hi. im trying to install freebsd 5.1 to my alpha's. im new to all this but im pretty
sure ive done things properly so im sort of confused. here goes..
i downloaded the kern.flp and mfsroot.flp using an ftp client in binary mode. i used
brand new disks which i formatted freshly before using bo
Hello everybody,
I'm sorry for the long mail, but I really need your help. Please read it
before removing :-)
I just have my new kernel (where I disabled almost SCSI devices) but during
start-up there are errors as follows:
config> di pcic0
No such device: pcic0
Invalid command or syntax. Type
On Thu, 14 Aug 2003, Scott Schappell wrote:
> I have a question regarding whether or not I need to upgrade my system, and
> if so, what's the best way to do it to minimize downtime.
>
> uname output:
>
> bash-2.05b$ uname -a
> FreeBSD arthur.silvertree.org 4.8-RELEASE FreeBSD 4.8-RELEASE #1: Sat A
On Fri, Aug 15, 2003 at 09:19:52AM +0200, SUPPORT wrote:
> Hello everybody,
>
> I'm sorry for the long mail, but I really need your help. Please read it
> before removing :-)
>
> I just have my new kernel (where I disabled almost SCSI devices) but during
> start-up there are errors as follows:
>
dear list,
i'm in the progress of building a little box (P200MMX, 64MB, ...) as my home
DHCP/DNS/...-server.
since i have an old Samtron SC-431VS i'd like to use. unfortunatelly i don't
have the manual and therefore don't know the specs i'd need to get X up and
running (horizontal refresh, vertica
I found this for the SC-431SVC. Not your exact model but probably close
enough.
H Freq/ V Freq: 31.5/35.2/35.5 khz / 90 hz
http://www.monitorworld.com/Monitors/samtron/sc431svc.html
I have to ask though...why would you want X on a DNS/DHCP server?
- Original Message -
From: <[EMAIL P
What program was used to convert the image used for the logo screensaver to a C
source file?
Kyle
-
This mail sent through IMP: http://horde.org/imp/
___
[EMAIL PROTECTED] mailing list
http://lists.free
On Thu, 14 Aug 2003 15:51:56 -0400, "fbsd_user"
<[EMAIL PROTECTED]> said:
> Your ppp.conf has line rap for set dial command. Line following set
> dial is part of the set dial command and can not start in pos 1.
> Go back to the original sample ppp.conf and correct you line rap
> errors and test ag
Hey Peter,
To get rid of the error messages on boot up, you can remove devices you are
not using from /boot/kernel.conf.
Joey
Hello everybody,
I'm sorry for the long mail, but I really need your help. Please read it
before removing :-)
I just have my new kernel (where I disabled almost SCSI de
J,
I had the same problem for a while and gave up on the floppies. I created
a bootable CD-ROM and booted from it through the SRM console. There are
bootable ISO's in the ALPHA/ directory on the ftp.freebsd.org (and
mirrors) server.
In the SRM I found out which drive was the CD-ROM and told the
Bonjour,
j'ai similaire..
Va voir sur http://www.fli4l.de
Y'a tout ce qu'il te faut.
mess-mate
On Thu, 14 Aug 2003 22:13:16 +0200
Pierrick Brossin <[EMAIL PROTECTED]> wrote:
| On Thu, 7 Aug 2003 22:38:01 +0200
| "jean-pol" <[EMAIL PROTECTED]> wrote:
|
| > je souhaiterai utiliser mon vieux pc(333
I'm running the exim-mysql package on FreeBSD 4.7 and using the deprecated
exiscan patch for virus scanning.
I am now trying to upgrade my exim installation from exim-mysql-4.20_1 to the
latest exim-mysql-4.21_1, so as to use the new exiscan-acl patch and make use
of the new exim 4.21 features.
I
Ranish Partition Manager has become an actual boot loader as well. The
latest "beta" version supports any size hard drive with up to something
like 30 primary partitions. It, of course, has to store the additional
partition information in a seperate "Ranish Partition Manager" partition.
(Suggested
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Donnerstag, 14. August 2003 21:00 Viktor Lazlo wrote:
> > > Is there a command to browse files by pages? When ever I ls in a
> If you are new to the shell and looking for something to ease the
> transition between Windows and the console try insta
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello everybody,
Since my ISDN-card does not work on FreeBSD (so far), I am unable to connect
to the internet from FreeBSD, so I am largely unable to access the ports tree.
