of soundcard utilize the CMedia CMI8738 chipset and there is already a driver called snd_cmi. The

Re: NEED HELP

Dak Ghatikachalam wrote: On 2/14/07, Ata ur Rehman Alvi <[EMAIL PROTECTED]> wrote: HELLO I NEED YOUR HELP REGARDING INSTALLING FREE BSD ON MY NEWLY BOUGHT PC. MY PC SPECS ARE P4 D 3.4GHZ, 1024MB DDR2 667 RAM, GIGABYTE MOTHER BOARD 945PL-S3, NX7300GT-TD256EH VIDEO CARD, SATA 250GB, 7200

Re: packet destination from pcap

Hi After i wrote the e-mail to the list i figured out how to get the ethernet destination address of the packet. I'm not sure but this might help me because i need to figure out if the packet is moving towards me or away from me on the interface i've chosen. So i can compare this with the eth

Re: Poll: What's the best audio player

-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Chris said the following on 13.02.2007 21:33: > What is the best audio (MP3/OGG/Etc) to use under Gnome? Audacious is a best for me. - -- Best regards, Simon Phoenix (Phoenix Lab.) - --- K

weird routing problem

My network looks like this: +--+ +--+ +-+ +--+ | Internet | <-> | Tiny | <-> | linksys | <-> | Behemoth | +--+ +--+ +-+ +--+ \ (WiFi)

Re: Very Annoying PHP Errors

Peter Pluta wrote: I recently upgraded to 5.2.1_1. After upgrading (or before not exactly sure) I began getting errors ALERT - canary mismatch on efree() - heap overflow detected in my Apache logs. That sounds a tad troubling, and is rather over my head. It does appear that some people beli

Re: Dual boot problems

Howdy, > Hello, > This weekend I purchased a laptop with a core2duo processor. The laptop > came with windows Vista premier. Due to some applications that I require, > removing Vista and installing FreeBSD is not an issue. (Please leave the > Vista/Microsoft flames at the door) > > When I install

Fwd: Poll: What's the best audio player

-- Forwarded message -- From: Jeff Rollin <[EMAIL PROTECTED]> Date: 14-Feb-2007 16:25 Subject: Re: Poll: What's the best audio player To: [EMAIL PROTECTED] On 13/02/07, Chris <[EMAIL PROTECTED]> wrote: What is the best audio (MP3/OGG/Etc) to use under Gnome? I don't use GNO

Re: How can I manually turn off the HDD?

I had heard the "automounter" could accomplish this as well when I was researching the same topic, but never got around to trying it (had major problems with a raid driver instead) Steve On 2/14/07, Daniel Rudy <[EMAIL PROTECTED]> wrote: At about the time of 2/13/2007 10:58 AM, Chuck Swiger stat

Re: Poll: What's the best audio player

On 2007/02/13 10:33, Chris seems to have typed: > What is the best audio (MP3/OGG/Etc) to use under Gnome? I use KDE and XFCE, but between MPlayer and XMMS, I much prefer XMMS for purely audio files. MPlayer is great for multimedia, but XMMS is better for purely audio in my opinion.

i have no share/xsl/docbook/slides/html/param.xsl

Need for slides. [EMAIL PROTECTED]> find /usr/local/share/xsl/docbook/ | grep param.xsl /usr/local/share/xsl/docbook/fo/param.xsl /usr/local/share/xsl/docbook/html/param.xsl /usr/local/share/xsl/docbook/manpages/param.xsl /usr/local/share/xsl/docbook/wordml/param.xsl /usr/local/share/xsl/docbook

Re: kernel: vr0: discard oversize frame

On 2/14/07, Jeffrey Goldberg <[EMAIL PROTECTED]> wrote: On Feb 14, 2007, at 6:23 AM, sai wrote: > mtu is currently 1500. "ifconfig vr0 mtu 1532" leaves the mtu > unchanged, but if I try to reduce it then it does work, > "ifconfig vr0 mtu 1498" sets mtu to 1498. Looks like that 1500 is > the

Re: GMail [and other free email] and these lists?

