On Mon, Jan 02, 2006 at 10:06:52AM -0800, James Long wrote:
> A buildworld is indeed an excellent test of memory, CPU, drives
> and cabling.
>
> The memory tester is sysutils/memtest.
>
> It's not a very scientific test, but one thing I do is a
> make -j8 buildworld whilst I do a large tar opera
perikillo schrieb:
Hi people.
I have this motherboard:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=652
K8N Neo4 AMD64
I install freebsd 6.0 AMD64, the installation was easy. The
problema is my VGA card is one PCIExpress ATI Radeon X300, i install
sus
Hello
I use FreeBSD6.0. I want to use a script to check two or more case.
My first cases are as below;
First case My Server will check the remote ip address alive or not as icmp
Second case My server will connect to other remote ip address as tcp protocol
like connected or not.
if my server c
Robert Huff wrote:
Crispy Beef writes:
I wasn't aware that I needed to do a buildworld too, am limited
on the amount of disk space I have, the whole disk is 6Gb with a
1Gb /home and over 3Gb /usr. Is that going to be enough?
1) It is _very_ important to keep the kernel and userland
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Halid Faith wrote:
> Hello
>
> I use FreeBSD6.0. I want to use a script to check two or more case.
> My first cases are as below;
> First case My Server will check the remote ip address alive or not as icmp
> Second case My server will connect to o
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:owner-freebsd-
> [EMAIL PROTECTED] On Behalf Of Halid Faith
> Sent: Tuesday, January 03, 2006 12:49 PM
> To: freebsd-questions@freebsd.org
> Subject: check script for tcp connection
>
> Hello
>
> I use FreeBSD6.0. I want to use a sc
On 1/2/06, Nikolas Britton <[EMAIL PROTECTED]> wrote:
> On 12/24/05, Philip Lykke Carlsen <[EMAIL PROTECTED]> wrote:
> > I have this external harddisk kit, and when I plug it in, the system
> > correctly
> > recognizes it as a umass.. but afterwards, the da device is never created..
> >
> > this i
Darren Pilgrim wrote:
I don't like (let alone want) ntpd binding to every IP address on the host.
The man pages don't say anything about specifying a binding address for
ntpd. A search of the sources and Google also failed to reveal anything
useful.
So how to I tell ntpd to bind to a specific I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Nikolas Britton wrote:
> One more thing. It's highly likey that your system will hang when you
> disconnect the ipod... prep your system for the worst, a warm reboot.
> Also don't connect the ipod untill you have X running. Connecting the
> ipod and th
On Tue, 3 Jan 2006 12:25 pm, Gayn Winters wrote:
> > [mailto:[EMAIL PROTECTED] On Behalf Of
> > Russell J. Wood
> > Sent: Monday, January 02, 2006 3:54 PM
> > To: freebsd-questions@freebsd.org
> > Subject: Re: Disk error messages (ad0: HARD READ ERROR blk#
> > xx)
> >
> > On Mon, Jan 02, 2006 a
Hi,
I am using FreeBSD 5.2 on my local computer.
I want to upgrade to FreeBSD 6.0
Do i need to download both files ?
ftp://ftp.freebsd.org/pub/FreeBSD/releases/i386/ISO-IMAGES/6.0/6.0-RELEASE-i386-disc1.iso
ftp://ftp.freebsd.org/pub/FreeBSD/releases/i386/ISO-IMAGES/6.0/6.0-RELEASE-i386-disc2.is
Thanks a lot
I have installed monit from ports.
But I have a problem. monit daemon is running . But Although set daemon is
60 ( 1 minute interval) in any problem it send an email to sysadmin only
once time. I want the monit to send a mail every interval during any
problem.
my configuration is bel
--- "FlashWebHost.com" <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I am using FreeBSD 5.2 on my local computer.
>
> I want to upgrade to FreeBSD 6.0
>
> Do i need to download both files ?