Now I got hold of a six-CD-set of NetBSD-1.6 + lots of packages. I installed
I'm having a problem with imap not working from a remove location
and getting PAM errors:
Aug 15 13:40:27 server1 imapd[7393]: unable to dlopen(/usr/lib/pam_unix.so)
Aug 15 13:40:27 server1 imapd[7393]: [dlerror: /usr/lib/libutil.so.3: Undefined
symbol "mac_is_present"]
Aug 15 13:40:27 server1 im
Hi
Before adding my Fat32-Partitions to /etc/fstab I have tried to mount them
manually. All Partitions work except one whis is a primary fat16 partition
on my first drive.
This is the error message :
[EMAIL PROTECTED] /mnt mount -t msdos /dev/ad0s1 C
Next free cluster in FSInfo (4294967295) exc
> /dev/ad4s1 /mnt/I msdos rw 0 0
Oh and another thing : What entries do I have to make so that users can
access these partitions and read/write on them ?
Bye
Stefan
___
[EMAIL PROTECTED] mailing list
http://
just follow the instructions in /usr/share/{Makefile,UPDATING} to update
your system:
# For individuals wanting to upgrade their sources (even if only a
# delta of a few days):
#
# 1. `cd /usr/src' (or to the directory containing your source tree).
# 2. `make buildworld'
# 3. `make buildk
Hi,
I'd also troubles to configure my isdn card.
So, I've installed fli4l from http://www.fli4l.de
and all pbs disappeared :)
take a look
mess-mate
On Fri, 15 Aug 2003 18:27:50 +0200
Benjamin Walkenhorst <[EMAIL PROTECTED]> wrote:
|-BEGIN PGP SIGNED MESSAGE-
|Hash: SHA1
|
|Hello everybod
I am trying to have DHCP 3.1rc11 from ports provide dhcp for 18 different vlans. It
detects the first 14 vlans without difficulty, then just flatly ignores each
additional vlan through vlan 18. I have created a separate config file with
definitions for just the networks on vlans 14-18, and dhcpd
Hi,
FreeBSD 4.8-RELEASE, no gui.
In Linux, I can left-drag to select text in the console, then
right-click to paste it to the command line.
My FreeBSD Unleashed book says the mouse can be configured to copy and
paste from the console in FreeBSD, but darned if I can figure out how to
do it.
I've
> Hey Peter,
>
> To get rid of the error messages on boot up, you can remove
> devices you are
> not using from /boot/kernel.conf.
Is there a list of devices and device names I can read in case I don't
know what bt0 might be?
___
[EMAIL PROTECTED]
Charles Howse wrote:
Hi,
FreeBSD 4.8-RELEASE, no gui.
In Linux, I can left-drag to select text in the console, then
right-click to paste it to the command line.
My FreeBSD Unleashed book says the mouse can be configured to copy and
paste from the console in FreeBSD, but darned if I can figure o
Charles Howse wrote:
Hey Peter,
To get rid of the error messages on boot up, you can remove
devices you are
not using from /boot/kernel.conf.
Is there a list of devices and device names I can read in case I don't
know what bt0 might be?
___
[EMAI
Hi,
Charles Howse wrote:
[...]
Is there a list of devices and device names I can read in case I don't
know what bt0 might be?
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/conf/NOTES?rev=1.1149&content-type=text/x-cvsweb-markup&only_with_tag=RELENG_5_1
(or the corresponding file beyond /usr/s
> You can look in the LINT kernel configuration file. For i386
> this is in:
> /usr/src/sys/i386/conf/LINT
OK, I get it now
My kernel.conf has (comments are mine):
Di pcic0
Di bt0
Di aic0
Di aha0
Di adv0
# Don't initialize at boot any of the devices
above
En sn0
> Hi there,
Hi, thanks for the reply.
> I have a Logitech trackman marble + (two buttons and a third that is
> also the wheel) and I just left-drag then middle button (the wheel)
> click. You might have the same thing if you have a wheel on
> yours if not
> then you should be able to press bo
On Friday 15 August 2003 02:16, Magnus J wrote:
> Hello
>
>
> Running /usr/local/etc/cvsup/update.sh manually caused the
> machine to reboot. Unfortunately, /var/log/cvsup.log doesn't
> provide any information about why.
>
> Any recommendation on what I should use to get more messages?
Have you tr
On Fri, 15 Aug 2003, Charles Howse wrote:
> FreeBSD 4.8-RELEASE, no gui.
>
> In Linux, I can left-drag to select text in the console, then
> right-click to paste it to the command line. My FreeBSD Unleashed book
> says the mouse can be configured to copy and paste from the console in
> FreeBSD
Charles Howse wrote:
Hi there,
Hi, thanks for the reply.