On 2/14/07, Andy Greenwood <[EMAIL PROTECTED]> wrote: I agree completely.I rolled a script that emails my bzipped log files to gmail too, so I can rotate them out sooner and save that much more space on my ancient PII. wow, PII these days.. is anybody still running on 486? :D but hey, gmail r

Re: Dual boot problems

On Wed, Feb 14, 2007 at 12:04:57PM -0500, Jeff Palmer wrote: > > Do you really need to use Grub to replace the FreeBSD MBR? > >I haven't had my hands on Vista yet - in no hurry either - > >but I think it should boot Vista OK. I've use it for several > >other MS versions from Win-95 - Win 2K - X

Cannot get freebsd up and running...

I first posted this on a FreeBSD help forum, where I was quicklyredirected here (I guess this is a serious issue...) I'm going to = copy/paste my post here: first off my hardware is: AMD 3800+ 1GB RAM NviDia 7900 GT OC gfx card DVDRW/CDRW drive ??? Hard drive with

Re: Mail server recomendations

J65nko wrote: [big snip] I use qmail using a combination of setup instructions from various sites like http://freebsdrocks.net www.lifewithqmail.org and applied the combined patch from http://qmail.jms1.net/ I am happy so far. The main thing is to build something that you understand and a

Re: Packet rate limiter

On 08/02/07, Peter N. M. Hansteen <[EMAIL PROTECTED]> wrote: Jan Sebosik <[EMAIL PROTECTED]> writes: > is there any way how to limit packet per second [PPS] rate to specified > IP (group of IP) ? The closest I can think of off the top of my head is defining a PF rule set with queues (ALTQ), how

Using newer version of pgp by default

Freebsd-6.2 I have both GnuPG v1.4.6 (FreeBSD) and versions 2.0.2 installed. I wanted to remove the older version; however, it seems that some programs depend on it. Both 'sylpheed', 'pine' and KMail insist on using the older version for pgp. How can I get them, and any other program that uses

hald/polkitd/dbus XFCE Auto-Mount Problems

When I plug in an external USB drive, unplug it without unmounting and then plug it back in the system reboots! I know that this is the wrong way to do things but I am surprised that the system totally blows up rather than spitting out an error or corrupting the external drive. Any ideas why

named: config filename (-c /var/named/etc/namedb/named.conf)

Hi, I am getting a little mixed up here. I am trying to place the proper switches in my rc.conf file so I can use the script from /etc/rc.d/named to start my named process. what do I have configured wrong? # grep named /etc/rc.conf named_enable="YES" named_program="/usr/local/sbin/named" n

python24 upgrade failed

hi, just csup ports and upgrade python24 but failed, here is the message: case $MAKEFLAGS in *-s*) CC='cc' LDSHARED='cc -shared -pthread' OPT='-DNDEBUG -O2 -fno-strict-aliasing -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x10' ./python -E ./setup.py -q build;; *) CC='cc' LDSHARED='cc

Re: named: config filename (-c /var/named/etc/namedb/named.conf)

On Feb 14, 2007, at 11:35 AM, Noah wrote: [ ... ] named_flags="-c /var/named/etc/namedb/named.conf" named_chrootdir="/var/named" here is the error from the script: # /etc/rc.d/named start Starting named. named: config filename (-c /var/named/etc/namedb/named.conf) contains chroot path (-t /va

Re: How does gmirror know of a faulty drive

No answers? I just actually replied to a thread about this. Apparently there is no automatic demotion of a device to DEGRADED. I just had a provider error for a good 5 minutes of SCSI kernel messages (bad sectors, grown defects), without any automatic corrective action taken by gmirror(4)

Re: Cannot get freebsd up and running...

Josh Makler wrote: I first posted this on a FreeBSD help forum, where I was quickly > redirected here (I guess this is a serious issue...) Well, I don't wish to offend, but if that message was formatted anything like this one, probably nobody at that forum wished to deal with it. Like it

Re: gmirror: degraded, Component ad4 (device gm0) broken, skipping.

gmirror insert gm0 ad4 The big question is: In your example, ad4 has already been "prepped" for use in as a component in the gmirror by ? Or will it just overwrite anything on ad4 regardless? ~BAS ___ freebsd-questions@freebsd.org mailing list

FBSD 6.2/i386 samba3 pdc ldap and idealx

Hi, i have followed the idealx tutorial to the letter, however i get this error when i try to start slapd: ambepdc# /usr/local/etc/rc.d/slapd start Starting slapd. /usr/local/etc/openldap/slapd.conf: line 74: index type "uidNumber" undefined this is my slapd.conf ambepdc# cat /usr/local/etc/open

Re: gmirror: degraded, Component ad4 (device gm0) broken, skipping.