No. CD1 will give you as much as the OS plus X11 plus all sources. Plus
the complete ports tree as of 6.0-RELEASE
On Wed, Dec 28, 2005 at 12:36:21PM +0500, Imran Imtiaz wrote:
> I am running ProFTPD 1.2.10 on my bsd server but the problem is that if a user
> don't have a shell and I've defined his shell as nologin then the ftp server
> does
> not logon and give the following error
> C:\Documents and Settings
Hello,
I have a FreeBSD 6.0 system on i386. I would like to add a new label on
my main FreeBSD partition (I have about 30GB free space left).
If I try to add a new slice (ad0s1g, mount point: /shares
size:20031MB, UFS2+S) then I get this message:
unable to write data to disk ad0
I also t
Recently, I pulled down the current ports on my 6.0-RELEASE system and
ran portupgrade (-Ra). Everything works fabulously except for
phpMyAdmin. Other PHP (5.1.1) applications work just fine, including
postfixadmin and others. With phpMyAdmin (2.7.0p2 and all previous
versions that I have at
Hi!
I've a dual boot machine, which was running FreeBSD-5.4 (now
6.0p1) and WinXP. It has a cheap PS/2 mouse (Biswal is the
brand, but I guess it's just a generic mouse, details at the
bottom).
In Windows it works flawlessly ... wheel included. It's been
running for months. In FreeBSD it never wo
On Tue, 3 Jan 2006 05:18:59 -0800 (PST)
Adam Nealis <[EMAIL PROTECTED]> wrote:
--- "FlashWebHost.com" <[EMAIL PROTECTED]> wrote:
Hi,
I am using FreeBSD 5.2 on my local computer.
I want to upgrade to FreeBSD 6.0
Do i need to download both files ?
No. CD1 will give you as much as the OS plu
RW wrote:
On Friday 30 December 2005 13:54, Greg Barniskis wrote:
distribution ISOs as packages. Again, if you simply must have
sources not packages, then at your high speed location, do something
like:
portupgrade -F '*'
Then burn your own ISOs any which way you like. Try to be more
specifi
are too confusing to me. I do not want to accidentally overwrite my
good partitions.
I could create a new partition using
disklabel -e ad0s1
The result is a new 'g' partition:
messias# disklabel ad0s1
# /dev/ad0s1:
8 partitions:
#size offsetfstype [fsize bsize bps/cpg]
a:
> Hello,
>
> I have a FreeBSD 6.0 system on i386. I would like to add a new label on
> my main FreeBSD partition (I have about 30GB free space left).
> If I try to add a new slice (ad0s1g, mount point: /shares
> size:20031MB, UFS2+S) then I get this message:
>
> unable to write data to disk
Thanks Adam for the reply. I will try downloading CD1.
I have upgraded my FreeBSD 5.3 to FreeBSD 5.4 as per
http://www.daemonology.net/freebsd-upgrade-5.3-to-5.4/
There is 5.4 to 6 upgrade also at
http://www.daemonology.net/freebsd-upgrade-5.4-to-6.0/
Regards,
Yujin
---
www.NetFreeHost.com
_
Fernan Aguero wrote:
> Hi!
>
> I've a dual boot machine, which was running FreeBSD-5.4 (now
> 6.0p1) and WinXP. It has a cheap PS/2 mouse (Biswal is the
> brand, but I guess it's just a generic mouse, details at the
> bottom).
>
> In Windows it works flawlessly ... wheel included. It's been
> runni
Jonathan Chen wrote:
On Mon, Jan 02, 2006 at 04:15:48PM +, Crispy Beef wrote:
Hi All,
Just joined this list. The last time I used FreeBSD was with 4.6-RELEASE,
so a while ago now. I have just installed 6.0-RELEASE on my old laptop and
have been configuring the system, am onto the kerne
Since about a month ago I can no longer use wep encryption
with up to date ndis.
[EMAIL PROTECTED] ~ $uname -a
FreeBSD TP51.local 5.4-STABLE FreeBSD 5.4-STABLE #28: Mon Jan 2
12:37:11 CET 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/THINKPAD i386
[EMAIL PROTECTED] /root #ifconfig ndis0 wepke
Hi, this is my first message to the mailing-list. I hope that I have
included
enough information about the problem.
