Removing agp from kernel didn't work. It still freezes unless I
comment out the agpmode 4...
Any other tips?
Rgrds
On 7/18/06, Derek Ragona <[EMAIL PROTECTED]> wrote:
Do you have the agp kernel module not loaded? In 6.x there are known
problems with the agp kernel module which is co
On Sunday 16 July 2006 17:14, stan wrote:
> On Sun, Jul 16, 2006 at 02:53:24PM +0100, Matthew Seaman wrote:
> > stan wrote:
> > > gmirror lable -vnb round-robin load rootfs /dev/ad4
> > >
> > > Anyone got any ideas here?
> >
> > Yes. It's 'label' not lable. And you can't have both 'round-robin'
>
Let me have a look at /etc/make.conf and /etc/resolv.conf
Subhro
On 7/18/06, Sean M. <[EMAIL PROTECTED]> wrote:
OK, that one little thing has made it about 80% perfect now. Just three
details:
1) It takes an awfully long time to start up. I guess this is related
to the next point:
2) The outp
Hi all
I need to change the IP and netmask of my FreeBSD 6.1 Box and I dont' know
how to do once the system is up and running. I have tried doing with KDE
but I have several errors when I restart the computer.
I have Samba installed also.
Can anyone help me?
Thanks in advance and best regards
On Tue, 18 Jul 2006 09:13:05 - (GMT)
"DSA - JCR" <[EMAIL PROTECTED]> wrote:
> Hi all
>
> I need to change the IP and netmask of my FreeBSD 6.1 Box and I dont' know
> how to do once the system is up and running.
ifconfig(8). For instance, to set the IP address 10.1.2.3 with
a netmask of 255.2
Juan:
Easiest way is to edit /etc/rc.conf and reboot.
- Barry
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of DSA - JCR
> Sent: 18 July 2006 10:13
> To: freebsd-questions@freebsd.org
> Subject: How to change NIC IP when system is running FBSD 6.
On 17/07/2006 21:15, Gobbledegeek wrote:
> After a long search and no solution in sight, I have to ask here -
> many people have reported this problem, the xorg developers
> deliberately default to agpmode 1x because they know it hangs
> unpredictably otherwise. The problem has bee
6.1-RELEASE, 'make fetch' in x11/kde3, fresh csupped ports tree.
The config screen from x11/kde3 aborts with the following output after
'make fetch' and making a selection (all) and pressing 'OK':
LANG=C: not found
LANG=C: not found
PORTSDIR=/usr/ports
KDE_FULL_SESSION=true
ARCH=i386
ECHO_MSG=ech
> >>
> >> Now I'm on to another issue.
> >>
> >> When I plug in the thumb drive, which is a 512MB
> USB 2.0 Mobile
> >> Swingdrive, containing an MS-DOS filesystem, I
> get the following:
> >>umass0: vendor 0x0930 USB Flash Memory, rev
> 2.00/1.00, addr 2
> >>da0 at umass-sim0 bus 0 targ
Andrey Slusar <[EMAIL PROTECTED]> writes:
> I have the 100m USB bluetooth adapter. It's adapter is supported by
> ng_ubt module and not really work. It's the log:
> --8<---cut here---start->8---
> ubt0: on uhub0
> ubt0: vendor 0x1131 ISSCBTA, rev 1.10/3.73, add
Bob wrote:
Mike Meyer wrote:
Well, one solution is to distribute sources - which works especially
well if you provide a port. See below for more on that.
Yes, but the sources Makefile would have to be not only version aware,
but also "port-status" aware as well, and then call ld with
To: freebsd-questions@freebsd.org
Subject: How to change NIC IP when system is running FBSD 6.1
Hi all
I need to change the IP and netmask of my FreeBSD 6.1 Box and
I dont' know
how to do once the system is up and running. I have tried
doing with KDE
but I have several errors when I restart t
> -Original Message-
> From: [EMAIL PROTECTED]
> Subject: Re: How to change NIC IP when system is running FBSD 6.1
>
> >> To: freebsd-questions@freebsd.org
> >> Subject: How to change NIC IP when system is running FBSD 6.1
> >>
> >> Hi all
> >>
> >> I need to change the IP and netmask
On Tuesday 18 July 2006 15:49, Erin Fortenberry wrote:
> > But please, that's so, um, "Windows-ish"?
> >
> > #ifconfig xl0 down*
> > #ifconfig xl0 192.168.0.2 netmask 255.255.255.0
> >
> > Cake!
> >
> > Kevin Kinsey
>
> Don't forget to adjust the default route and save your changes for when the
>
Greetings all!
