Re: Counter-Strike, Wine and FreeBSD

I use wine-20050725 from ports. You know, I also have problems with fonts in CS. Sometimes they all work flawlessly, sometimes squares are displayed instead of some of them - but it has nothing to do with wine fonts or X fonts, because all fonts in CS are bitmap files located somewhere in the valve

Re[2]: i can't block win98 computers

Thanks all for reply! Now: 1. i try to permit only good mac and deny any else but not work. Win98 still have internet. 2. one solution is probably to block acces for win98 computers to any on port 53 and block in this mode DNS service, but is a little strange this solution. 3. i dont understand

usb flash memory

dear all, anyone has success using epraizer usb flash memory type 501 http://www.epraizer.com.tw/products/productFlashMemo.html on FreeBSD-5.4-STABLE or 6.0-BETA ? I always getting: da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0:

atacontrol

I have a simple question. Some time ago I was told always to use the same type of harddisk transfers. Now I have i.e.: Master = UDMA100 Slave = UDMA66 Does this mean the first disk really works on UDMA100 or is is delayed by the second one (as I was told some time ago). Or is the fbsd ata cont

Re: How to Force UDMA100 Mode on Boot?

Chuck Swiger wrote: Your BIOS ought to have a setting which throttles this down. From what I see in the BIOS it just says "DMA Mode" and then Enabled or Disabled. Unfortunately it doesnt look like any drive-specific options to choose which speed. Simply changing in within FreeBSD might be a

Re: How to Force UDMA100 Mode on Boot?

On 8/16/05, Kent Stewart <[EMAIL PROTECTED]> wrote: ... > There used to be a Maxtor utility that would set the maximum ATA rate on > Maxtor ATA drives. I had one of those motherboard with a broken > Southbridge and that was the easy way out until I replaced the > motherboard with a good one. If you

Re: [Fwd: ipf sample rule file]

On 2005-08-14 09:03, Dave Webster <[EMAIL PROTECTED]> wrote: > Date: Sun, 14 Aug 2005 07:54:39 -0700 > From: Dave Webster <[EMAIL PROTECTED]> > Subject: ipf sample rule file > To: "FBSD_IG "@a1poweruser.com > > Thank you for your tremendous guide for FreeBSD newbies. I am > confused by: > # Allow

Re: Creating standalone passwords in /etc/passwd format

I have had a look at crypt (enigma), but it doesn't appear to use the same algorithm? I need the same as that used in passwd! Thanks On 8/15/05, Gareth Bailey <[EMAIL PROTECTED]> wrote: > Hi there, > > I am using pserver for authentication on CVS. Rather than use the same > passwords as in /etc/

Re: Power Off with ATX board wont work...

As the Server is back online I checked the configuration and saw that the shutdown script, witch is triggered from a html page did use "halt", but changing this to "shutdown -p now" did not help. "apm" is enabled. Does anyone have any other ideas how to resolve this, or is it definitely a hardware

Nightly backup using CD-ROM

Hi all, I found a post from last November with a small script for backing up to CD-ROM with sessions. http://lists.freebsd.org/pipermail/freebsd-questions/2004-November/064117.html My question is how can I access the data on the CD between backups without having to run fixate? It obviously doe

ath driver within 5.4-RELEASE

Hi I just wanted to know if the ath driver is included within the 5.4-RELEASE as I can't seem to find it with the GENERIC config or do I just load auth with kldload ? I can't check as I'm not at home atm. Thanks in advance Glyn - Email sent from www.ntlwor

Re: ftp security

> > I read http://www.freebsddiary.org/ftp-anonymous.php to try and secrue my ftp > server. > The author sugested to add a line to my fstab: > > /dev/ad2s2f /home/ftp/incoming ufs rw,SUIDDIR2 2 > > however i don't have the file ad2s2f in my /dev directory > > # Device

Re: differences in supported filesystems between FreeBSD versions

Glenn Dawson wrote: Even if there were, if the file systems you are using now are working, there isn't much reason to change them. UFS2 expanded some fields from 32 bits to 64, and added or changed a few features, but the two are still very similar. UFS2 also added snapshots which make live

Re: disk fragmentation, <0%?