The problem is that my FreeBSD 6.0 (release) won't use the default route
(gateway). So I can't access anything on the internet.
Hardware and network equipment:
Dell latitude D810
On Tuesday 03 January 2006 01:31, Darren Pilgrim wrote:
> So how to I tell ntpd to bind to a specific IP address?
ISC's ntpd doesn't support that, AFAIK. However, depending on your needs,
you might be able to use OpenNTPD which does have that feature.
--
Kirk Strauser
pgpiXu61XgOvj.pgp
Descr
Hi,
This is kind of related to my other post (Kernel Compilation), but thought I'd
post it seperately as it would be interesting to know...
Was wondering on average how long building userland and the kernel for
6.0-RELEASE should take on a 466MHz Celeron machine with 128Mb RAM?
The only fra
--- Christer Folkesson <[EMAIL PROTECTED]>
wrote:
> Hi, this is my first message to the
> mailing-list. I hope that I have
> included
> enough information about the problem.
>
> The problem is that my FreeBSD 6.0 (release)
> won't use the default route
> (gateway). So I can't access anything o
--- Nicolas Blais <[EMAIL PROTECTED]> wrote:
> On January 2, 2006 04:52 pm, Sean wrote:
> > Sean wrote:
> > > Looking for recommendations on any Unix
> programming books.
> > > I have been out of things for a while so I
> would put my skill level back
> > > to the beginning.
> > >
> > >
Crispy Beef writes:
> Was wondering on average how long building userland and the
> kernel for 6.0-RELEASE should take on a 466MHz Celeron machine
> with 128Mb RAM?
Many hours. :-(
For comparison: it takes ~1h45 on a P4/2.25ghz with 512mb. I
seem to remember the 500mhz Celer
Hi Yujin,
If you want to do a fresh install of FreeBSD 6.0, I suggest that you
only download the bootonly ISO, and then do a minimal install using
FTP as source.
On 1/3/06, FlashWebHost.com <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I am using FreeBSD 5.2 on my local computer.
>
> I want to upgrade to Fr
--- JK <[EMAIL PROTECTED]> wrote:
> On Tue, 3 Jan 2006 05:18:59 -0800 (PST)
> Adam Nealis <[EMAIL PROTECTED]> wrote:
> > --- "FlashWebHost.com" <[EMAIL PROTECTED]> wrote:
> >
> >> Hi,
> >>
> >> I am using FreeBSD 5.2 on my local computer.
> >>
> >> I want to upgrade to FreeBSD 6.0
> >>
> >>
Was wondering on average how long building userland and the
kernel for 6.0-RELEASE should take on a 466MHz Celeron machine
with 128Mb RAM?
Many hours. :-(
For comparison: it takes ~1h45 on a P4/2.25ghz with 512mb. I
seem to remember the 500mhz Celeron being an overnight or all
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Danial Thom
> Sent: Tuesday, January 03, 2006 7:53 AM
> To: Nicolas Blais; freebsd-questions@freebsd.org;
> [EMAIL PROTECTED]
> Subject: Re: Programming Book(s)
>
>
>
>
> --- Nicolas Blais <[EMAIL
Christer Folkesson wrote:
Hi, this is my first message to the mailing-list. I hope that I have
included
enough information about the problem.
The problem is that my FreeBSD 6.0 (release) won't use the default route
(gateway). So I can't access anything on the internet.
[snip]
I may have snipp
First of all, lets get the terminology straightened out.
I think you mean to say that you want to add a partition to
your FreeBSD slice.
Yes.
Second, I presume you are booted to that drive. The system does
not allow you to modify the label on the boot drive. If it is the
only FreeBSD
At 07:18 AM 1/3/2006, Christer Folkesson wrote:
Hi, this is my first message to the mailing-list. I hope that I have included
enough information about the problem.
The problem is that my FreeBSD 6.0 (release) won't use the default route
(gateway). So I can't access anything on the internet.