I was thumbing through the archives and noticed that someone posted a link to
the following site:
http://www.unixlike.com.br/?p=%2081
They mentioned they couldn't read the language it was written in, so I
translated it. Hopefully this will help some people. It was written in
Bra
Hello Family,
I have a dual-boot box running FreeBSD-6.1 and SuSE-10.0 and I "had"
a SCSI HP-9100 CDRW and took it out to put in a CD/DVD drive.
I have three drives and a Plextor CD-RW/DVD-RW drive so all my
controllers were used so I grabbed a Promise controller.
###
Hello,
I've been trying to solve this problem by myself for a long time now, but no
luck.
I run a few dozens of FreeBSD 5.3/5.4 machines, which serve as routers, NAT
boxes,
Apache, Postfix, OpenVPN, ... servers. Most of them are low-cost PC machines
since
they are usually deployed to SOHO envir
Jonathan McKeown writes:
> > Don't forget to adjust the default route and save your changes
> > for when the next windows-ish reboot does happen.
>
> And don't you also need to change /etc/hosts?
Or BIND.
And depending on what else is installed - in the base system or
from p
On 7/18/06, DSA - JCR <[EMAIL PROTECTED]> wrote:
Hi all
I need to change the IP and netmask of my FreeBSD 6.1 Box and I dont' know
how to do once the system is up and running. I have tried doing with KDE
but I have several errors when I restart the computer.
I have Samba installed also.
you c
Tue, 18 Jul 2006 08:29:57 -0400, Lowell Gilbert wrote:
> > ~#ngctl types
> > There are 7 total types:
> > Type name Number of living nodes
> > - --
> > socket 1
> > btsock_l2c 1
> > btsock_l2c_raw 1
> > btsock_hci_raw
Tue, 18 Jul 2006 08:29:57 -0400, Lowell Gilbert wrote:
> > I have the 100m USB bluetooth adapter. It's adapter is supported by
> > ng_ubt module and not really work. It's the log:
> > --8<---cut here---start->8---
> > ubt0: on uhub0
> > ubt0: vendor 0x1131 ISSC
What's th sytax for addid a static (non default) route via rc.conf?
And while I'm here, how about a sanity check to make certain this is really
what I want to do.
Historicaly, the machine in question has lived on a network with only one
gateway off that net. Now, as part of a transition, I'm chan
in rc.conf, put something like this:
static_routes="legacy"
route_legacy="-net 192.168.2 192.168.1.150"
the static_routes line is a list of network names that you want to put
routes in for, then each name gets its own route_name line. As for
your sanity check, I don't see why it would be a probl
Hello,
in make.conf I added:
.if ${.CURDIR:N/usr/ports/*}
MAKEFLAGS+= -j 9
.endif
but the compilation doesn't occur as if I do `make -j9`
Any ideas ??
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
On Tue, 18 Jul 2006 17:42:23 +0200 Mathieu Prevot wrote:
> .if ${.CURDIR:N/usr/ports/*}
Hi,
do you mean:
.if ${.CURDIR:M*/usr/ports/*}
> MAKEFLAGS+= -j 9
> ..endif
>
> but the compilation doesn't occur as if I do `make -j9`
I'd ask you what are you trying to accomplish with this value, but
th
On Tue, Jul 18, 2006 at 11:30:50AM -0400, Andy Greenwood wrote:
> in rc.conf, put something like this:
>
> static_routes="legacy"
> route_legacy="-net 192.168.2 192.168.1.150"
>
> the static_routes line is a list of network names that you want to put
> routes in for, then each name gets its own r
Hi,
Sorry to insist, really, but this bug is really annoying: today, two more
apache servers have frozen while being scanner by a crawler:
[Sat Jul 15 14:25:40 2006] [error] [client 66.147.238.238] File does not exist:
/home/abc.ch/www/data/blogs
[Sat Jul 15 14:25:40 2006] [error] [client 66.14
Hi everyone,
I found a problem and its solution. Now I'd like someone to help me
understand a few things please.
My stock sendmail cannot send emails to a certain domain due to broken
DNS () responses. All correspondence gets queued with a:
(Deferred: Name server: .: host name lookup failure
On Tuesday 18 July 2006 12:19, Philippe Lang wrote:
> Hi,
>
> Sorry to insist, really, but this bug is really annoying: today,
> two more apache servers have frozen while being scanner by a
> crawler:
>
> [Sat Jul 15 14:25:40 2006] [error] [client 66.147.238.238] File
> does not exist: /home/abc.ch
I have no other ideas. Unfortunately ATI doesn't support anything but
windows and Mac OS X. And with agp being replaced with PCI Express, this
issue is unlikely to get resolved. You might want to change to an nvidia card.
-Derek
At 02:23 AM 7/18/2006, Gobbledegeek wrote:
Removing
Currently running FreeBSD 6.0-STABLE #0 on a development server and
attempted to update source via cvsup to 6.1-STABLE. Went through the same
procedures that I have always used in the past and the server stated to
still be running 6.0-stable. The following are the procedures that I use.