Don't top-post, please. Lei Sun <[EMAIL PROTECTED]> writes: > Then, my other question is, > > If the file space allocation works like Glenn said earlier, how come > with the exact same files from 2 different installations using the > exact procedures, can result in different fragmentation? > >

Re: i can't block win98 computers

vladone wrote: Thanks all for reply! Now: 1. i try to permit only good mac and deny any else but not work. Win98 still have internet. 2. one solution is probably to block acces for win98 computers to any on port 53 and block in this mode DNS service, but is a little strange this solution. Whe

resolv.conf

Hi list, I'm new to FreeBSD, and this is the first time I configure a FreeBSD box. Ok, let's get to the point: my problem is with DNS resolution, form some reason the resolv.conf changes after some time (10 to 20 minutes), from my DNS IP to the rl0 IP. Does any one know why? My machine is an A

Re: Creating standalone passwords in /etc/passwd format

Please don't top-post. Gareth Bailey <[EMAIL PROTECTED]> writes: > I have had a look at crypt (enigma), but it doesn't appear to use the > same algorithm? Correct. > I need the same as that used in passwd! The algorithm is selectable; the mechanism is crypt(3). The standard ut

Re: resolv.conf

"Ronny Machado C." <[EMAIL PROTECTED]> writes: > Hi list, > > I'm new to FreeBSD, and this is the first time I configure a FreeBSD box. Ok, > let's get to the point: my problem is with DNS resolution, form some reason > the resolv.conf changes after some time (10 to 20 minutes), from my DNS IP

RE: resolv.conf

yep bro...that's it... -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de Lowell Gilbert Enviado el: Martes, 16 de Agosto de 2005 10:02 Para: Ronny Machado C. CC: freebsd-questions@freebsd.org Asunto: Re: resolv.conf "Ronny Machado C." <[EMAIL PROTECTED]> writes

Re: differences in supported filesystems between FreeBSD versions

In the last episode (Aug 16), Alex Zbyslaw said: > Glenn Dawson wrote: > >Even if there were, if the file systems you are using now are > >working, there isn't much reason to change them. > > > >UFS2 expanded some fields from 32 bits to 64, and added or changed a > >few features, but the two are st

screen grabs

Hi, I wondered if anyone can advise me about how to get screen shots / grabs of the FreeBSD installation screens as shown in the online manual, etc. I can use The Gimp’s resources to do screen shots with everything installed, but this wouldn’t be available at the installation phase. Charles Smyt

multicore Intel

Hi, Will FreeBSD still be functional with the new crop of Intel dual and multicore processors, when they become more available and replace single core processors. Charles Smyth ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/m

Re: screen grabs

El día martes, agosto 16, 2005 a las 03:34:44 +0100, Charles Smyth escribió: > Hi, > > I wondered if anyone can advise me about how to get screen shots / grabs of > the FreeBSD installation screens as shown in the online manual, etc. I can use > The Gimp’s resources to do screen shots with everyt

dump & restore question

Hello, I maked two dumps of root filesystem with dump(8): - the first of level 0 (all files) - the second of level 3 on the next day after level 0 (all files new or modified since dump of level 0 or level 3) Now I'm trying to restore filesystem with restore(8): cat dump0 | (cd /mnt/ad0s1a && r

Re: screen grabs

On Tue, Aug 16, 2005 at 03:34:44PM +0100, Charles Smyth wrote: > I wondered if anyone can advise me about how to get screen shots / grabs of > the FreeBSD installation screens as shown in the online manual, etc. I can use > The Gimp’s resources to do screen shots with everything installed, but thi

Re: resolv.conf

Ronny, It sounds as though this is something to do with the DHCP client software, which can be configured through /etc/dhclient.conf. Something like the following might be a workaround, but I'm not an experienced user of PPPoE and may be barking up the wrong tree. interface "rl0" { prepend d

Re: screen grabs

On Tue, 16 Aug 2005 15:34:44 +0100 "Charles Smyth" <[EMAIL PROTECTED]> wrote: > Hi, > > I wondered if anyone can advise me about how to get screen shots / > grabs of the FreeBSD installation screens as shown in the online > manual, etc. I can use The Gimp’s resources to do screen shots with > eve

Re[2]: i can't block win98 computers

My server has an Athlon XP CPU at 1.6 Ghz with 256 mb ram. Don't believe that this is the reason for which don't goes tcpdump. Every client has his ip, but i want to prevent illegal connections, and this can be changed. ___ freebsd-questions@freebsd.org

Strange problem with DHCPD

i recently installed net/isc-dhcp3-serverport on my server and when i try to start the service from his script /usr/local/etc/rc.d/isc-dhcpd.sh start he doesn't start. But if i try /usr/local/sbin/dhcpd he work fine. Why ?

