ОСЕНЬ - ЛУЧШЕЕ ВРЕМЯ для СОЗДАНИЯ ГАЗОНОВ
наши травосмеси:
АНГЛИЙСКИЙ газон
МАВРИТАНСКИЙ газон
ПАРТЕРНЫЙ газон
ПАРК-ЭЛИТ ЗАСУХОУСТОЙЧИВЫЙ
ЛУГОВОЙ газон
СПОРТ-ИГРА
ТЕНЕВОЙ газо
Date: Wed Sep 20 10:25:57 2006
NOTIFICATION start
This email was scanned for viruses by ServGate EdgeForce security gateway.
[Original Message Header]
From: [EMAIL PROTECTED]
Subject: rmkjnw
[Detail]
The following action has been applied to the below attachments:
Attac
Hi,
While making my pf.conf, I wanted to match all my FreeBSD boxes in one rules
and subnet independent.
I've done this by using pf's OS fingerprinting and it worked well since 6.X
releases...
The problem is that pf.os doesn't include sets of fingerprint for the latest
FreeBSD
Releases,
I've been looking at the Sun Ray terminals and like the idea of using thin
clients to connect to the main server to run apps. Are they any programms in
thr ports which allow a similar set-up using FreeBSD. I know you can do this
with X but would need a tutorial to help me through it.
Anyone had
On 19 Sep 2006, at 14:47, Stephanie Bridges wrote:
Ashley,
This is quite doable, and winbindd isn't broken on FreeBSD. It
took me a
bit to figure out how to make it work correctly, however. I have a
FBSD
system here that authenticates to our university AD server, and allows
access based
Hi,
I have been recieving over the past month this crap e-mail with a story
attatched.Am a bit concerned how i am getting it and could you tell me how to
stop it.
Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/lis
[secure_msg_ctr_header.gif]
[chase_online.gif]
[chaseNew.gif]
Dear Chase Customer,
For the User Agreement, Section 9, we may immediately issue a
warning, temporarily suspend, indefinitely suspend or terminate your
membershi
[secure_msg_ctr_header.gif]
[chase_online.gif]
[chaseNew.gif]
Dear Chase Customer,
For the User Agreement, Section 9, we may immediately issue a
warning, temporarily suspend, indefinitely suspend or terminate your
membershi
PYAT' SHAGOV PO PRIOBRETENIYU OFFSHORNOJ KOMPANII.
SHag 1. Konsul'taciya.
Poluchite konsul'taciyu u nashih specialistov i uznajte bol'she o
vashih vozmozhnostyah.
SHag 2. Registraciya predp
Please read the document.
Attachment: No Virus found
Norman AntiVirus - www.norman.com
Kerio WinRoute Firewall email scanner found a virus in the following attachment:
Name: website.txt.pif
Content type: application/octet-stream
Additional information from antivirus:
po44u90ugjidßk9z5894z0
Kerio WinRoute Firewall email scanner found a virus in the following attachment:
Name: id43342.zip
Content type: application/octet-stream
Additional information from antivirus: McAfee verdict: W32/[EMAIL PROTECTED]
The attachment has been removed
Dan Mahoney, System Admin wrote:
On Tue, 19 Sep 2006, Erik Norgaard wrote:
Along with some good advice. First of all: ssh is not a public service
like http or smtp where you need anyone to be able to connect. So
don't let them in the first place.
It is in this case. It's a web server that a
[Format recovered--see http://www.lemis.com/email/email-format.html]
Single line message
On Wednesday, 20 September 2006 at 9:37:15 +0100, jackie Predeth wrote:
>
> I have been recieving over the past month this crap e-mail with a
> story attatched.Am a bit concerned how i am getting it and coul
Dear friends,
I have a pentium 4 freebsd 6.1 server connected to my
office win-xp lan. The server smoothly runs sshd, postgresql, samba (to
connect some /home share and the office win filesystem), vncserver.
