On Mon, Jun 23, 2003 at 04:40:24PM -0700, Bill Campbell wrote:
> Be that as it may, when I booted the new kernel with an external firewire
> disk turned on, the new kernel detected the firewire disk before it did the
> SCSI on the adaptec controller, and naturally couldn't find a working
> system
>
> optionPNPBIOS
> devicepcm
>
>
> rain# grep pcm /var/run/dmesg.boot
> pcm0: on sbc0
>
For my ESS audio (1936 or something), I needed the pcm and:
device sbc
not sure if it will make a difference since your card is being detected
on boot, but it might use
--On 23 June 2003 18:12 -0700 Shawn Ramsey <[EMAIL PROTECTED]> wrote:
I am having some issues with network performance and am wondering if
anyone has any suggestions... the box in question has 2 100BT interfaces,
and an Intel (em driver) fiber Gigabit. The Gigabit connects to a switch,
and the t
I am using KMixer. That seems to work a little bit.
-Original Message-
From: Kent Stewart [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 12:15 AM
To: Duke, Brian; [EMAIL PROTECTED]
Subject: Re: Sound problems.
On Monday 23 June 2003 10:52 pm, Duke, Brian wrote:
> My system is a C
Hi,
is there a smiple way how to use national fonts /for me its czech/ in X11 with fluxbox
WM?
thank you
Martin
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROT
ביום שלישי, 24 ביוני 2003, 06:06, Bill Campbell כתב:
> On Tue, Jun 24, 2003 at 12:58:20PM +1000, Martin Ryan wrote:
> >> >What's the best way to rebuild sendmail with DB4?
> >>
> >> For an excellent fix for sendmail see:
> >>http://www.postfix.org/
> >>
> >> Bill
> >
> >Bill,
> >
> >Have you ev
Hi,
On Monday, June 23, 2003, at 11:48 PM, D J Hawkey Jr wrote:
In article <[EMAIL PROTECTED]>,
[EMAIL PROTECTED] writes:
Hi List,
I need to apply some security patches to my FreeBSD(i386) 4.7-RELEASE
box and I am concerned about the possibility that I could actually
harm
my system whil
On Tue, Jun 24, 2003 at 11:53:36AM +0300, Jim Xochellis wrote:
> Hi,
>
> On Monday, June 23, 2003, at 11:48 PM, D J Hawkey Jr wrote:
>
> >In article <[EMAIL PROTECTED]>,
> > [EMAIL PROTECTED] writes:
> >>Hi List,
> >>
> >>I need to apply some security patches to my FreeBSD(i386) 4.7-RELEASE
>
Hi,
I am trying to setup my usb modem, I looked at the man page for umodem and
ucom, and didn't find anything useful. I also searched the archives and
read up on modems in the handbook and faq, I can't find any documentation
on setting up a usb modem. I tried to compile my kernel with device u
On Tue, 24 Jun 2003 06:19, Frank wrote:
> I have formatted my hard disk using the floppy that came with it. It is
> now a 32bit FAT. I ran FIPS and everything seemed to go OK except that I
> received a message at the end of FIPS that said it could not partition
> FAT12, but I have no idea where i
Hi people,
I had a wrong-behaved server application which opened a unix socket to
respond to incoming connections, so after the socket was opened, the
application core dumped each time it was launched. As a result, 'netstat
-f unix' now shows a lot of not-needed active entries. Is there any way to
Hi, all
So far, I known firewall is a choice when I want
to protect my boxes from crackers but my question is
if I closed the service I don't use (such as port 25
for STMP) so the cracker out there can't attack,
what's the reason "firewall" come to play ?
Thanks in advance,
_
Here's how I plan to recover a system from a level 0 backup to
new hardware, if ever the need arises:
1. boot off installation CD (or floppy??)
2. disklabel, make filesystems (using sysinstall)
3. restore root filesystem and mount it
4. change fstab and various configs to work with new hardw
I keep a local copy ftpable of the version(s) I use.. Install just the
bin dist using floppy and the local ftpable - then full restore from tape
- and recompile the kernal just to be on the safe side.
On Tue, 24 Jun 2003, Sue Blake wrote:
> Here's how I plan to recover a system from a level 0 b
At 09:12 PM 6/24/2003 +1000, you wrote:
Here's how I plan to recover a system from a level 0 backup to
new hardware, if ever the need arises:
1. boot off installation CD (or floppy??)