Re[3]: i can't block win98 computers

> My server has an Athlon XP CPU at 1.6 Ghz with 256 mb ram. > Don't believe that this is the reason for which don't goes tcpdump. > Every client has his ip, but i want to prevent illegal connections, > and this can be changed. - Changing the MAC is no

Re: Strange problem with DHCPD

> i recently installed > net/isc-dhcp3-serverport > on my server and when i try to start the service from his script > /usr/local/etc/rc.d/isc-dhcpd.sh start he doesn't start. > But if i try /usr/local/sbin/dhcpd he work fin

Re: i can't block win98 computers

vladone wrote: My server has an Athlon XP CPU at 1.6 Ghz with 256 mb ram. Don't believe that this is the reason for which don't goes tcpdump. That ought to work. Still, every time I've seen tcpdump dropping packets, it's a load issue. For some options you could test to improve tcpdump perform

Re: swap file using gmirror?

bob self wrote: I ran swapinfo: Device1K-blocks Used Avail Capacity /dev/mirror/gm0s1b 31457280 3145728 0% So, I have swap space? Yes, 3GiB. bye av. ___ freebsd-q

Re: resolv.conf

. - Original Message - From: "Ronny Machado C." <[EMAIL PROTECTED]> To: Sent: Tuesday, August 16, 2005 8:54 AM Subject: resolv.conf Hi list, I'm new to FreeBSD, and this is the first time I configure a FreeBSD box. Ok, let's get to the point: my problem is with DNS resolution, fo

Re: Help with xorg.conf

[EMAIL PROTECTED] writes: > However none of them have an effect! Please help! Adding to what others have said.. You can learn a lot by looking at (something like): /var/log/Xorg.0.log If your monitor and controller are fairly new, you should find info about their possible (and actual) settings

Re: multicore Intel

On 8/16/05, Charles Smyth <[EMAIL PROTECTED]> wrote: > Hi, > > Will FreeBSD still be functional with the new crop of Intel dual and multicore > processors, when they become more available and replace single core > processors. > > I don't see why not as this should all be transparent to the ope

Re: disk fragmentation, <0%?

On Sun, Aug 14, 2005 at 01:30:41PM -0700, Glenn Dawson wrote: > From the original message: > > Filesystem SizeUsed Avail Capacity Mounted on > /dev/ar0s1e248M -278K228M-0%/tmp > > This shows that /tmp is empty. If the reserved space was being encroached > upon, it w

Re: ath driver within 5.4-RELEASE

On 8/16/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Hi > I just wanted to know if the ath driver is included within the 5.4-RELEASE as > I can't seem to find it with the GENERIC config or do I just load auth with > kldload ? > I can't check as I'm not at home atm. > Thanks in advance > Gly

Stable server

what version of freebsd do u recomand for a stable server? -- Any help would be greatly appreciated. regards, Carstea Catalin ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, sen

Re: atacontrol

On 8/16/05, Dick Hoogendijk <[EMAIL PROTECTED]> wrote: > I have a simple question. Some time ago I was told always to use the > same type of harddisk transfers. Now I have i.e.: > > Master = UDMA100 > Slave = UDMA66 > > Does this mean the first disk really works on UDMA100 or is is delayed > by

Re: Power Off with ATX board wont work...