On Wednesday 14 February 2007 15:13, Brian A. Seklecki wrote: > > gmirror insert gm0 ad4 > > The big question is: > > In your example, ad4 has already been "prepped" for use in as a component > in the gmirror by ? > > Or will it just overwrite anything on ad4 regardless? No prep is necessary w

Re: How does gmirror know of a faulty drive

On Wednesday 14 February 2007 15:10, Brian A. Seklecki wrote: > On Wed, 27 Jul 2005, Ivan Carey wrote: > > In FreeBSD 5.3 I have set up 2 drives in RAID-1 format. > > How will I know if one of the drives is faulty such as either not working > > or > > > > has some lost sectors? > > > > Is it possib

Idesk - trash icon

Hello, I installed Idesk to show differents icons on my desktop with Openbox 3 and FreeBSD 6.2. I have a file called trash.lnk with the content: table Icon Caption: Trash Icon: /home/olivier/.idesktop/icons/emptytrash.png Width: 48 Height: 48 X: 347 Y: 660 Command[0]: thun

Re: GMail [and other free email] and these lists?

On 2/14/07, Mike Fern <[EMAIL PROTECTED]> wrote: >On 2/14/07, Andy Greenwood <[EMAIL PROTECTED]> wrote: > > I agree completely.I rolled a script that emails my bzipped log files > to gmail too, so I can rotate them out sooner and save that much more > space on my ancient PII. > wow, PII these d

RAID 10-LUN Question

Hi Freebsd We have DELL/EMC CX-300 storage array hardware , Navisphere. , which consist of 15 Disks 320GB, I am planning to use this for Oracle( Linux) + SQL server(M$) purpose. We need to get that redundancy using RAID 10 and striple for the best performance. My thoughts are take most even

geom(4)/gmirror(4) automatic device DEGRADED status demotion (WAS:Re: gmirror HD failure detection)

On Wed, 14 Feb 2007, Brian A. Seklecki wrote: All: For a while our strategy was to use NRPE2+ a custom nagios check (check_raid_fbsdgmirror -- ugly-as-hell Perl, but which I can make available to the public). However, this morning a drive in a Dell PE1850 (one without a PERC4 controller)

RESOLVED: Connection timed out

Greg, Your email was very helpful. I isolated the freebsd box, and the win2K box on a LAN without connection to the upstream Cisco device, and all the connectivity problems went away. I'll be implementing the 'turn off STP' on those Cisco ports shortly. Many thanks, Matthew Greg Barniskis wrot

FTP Servers Down

Hello I am using the ports tree with the latest BSD release and for some reason if a package is tried to be downloaded from most the ftp.Freebsd.org servers and mirrors it fails. Is there a reason for this or an updated FTP list somewhere. Thanks, Eli -- BEGIN-ANTISPAM-VOTING-LINKS --

Re: Compile of Python 2.4.4 core dumps

Hi Niclas, On Wed, Feb 14, 2007 at 01:54:36PM +0100, Niclas Zeising wrote: > > Usually if a compile coredumps it's due to faulty memory or other > hardware. Might be good to check that first. Especially since it > worked flawlessly on another box. > HTH > //Niclas > Thanks for the reply. I'm un

RE: Newbie--new install on Core 2 Duo?

Yes GENERIC is SMP - Just installed a QX6700 worked ok from a SMP perspective -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andreas Rudisch Sent: 14 February 2007 08:55 To: Abdullah Ibn Hamad Al-Marri; Brian Cc: User Questions; Dr. Jennifer Nussbaum Sub

Re: Viewing on remote PC

On Wednesday February 14, 2007 at 08:02:38 (AM) Vince wrote: > White Hat wrote: [snip] > Windows != Xwindows and you need xwindows to display xwindows programs. > what you will need to do is either setup VNC server on your Freebsd > machine and access it via VNC to get a desktop (realvnc, tridia

origin of system message?

The following appears in /var/log/messages: Feb 14 17:03:50 jerusalem kernel: Connection attempt to UDP 209.6.203.219:1026 from 202.97.238.130:52821 presumably through the agency of syslog. What program/process issues this, and at what facility and level?