2. disklabel, make filesystems (using sysinstall)
3. restore root filesystem and mount it
4. change fstab and
I have been trying this on 4.7 and 5.1
So the device umodem and device ucom setting in KERNCONF is the only steps
I need to take to compile it, or does it automatically just work?
On Tue, 24 Jun 2003, FBSD_User wrote:
> You left out very important piece of info, what version of FBSD you
> are
On Tue, Jun 24, 2003 at 09:12:14PM +1000, Sue Blake wrote:
> Here's how I plan to recover a system from a level 0 backup to
> new hardware, if ever the need arises:
>
> 1. boot off installation CD (or floppy??)
> 2. disklabel, make filesystems (using sysinstall)
> 3. restore root filesystem an
When i installed freebsd-5.1, i stayed close to the recommended
> partition sizes in the handbook. The faq. said 100 megabytes would usually be
You might consider Greg Lehey "new" suggestion in the latest (4th) edition
of "The Complete FreeBSD" book (a must have book, in my opinion). In there,
he
Hi,
>So far, I known firewall is a choice when I want
> to protect my boxes from crackers but my question is
> if I closed the service I don't use (such as port 25
> for STMP) so the cracker out there can't attack,
> what's the reason "firewall" come to play ?
>From a general viewpoint the m
All tests performed, no relays accepted. My access file only contains a
list of domains I reject:
Why not just not have one at all? As the top line says:
## Mail relay access control list. Default is to reject mail unless the
## destination is local, or listed in /etc/mail/sendmail.cw
Well, my /
Greetings
I'm trying to install FreeBSD on a HP Cluster Server. But when I boot with the
CD's ( 4.4, 4.8 & 5.0 ), it will boot all the way upto "Wait 15 seconds for
SCSI devices to settle" and then it immedialty give the following message:
(noperiph:sym0:0:-1:-1):SCSI BUS reset delivered.
(nope
5.1 is on my computer at the moment, I will install 4.7 tonight and send
you the GENERIC dmesg.boot file tomorrow. I have not set up my ppp yet, I
don't know how to do it for usb, the way I understand it ucom lets you use
the usb modem like a tty but I have not been able to get that right. Am I
Hi,
Subject says it all really, what good is a website if only I can view it?
Ok, brief history of problem and setup details, I'm sure I'll leave
something out you need.
I had 3 computers all run MS and Apache2 Web Server was on the main one
connecting to the net via ADSL and using dyndns.org cl
I need a good ftp mirroring program. I've checked the ports and there are
couple of them. I don't have time to try them all, so any recommendation is
highly appreciated.
Thanks...
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listi
Hi, all
I need a jsp engine on freebsd. One installation on
linux from my office works great so far. What's the
status and how stable JDK are on freebsd? Which jdk
version will you recommend? Is there any ready-to-go
package available or I must build it from port?
Thanks for your help,
Vincent
Vincent Chen wrote:
Hi, all
I need a jsp engine on freebsd. One installation on
linux from my office works great so far. What's the
status and how stable JDK are on freebsd? Which jdk
version will you recommend? Is there any ready-to-go
package available or I must build it from port?
There is a ar
Hi,
I have this setup for mbone on a box with FreeBSD 4.8 where I have a Brooktree878
WinTV card and have installed the drivers properly and enabled the kernel to do
multicast routing.
However, whenever I launch VIC through SDR and try to select the proper device for my
video, it shows me "mete
On Tue, Jun 24, 2003 at 11:40:52AM +0300, Benzi Mizrahi wrote:
>áéåí ùìéùé, 24 áéåðé 2003, 06:06, Bill Campbell ëúá:
>> When I first connected our systems to the Internet over ten years ago, the
>> CERT advisories on sendmail were about the size of a Manhattan phone book.
>> Over the years, it
Hello,
I'm needing some help with a QLA2200 Fibre Channel Card on FreeBSD 4.2. I've
installed the card and the bios sees the raid 5 partition on our san. When
booting I see a warning message of:
isp0: port 0x3000-0x30ff mem
0xf420-0xf4200fff irq 5 at device 4.0 on pci2
isp0: WARNING- cannot
I found this very interesting when I saw it originally, but then found
it was probably a bug.
