Re: Questions about FreeBSD arp table

Sean Murphy wrote: Does rebooting FreeBSD clear the arp table? The arp table is continuously cleaned up, dynamic entries expire after about one minute. am I correct with arp -d * should clear all arp information? Yes Erik -- Ph: +34.666334818 web: www.lo

Re: 15 digit HEX string in /var/log/messages

Tom Nguyen wrote: > Greetings all, > > Running FreeBSD 5.4 stable on intel x86 platform. Need help in > deciphering /figuring out what is the cause of strange 15 character HEX > strings that is logging in /var/log/messages: > > [...] > Feb 14 13:11:39 hostx kernel: 3E0D0A3C6172656 > Feb 14 13:14:

Re: Identity for HELO in sendmail

Malcolm Kay wrote: > I can now send e-mails using the standard 'mail' utility > to most destinations but apparently 'alpha.home' is still used as > the source domain in the HELO command and as this just my > private hostname for the machine it is not known at the > receiving end in spite of the

Re: SATA Raid

From a little 1U server I am using : Promise PDC20371 SATA150 controller All the best : driver are setup in the card so you can upgrade your system without any problem. You'll probably have to compile driver before uploading them to the card... Or http://www.lsilogic.com/products/megaraid

Re: SATA Raid

Do note that cheap SATA raid controllers are in fact 'software' raid cards; much of the load is on the cpu rather than the asic. - Original Message - From: "bsd" <[EMAIL PROTECTED]> To: "Robert Uzzi" <[EMAIL PROTECTED]> Cc: "Liste FreeBSD" Sent: Wednesday, February 15, 2006 5:26 PM Subje

Re: SATA Raid

For my purposes that is fine. I and looking to build a 1T nfs server to service my dual 3G Xeon box and another Solaris box. > Do note that cheap SATA raid controllers are in fact 'software' raid > cards; > much of the load is on the cpu rather than the asic. > > - Original Message - > Fr

Re: SATA Raid

In that case maybe you want to consider software raid on freebsd. It's dead easy to install and configure. http://www.onlamp.com/pub/a/bsd/2005/11/10/FreeBSD_Basics.html - Original Message - From: "Robert Uzzi" <[EMAIL PROTECTED]> To: "Foo Ji-Haw" <[EMAIL PROTECTED]> Cc: "bsd" <[EMAIL PRO

Re: SATA Raid

That still dosen't connedt SATA to a non sata board though. That's my situation I have 6 SATA drives but no SATA native board. Looking for a cheap addin card to build this upon. > In that case maybe you want to consider software raid on freebsd. It's > dead > easy to install and configure. > http:

pop3 server recommendation (APOP/TLS)

I am looking for a recommendation for a pop3 server that can do APOP and TLS on port 110. Qpopper was a disaster and I am not interested in cyrus (and dealing with maildirs)... Is there any other option? Qpopper worked with some of the clients (like eudora) but then had issues with Thunderb

Re: IP Routing Question

Well, the solution ended up just setting up the rule for the subnet, not the host... route add aaa.bbb.ccc.200/29 aaa.bbb.ccc.200 -interface Had to move some IP addresses, but at least the traffic is going to the right ethernet controller now. Thanks for the help! - Original Message -

Re: Odd daily run output.

>> Filesystem 1K-blocks UsedAvail Capacity Mounted on >> /dev/ad0s1e253678-1358 234742-1%/tmp > >I know there's 8% reserved for softupdates, but how is it possible ^^^ >Not for soft updates, but generally for root to be able to w

Syslog

Hello, I'm trying to get syslog to log on a remote host. This part is really not a problem, but when I try to define at the "loghost" to which files i want to log my incoming logs I don't get anything to work. I cant find anything in the manual either. I've tried this: +sphere *.*

Re: Identity for HELO in sendmail

On Wed, 15 Feb 2006 07:26 pm, Matthew Seaman wrote: > Malcolm Kay wrote: > > I can now send e-mails using the standard 'mail' utility > > to most destinations but apparently 'alpha.home' is still > > used as the source domain in the HELO command and as this > > just my private hostname for the mach

Re: IPFILTER rule error

Hi! Thahks for your attention! >> First of all you really need to read the ipfilter section of the FreeBSD handbook... >> [EMAIL PROTECTED] I've read the handbook. Good starting point! :-) Given that I just _TEST_ ipf config ported from 5.4 to 6.0 on local LAN, I do not violate theoretical

Help! Apache 2.2 gives segmentation fault errors with PHP.