On Tue, 16 Aug 2005, Christian Tischler wrote: As the Server is back online I checked the configuration and saw that the shutdown script, witch is triggered from a html page did use "halt", but changing this to "shutdown -p now" did not help. "apm" is enabled. apm is enabled where? In your ke

Re: Stable server

Carstea Catalin wrote: what version of freebsd do u recomand for a stable server? I'd say 5.4-RELEASE...that's the current "production release". -Mark ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-q

Re: Stable server

On 8/16/05, Carstea Catalin <[EMAIL PROTECTED]> wrote: > what version of freebsd do u recomand for a stable server? > 5.x ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any

Re: ath driver within 5.4-RELEASE

On Tue, 16 Aug 2005 13:36:14 -0500 Nikolas Britton <[EMAIL PROTECTED]> wrote: > On 8/16/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> > wrote: > > Hi > > I just wanted to know if the ath driver is included within the 5.4- > > RELEASE as I can't seem to find it with the GENERIC config or do I > > just

Re: Stable server

On Tue, 16 Aug 2005, Carstea Catalin wrote: > what version of freebsd do u recomand for a stable server? 4.11 is solid, hasn't shown any problems here. 5.4 is the best of the 5.x series but we (I mean at my company, not speaking as a FreeBSD rep) haven't put it through as much stress as we have 4

i386 compatibility under amd64

Hello, If I try to run an i386 binary uner amd64 I get this: ELF interpreter /libexec/ld-elf32.so.1 not found Abort trap I have options COMPAT_IA32 in my kernel config file but I don't know what should I do besides this. Cheers, Gabor Kovesdan ___

DHCP Issue - could not get ip.

Hello. I have a problem with DHCP, i've tried to solve googling, reading post on forums. I have a DHCP cable modem connection. in rc.conf i have ifconfig_vr0="DHCP" when i launch dhclient -d vr0 i get: I've tried differend things, like setting the nic for 10 mbps, half-dupplex, reseting the

Re: DHCP Issue - could not get ip.

> Hello. > I have a problem with DHCP, i've tried to solve googling, reading post > on forums. > I have a DHCP cable modem connection. > in rc.conf i have ifconfig_vr0="DHCP" > when i launch dhclient -d vr0 i get: > I've tried differend things, like setting the nic for 10 mbps, > half-dupplex

Re: cache-only named won't resolve "localhost"

e just added some observations. $TTL 604800 localhost. IN SOA localhost. root.localhost. ( 20050816 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; E

Re: ath driver within 5.4-RELEASE

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Andrew L. Gould wrote: > On Tue, 16 Aug 2005 13:36:14 -0500 > Nikolas Britton <[EMAIL PROTECTED]> wrote: > > >>On 8/16/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> >>wrote: >> >>>Hi >>>I just wanted to know if the ath driver is included within the 5.4-

Raid / Dual booting / Really need help.

Hey guys -- First off let me give you inisght on my hardware. CPU: 3400 AMD 64 MB: Asus A8n-SLI Deluxe Video: Nvidia 6600 GT Ram: 3gigs Crucial HD: (2) SATA Hitachi 80gig Drives RAID: ONBOARD: Silicon Image Sil 1334 Raid Controller ONBOARD: Nvidia Southbridge Raid Controller My Prob

Installing Firefox (was: Question)

jon freddy <[EMAIL PROTECTED]> writes: > When I get my new computer and I am going to run FreeBSD, also, I > want to still run the browser Firefox. Chapter 4 of the Handbook deals with "Installing Applications" on FreeBSD: Ch

Re: ath driver within 5.4-RELEASE

Glyn Tebbutt wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Andrew L. Gould wrote: > > On Tue, 16 Aug 2005 13:36:14 -0500 > > Nikolas Britton <[EMAIL PROTECTED]> wrote: > > > > > >>On 8/16/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> > >>wrote: > >> > >>>Hi > >>>I just wanted to know

Problems with rsync 2.66 on freebsd

Hello , i'm on freebsd 5.4 and i have a problem with rsync 2.66.When i do "rsync -r /backups/bsd1 --delete [EMAIL PROTECTED]:backups" i have that : # rsync -r /backups/bsd1 --delete [EMAIL PROTECTED]:backups rsync: Commande introuvable. rsync: connection unexpectedly closed (0 bytes received so f

Problems with rsync 2.66 on freebsd

Hello , i'm on freebsd 5.4 and i have a problem with rsync 2.66.When i do "rsync -r /backups/bsd1 --delete [EMAIL PROTECTED]:backups" i have that : # rsync -r /backups/bsd1 --delete [EMAIL PROTECTED]:backups rsync: Commande introuvable. rsync: connection unexpectedly closed (0 bytes received so f