I have a Logitech trackman marble + (two buttons and a third that is
also the wheel) and I just left-drag then middle button (the wheel)
click. You might have the same thing if you have a wheel on
yours if not
then you should be abl
Hi Markie,
On Mon, 11 Aug 2003 11:25:49 +0100
"Markie" <[EMAIL PROTECTED]> wrote:
|Try changing moused_enable="YES" to moused_enable="NO" in '/etc/rc.conf' and
|then changing the following section in '/etc/X11/XF86Config'
|
|So that it looks something like
|
Ok, I changed it to this and it works
Hi,
>I am trying to have DHCP 3.1rc11 from ports provide dhcp for 18 =
>different vlans. It detects the first 14 vlans without difficulty, then =
>just flatly ignores each additional vlan through vlan 18. I have created =
>a separate config file with definitions for just the networks on vlans =
>
> For the sake of testing, put the mouse directly to the FreeBSD system
> and reboot (well you might not actually have to reboot but
> check to see
> if moused is running and if so kill it and then restart it).
That worked fine. The problem must be the KVM, as I suspected.
Knowing that, I reco
Hello all,
I am having a problem with apache. When I try to start or restart apache
using apachectl i get the following message.
Limits: invalid user 'www'
Usage: [a list of switches]
httpd: bad user name www
When I do apachectl configtest I get the same message.
I have looked at /etc/group,
Also, if it helps, I'm running 5.1 release.
On Thursday 14 August 2003 08:04 pm, you wrote:
> A little update... The controller is actually an SX4000. SOrry I was going
> from memory.
>
> I've tried the kernen config option:
>
> device pst
>
> as this is labelled for ata raid controllers, but sti
GNorm <[EMAIL PROTECTED]> writes:
> I am having a problem with apache. When I try to start or restart
> apache using apachectl i get the following message.
>
> Limits: invalid user 'www'
> Usage: [a list of switches]
> httpd: bad user name www
>
> When I do apachectl configtest I get the same
"Elliot Finley" <[EMAIL PROTECTED]> writes:
> I just cvsupped a 5.1-Release machine using a tag of 'tag=RELENG_5_1'. I
> thought that that tag was supposed to be 5.1-Release+security-updates. But
> when I log in, I see '5.1-CURRENT (hostname) #0'. There were also a _lot_
> of config files chang
"Charles Howse" <[EMAIL PROTECTED]> writes:
> Below is a portion of netstat -an.
> Notice that my pop server (popa3d) is listening on all interfaces.
>
> tcp4 0 0 *.110 *.*
> LISTEN
>
> I really don't need this, not doing any internet pop'ing, just doing LAN
> mail.
"KEW Martin" <[EMAIL PROTECTED]> writes:
> Thanks for the reply Lowell (or is it Gilbert).
My name can get even more confusing...
["Mr. Gilbert" is more formal than necessary.]
> Do you know of any
> additional information on "devfs" apart from the
Hi,
Lowell Gilbert wrote:
"Charles Howse" <[EMAIL PROTECTED]> writes:
Below is a portion of netstat -an.
Notice that my pop server (popa3d) is listening on all interfaces.
tcp4 0 0 *.110 *.*
LISTEN
wouldn't it be possible to change this whilst editing
within the so
Stefan Malte Schumacher <[EMAIL PROTECTED]> writes:
> > /dev/ad4s1 /mnt/I msdos rw 0 0
Yes, that should work okay. Assuming, of course, that you have the
device and directory names correct.
> Oh and another thing : What entries do I have to make so tha
Hi,
I'm a newbie to FreeBSD, and am trying to set it up to
dual boot from a Primary Slave hard drive on an HP
Pavilion 716n. Having nothing but troubles.
I've done the Google searches, and I've spent as much
time as I can afford scouring the help sites, but
can't find any answers. If this is no
Frank Reppin <[EMAIL PROTECTED]> writes:
> wouldn't it be possible to change this whilst editing
> within the source? I just downloaded popa3d
> and it shows:
>
> /*
> * The address and port to listen on.
> */
> #define DAEMON_ADDR "0.0.0.0" /* INADDR_ANY */
> #define DAEMON_PORT
Charles Howse wrote:
For the sake of testing, put the mouse directly to the FreeBSD system
and reboot (well you might not actually have to reboot but
check to see
if moused is running and if so kill it and then restart it).
That worked fine. The problem must be the KVM, as I suspected.
Know
Hey guys, i have a weird problem , that i'm trying to resolve! My network is: a cable
modem connected to the first NIC and the second NIC connected to the switch, and i
decide to reinstall freebsd on my gateway and put new ipf.rules but after i put the
new rules, i dont have access to the intern
How to get the best results from FreeBSD questions.