Hi guys, Alright, after having been stuck with this for an hour or two now, I'm going to call upon your infinite wisdom regarding the following: On a FreeBSD 5.2.1-RELEASE #0 (so says dmesg) machine, I'm trying to set-up Subversion, Trac and our regular PHP4 and MySQL stuff. The main issue

Re: daemontools - djbdns

- Original Message - From: "RW" <[EMAIL PROTECTED]> To: ; "Cristian Mijea" <[EMAIL PROTECTED]> Sent: Sunday, February 12, 2006 1:31 AM Subject: Re: daemontools - djbdns > On Thursday 09 February 2006 18:56, Cristian Mijea wrote: >> Ok. trying to follow Matt Simenson's DJBDNS on FreeBSD h

Re: Odd daily run output

Jimmie James <[EMAIL PROTECTED]> writes: > I know there's 8% reserved for softupdates, but how is it possible > that there's _extra_ space on /tmp ? What am I missing? This is the > first time I've seen this. This is a FAQ. In fact, it's listed in the FAQ list. "How is it possible for a partit

Re: Why myserver be locked ?

Hello I think, I found my problem. I suspect the ethernet card so I disabled em0 ethernet card and I put fxp0 intel ethernet card. Meanwhile I went through my problem and I relooked at messages. After the changing ethernet card the machine has not given the same error . But the time has not enough

Re: daemontools - djbdns

Yance Kowara wrote: - Original Message - From: "RW" <[EMAIL PROTECTED]> To: ; "Cristian Mijea" <[EMAIL PROTECTED]> Sent: Sunday, February 12, 2006 1:31 AM Subject: Re: daemontools - djbdns On Thursday 09 February 2006 18:56, Cristian Mijea wrote: Ok. trying to follow Matt Simenso

Re: Odd daily run output.

On Wed, Feb 15, 2006 at 08:22:19AM +0100, Julien Gabel wrote: > > Filesystem 1K-blocks UsedAvail Capacity Mounted on > > /dev/ad0s1e253678-1358 234742-1%/tmp > > > I know there's 8% reserved for softupdates, but how is it possible >

Re: LDAP authentication problems

Igor Robul wrote: On Sun, Feb 12, 2006 at 03:44:54PM +0100, Pavel Duda wrote: Now I have tried to do 'id testuser' You need nss_ldap too. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To

Re: Odd daily run output.

>>> Filesystem 1K-blocks UsedAvail Capacity Mounted on >>> /dev/ad0s1e253678-1358 234742-1%/tmp >>> >>> I know there's 8% reserved for softupdates, but how is it possible ^^^ >> Not for soft updates, but generally for root to be

more questions about disk cloning

Hi, Thanks to all help I've received thus far, I seem to be getting closer to my goal of backing up a small hard disk to a large one. Remember that the "dump" command is causing core dumps on the source volume. The two paths I'm working within are: 1) Using g4u to clone disk (this has w

Re: Using dd to Make a Clone of a Drive

I have used dump/restore and dd as well. For a block size, I chose 102400 which was the fastest -- but still slow compared to dump/restore. Dump/restore is not limited to making a whole image, blanks and all like dd. Once upon a time, I used this as the best: dd if=/dev/ad0 of=/dev/ad1 bs=10240

Re: any issues with usb hard drives?