Recently I added the following IPFW firewall (I'm an absolute beginner
with it) which
Hi
VIAzzGRA
VALzzIUM
CIAzzLIS
AMBzzIEN
Directly from the manufacturer http://www.vedunherwinkase.com
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMA
On Wed, 20 Sep 2006 11:07:16 +0100 (GMT+01:00)
Vittorio <[EMAIL PROTECTED]> wrote:
> Dear friends,
> I have a pentium 4 freebsd 6.1 server connected to my
> office win-xp lan. The server smoothly runs sshd, postgresql, samba (to
> connect some /home share and the office win filesystem), vncserve
On Wed, 20 Sep 2006 20:12:18 +1000
Nick Withers <[EMAIL PROTECTED]> wrote:
> On Wed, 20 Sep 2006 11:07:16 +0100 (GMT+01:00)
> Vittorio <[EMAIL PROTECTED]> wrote:
>
> > Dear friends,
> > I have a pentium 4 freebsd 6.1 server connected to my
> > office win-xp lan. The server smoothly runs sshd, po
Hi:
I am using cu to connect to a device on a serial port (/dev/cuaa0)
How do I setup the option to "capture output to a file" ?
Thanks in advance.
thanks
Saifi.
TWINCLING Society
http://www.twincling.org/
___
freebsd-questions@freebsd.org mailing
Hello Joao,
Tuesday, September 19, 2006, 11:12:37 PM, you wrote:
> On 9/19/06, Dan Mahoney, System Admin <[EMAIL PROTECTED]> wrote:
>> Hey all,
>>
>> I've looked around and found several linux-centric things designed to
>> block brute-force SSH attempts. Anyone out there know of something a bit
¿Quieres estudiar en el exterior?
No pierdas esta opor
¿Quieres estudiar en el exterior?
No pierdas esta opor
Sorry for double-post,
I've found the solution of my problem by adding theses lines to pf.os:
65535:64:1:64:M*,N,W1,N,N,T,S: FreeBSD:6.x-4::FreeBSD 6.x (1)
65535:64:1:64:M*,N,W0,N,N,T,S: FreeBSD:6.x-2::FreeBSD 6.x (2)
65535:64:1:64:M*,N,N,S,N,W1,N,N,T: FreeBSD:5.4::FreeBSD 5.4
R
Hi
Just a general question about the ports for freebsd. I am now running
6.1 on amd64. Got most of what I need, but noticed that some ports are
only i386 - like the flock browser and skype. Obviously I can live
without these but was just wondering if there is a place I could check
to see wheth
On Tuesday 19 September 2006 18:24, Norberto Meijome wrote:
> hi there :)
> I was planning to migrate a 4.11 firewall using a combo of ipf/ipnat and
> ipfw pipe/dummynets to pf + ALTQ.
pf/ipf/ipfw & dummynet/ALTQ are available since 5.3-R if I recall correctly.
> One thing I haven't figured out h
eoghan wrote:
Hi
Just a general question about the ports for freebsd. I am now running
6.1 on amd64. Got most of what I need, but noticed that some ports are
only i386 - like the flock browser and skype. Obviously I can live
without these but was just wondering if there is a place I could che
Wilfred Alberto (Lottery Director) wrote:
INTERNATIONAL PROMOTION/PRIZE AWARD DEPT.
CALLE GRANVIA 32N 1C MADRID SPAIN
REF: RSSL/61-ILGI0509/45
BATCH:RSSL/15/096/WRCS
DATE:20/09/2006
Dear Winner,
AWARD NOTIFICATION FINAL NOTICE
This is to inform you of the release of the Royal Spainish
I am working on using FreeBSD while I rebuild my system after recently
buying an amd64 CPU. I hope that I can eventually swap out my (i386)
Debian installation with FreeBSD.
My /home is mounted from a Debian NFS server. (This is the network at
home so security is not paramount).
User and Group ID
Hi List,
recently (last few days) a lot of spam has begun to arrive on this list
could anyone concerned ([EMAIL PROTECTED], ...) check/upgrade the filters?
Thanx
--
Pietro Cerutti
ICQ: 117293691
PGP: 0x9571F78E
- ASCII Ribbon Campaign -
against HTML e-mail and
proprietary attachments
www.
I've been looking at the Sun Ray terminals and like the idea of using thin
clients to connect to the main server to run apps. Are they any programms in
thr ports which allow a similar set-up using FreeBSD. I know you can do this
with X but would need a tutorial to help me through it.
Anyone had
Mensagem não autorizada
Vírus encontrado no email de entrada
Found the W32/[EMAIL PROTECTED] virus !!!
Para: [EMAIL PROTECTED]
Assunto: robos!