I deleted
Cody Holland wrote:
> Currently running FreeBSD 6.0-STABLE #0 on a development server and
> attempted to update source via cvsup to 6.1-STABLE. Went through the same
> procedures that I have always used in the past and the server stated to
> still be running 6.0-stable. The following are the proc
Mikhail Goriachev wrote:
Cody Holland wrote:
Also RELENG_6 won't take you to 6.1. You need RELENG_6_1. Check files in
/usr/share/examples/cvsup/ for more details about configurations.
Nope. RELENG_6_1 is the errata only branch (6.1 RELEASE plus
critical bug fixes), it is not STABLE. RELENG_
In my httpd-access.log I have started to see a lot of these
messages.
How do I tell Apache server to not allow this kind of input?
I have already commented out proxy_module in httpd.config.
219-86-33-41 - - [18/Jul/2006:12:18:55 -0400] "CONNECT
168.95.5.101:25 HTTP/1.0" 200 6989 "-" "-"
219-86-33-
I am not sure if this is a FreeBSD specific question or a freevo
question, but here it goes. I was wondering if anyone has been able
to get freevo working on FreeBSD 6.1 with a pvr-250 card?
I have the card working and can do 'mplayer /dev/cxm0' to watch tv
(including sound), but I can't seem to
Greg Barniskis wrote:
> Mikhail Goriachev wrote:
>> Cody Holland wrote:
>
>> Also RELENG_6 won't take you to 6.1. You need RELENG_6_1. Check files in
>> /usr/share/examples/cvsup/ for more details about configurations.
>
> Nope. RELENG_6_1 is the errata only branch (6.1 RELEASE plus
> critical b
/etc/make.conf:
# added by use.perl 2006-07-14 05:33:46
PERL_VER=5.8.8
PERL_VERSION=5.8.8
/etc/resolv.conf:
search vc.shawcable.net
nameserver 64.59.144.92
nameserver 64.59.144.93
--- Subhro <[EMAIL PROTECTED]> wrote:
> Let me have a look at /etc/make.conf and /etc/resolv.conf
>
> Subhro
>
In FreeBSD 6.1 , there was created a directory named /var .
I created a subdirectory in it named homes , and in that more
subdirectories, one per user in /home .
As a plain user , I tried to create (while in my home directory)
a subdirectory named var by typing
If you typed ls -l var, that would display the contents of the var
directory. I think what you want is (while in your home) ls -l | grep
var
On 7/18/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
In FreeBSD 6.1 , there was created a directory named /var .
I created a subdirectory in
Hello,
IN order to use the OCE feature of 3ware controllers would the pseudo
way to do it be:
1) Un-mount the partition
2) install the new hdd (suppose this could be done before any of this)
3) tell the 3ware controller to expand the capacity
4) remount the partition
Now that all seems easy e
On Tue, Jul 18, 2006 at 07:02:00PM +0300, Adi Pircalabu wrote:
> On Tue, 18 Jul 2006 17:42:23 +0200 Mathieu Prevot wrote:
>
> > .if ${.CURDIR:N/usr/ports/*}
>
> Hi,
> do you mean:
> .if ${.CURDIR:M*/usr/ports/*}
>
> > MAKEFLAGS+= -j 9
> > ..endif
> >
> > but the compilation doesn't occur as if
[EMAIL PROTECTED] wrote:
In FreeBSD 6.1 , there was created a directory named /var .
I created a subdirectory in it named homes , and in that more
subdirectories, one per user in /home .
As a plain user , I tried to create (while in my home directory)
a subdirectory named var by t
Hello.
I would like to know if there is a shibboleth package available for
FreeBSD 6.1 (or even for previous version). I am working on a PFSense
firewall in order to add new functionalities on it (the PFSense
distribution is installed on a FreeBSD 6.1 system and available on a
live-CD). I hav
"[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote:
> In FreeBSD 6.1 , there was created a directory named /var .
> I created a subdirectory in it named homes , and in that more
> subdirectories, one per user in /home .
> As a plain user , I tried to create (while in my home directory)
Well, i have HP laptop dv5178us model.
i installed freebsd 6.1, after installation is complete, it will ask you to
remove any cd and reboot
till here is fine
after i reboot, it hangs!!
nothing happens! nothing moves!! just blank black dead screen!!
I installed fbsd again, and the same...in
Redirected from freebsd-drivers@
Wes L. Zuber wrote:
However, FreeBSD will not recognize the actual logical disc, ar0. It
does see both drives on the card individually, just not ar0. The card
looks the same as the old card but appears to only have a different
BIOS. Could not flash the BIOS on
Hi,
All of a sudden today I'm getting :
nologin: Attempted login by root on UNKNOWN
on a server... Its happening QUITE a bit :
Jul 18 13:16:01 asgard nologin: Attempted login by root on UNKNOWN
Jul 18 13:16:01 asgard kernel: Jul 18 13:16:01 asgard nologin: Attempted login b
y r
Em Ter, 2006-07-18 às 14:14 +, Christopher Hobbs escreveu:
> Greetings all!