--- John Levine <[EMAIL PROTECTED]> wrote: > >I'm wondering whether USB hard drives will work out of the box with > >FreeBSD. Anything I should be concerned about? > > I've been using them for backup and they're great. Support was flaky > in 5.3 but it's been very reliable in 5.4 and 6.0. > >

Re: core dump with dump command in single user mode

On Feb 14, 2006, at 5:46 PM, Lowell Gilbert wrote: Joe Auty <[EMAIL PROTECTED]> writes: On Feb 14, 2006, at 9:08 AM, Lowell Gilbert wrote: Joe Auty <[EMAIL PROTECTED]> writes: Hello, Following the instructions here: http://www.unixcities.com/howto/ index.html I did a: Those directions

Re: any issues with usb hard drives?

> Any hints on how to get started? I am reading the GEOM section in the > manual and it focuses on setting up RAID. Just label the drives, so they'll show up as /dev/ufs/ when you plug them in. Regards, John Levine, [EMAIL PROTECTED], Primary Perpetrator of "The Internet for Dummies", Informati

how to tell what ran what

Hi there, Is there a way to find out -which- -process- calls another process? OK, for instance, I know that user "userid" called sendmail 3 times because sa or lastcomm or whatever tells me so, but what -program- issued the call. Something like: usercalledcalled from nobody

mount_smbfs performance

Hello all, I have the smbfs performance problem while connecting to the Windows (w2k3) share in the AD environment, wint 6.1-PRERELEASE - with the filesystem mounted through mount_smbfs i get 300-350 kBps (kiloBytes per sec) speed, while through the smbclient i get the speeds in excess of 8MB

Re: IPFILTER rule error

Maxim Vetrov wrote: # Internal interface #1 - rl0 (10.0.1.0/29) # #% Block-and-log

Blocking an individual email address

I am running a FreeBSD 5.4p10 machine at my office. It functions as our firewall and mailserver. I am running Mailscanner, which invokes sendmail when necessary to process mail. Sendmail is not started by defaultMailscanner invokes individual instances of it when it needs to. Here is my

Re: Concerns about wording of man blackhole

Fabian Keil wrote: > I set Followup-To freebsd-questions. OK. [ ... ] > In which way does this protect against stealth port scans? Returning a RST tells the scanner that the port is definitely closed. Returning nothing gives less information. >>> As open ports still show up as open

Re: Odd daily run output

On 15 Feb 2006, at 13:26, Lowell Gilbert wrote: Jimmie James <[EMAIL PROTECTED]> writes: I know there's 8% reserved for softupdates, but how is it possible that there's _extra_ space on /tmp ? What am I missing? This is the first time I've seen this. This is a FAQ. In fact, it's listed in

Re: Blocking an individual email address

Okay...I think I answered part of my question. /etc/mail/access only governs mail relaying. Which would mean that of course, it wouldn't accept mail from that address, but would have no problem sending mail to it. Soany ideas on how I can simply block 1 particular email address, without mark

Re: Blocking an individual email address

James Csoka wrote: I am running a FreeBSD 5.4p10 machine at my office. It functions as our firewall and mailserver. I am running Mailscanner, which invokes sendmail when necessary to process mail. Sendmail is not started by defaultMailscanner invokes individual instances of it when it n

Re: best approach to clone a disk?

On Feb 15, 2006, at 10:51 AM, Steve Quinn wrote: --- Joe Auty <[EMAIL PROTECTED]> wrote: Thanks Steve, These were the exact instructions I started with, only on a different page The problem with these for me is that dump caused a core dump. I've been trying to run dump while booted up f

Re: NVidia GeForce 6600 problems

On Thu, 2 Feb 2006 11:39:19 -0300 Alejandro Pulver <[EMAIL PROTECTED]> wrote: > On Thu, 02 Feb 2006 12:05:14 + > Alex Zbyslaw <[EMAIL PROTECTED]> wrote: > > > Alejandro Pulver wrote: > > > > >On Wed, 1 Feb 2006 15:06:21 -0300 > > >Alejandro Pulver <[EMAIL PROTECTED]> wrote: > > > > > > > >

Re: Blocking an individual email address

In the last episode (Feb 15), James Csoka said: > Okay...I think I answered part of my question. /etc/mail/access only > governs mail relaying. Which would mean that of course, it wouldn't accept > mail from that address, but would have no problem sending mail to it. It covers local and outgoing