Har
Hello -
I am running FreeBSD 6.0-STABLE as of Dec-15-2005 on a P4 system. I have a CDRW
drive attached, which identifies as follows:
acd0: CDRW at ata1-slave UDMA33
I wish to use this device to produce CDRW backup disks periodically. I use the
following commands to produce the backu
On Tue, 03 Jan 2006 12:50:38 +0100, Poul-Henning Kamp wrote:
>
> 99.9% of the computers are used by people who are not scientists and
> engineers.
>
> 99.999% of the computers do not track extra-terrestial objects.
>
> Wanna bet how the cost balances ?
>
You assume that the cost is borne indivi
+[ Frank Laszlo <[EMAIL PROTECTED]> (03.Jan.2006 12:10):
|
| Fernan Aguero wrote:
| > Hi!
| >
| > I've a dual boot machine, which was running FreeBSD-5.4 (now
| > 6.0p1) and WinXP. It has a cheap PS/2 mouse (Biswal is the
| > brand, but I guess it's just a generic mouse, details at the
| > bott
Hello,
This is my second email to this list, I got no response from the first email
I sent, I hope i'm providing enough information.
I'm currently running FreeBSD 6.0-RELEASE on my IBM Thinkpad 600e 2645-4AU
with a custom kernel. I updated the BIOS to the latest version that IBM
offers ( INET36W
ASIM.
According to the development website http://wipfw.sourceforge.net
the FBSD IPFW firewall was ported to run under MS Windows
XP/2000/2003
which are all variations of Windows NT.
It says the NATed ability is not included but is planed for later.
This FreeBSD list is not the correct place to ask
On Jan 3, 2006, at 10:46 AM, Crispy Beef wrote:
This is kind of related to my other post (Kernel Compilation), but
thought I'd post it seperately as it would be interesting to know...
Was wondering on average how long building userland and the kernel
for 6.0-RELEASE should take on a 466MHz C
Hello -
I am running FreeBSD 6.0-STABLE as of Dec-15-2005 on a P4 system. I have a CDRW
drive attached, which identifies as follows:
acd0: CDRW at ata1-slave UDMA33
I wish to use this device to produce CDRW backup disks periodically. I use the
following commands to produce the backu
On Monday 02 January 2006 10:52, fbsd_user wrote:
> here is another install guide more up to date
>
>http://www.unixguide.net/freebsd/fbsd_installguide/index.php
When I finish with getting Free BSD 6.0 I'll write another one the
same way I
did that one.
Are you claiming authorship for the
>
> Frank, thanks for your reply,
>
> this is not just a problem in xorg, it is also the mouse not
> working in the console (without X). I don't get an arrow
> cursor that I can use in the console to copy/paste text.
>
> I've tried using moused (moused_enable="YES" in rc.conf) and
> then using /dev
On 2006-01-03 12:25, fbsd_user <[EMAIL PROTECTED]> wrote:
> On Monday 02 January 2006 10:52, fbsd_user wrote:
> > here is another install guide more up to date
> >
> >http://www.unixguide.net/freebsd/fbsd_installguide/index.php
>
> When I finish with getting Free BSD 6.0 I'll write another one
--- "FlashWebHost.com" <[EMAIL PROTECTED]> wrote:
>Hi,
>Anyone know where i can purchase FreeBSD 6 CD in india ?
You can try www.linuxbazar.com for purchasing FreeBSD/Linux CDs. They
didn't have FreeBSD 6 CDs when i checked the site last time. But they
can make it available for you evenif they do
From: "FlashWebHost.com" <[EMAIL PROTECTED]>:
> There is 5.4 to 6 upgrade also at
>
> http://www.daemonology.net/freebsd-upgrade-5.4-to-6.0/
This would be a great resource, if it were sure to work. I am not
anxious to go from 5.4-STABLE to 6.0 (not until it goes stable), but I
tried to run throug
>
> From: "FlashWebHost.com" <[EMAIL PROTECTED]>:
> > There is 5.4 to 6 upgrade also at
> >
> > http://www.daemonology.net/freebsd-upgrade-5.4-to-6.0/
>
> This would be a great resource, if it were sure to work. I am not
> anxious to go from 5.4-STABLE to 6.0 (not until it goes stable), but I
>
can someone send me his e-mail?