Re: ath driver within 5.4-RELEASE

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Michal Mertl wrote: > Glyn Tebbutt wrote: > >>-BEGIN PGP SIGNED MESSAGE- >>Hash: SHA1 >> >>Andrew L. Gould wrote: >> >>>On Tue, 16 Aug 2005 13:36:14 -0500 >>>Nikolas Britton <[EMAIL PROTECTED]> wrote: >>> >>> >>> On 8/16/05, [EMAIL PROTECT

Re: ath driver within 5.4-RELEASE

Glyn Tebbutt wrote: > Michal Mertl wrote: > > > > I don't know if 5.4 supports 11g but it I know it doesn't support too > > much advanced authentication mechanisms (WPA). > > > > I believe you need not only ath and ath_hal in the kernel config file > > but also wlan and some ath_rate module (one

Re: DHCP Issue - could not get ip.

Ovidiu Ene wrote: Hello. I have a problem with DHCP, i've tried to solve googling, reading post on forums. I have a DHCP cable modem connection. in rc.conf i have ifconfig_vr0="DHCP" when i launch dhclient -d vr0 i get: I've tried differend things, like setting the nic for 10 mbps, half-du

Re: ath driver within 5.4-RELEASE

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Michal Mertl wrote: > Glyn Tebbutt wrote: > >>Michal Mertl wrote: >> >>>I don't know if 5.4 supports 11g but it I know it doesn't support too >>>much advanced authentication mechanisms (WPA). >>> >>>I believe you need not only ath and ath_hal in the k

Re: ath driver within 5.4-RELEASE

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Michal Mertl wrote: > Glyn Tebbutt wrote: > >>Michal Mertl wrote: >> >>>I don't know if 5.4 supports 11g but it I know it doesn't support too >>>much advanced authentication mechanisms (WPA). >>> >>>I believe you need not only ath and ath_hal in the k

Re: Power Off with ATX board wont work...

Warren Block wrote: > On Tue, 16 Aug 2005, Christian Tischler wrote: > >> As the Server is back online I checked the configuration and saw that >> the shutdown script, witch is triggered from a html page did use "halt", >> but changing this to "shutdown -p now" did not help. >> "apm" is enabled. >

Re: Stable server

Carstea Catalin <[EMAIL PROTECTED]> writes: > what version of freebsd do u recomand for a stable server? The Handbook recommends against using a stable branch (RELENG_5 or RELENG_4, which might not even compile) without first thoroughly testing the code in your development environment. B

Re: Stable server

On Tue, 16 Aug 2005, dpk wrote: > On Tue, 16 Aug 2005, Carstea Catalin wrote: > > > what version of freebsd do u recomand for a stable server? > > 4.11 is solid, hasn't shown any problems here. 5.4 is the best of the 5.x > series but we (I mean at my company, not speaking as a FreeBSD rep) > haven

Aggregated bandwidth

Hello, I have an extra box laying around that I would like to experiment with aggregating cable modem bandwidth. I have 3 nics and 3 cable modems and I would to know if there any way or any app that I can use to combine all 3 modems into one 4.5 meg service. What about upstream also? This email is

Re: How to Force UDMA100 Mode on Boot?

Mark Kane wrote: Hi, thanks for the response. The thread somehow got broken up due to some subject formatting (there was a space inserted somehow). Here are the threads: http://lists.freebsd.org/mailman/htdig/freebsd-questions/2005-August/095212.html http://lists.freebsd.org/mailman/htdig/f

Re: How to Force UDMA100 Mode on Boot?

jason wrote: I checked the links and saw no dmesg or drive models for all drives. I can tell you UDMA 133 was not an official spec, a least at first. It was a maxtor only thing, and not all chipsets handled it. Basically maxtor tightened the timings on the ide cable signals to squence extra da

Re: After Partitioning a Drive: WARNING - WRITE_DMA UDMA ICRCerror (retrying request)

OK. Now I really am at a loss for words. I experienced my first FAILURE message this morning when trying to fdisk my last newly formatted 160GB drive. The second fdisk would start to write, my screen would fill with WRITE_DMA WARNINGS and FAILURES. That was with another drive on the same contro

/usr/src 'make buildworld' problem

#uname -a FreeBSD uplink-rtr-pta.virtek.co.za 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 When I run a 'make buildworld' I get this error... -- >>> stage 1.1:

Re: Creating standalone passwords in /etc/passwd format

On Tue, 16 Aug 2005 18:07:06 +0800, Gareth Bailey <[EMAIL PROTECTED]> wrote: I have had a look at crypt (enigma), but it doesn't appear to use the same algorithm? I need the same as that used in passwd! Thanks Try making a PERL script with the following lines... $UserDetails{EncryptedPassw

pdftotext binary

I am using PowWeb for my hosting. They are using FreeBSD Unix 5.13 for their systems. I need pdftotext binaries to upload to their server. Can anyone point me to these binaries? Thanks - Start your day with Yahoo! - make it your home page _

Where is the emulators/vmware3 tarball?