>
> I was thumbing through the archives and noticed that someone posted a link to
> the following site:
>
> http://www.unixlike.com.br/?p=%2081
>
> They mentioned they couldn't read the language it was written in, s
On Tue, 18 Jul 2006, Tuc at T-B-O-H wrote:
Hi,
All of a sudden today I'm getting :
nologin: Attempted login by root on UNKNOWN
on a server... Its happening QUITE a bit :
Jul 18 13:16:01 asgard nologin: Attempted login by root on UNKNOWN
Jul 18 13:16:01 asgard kernel: Jul 18
--On July 19, 2006 12:18:06 AM +0200 Velotiaray
<[EMAIL PROTECTED]> wrote:
Hello.
I would like to know if there is a shibboleth package available for
FreeBSD 6.1 (or even for previous version).
There's two parts to Shibboleth; identity provider and service provider.
Which one are you lookin
someone from the kde list pointed me to this:
http://www.freebsd.org/cgi/cvsweb.cgi/ports/x11/kdebase3/files/patch-post-3.5.3-screensavers?rev=1.1&content-type=text/x-cvsweb-markup
can someone please instruct me on what to do with this to i assume merge this
into my kde3 port sources?
tia,
jona
doug wrote:
On Tue, 18 Jul 2006, Tuc at T-B-O-H wrote:
Hi,
All of a sudden today I'm getting :
nologin: Attempted login by root on UNKNOWN
on a server... Its happening QUITE a bit :
Jul 18 13:16:01 asgard nologin: Attempted login by root on UNKNOWN
Jul 18 13:16:01 asgard kernel: Ju
Hey Guys,
I have a Dell Poweredge 2550 running 6.0_Release-P9, about 5 weeks ago
it started locking up for no reason. When the machine locks up
i can ping it, telnet to 80 & 22 ( no banner returned ) but nothing else.
There is nothing in any of the logs indicating a problem, it simply just
s
> >> Jul 18 14:21:02 asgard nologin: Attempted login by root on UNKNOWN
> >> Jul 18 14:21:02 asgard kernel: Jul 18 14:21:02 asgard nologin:
> >> Attempted login by root on UNKNOWN
> >>
> >> I'm not sure who/what/where to start looking. Ideas?
>
Hey Darek,
Good to hear from NYI. :)
> > Jul 18 14:08:47 asgard nologin: Attempted login by root on UNKNOWN
> > Jul 18 14:08:47 asgard kernel: Jul 18 14:08:47 asgard nologin: Attempted
> > login by root on UNKNOWN
> > Jul 18 14:21:02 asgard nologin: Attempted login by root on UNKNOWN
> > Jul 18 14:21:02 asgard kernel: Jul 18 14:21:02
Tuc at T-B-O-H.NET wrote:
Jul 18 14:21:02 asgard nologin: Attempted login by root on UNKNOWN
Jul 18 14:21:02 asgard kernel: Jul 18 14:21:02 asgard nologin:
Attempted login by root on UNKNOWN
I'm not sure who/what/where to start looking. Ideas?
Hey Darek,
Good to hear f
Hi David,
hmm, well didn't use to have to do that. One could build the raid
from the BIOS and do it that way. Perhaps this has changed with the
new BIOS. I will try it.
Thanks,
--Wes
On Jul 18, 2006, at 4:21 PM, David Nugent wrote:
Redirected from freebsd-drivers@
Wes L. Zuber wrote:
july 17 /06
from david
I asked about boot problems with the x6da8-g2+ supermicro server board?
super micro suggests windoze or freebsd 5.2 ia64 bit os and suse 9.0 and
a nother.
you suggest trying the amd 64 bit os,i find this rather peculiar as its
not listed on your sight as an intel board os bu
>
> Tuc at T-B-O-H.NET wrote:
> Jul 18 14:21:02 asgard nologin: Attempted login by root on UNKNOWN
> Jul 18 14:21:02 asgard kernel: Jul 18 14:21:02 asgard nologin:
> Attempted login by root on UNKNOWN
>
> I'm not sure who/what/where to start looking. Ideas?
>
Marwan Sultan wrote:
Well, i have HP laptop dv5178us model.
i installed freebsd 6.1, after installation is complete, it will ask you
to remove any cd and reboot
till here is fine
after i reboot, it hangs!!
nothing happens! nothing moves!! just blank black dead screen!!
I installed fbsd ag
60 matches
Mail list logo