Re: how to tell what ran what

Glenn McCalley schrieb: Is there a way to find out -which- -process- calls another process? Each process is associated with a parent; look at the ppid column: ps axo user,pid,ppid,command Björn ___ freebsd-questions@freebsd.org mailing list http:

Re: IPFILTER rule error

On 2006-02-15 16:23, Erik Norgaard <[EMAIL PROTECTED]> wrote: > Maxim Vetrov wrote: > > > ># Internal interface #1 - rl0 (10.0.1.0/29) > ># > >###

Re: Blocking an individual email address

On Wed, 2006-02-15 at 15:52, James Csoka wrote: > I am running a FreeBSD 5.4p10 machine at my office. It functions as our > firewall and mailserver. I am running Mailscanner, which invokes sendmail > when necessary to process mail. Sendmail is not started by > defaultMailscanner invokes i

Re: Blocking an individual email address

I am running a FreeBSD 5.4p10 machine at my office. It functions as our firewall and mailserver. I am running Mailscanner, which invokes sendmail when necessary to process mail. Sendmail is not started by defaultMailscanner invokes individual instances of it when it needs to. Here is m

Stale Dependancy

This might be Newbie question: What is the cleanest way to resolve stale dependency with gamin-0.1.5_3. I think I remember seeing a message that it merged into fam. I did a portupgrade -a, and it's still there. I was surprised this was not self cleansing because I used CVSUP to sync my port

Re: Blocking an individual email address

2006/2/15, Philip Hallstrom <[EMAIL PROTECTED]>: > > > I am running a FreeBSD 5.4p10 machine at my office. It functions as our > > firewall and mailserver. I am running Mailscanner, which invokes > > sendmail when necessary to process mail. Sendmail is not started by > > defaultMailscanner i

Re: RELENG_6 and a Razer Copperhead mouse don't work

On Tue, Feb 14, 2006 at 07:57:09PM +, [EMAIL PROTECTED] wrote: > > 19. RELENG_6 and a Razer Copperhead mouse don't work (lars) > > -- > > Message: 19 > Date: Tue, 14 Feb 2006 19:26:53 +0100 > From: lars <[EMAIL PROTECTED]> > Subject: RELENG_6 and a Razer Copperhe

Re: RELENG_6 and a Razer Copperhead mouse don't work

I have a Diamondback that works well under Xorg and console: ums0: Razer Razer Diamondback Optical Mouse, rev 2.00/1.00, addr 2, iclass 3/1 Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysm

Re: SATA Raid

On Feb 15, 2006, at 4:17 AM, Robert Uzzi wrote: That still dosen't connedt SATA to a non sata board though. That's my situation I have 6 SATA drives but no SATA native board. Looking for a cheap addin card to build this upon. define "cheap" LSI MegaRaid SATA-150 6 (or some comination of thos

i386 or amd64 ?

Hello, I have a AMD Sempron 2600+ 64 bit processor running on a soket 754 ECS motherboard (http://www.ecs.com.tw/ECSWeb/Products/ProductsDetail.aspx?DetailID=555&MenuID=21&LanID=9__) _ _Computer has 256

Re: best approach to clone a disk?

--- Joe Auty wrote: > Thanks Steve, but this is exactly the same script I've been using all > along, while in Single User Mode. > > However, could you explain the zeroing of blocks, and what its > purpose is for? Does this solve the problem of space being lost when > cloning a disk to a lar

Re: Blocking an individual email address

After reading the page you linked to, and looking at the examples, I added the line To:[EMAIL PROTECTED] REJECT (using my personal email), and it had no effect. I can't find any good reason it didn't work, but it fails to prevent me from sending mail from inside my work network to my home address.

bsd.port.mk broken since last commit

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, i recently found out, that the OPENLDAP part of ports/Mk/bsd.port.mk is broken since the last commit. I think it was only by accident, because the commit message says: - - Update the OpenLDAP default version. [8] Unfortunately, not the defaul