thanks in advance
__
×ñçóéìïðïéåßôå Yahoo!;
ÂáñåèÞêáôå ôá åíï÷ëçôéêÜ ìçíýìáôá (spam); Ôï Yahoo! Mail äéáèÝôåé ôçí
êáëýôåñç äõíáôÞ ðñïóôáóßá êáôÜ ôùí åíï÷ëçôéêþí ìçíõìÜôùí
http://mail.yahoo.gr
fbsd_user wrote:
> here is another install guide more up to date
>
>http://www.unixguide.net/freebsd/fbsd_installguide/index.php
>
>
This is an excellent howto. Explains each step in detail, and highlights
key points. also shows screenshots of the entire process.
Hi,
I have installed the ports php5-mysql-5.1.1 and php5-mysqli-5.1.1
during the make, the port mysql-client-4.1.16 got installed
I need the newer version of mysql-client-5.x
When I try to install it, I get an error saying I
cannot install because mysql-client-4.1.16 is already installed.
If I
Hi,
I have installed the ports php5-mysql-5.1.1 and php5-mysqli-5.1.1
during the make, the port mysql-client-4.1.16 got installed
I need the newer version of mysql-client-5.x
When I try to install it, I get an error saying I cannot install
because mysql-client-4.1.16 is already installed.
If I
On 1/3/06, Jerry McAllister <[EMAIL PROTECTED]> wrote:
> Just a question here -- What do you mean until it goes stable?
> FreeBSD 6.0 is already at RELEASE which is beyond stable.
> So you have the terminology mangled or just the typing?
You're right: per the FreeBSD world, I've botched the two te
I have a need to remotely debug an application on a
remote FreeBSD-5.4 machine that is devoid of utilities
and source code.
I previously asked a question about gdbserver, but it
looks like it's not available so I'll ask the more
general question.
I could login in to the remote machine, mount a s
Marc Evans <[EMAIL PROTECTED]> wrote:
> I am running FreeBSD 6.0-STABLE as of Dec-15-2005 on a P4 system. I
> have a CDRW drive attached, which identifies as follows:
>
> acd0: CDRW at ata1-slave UDMA33
>
> I wish to use this device to produce CDRW backup disks periodically.
> I use the
On Tue, Jan 03, 2006 at 11:04:41AM -0500, Robert Huff wrote:
>
> Crispy Beef writes:
>
> > Was wondering on average how long building userland and the
> > kernel for 6.0-RELEASE should take on a 466MHz Celeron machine
> > with 128Mb RAM?
>
> Many hours. :-(
> For comparison: it t
On Monday 02 January 2006 22:29, Björn König wrote:
>
> Richard Kästner schrieb:
> > Hello,
> >
> > hope to find some help, hints and experience here:
> >
> > an external device expects commands and command data,
> > it produces result-codes and result data.
> > Communication is done via HTTP (and
That's what I thought too, but it doesn't seem to be the case. Here's
what I have:
ipfw -f flush
ipfw add 70 allow tcp from 10.0.1.254 to any
ipfw add accept tcp from any to any 22 in via ${ext_if}
ipfw add 6000 allow all from any to any via lo0
ipfw add 6100 allow all from any to any via ${int_if
Richard Kästner wrote:
On Monday 02 January 2006 22:29, Björn König wrote:
Richard Kästner schrieb:
Hello,
hope to find some help, hints and experience here:
an external device expects commands and command data,
it produces result-codes and result data.
Communication is done via HTTP (and w
Make sure your script is named with the extension .sh
Also, don't assume your script has a proper environment. You will do best
to use full path names to any commands.
-Derek
At 01:14 AM 1/3/2006, Mike Esquardez wrote:
Hello. I have been reading the docs but i can see what i'm doin
Sean wrote:
Sean wrote:
Looking for recommendations on any Unix programming books.
I have been out of things for a while so I would put my skill level
back to the beginning.