===
Last update $Date: 2003/03/09 22:09:31 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that at
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception. Inev
I forgot to say the options i put when i recompile the kernel:
options IPFILTER
options IPFILTER_LOG
options IPFILTER_DEFAULT_BLOCK
options RANDOM_IP_ID
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-
I have some menu server java applets I would like to run on my fbsd server
but I have no idea where to get started. Some initial inquiries on Google
have not brought any luck.
Is there any sites that deal with this, or does anyone have a suggestion?
___
> block in log all
> block out log all
You don't need these since you used IPFITLER_DEFAULT_BLOCK (per your last
message). If you want to log blocked traffic, add
block in log quick on ep1 all
at the end of your rules for that interface.
You may want to try setting all interfaces to pass in/ou
I try and change my ruleset for
pass in all
pass out all
and i reboot the machine, and i haven't internet access anyway, so, i say something
wrong, i dont have internet probably since i re-compile my kernel, so
IPFILTER_DEFAULT_BLOCK can be making all this trouble to me?! and not the rules,
r
Sorry that another post, but i release that i commented these options in my kernel
configuration:
# pseudo-device gif
# pseudo-device faith
# pseudo-device bpf
and these barkeley packet filtering related i read somewhere that interefears in DHCP
server/client, anyone can say if it can be affect
Hi,
I installed sqlrelay (0.32_2), it gives me the following error when running
sqlr-start:
anoat:/usr/ports/databases/sqlrelay# sqlr-start -id naboo-ms
Starting listener:
sqlr-listener -id naboo-ms -config /usr/local/etc/sqlrelay.conf
sqlr-listener error:
Unable to create a semaphore set
You need bpf for IP Filter to work!! You can leave gif and faith commented
out.
- Original Message -
From: "geek" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, August 15, 2003 6:21 PM
Subject: RE: Gateway problemas
Sorry that another post, but i release that i commented thes
My bad, I meant you need bpf for dhclient to work.
- Original Message -
From: "Mike Maltese" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: "geek" <[EMAIL PROTECTED]>
Sent: Friday, August 15, 2003 7:03 PM
Subject: Re: Gateway problemas
> You need bpf for IP Filter to work!! You can lea
Exceed is a Windows Xserver implementation for Microsoft Windows
platforms (maybe others). One can use it many different ways to do what
you want. I haven't used it in over a year.
I think the closest thing similar to VNC is to use xdm. Exceed can give
you a "chooser" from which you select the hos
> Here's a thought. What happens when you switch away then switch back
> kill moused then restart moused? I'm thinking that maybe a cron job
> could be created to check mouse states and kill then restart moused.
Very interesting...
#!/usr/local/bin/bash
# Kill and restart moused
ps -wax | grep
> > /*
> > * The address and port to listen on.
> > */
> > #define DAEMON_ADDR "0.0.0.0" /* INADDR_ANY */
> > #define DAEMON_PORT 110
> >
> > but I have to mention that I dunno if the port can handle this. :/
> > must check first
> > But at least it should be possible to bind
Yeah, i recompile my kernel with bpf and now pf is working, but it just works with the
rules "pass in quick all / pass ou quick all", with the rules i post here first, it
doesnt work, so, it's something wrong in my ruleset :(
___
[EMAIL PROTECTED] maili
>From what point in your network are you not able to connect? Can you ping
the outside world from you gateway itself? Do you have your NAT ruleset
written correctly?
Use this for your ruleset (copy exactly):
pass in quick on ep0 all
pass out quick on ep0 all
pass in quick on ep1 all
pass out qui
Hello.
I have downloaded a copy of FreeBSD 5.1-RELEASE and want to install it. But to be
sure, I want to keep my existing Windows install, so that if I don't like it, I can
switch back. But then, I can't find any describtion if any, on how to make the
partitions with PartitionMagic, which is a
Hello
I tried to start up my Distributed Folding client, which
consumes quite a lot of CPU, and it didn't take long before the
machine rebooted.
I guess the CPU fan is the first thing I will look at when I get
back home. This is a PIII 850 MHz Slot 1. I've never had any
problems with them before
I can't ping the outside world from my gateway, and dont have any type of acess from
my gateway!!
pass in quick on ep0 all
pass out quick on ep0 all
pass in quick on ep1 all
pass out quick on ep1 all
pass in quick on lo0 all
pass out quick on lo0 all
i put these rules, and then the rest of the
Yes these rules will permit all traffic in and out. That's the point. It's
process of elimination, and these rules intended to be temporary, and to
rule out the possiblilty of your ruleset being the problem. Use them until
you figure out what the real problem is. Now, what does your NAT ruleset
loo
65 matches
Mail list logo