___
freebsd-ques
On Wed, 20 Sep 2006 14:20:19 +0300
Nikos Vassiliadis <[EMAIL PROTECTED]> wrote:
> On Tuesday 19 September 2006 18:24, Norberto Meijome wrote:
> > hi there :)
> > I was planning to migrate a 4.11 firewall using a combo of ipf/ipnat and
> > ipfw pipe/dummynets to pf + ALTQ.
>
> pf/ipf/ipfw & dummyn
PYAT' SHAGOV PO PRIOBRETENIYU OFFSHORNOJ KOMPANII.
SHag 1. Konsul'taciya.
Poluchite konsul'taciyu u nashih specialistov i uznajte bol'she o
vashih vozmozhnostyah.
SHag 2. Registraciya predp
I recently tried to send a PR (for an updated port), and got the following
response:
--- 8<---
This is a canned auto-reply to your recent email to the bug submission
address.
Your message has been identified as likely spam and has been discarded.
If you feel this is an error, ple
Robert Davison wrote:
I've been looking at the Sun Ray terminals and like the idea of using thin
clients to connect to the main server to run apps. Are they any programms in
thr ports which allow a similar set-up using FreeBSD. I know you can do this
with X but would need a tutorial to help me
On Wednesday 20 September 2006 15:50, Norberto Meijome wrote:
> gotcha, so i may end up using 2 firewalls anyway... :-) I think I may go
> with ipfw and dummynet to keep it to one set I'll have to read on some
> comparisons before making up my mind...
Perhaps you can combine ipfw/dummynet and
Hi guys,
I'm using FBSD6.0. I've done the latest cvsup on the ports, installed
apache 2.0.59 and mod_perl 2.0.2,3 and and trying to install
libapreq2-2.0.08.
Halfway through the compilation, I get this error:
cc -shared .libs/util.o .libs/version.o .libs/cookie.o .libs/param.o
.libs/parser.
Foo JH wrote:
> Hi guys,
>
> I'm using FBSD6.0. I've done the latest cvsup on the ports, installed
> apache 2.0.59 and mod_perl 2.0.2,3 and and trying to install
> libapreq2-2.0.08.
Unfortunately its something in your local setup. I do the FAMP stack ports
compile almost daily.
> cc -shared .l
Joao Barros wrote:
On 9/19/06, Dan Mahoney, System Admin <[EMAIL PROTECTED]> wrote:
Hey all,
I've looked around and found several linux-centric things designed to
block brute-force SSH attempts. Anyone out there know of something a
bit
more BSD savvy?
My best attempt will be to get this:
h
I have one system that also has an Nvidia video, after I update ports will
crash if I don't rebuild the nvidia driver and X screensaver The
screensaver makes it crash otherwise.
-Derek
At 06:33 PM 9/19/2006, Laurence Sanford wrote:
So I got up and walked away from my computer this af
Elijah Savage wrote:
> Joao Barros wrote:
>> On 9/19/06, Dan Mahoney, System Admin <[EMAIL PROTECTED]> wrote:
>>> Hey all,
>>>
>>> I've looked around and found several linux-centric things designed to
>>> block brute-force SSH attempts. Anyone out there know of something a
>>> bit
>>> more BSD sav
Hi All,
I am running FreeBSD 5.4 and have recently received the following message on
our box for the /var partiton.
No inodes left.
I have checked the statistics and there was an apache httpd log which was
maxing out the usable space. I have since removed this file and the available
space has
On Tue, Sep 19, 2006 at 05:59:03PM -0700, jekillen wrote:
>
> On Sep 18, 2006, at 7:43 PM, Jerry McAllister wrote:
>
> >On Mon, Sep 18, 2006 at 07:34:09PM -0700, jekillen wrote:
> >
> >>Hello;
> >>Since I have been advised by way of correspondence with UUASC (Unix
> >>Users of Association of So
On Wed, 20 Sep 2006 15:54:39 +0100
"Philip Radford" <[EMAIL PROTECTED]> wrote:
> I am running FreeBSD 5.4 and have recently received the following
> message on our box for the /var partiton. No inodes left.
>
> I have checked the statistics and there was an apache httpd log which
> was maxing out
Hiya,
Since freebsd-ipfw is "dead" and mostly for spammers, let me try my luck
here once more ;)
I am trying to prove a point to a customer - that he can save the cost
of expensive routing hardware by just having a FreeBSD box on their LAN.