Re: Syslog

On 2/15/06, Peter Ankerstål <[EMAIL PROTECTED]> wrote: > Hello, > > I'm trying to get syslog to log on a remote host. This part is really > not a problem, but when I try to define at the "loghost" to which files > i want to log my incoming logs I don't get anything to work. I cant find > anything i

PPPoE question

Hi, I am trying to setup my pppoe connection and I keep getting the following error: Gateway ppp[526]: tun0: Error: ipcp_InterfaceUP: unable to set ip address My ppp.conf looks something like this: default: nat enable yes nat same_ports yes nat use_sockets yes nat unregister

Re: how to tell what ran what

- Original Message - From: "Björn König" <[EMAIL PROTECTED]> To: "Glenn McCalley" <[EMAIL PROTECTED]> Cc: Sent: Wednesday, February 15, 2006 11:13 AM Subject: Re: how to tell what ran what > Glenn McCalley schrieb: > > > Is there a way to find out -which- -process- calls another proces

Re: i386 or amd64 ?

On 2/15/06, Panter V. <[EMAIL PROTECTED]> wrote: > I want to use this computer as a development server and firewall. I will > run Apache 2, PHP 5, MySQL, Samba, an FTP server ... You'll have no problems with these programs on amd64. Printer drivers are probably platform-independent > At a later t

Re: Blocking an individual email address

In the last episode (Feb 15), James Csoka said: > After reading the page you linked to, and looking at the examples, I > added the line To:[EMAIL PROTECTED] REJECT (using my personal email), > and it had no effect. I can't find any good reason it didn't work, > but it fails to prevent me from send

Re: bsd.port.mk broken since last commit

On Wed, Feb 15, 2006 at 08:58:29PM +0100, Joerg Pulz wrote: > > Hi, > > i recently found out, that the OPENLDAP part of ports/Mk/bsd.port.mk is > broken since the last commit. > I think it was only by accident, because the commit message says: > - Update the OpenLDAP default version. [8] > > Un

Malibox is full

Please Help Me I have FreeBSD mail server but I have a problem that some emails I can’t receive them because when they send the mail to me they receive a mail written on it mailbox is full but when they send to me an email from yahoo or hotmail I receive the mail Thank _

Re: how to tell what ran what

Glenn McCalley wrote: > > - Original Message - > From: "Björn König" <[EMAIL PROTECTED]> > To: "Glenn McCalley" <[EMAIL PROTECTED]> > Cc: > Sent: Wednesday, February 15, 2006 11:13 AM > Subject: Re: how to tell what ran what > > >> Glenn McCalley schrieb: >> >> > Is there a way to find ou

natd with several alias IPs

I wonder, what tricks do you use to use more than one alias IP? I mean, if you have hundreds of hosts behind your firewall, what can you do to alias some of them to one ip, others to another and so on. I know pf can probably do it in a better fashion, I just wonder how we can do it with natd. Seve

Re: i386 or amd64 ?

Andrew Pantyukhin wrote: > On 2/15/06, Panter V. <[EMAIL PROTECTED]> wrote: >> I want to use this computer as a development server and firewall. I will >> run Apache 2, PHP 5, MySQL, Samba, an FTP server ... > > You'll have no problems with these programs on amd64. Printer > drivers are probably p

Re: best approach to clone a disk?

On Feb 15, 2006, at 2:40 PM, Steve Quinn wrote: --- Joe Auty wrote: Thanks Steve, but this is exactly the same script I've been using all along, while in Single User Mode. However, could you explain the zeroing of blocks, and what its purpose is for? Does this solve the problem of space bein

Re: Malibox is full

> > Please Help Me > > I have FreeBSD mail server but I have a problem that some emails I can’t > receive them because when they send the mail to me they receive a mail > written on it mailbox is full but when they send to me an email from yahoo > or hotmail I receive the mail Do you have quo

Re: PPPoE question

My ppp.conf looks like this: default: qdsl: nat enable yes set device PPPoE:fxp1 add! default HISADDR set authname set authkey Maybe the missing "!" after the "add" keyword is the solution to your problem. Björn _

Re: how to tell what ran what

> > > > > >> Glenn McCalley schrieb: > >> > >> > Is there a way to find out -which- -process- calls another process? > >> > >> Each process is associated with a parent; look at the ppid column: > >> > >>ps axo user,pid,ppid,command > >> > >> Björn > >> > >> > > Thanks, I stated the question poo

Re: best approach to clone a disk?