Re: FTP Servers Down

On 2/14/07, Elida Waggoner <[EMAIL PROTECTED]> wrote: Hello I am using the ports tree with the latest BSD release and for some reason if a package is tried to be downloaded from most the ftp.Freebsd.org servers and mirrors it fails. Is there a reason for this or an updated FTP list somewhere.

Re: RAID 10-LUN Question

RAID 10 uses even numbered drive sets, usually in 4's, so 4 drives, 8 drives, 12 drives, etc. Depending on how 24/7 self-managed you want the array, you should plan for at least 2 hot spare drives for fail over. So in your setup you could have one logical array made up of 12 drives, with 2 sp

geom(4)/gmirror(4) automatic device DEGRADED status promotion (WAS:Re: gmirror HD failure detection)

All: For a while our strategy was to use NRPE2+a custom nagios check (check_raid_fbsdgmirror -- ugly as hell Perl but which I can make available to the public). However, this morning a drive in a Dell PE1850 (one without a PERC4 controller) started erroring. It has just regular old (bad) m

Re: origin of system message?

Oliver Koch writes: > > Feb 14 17:03:50 jerusalem kernel: Connection attempt to UDP > 209.6.203.219:1026 from 202.97.238.130:52821 > > > >What program/process issues this, and at what facility and > > level? > > please check if these two sysctl values are set: > > net.inet.tcp.log_

Re: origin of system message?

Hello, Robert Huff schrieb: > The following appears in /var/log/messages: > > Feb 14 17:03:50 jerusalem kernel: Connection attempt to UDP > 209.6.203.219:1026 from 202.97.238.130:52821 > > presumably through the agency of syslog. > What program/process issues this, and at wha

Pure-ftpd with Mysql, where is the database?

Hi people. I'm testing pure-ftpd from FreeBSD 6.2, i want to test with MySQL 4.1which already is running, i read the docs from the site but didn't see anything about how pure-ftp authenticated users from Mysql. My both servers are running but, where is the PureFTPD database inf MySQL? Rea

Re: origin of system message?

On 2/14/07, Robert Huff <[EMAIL PROTECTED]> wrote: Oliver Koch writes: > > Feb 14 17:03:50 jerusalem kernel: Connection attempt to UDP 209.6.203.219:1026 from 202.97.238.130:52821 > > > >What program/process issues this, and at what facility and > > level? > > please check if these two

Re: Pure-ftpd with Mysql, where is the database?

On 2007/02/14 13:50, perikillo seems to have typed: >Hi people. > >I'm testing pure-ftpd from FreeBSD 6.2, i want to test with MySQL > 4.1which already is running, i read the docs from the site but didn't > see > anything about how pure-ftp authenticated users from Mysql. My both > serve

Re: origin of system message?

pete wright writes: > > > > Feb 14 17:03:50 jerusalem kernel: Connection attempt to UDP > 209.6.203.219:1026 from 202.97.238.130:52821 > > > > > > > >What program/process issues this, and at what facility and > > > > level? > > I don't want to stop the messages, merely re-di

RE: Very Annoying PHP Errors

I couldn't get error logging to work correctly - I had error_reporting commented out, and display_errors = On I also added error_reporting(E_ALL); to my header file and the page was just blank... What I did was downgraded the php port to 5.2.0 and just re-compiled php and all of it's extensions

Program / Command global

Hi there, I just installed screen, very handy. But when I goto use it I have to call /usr/local/bin/screen how can I set it so I can just type screen ? Thanks :-) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/

Re: Program / Command global

On Thu, Feb 15, 2007 at 12:28:02PM +1300, RawDevelopment wrote: > Hi there, > > I just installed screen, very handy. But when I goto use it I have to call > /usr/local/bin/screen > > how can I set it so I can just type > screen > ? Make sure /usr/local/bin is in your path. eg set you path in y

Re: Viewing on remote PC

Why don't you try tight vnc for this(server running vnc and WinXpee running vnc client. http://www.tightvnc.com/ PuTTY (the Telnet and SSH client itself) * PSCP (an SCP client, i.e. command-line secure file copy) * PSFTP (an SFTP client, i.e. general file transfer sessions much

Re: Visit our store http://www.jayashop.name/store/

Jayashop (http://www.jayashop.name/store/) Has been serving global market since 2005. Through all these years our goal has been to deserve the trust of our customers. To do this we knew we must offer competitive pricing, but we also knew low prices alone could not make our business superior.