Unfortunately, this also means that I need to spend day
In response to "Philip Radford" <[EMAIL PROTECTED]>:
> Hi All,
>
> I am running FreeBSD 5.4 and have recently received the following message on
> our box for the /var partiton.
> No inodes left.
>
> I have checked the statistics and there was an apache httpd log which was
> maxing out the usab
In response to albi <[EMAIL PROTECTED]>:
> On Wed, 20 Sep 2006 15:54:39 +0100
> "Philip Radford" <[EMAIL PROTECTED]> wrote:
>
> > I am running FreeBSD 5.4 and have recently received the following
> > message on our box for the /var partiton. No inodes left.
> >
> > I have checked the statistics
It may be the modem needs to be rest as someone else called into it. I
always save any modem settings to nvram on the modem so if it is reset the
settings are correct.
-Derek
At 08:45 PM 9/19/2006, Geeta Nagpal wrote:
Dear Problem Solver,
Greetings from Singapore J
I have had a
In response to Odhiambo Washington <[EMAIL PROTECTED]>:
[snip]
> The scenario:
>
> I am running a FreeBSD 5.x box with IPFilter/IPNAT. The box has two
> interfaces at the moment, external interface connected to the hostile
> Internet and internal interface connected to a switch for the LAN.
>
Odhiambo Washington wrote:
I need to control bandwidth on the external interface only, not on the
LAN (internal interfaces).
Is this rightful thinking or sheer imagination which is not practical?
If you're happy with IPFilter and need to ensure minimum bandwidth for
some network segment, tak
Philip Radford wrote:
Hi All,
I am running FreeBSD 5.4 and have recently received the following message on
our box for the /var partiton.
No inodes left.
I have checked the statistics and there was an apache httpd log which was
maxing out the usable space. I have since removed this file and
* On 20/09/06 11:16 -0400, Bill Moran wrote:
| In response to Odhiambo Washington <[EMAIL PROTECTED]>:
|
| [snip]
|
| > The scenario:
| >
| > I am running a FreeBSD 5.x box with IPFilter/IPNAT. The box has two
| > interfaces at the moment, external interface connected to the hostile
| > Interne
Elijah Savage wrote:
another vote for denyhost. it works well and stops the attacks. Even tho
i use keys and not passwords, i still use it.
just a DITTO great piece of soft!
--
Pietro Cerutti
ICQ: 117293691
PGP: 0x9571F78E
- ASCII Ribbon Campaign -
against HTML e-mail and
proprietary attac
Elijah Savage wrote:
Joao Barros wrote:
I'm using BruteForceBlocker quite successfully.
I take the opportunity to thank danger for it :-)
http://www.freshports.org/security/bruteforceblocker/
I use /usr/ports/security/denyhost
It was very easy to install and setup the config file is commente
* On 20/09/06 17:16 +0200, Erik Norgaard wrote:
| Odhiambo Washington wrote:
|
| >I need to control bandwidth on the external interface only, not on the
| >LAN (internal interfaces).
| >
| >Is this rightful thinking or sheer imagination which is not practical?
|
| If you're happy with IPFilter an
In response to Odhiambo Washington <[EMAIL PROTECTED]>:
> * On 20/09/06 11:16 -0400, Bill Moran wrote:
> | In response to Odhiambo Washington <[EMAIL PROTECTED]>:
> |
> | [snip]
> |
> | > The scenario:
> | >
> | > I am running a FreeBSD 5.x box with IPFilter/IPNAT. The box has two
> | > interf
Thomas Sandford wrote:
> I recently tried to send a PR (for an updated port), and got the
> following response:
>
> --- 8<---
> This is a canned auto-reply to your recent email to the bug submission
> address.
>
> Your message has been identified as likely spam and has been discarded
It's time to upgrade my old Cisco 10Mbps router and I am seriously
considering using FreeBSD. I have found some solutions and wonder what
one would recommend here on the list...
Solution 1: http://tomclegg.net/256-router
Solution 2: http://m0n0.ch/wall/index.php
I want to duplicate my Cisco se
Robert Fitzpatrick skrev:
It's time to upgrade my old Cisco 10Mbps router and I am seriously
considering using FreeBSD. I have found some solutions and wonder what
one would recommend here on the list...