> > > Thanks Steve, but this is exactly the same script I've been using all > > along, while in Single User Mode. > > > > However, could you explain the zeroing of blocks, and what its > > purpose is for? Does this solve the problem of space being lost when > > cloning a disk to a larger di

Re: how to tell what ran what

Glenn McCalley wrote: Glenn McCalley schrieb: Is there a way to find out -which- -process- calls another process? Each process is associated with a parent; look at the ppid column: ps axo user,pid,ppid,command Björn Thanks, I stated the question poorly. My fault. Is historical inf

Re: how to tell what ran what

On 2/15/06, Glenn McCalley <[EMAIL PROTECTED]> wrote: > > - Original Message - > From: "Björn König" <[EMAIL PROTECTED]> > To: "Glenn McCalley" <[EMAIL PROTECTED]> > Cc: > Sent: Wednesday, February 15, 2006 11:13 AM > Subject: Re: how to tell what ran what > > > > Glenn McCalley schrieb: >

Re: Blocking an individual email address

"James Csoka" <[EMAIL PROTECTED]> writes: > After reading the page you linked to, and looking at the examples, I added > the line To:[EMAIL PROTECTED] REJECT (using my personal email), and it had no > effect. I can't find any good reason it didn't work, but it fails to > prevent me from sending m

Re: math/lapack (lapack-3.0) (unknown build error)

On Wed, 8 Feb 2006, Anthony Philipp wrote: Hello, I was doing an upgrade today and one of the ports failed. I have since checked /usr/ports/UPDATING, the mailing list and then updated my ports tree again, all to no avail. Here is the error: --- f77 -O -c ssyr2k.f f77 -O -c strmm.f f77 -O -c

Help with the disappearing keys

When I start the system and get to the lines: Sun Feb 12 14:17:52 CET 2006 FreeBSD/i386 (jfs000) (ttyv0) login: I can type my login which is john, but I can also type the letters ÅÄÖ or åäö. But as soon as I log in as john (or root) and see the message of the day and the prompt: $ I can

Re: Large imap server.

Foo Ji-Haw writes: I'm not sure what's the peak traffic like, but we were using a standard P3 800Mhz server h/w w/ 1GB RAM, and SCSI drives. How many of those? Also is that your front-end (ie POP/IMAP) machine or your storage (NFS server) machine?

Re: Blocking an individual email address

Lowell Gilbert wrote: "James Csoka" <[EMAIL PROTECTED]> writes: After reading the page you linked to, and looking at the examples, I added the line To:[EMAIL PROTECTED] REJECT (using my personal email), and it had no effect. I can't find any good reason it didn't work, but it fails to prevent

Re: best approach to clone a disk?

--- Joe Auty <[EMAIL PROTECTED]> wrote: > > It sort of helps, but sort of doesn't at the same time. I've tried > the dump command from the script using the correct slices, and still > had that kernel panic. I figured that using the Freesbie CD might be > a way of testing whether my install

Re: Blocking an individual email address

> Date: Wed, 15 Feb 2006 10:52:26 -0500 > From: "James Csoka" <[EMAIL PROTECTED]> > Subject: Blocking an individual email address > To: > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > I am running a FreeBSD 5.4p10 machine at my office. It functions as o

Ethernet Stopping Problem

Hi, I have a freebsd 5.2 box setup as my gateway for my home network. The network is layed out as follows: FreeBSD Gateway - 10.0.0.1/16 ADSL Router - 10.0.0.2/16 DHCP Network - 10.0.1.0 - 10.0.1.254 all /16 with default gateway as .1 I have ppp enabled on the freebsd unit, and it connects fine