Ksh Shell script security question.

Hi Freebsd I am am puzzled how to secure this code when this shell script is being executed. ${ORACLE_HOME}/bin/sqlplus -s

serious performance problems with 6.2 Release

Greetings, We are having some bizarre performance problems on a freshly installed 6.2 Release server. This is a supermicro superserver 6022c dual 2.0 Xeon with 2GB RAM. These CPUs do support hyperthreading. We have done significant testing with both hyperthreading turned on and off in the bio

Any way to probe snd card?

I'm pretty stunned at how well gnome2 works on my antique 400MHz backup system. [[ gnome2-lite wouldn't go, for some reason [?] ]] Anyway, I do have a sound card in this one, but which *.ko I load or compile is the question. If memory serves, I think

Re: origin of system message?

On 2/14/07, Robert Huff <[EMAIL PROTECTED]> wrote: pete wright writes: > > > > Feb 14 17:03:50 jerusalem kernel: Connection attempt to UDP 209.6.203.219:1026 from 202.97.238.130:52821 > > > > > > > >What program/process issues this, and at what facility and > > > > level? > >

RE: Cannot get freebsd up and running...

Message: 1 Date: Wed, 14 Feb 2007 08:47:46 -0800 From: Josh Makler <[EMAIL PROTECTED]> Subject: Cannot get freebsd up and running... To: freebsd-questions@freebsd.org Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="US-ASCII" <-- snip --> > ACPI-0213: *** Error:AE_BAD_CHAR

Re: phpMyAdmin httpd segmentation fault

I've just had the phpMyAdmin not starting problem after making changes to php.ini and adding extensions. It began as a segmentation fault with only phpMyAdmin and then progressed, as I fiddled with config for php4-extensions, to breaking php entirely. I too have a modded make.conf file which I am a

Re: Any way to probe snd card?

Gary Kline wrote: I'm pretty stunned at how well gnome2 works on my antique 400MHz backup system. [[ gnome2-lite wouldn't go, for some reason [?] ]] Anyway, I do have a sound card in this one, but which *.ko I load or compile is the question. If memory serves, I

Re: A bit of a silly question - but I am desperate

Thomas Sparrevohn wrote: Hi My old trusty FreeBSD server just died and naturally that happened days before the new machine arrived - fortunately I did not lose too much data - however I did lose my settings and that my problem Using a ADSL router with NAT and firewall settings (Open on http/ht

Re: Any way to probe snd card?

On Wed, Feb 14, 2007 at 06:38:14PM -0800, Garrett Cooper wrote: > Gary Kline wrote: > > I'm pretty stunned at how well gnome2 works on my > > antique 400MHz backup system. [[ gnome2-lite wouldn't go, for > > some reason [?] ]] Anyway, I do have a sound card in this > > one, bu

Re: Any way to probe snd card?

On 2/14/07, Gary Kline <[EMAIL PROTECTED]> wrote: I'm pretty stunned at how well gnome2 works on my antique 400MHz backup system. [[ gnome2-lite wouldn't go, for some reason [?] ]] Anyway, I do have a sound card in this one, but which *.ko I load or compile

Re: RAID 10-LUN Question

At 02:54 PM 2/14/2007, Dak Ghatikachalam wrote: Hi Freebsd We have DELL/EMC CX-300 storage array hardware , Navisphere. , which consist of 15 Disks 320GB, I am planning to use this for Oracle( Linux) + SQL server(M$) purpose. We need to get that redundancy using RAID 10 and striple for the b

Automatic rsh login to BSD Box

Hi I have 2 BSD boxes, want to acheive automatic rsh login from one BSD box to other. I tried placing host name of the boxes in .rhosts file of the boxes under ~root directory. This works fine with user account and I am able to remotely execute commands on the other box with rsh. Eg: == rs

Question about syscon

Whenever I start the FreeBSD, it takes about one minutes to get the "syscon" service ready. Is there any way to speed up the process of start-up? -- Ronggui Huang Department of Sociology Fudan University, Shanghai, China ___ freebsd-questions@freebsd.or

  1   2   >