Where should I look for the emulators/vmware3? The port is looking to find it on various conxion.com servers which give Permission denied and it can't be found in ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/ either. ___ freebsd-questions@freebsd.org mai

Re: pdftotext binary

Rodney Phillips wrote: I am using PowWeb for my hosting. They are using FreeBSD Unix 5.13 for their systems. Hmm, really? The last 5.X release was 5.4, and 6.0 is on the way, so I doubt FreeBSD will ever reach 5.13 - and, if it does, it'll likely be in 2008-2009 or so. You might want to

Re: Stable server

On 8/16/05, dpk <[EMAIL PROTECTED]> wrote: > On Tue, 16 Aug 2005, Carstea Catalin wrote: > > > what version of freebsd do u recomand for a stable server? > > 4.11 is solid, hasn't shown any problems here. 5.4 is the best of the 5.x > series but we (I mean at my company, not speaking as a FreeBSD

Fwd: How to limit the nat's stream speed?

Good,I use your method to solute the problem,i do like this: add dummynet_enabe="YES" to /boot/loader.conf then add these lines to /etc/rc.firewall: ${fwcmd} add pipe 1 ip from ${inet} to any out limit src-addr 400 ${fwcmd} add pipe 2 ip from any to ${inet} in limit src-addr 400

MS 9129 wont boot 5.4CD but will 4.11

Hi We have a microstar model ms9211 1ru server with p4 1.3 512mb ram... Mobo ms 9129 Ver 1 It boots all other cd's inc many other os's inc freeBSD 4.10 [ which was running fine for a long time on this box ] With 5.4 it doesn't even boot the CD WB Fasttrack "lite" Bios 2.00.1030.27 S

RE: resolv.conf

just set the resolv.conf read-only, that should take care of it. Ted >-Original Message- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] Behalf Of Ronny Machado >C. >Sent: Tuesday, August 16, 2005 7:07 AM >To: freebsd-questions@freebsd.org >Subject: RE: resolv.conf > > >yep bro...that

Re: pdftotext binary

On Tue, Aug 16, 2005 at 09:26:45PM -0500, Kevin Kinsey wrote: > Rodney Phillips wrote: > > >I am using PowWeb for my hosting. They are using > >FreeBSD Unix 5.13 for their systems. > > > > > > Hmm, really? The last 5.X release was 5.4, and 6.0 is > on the way, so I doubt FreeBSD will ever rea

Re: MS 9129 wont boot 5.4CD but will 4.11

Chris Ryan <[EMAIL PROTECTED]> writes: > starts all normally until the boot from CD:. I would first boot another unixy OS off HDD or Live CD and compute the md5 checksum of the CD (maybe using "dd bs=2k ..." once to "size" the CD and once to exclude that last two blocks) and compare with the

Recommend a file manager

Hey everyone, I run Fluxbox and I'm looking for an efficient, complete and good looking file manager. Any suggestions? Thanks GarethNo virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.10.10/73 - Release Date: 15/08/2005 ___

Re: Recommend a file manager

On Wed, 17 Aug 2005 13:53:17 +0800, Campbells <[EMAIL PROTECTED]> wrote: Hey everyone, I run Fluxbox and I'm looking for an efficient, complete and good looking file manager. Any suggestions? Thanks Gareth Use the following, ls, cd, rm, mkdir, rmdir, chmod, chown, chflags, getfacl

CVS_Upgrade from 5.3 to 5.4 problem

Hello. Yesterday I try to full upgrade my server from 5.3-STABLE to 5.4-STABLE. I made it with instructions from http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html Everything was ok, before "make installworld", that I make in SingleUser mode. I get an error: # make instal