Thanks
Sean
___
freebsd-questions@freebsd.org ma
On Tuesday 03 January 2006 12:30, Giorgos Keramidas wrote:
> On 2006-01-03 12:25, fbsd_user <[EMAIL PROTECTED]> wrote:
> > On Monday 02 January 2006 10:52, fbsd_user wrote:
> > > here is another install guide more up to date
> > >
> > >http://www.unixguide.net/freebsd/fbsd_installguide/index.ph
Allen wrote:
I wrote this quite a while ago and I've posted it to the docs list before and
it got a good repsonce, but I've seen a couple install questions on here so
I'm going to link to it again for this list. I don't think there is an easier
to follow installer help anywhere. Not arroganc
>
> On 1/3/06, Jerry McAllister <[EMAIL PROTECTED]> wrote:
> > Just a question here -- What do you mean until it goes stable?
> > FreeBSD 6.0 is already at RELEASE which is beyond stable.
> > So you have the terminology mangled or just the typing?
>
> You're right: per the FreeBSD world, I've bot
>
>
> >First of all, lets get the terminology straightened out.
> >I think you mean to say that you want to add a partition to
> >your FreeBSD slice.
> >
> Yes.
>
> >Second, I presume you are booted to that drive. The system does
> >not allow you to modify the label on the boot drive. If
On 11/9/05, Giorgos Keramidas <[EMAIL PROTECTED]> wrote:
> On 2005-11-09 13:44, Bart Silverstrim <[EMAIL PROTECTED]> wrote:
> > On Nov 9, 2005, at 1:03 PM, Giorgos Keramidas wrote:
> > >Yes. Perl should work fine here.
> > >
> > >$ echo '1131556815.537101 172.16.2.153 TCP_HIT/200 35674 GET
On Tuesday 03 January 2006 20:20, Gary Corcoran wrote:
>
> Richard Kästner wrote:
> > On Monday 02 January 2006 22:29, Björn König wrote:
> >>Richard Kästner schrieb:
> >>>Hello,
> >>>
> >>>hope to find some help, hints and experience here:
> >>>
> >>>an external device expects commands and command
On 2006-01-03 14:05, Doug Poland <[EMAIL PROTECTED]> wrote:
> I wrote some time ago:
> >$ echo '1131556815.537101 172.16.2.153 TCP_HIT/200 35674 GET' | \
> > perl -MPOSIX=strftime \
> > -pe 'chomp; @x=split /\./; \
> > $ts = strftime "%Y-%m-%d %H:%M:%S", (localtime($x[0]
The secondary screen functionality on my xterm (rxvt-unicode) was acting
strangly. So, following the advice at:
http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html
I added an rxvt-unicode termcap entry to my termcap file and ran
cap_mkdb. After login, I'm able to 'setenv TER
Thanks Abhi for the link. I am downloading boot only ISO. I will try this
and see if i can get FreeBSD installed.
Regards,
Yujin
www.NetFreeHost.com
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-q
On Tuesday 03 January 2006 16:50, Josh Soza wrote:
> Allen wrote:
> >I wrote this quite a while ago and I've posted it to the docs list before
> > and it got a good repsonce, but I've seen a couple install questions on
> > here so I'm going to link to it again for this list. I don't think there
> >
Glenn Dawson wrote:
At 07:18 AM 1/3/2006, Christer Folkesson wrote:
Hi, this is my first message to the mailing-list. I hope that I have
included
enough information about the problem.
The problem is that my FreeBSD 6.0 (release) won't use the default route
(gateway). So I can't access anyt
On 1/2/06, fbsd_user <[EMAIL PROTECTED]> wrote:
> I see "tun" in your ipnat rule.
> That means you are using ppp for phone dialup connection.
> Every time you lose your phone connection you get different IP
from
> your ISP.
> Use NAT function of PPP and not ipnat and your problem will go
away.
>
>
Chris Hill wrote:
This led me to
http://lists.freebsd.org/pipermail/freebsd-questions/2005-December/107925.html
...which was exactly what I was looking for.
For acroread make sure you rename /usr/local/bin/acroread7
to /usr/local/bin/acroread.