Weird KDE error - nss_ldap

Running 6.1-STABLE, KDE 3.5.1, xorg 6.9.0. cvsupped and portupgraded this morning just to be sure. When in konqueror using the "root file system" view, if I click on /home, nothing happens. All other directories are displayed ok. In the terminal that started X I note the following cryptic mes

RE: PPPoE question

Ian, This is what works for most people. Doing nat in pppoe is not normally done. Doing nat as part of your firewall process is the accepted place. And I see no reason to have compiled NETGRAPH in your kernel. PPPoE, ppp.conf statements for DSL connection start of DSL

RE: natd with several alias IPs

I am not sure just what you are asking about. Are you saying that you have 4 static public ip address assigned to you by your ISP and you want to round robin those 4 in the NATing process to your hundreds of LAN users? If that's what you are after then any of FreeBSD's 3 built in firewall can do

RE: Ethernet Stopping Problem

Need more background info. Explain where you are getting the public non-routable 10.0.0.0 ip address from. You say the ADSL router is using them. Did you edit your real ip address to hide then from this public post? Also you have to post your ppp.conf file. Are you trying to configure PPPoe? ---

ethernet Interface haywire ???

Has anyone run into this scenario where a BSD Box (RELENG_5_4) takes down the whole subnet for only FreeBSD boxes. Here’s the scenario: One of my web servers goes into a crazy state which kills all traffic on the network for only FreeBSD boxes. Linux boxes can talk to other linux boxes, but FreeB

Re: natd with several alias IPs

On 2/16/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > I am not sure just what you are asking about. > > Are you saying that you have 4 static public ip address assigned to > you by your ISP and you want to round robin those 4 in the NATing > process to your hundreds of LAN users? > > If that's

Re: Blocking an individual email address

James Long wrote: > > Date: Wed, 15 Feb 2006 10:52:26 -0500 > > From: "James Csoka" <[EMAIL PROTECTED]> > > Subject: Blocking an individual email address > > To: > > Message-ID: <[EMAIL PROTECTED]> > > Content-Type: text/plain; charset="iso-8859-1" > > > > I am running a FreeBSD 5.4p10 machine

Re: Blocking an individual email address

If you installed MailScanner from the ports, look to change: /usr/local/etc/MailScanner/rules/spam.blacklist.rules You can specify To, and From rules, there, maybe more. I am no expert. Hope this helps, -Derek At 09:52 AM 2/15/2006, James Csoka wrote: I am running a FreeBSD 5.4p10 mac

slapd and bdb-4.2.52

Knowledgeable Ones, I'm setting up a FreeBSD 6.0 RELEASE system. I've installed from ports: courier-authlib-0.58_1 courier-imap-4.0.6_1,1 cyrus-sasl-2.1.21_2 db42-4.2.52_4 openldap-sasl-client-2.2.30 openldap-sasl-server-2.2.30 openssl-stable-0.9.7i postfix-2.2.8_2,1 and other related ports. Wh

devfs ruleset appropriate for jail'd environment ...

I had thought there used to be a sample one in /etc/devfs.conf, but its either no longer there, or my memory is failing me ... Does anyone have one that is appropriate for mounting devfs into a jail where ppl have shell access? thanks ... Marc G. Fournier Hub.Org Networking

Re: ethernet Interface haywire ???

I've seen it happen when the ethernet device gets a bus error and throws it into some strange state. I've seen it mostly with on-board intel devices (fxp), but thats what we use mostly so it may not be part specific. DT --- brent <[EMAIL PROTECTED]> wrote: > Has anyone run into this scenario whe

RE: Ethernet Stopping Problem

Things that stop after 5-10 minutes are usually ARP related, but I can't be certain. --- [EMAIL PROTECTED] wrote: > Need more background info. > Explain where you are getting the public > non-routable 10.0.0.0 ip > address from. > You say the ADSL router is using them. > Did you edit your real ip

Re: how to tell what ran what

Glenn McCalley wrote: Thanks Brian, that's already tonights project to run through those logs and see if anything jumps out there. What I think he might be doing is either POSTing the parameters (which won't show up) or he's loaded a file of email addresses and just triggers the mailer with a s