Solution 1: http://tomclegg.net/256-router
Solution 2: http://m0n0.ch/wall/index.php
pfS
On Wed, 20 Sep 2006, Erik Norgaard wrote:
Dan Mahoney, System Admin wrote:
On Tue, 19 Sep 2006, Erik Norgaard wrote:
Along with some good advice. First of all: ssh is not a public service
like http or smtp where you need anyone to be able to connect. So don't
let them in the first place.
I
After using Dru Lavigne's excellent article http://tinyurl.com/da66a about
Raid-1 I have a full Raid-1 mirror on a new rack server. I'm wondering if anyone
can tell me how best to monitor the hardware status to detect imminent failure
of one of the disks? Do I use something like smartctl in a cr
On Sep 20, 2006, at 4:19 AM, eoghan wrote:
Just a general question about the ports for freebsd. I am now
running 6.1 on amd64. Got most of what I need, but noticed that
some ports are only i386 - like the flock browser and skype.
Obviously I can live without these but was just wondering if t
On 9/20/06, Robin Becker <[EMAIL PROTECTED]> wrote:
After using Dru Lavigne's excellent article http://tinyurl.com/da66a about
Raid-1 I have a full Raid-1 mirror on a new rack server. I'm wondering if
anyone
can tell me how best to monitor the hardware status to detect imminent
failure
of one of
--- "Dan Mahoney, System Admin" <[EMAIL PROTECTED]>
wrote:
> On Tue, 19 Sep 2006, backyard wrote:
>
> > In reality using passwords with SSH kinda defeats
> the
> > purpose of SSH.
>
> Keeping passwords from being sent across the network
> as cleartext?
>
> -Dan
ssh will encrypt them of cours
Here's the situation, I have 3 BSD servers sitting behind a pfsense
firewall. When I run portmanager on any of the 3 servers, inevitably it
runs into a distfile that can't be downloaded from an FTP site.
Although I haven't checked the log files on the firewall, I'm fairly
positive this is an a
Hi,
I've got smartd going on a gmirror system, however when smartd starts up
it says it can't find the various drives. I've tried both the autodetection
line as well as specifying the individual drives. If this does work i'd like
to know about it as i believe i might have one failing drive,
Robin Becker wrote:
After using Dru Lavigne's excellent article http://tinyurl.com/da66a
about Raid-1 I have a full Raid-1 mirror on a new rack server. I'm
wondering if anyone can tell me how best to monitor the hardware
status to detect imminent failure of one of the disks? Do I use
somethin
Dave wrote:
Hi,
I've got smartd going on a gmirror system, however when smartd starts
up it says it can't find the various drives. I've tried both the
autodetection line as well as specifying the individual drives. If this
does work i'd like to know about it as i believe i might have one
f
Peter N. M. Hansteen wrote:
Noah <[EMAIL PROTECTED]> writes:
Any clues if a system like this is a already coded and out there somewhere?
Apart from the ipfw reqirement, you have just described authpf, see eg
http://www.freebsd.org/cgi/man.cgi?query=authpf&apropos=0&sektion=0&manpath=
On Wednesday 20 September 2006 18:13, Greg Groth wrote:
> Here's the situation, I have 3 BSD servers sitting behind a pfsense
> firewall. When I run portmanager on any of the 3 servers, inevitably it
> runs into a distfile that can't be downloaded from an FTP site.
> Although I haven't checked the
What does "make -V FETCH_CMD" say? The default is "fetch -ApRr" where -p means
passive.
/usr/bin/fetch -ARr
Best regards,
Greg Groth
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscr
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Philip Radford
Sent: Wednesday, September 20, 2006 7:55 AM
To: freebsd-questions@freebsd.org
Subject: FreeBSD 5.4 no inodes left
Hi All,
I am running FreeBSD 5.4 and have recently received the following
me
pkg_info provides a nice listing of package names that
include version numbers. I'd like to have a list of
the names without the version numbers so that I can
write a script to install the newer versions after a
clean installation.
Looking at the package names, I'm having a hard time
coming up wi
Does anyone know of any tutorials for running FreeNX
and NX on FreeBSD?