Beech,
Thank you that, and especially than
Crispy Beef wrote:
Hi,
This is kind of related to my other post (Kernel Compilation), but
thought I'd post it seperately as it would be interesting to know...
Was wondering on average how long building userland and the kernel for
6.0-RELEASE should take on a 466MHz Celeron machine with 128Mb
Allen wrote:
On Tuesday 03 January 2006 16:50, Josh Soza wrote:
<..snip..>
And another mail I sent to the list today, I pointed out the reason I didn't
link tot he docs. I WANT people to BUY the books from Free BSD to help
support the project. You can't possibly think that was wrong of
>
> Allen wrote:
>
> >On Tuesday 03 January 2006 16:50, Josh Soza wrote:
> >
> <..snip..>
>
> >And another mail I sent to the list today, I pointed out the reason I didn't
> >link tot he docs. I WANT people to BUY the books from Free BSD to help
> >support the project. You can't possibly think
>
> On Tuesday 03 January 2006 16:50, Josh Soza wrote:
> > Allen wrote:
> > >I wrote this quite a while ago and I've posted it to the docs list before
> > > and it got a good repsonce, but I've seen a couple install questions on
> > > here so I'm going to link to it again for this list. I don't th
On Tuesday 03 January 2006 02:11 pm, Chris Whitehouse wrote:
> Chris Hill wrote:
> > This led me to
> > http://lists.freebsd.org/pipermail/freebsd-questions/2005-December/107925
> >.html
> >
> > ...which was exactly what I was looking for.
> >
> >> For acroread make sure you rename /usr/local/bin/a
Which is the part that does not work?
You can see the matching process by adding 'log' to the rule:
ipfw log add 70 allow tcp from 10.0.1.254 to any
Last thing to check: traffic runs both ways, so you may need to have two
rules instead of one.
- Original Message -
From: "patrick" <[E
On Tue, 3 Jan 2006, Chris Whitehouse wrote:
Chris Hill wrote:
[snip]
Beech,
Thank you that, and especially thank you for writing the "107925" post
referred to above. Your procedure worked beautifully.
Did the 107925 post work for you? it was superceded by
http://lists.freebsd.org/piperma
On Wed, 4 Jan 2006 03:37 am, Marc Evans wrote:
> Hello -
>
> I am running FreeBSD 6.0-STABLE as of Dec-15-2005 on a P4
> system. I have a CDRW drive attached, which identifies as
> follows:
>
> acd0: CDRW at ata1-slave UDMA33
>
> I wish to use this device to produce CDRW backup disks
> perio
On Wed, 4 Jan 2006 07:34 am, E. Eusey wrote:
> The secondary screen functionality on my xterm (rxvt-unicode)
> was acting strangly. So, following the advice at:
>
> http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.
>7.html
>
> I added an rxvt-unicode termcap entry to my termcap file a
If you play a movie file from the hard disk does the same thing happen?
Is this full screen or not?
What is the laptop make and model?
Ted
>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
>Sent: Monday, January 02, 2006 10:37 PM
>To: f
On Wed, 4 Jan 2006 03:29 pm, Malcolm Kay wrote:
> On Wed, 4 Jan 2006 07:34 am, E. Eusey wrote:
> > The secondary screen functionality on my xterm
> > (rxvt-unicode) was acting strangly. So, following the
> > advice at:
> >
> > http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxv
> >t. 7.ht
Malcolm Kay wrote:
On Wed, 4 Jan 2006 03:29 pm, Malcolm Kay wrote:
Seems this applies to both rxvt and urxvt, To target urxvt
specifically use:
URxvt*termName: rxvt-unicode
Looking at the Makefile in the rxvt-unicode port I find:
CONFIGURE_ARGS= --enable-shared --enable-everything \
El día Tuesday, January 03, 2006 a las 09:05:23PM -0800, Ted Mittelstaedt
escribió:
>
> If you play a movie file from the hard disk does the same thing happen?
Interestingly it only happens with Mplayer but not with ogle; before
yesterday I could not use ogle because the one from the ports coll
90 matches
Mail list logo