RE: natd with several alias IPs

I am not a ipfw expert. The truth of it is I was a ipfw user before I added a LAN behind my gateway box. Ipfw does it's nating from within ipfw and that it what makes ipfw nating so hard to get right. It's even harder if you use keep state processing. Ipfilter and PF do the nating separate from th

Re: natd with several alias IPs

On 2/16/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > I am not a ipfw expert. The truth of it is I was a ipfw user before > I added a LAN behind my gateway box. Ipfw does it's nating from > within ipfw and that it what makes ipfw nating so hard to get right. > It's even harder if you use keep

Re: ethernet Interface haywire ???

Thanks--the server has em (intel gigabit) nics. Have you seen this on any specific version of FreeBSD and *hopefully* not on others (e.g. RELENG_6_0)? Brent Danial Thom writes: I've seen it happen when the ethernet device gets a bus error and throws it into some strange state. I've seen it mos

Re: ng_one2many v.s. AFT (NIC Fault Tolerance/Fail Over/Redundancy Revisited)

FYI, to bring this thread back to the list -- Forwarded message -- Date: Wed, 15 Feb 2006 20:53:59 -0500 (EST) From: Brian A. Seklecki <[EMAIL PROTECTED]> To: Jonathan Donaldson <[EMAIL PROTECTED]>, [EMAIL PROTECTED], [EMAIL PROTECTED] Cc: [EMAIL PROTECTED], Brian J. Creasy <

Re: ng_one2many v.s. AFT (NIC Fault Tolerance/Fail Over/Redundancy Revisited) (fwd)

-- Forwarded message -- Date: Wed, 15 Feb 2006 20:11:49 -0500 (EST) From: Brian A. Seklecki <[EMAIL PROTECTED]> To: [EMAIL PROTECTED], Jonathan Donaldson <[EMAIL PROTECTED]>, Brian J. Creasy <[EMAIL PROTECTED]> Cc: Chad Ziccardi <[EMAIL PROTECTED]>, Danny Howard <[EMAIL PR

Re: how to tell what ran what

On 2/16/06, Greg Barniskis <[EMAIL PROTECTED]> wrote: > Glenn McCalley wrote: > > > Thanks Brian, that's already tonights project to run through those logs and > > see if anything jumps out there. What I think he might be doing is either > > POSTing the parameters (which won't show up) or he's loa

Radeon x1600

Greetings people! I am using FreeBSD for quiet some years now, and I just recently upgraded my PC. Along came a Radeon x1600 (PCIE). Before that I was a happy-happy joy-joy nvidia (-module) user - it just worked. ;) Now I am having a dickens of a time to get the Radeon x1600 working under Xorg (

Re: how to tell what ran what

On Wed, Feb 15, 2006 at 03:31:46PM -0500, Glenn McCalley wrote: > If I can get a list of what programs, path and file name, called > sendmail over (say) the last 24 hours, one of them should jump off the > page with an unreasonable level of activitiy. A dirty hack would be to replace the sendmail

using an amd64 machine to cross compile apps for ia32?

Hi! I need a simple step-by-step guide to use an amd64-machine (FreeBSD-6.0) to compile an app for both amd64 and ia32 (aka i386) versions of FreeBSD-6.0. Do I need to build a cross compiling gcc binary? The app uses some shared libraries, do I need to maintain them in ia32-versions somewhere

Re: i386 or amd64 ?

Panter V. wrote: [ ... ] > I have a few questions: > > Can I use the amd64 version for this configuration? Yes. > If I use i386 does this mean performances will be visibly lower than > using amd64? No, if anything, most software will run faster in 32-bit mode. YMMV. If you have a really big da

Re: Blocking an individual email address

James Csoka wrote: > After reading the page you linked to, and looking at the examples, I added > the line To:[EMAIL PROTECTED] REJECT (using my personal email), and it had no > effect. I can't find any good reason it didn't work, but it fails to > prevent me from sending mail from inside my work

  1   2   >