Thanks,
Andrew L. Gould
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED
On Wednesday 20 September 2006 19:45, Andrew Gould wrote:
> pkg_info provides a nice listing of package names that
> include version numbers. I'd like to have a list of
> the names without the version numbers so that I can
> write a script to install the newer versions after a
> clean installation
On Mon, 18 Sep 2006, [EMAIL PROTECTED] wrote:
On Tue, 19 Sep 2006, Jonathan Chen wrote:
On Mon, Sep 18, 2006 at 03:16:26PM -0400, [EMAIL PROTECTED] wrote:
Has anyone configure imap-uw to accept plaintext passwords? The options listed
in the doumentation do not work. I have tried various combi
On Wednesday 20 September 2006 19:07, Greg Groth wrote:
> > What does "make -V FETCH_CMD" say? The default is "fetch -ApRr" where -p
> > means passive.
>
> /usr/bin/fetch -ARr
Check that you don't have this defined in the environment, or make.conf.
Updating your ports tree should bring in the new
Thanks.
--- RW <[EMAIL PROTECTED]> wrote:
> On Wednesday 20 September 2006 19:45, Andrew Gould
> wrote:
> > pkg_info provides a nice listing of package names
> that
> > include version numbers. I'd like to have a list
> of
> > the names without the version numbers so that I
> can
> > write a scr
On 2006 Sep 19 , at 10:38, Jeff Cross wrote:
Adam Martin wrote:
On 2006 Sep 18 , at 17:39, Jeff Cross wrote:
Adam Martin wrote:
On 2006 Sep 18 , at 16:25, Jeff Cross wrote:
I am trying to run FreeBSD 6.1-RELEASE on a Dell PowerEdge 850 with
some
booting issues. I have searched the arch
On Wed, Sep 20, 2006 at 08:12:22PM +0100, RW wrote:
> On Wednesday 20 September 2006 19:45, Andrew Gould wrote:
> > pkg_info provides a nice listing of package names that
> > include version numbers. I'd like to have a list of
> > the names without the version numbers so that I can
> > write a scr
On 2006 Sep 20 , at 08:28, Pietro Cerutti wrote:
Hi List,
recently (last few days) a lot of spam has begun to arrive on this
list
could anyone concerned ([EMAIL PROTECTED], ...) check/upgrade the
filters?
Incidentally I'm subscribed to about a dozen other FreeBSD mailing
lists. It's
On 20 Sep 2006, at 17:51, Chuck Swiger wrote:
On Sep 20, 2006, at 4:19 AM, eoghan wrote:
Just a general question about the ports for freebsd. I am now
running 6.1 on amd64. Got most of what I need, but noticed that
some ports are only i386 - like the flock browser and skype.
Obviously I ca
Noah <[EMAIL PROTECTED]> writes:
> authpf needs ssh access which is not something we have universally
> open - is there a way to integrate authpf without granting ssh
> access?
Out of the box, no. Then again, you only need ssh in to the
authenticating gateway. It's up to you to decide which Op
On Wed, Sep 20, 2006 at 03:52:41PM -0400, Adam Martin wrote:
>
> On 2006 Sep 20 , at 08:28, Pietro Cerutti wrote:
>
> >Hi List,
> >recently (last few days) a lot of spam has begun to arrive on this
> >list
> >could anyone concerned ([EMAIL PROTECTED], ...) check/upgrade the
> >filters?
>
>
On Wed, Sep 20, 2006, Adam Martin wrote:
>
>On 2006 Sep 20 , at 08:28, Pietro Cerutti wrote:
>
>>Hi List,
>>recently (last few days) a lot of spam has begun to arrive on this
>>list
>>could anyone concerned ([EMAIL PROTECTED], ...) check/upgrade the
>>filters?
>
> Incidentally I'm subsc
You can easily do the Freebsd firewall just by following the FBSD handbook
or go to http://mostgraveconcern.com/freebsd/
and look at the article on "Setting up a network gateway"
--
Brent Bailey CCNA
Bmyster LLC
Computer Networking and Webhosting
Network & Sytems Engineer, President
[EMAIL PRO
On 2006 Sep 19 , at 17:25, Nicolas Blais wrote:
On Tuesday 19 September 2006 17:12, Joao Barros wrote:
On 9/19/06, Dan Mahoney, System Admin <[EMAIL PROTECTED]> wrote:
Hey all,
I've looked around and found several linux-centric things designed to
block brute-force SSH attempts. Anyone out t
Hi,
are there any issues known with the FastTrak100 RAID-Controller? I'd like to
run it in HW RAID-1 and setup FreeBSD 6.1 onto that RAID-Volume.
Thx in advance, cheers
-Martin-
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/
Hi,
I'm trying to set up maildrop to act as virtual transport for my hosted
domains to configure maildrop to deliver spam-mail into the users INBOX.spam
IMAP folder.
In main.cf I set virtual_transport=maildrop and of course
virtual_mailbox_maps (works with the default postfix mda).
Trying this w
On Wed, Sep 20, 2006 at 11:14:38AM -0700, Alex Franks wrote:
>
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Philip Radford
> Sent: Wednesday, September 20, 2006 7:55 AM
> To: freebsd-questions@freebsd.org
> Subject: FreeBSD 5.4 no inodes left
Hi,
I'm trying to set up maildrop to act as virtual transport for my hosted
domains to configure maildrop to deliver spam-mail into the users INBOX.spam
IMAP folder.
In main.cf I set virtual_transport=maildrop and of course
virtual_mailbox_maps (works with the default postfix mda).
Trying this w
Hi,
I'm trying to set up maildrop to act as virtual transport for my hosted
domains to configure maildrop to deliver spam-mail into the users INBOX.spam
IMAP folder.
In main.cf I set virtual_transport=maildrop and of course
virtual_mailbox_maps (works with the default postfix mda).
Trying this w
Hi, i've got a Windows XP pro computer with two drives. Ones a 80gb
western digital raptor, and the other is a 7200.10 seagate 320gb drive.
The 320 gb drive has two partitionsone thats 29.5 gb and is in
fat32 mode (i'm hoping to use it for freebsd) and then the rest is for
my media. My b
On Wed, 20 Sep 2006 22:07:36 +0200
"Martin Werner" <[EMAIL PROTECTED]> wrote:
> I'm trying to set up maildrop to act as virtual transport for my
> hosted domains to configure maildrop to deliver spam-mail into the
> users INBOX.spam IMAP folder.
>
> In main.cf I set virtual_transport=maildrop and
>
> Hi,
>
> are there any issues known with the FastTrak100
> RAID-Controller? I'd like to run it in HW RAID-1 and setup
> FreeBSD 6.1 onto that RAID-Volume.
>
> Thx in advance, cheers
> -Martin-
>
Have a server running it for couple of months so far with no issues (knock on
the wood)
Ta
Hi everybody,
I recently install freebsd 5.4, bind9, isc-dhcp-server, openldap on my
machine.
DNS server is working oke, but since I'm running ipfw firewall on the
machine, my windows client (internet Explorer kan reach my
freeBsd webserver.
can anyone tell me wich protocol and port I have to
On Wed, September 20, 2006 10:43 pm, albi wrote:
> On Wed, 20 Sep 2006 22:07:36 +0200
> "Martin Werner" <[EMAIL PROTECTED]> wrote:
>
>> I'm trying to set up maildrop to act as virtual transport for my
>> hosted domains to configure maildrop to deliver spam-mail into the
>> users INBOX.spam IMAP fol
Does the second drive show up correctly in your BIOS? Or are you using a
device driver to use the drive with windows?
-Derek
At 03:42 PM 9/20/2006, Brett McLain wrote:
Hi, i've got a Windows XP pro computer with two drives. Ones a 80gb
western digital raptor, and the other is a 7200
Er yeah sorry, I mean BIOS not registry haha. It shows up fine...when I
tried unplugging my main 80gb drive, I tried booting twice to the other
drive and it would just sit there after attempting to detect DMI
settings or some such other thing. I found it odd because I expected an
"Operating S
To use the second drive you will probably need to also change a switch or
jumper on the drive changing it from a slave drive to a master. At that
point the BIOS should show it correctly as a master drive. In most BIOS
these days there is a setting for boot device order, you may need to check
Hi all,
First off, I'm new to FreeBSD and this mailinglist so I hope I am in the
right place. Anyways, right now I am having some problems with FreeBSD
booting up. I have tried to install 3 times now and keep getting the
same error. When I try to boot into FreeBSD, this eventually comes up:
1 - 100 of 115 matches
Mail list logo