Basically, when I log into my 5.1-RELEASE box (compiled today from CVS),
I can do a 'w' and get the following:
% w
10:39AM up 5:01, 1 user, load averages: 0.00, 0.00, 0.00
USER TTY F
Supote Leelasupphakorn wrote:
Hi, all
So far, I known firewall is a choice when I want
to protect my boxes from crackers but my question is
if I closed the service I don't use (such as port 25
for STMP) so the cracker out there can't attack,
what's the reason "firewall" come to play ?
First of
no one knows what this means?
Dave
- Original Message -
From: "David Loszewski" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, June 23, 2003 11:28 PM
Subject: can someone translate these log messages please?
> I have a Mylex Acceleraid 160, I seem to be getting these message
Gav wrote:
Hi,
Subject says it all really, what good is a website if only I can view it?
Ok, brief history of problem and setup details, I'm sure I'll leave
something out you need.
I had 3 computers all run MS and Apache2 Web Server was on the main one
connecting to the net via ADSL and using
In addition to my previous email, I found the following:
% ps auwx |grep login
root 587 0.0 0.1 1604 1220 p0 Is5:39AM 0:00.01 login
[pam] (login)
root57250 0.0 0.1 1604 1232 p1 Is7:44AM 0:00.02 login
[pam] (login)
root 6162 0.0 0.1 1604 1236 p2 Ss 11:08A
Nevermind this last email from a different box :)
Raymond Sundland wrote:
In addition to my previous email, I found the following:
% ps auwx |grep login
root 587 0.0 0.1 1604 1220 p0 Is5:39AM 0:00.01 login
[pam] (login)
root57250 0.0 0.1 1604 1232 p1 Is7:44AM 0
tsk tsk, you got posting about it before I did.
I'm actually having the same problem. I've noticed 5.1 installed via
cvsup/compile does this, but a cd new install does not. No one at work was
able to replicate this error, but they were all using the CD.
Randi Harper
[EMAIL PROTECTED]
http://pe
Heelo,
I'm working in France for the CNRS and I just installed FreeBSD 5.1-
Release-i386. The installation was successfull but now I don't manage to
open any graphic environnement (neither KDE nor Gnome). The error
is : "error in locking authority file /home/.../.Xauthority". I consulted
the file n
On Tue, Jun 24, 2003 at 10:10:03AM -0400, Kliment Andreev wrote:
>I need a good ftp mirroring program. I've checked the ports and there are
>couple of them. I don't have time to try them all, so any recommendation is
>highly appreciated.
We primarily use rsync.
BTW: Do any of the freebsd ftp sit
Schroeder, Aaron wrote:
I had a similar problem. If I remember correctly ruby rebuild fixed it
for me.
Lukasz
Hello,
I originally sent this to ports, but I think questions is the proper group.
This is probably a trivial fix on my end, but I have never run into this
before. When I am trying to
Thanks for prompt reply, guys. I enjoy this community, but hate the install.
While I didn't mention it in my email, I did try this as well:
> > # XFree86 -configure
And it didn't work. Gave me X cursor in gray screen and could not get out.
As for checking for multiple config files, how would
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
In a 4.8-STABLE kernel (cvsup'd yesterday), I'm getting a kernel panic
early in bpf_mtap. I use bpf extensively (through the pcap library),
but am now getting panics. This occurs on code I'm working on,
not by default.
This is happening on my laptop
sounds like you are doing pretty good. If you are getting the gray screen
and black X then your video card is supported and you have started X. What
you are missing is a window manager. I don't know what window manager you
want but give fluxbox a try, it is in the ports collection. If you want
"Martin Ryan" <[EMAIL PROTECTED]> writes:
> What's the best way to rebuild sendmail with DB4? There's a makefile in
> /usr/src/usr.sbin/sendmail and there also a sendmail port and I'm not
> sure which is the recommended way to go. FWIW, I want to get
> milter-sender going
> (http://www.snert.com
"David Loszewski" <[EMAIL PROTECTED]> writes:
> I have a Mylex Acceleraid 160, I seem to be getting these messages in my logs, could
> someone tell me what they mean? Something I should be worried about?
>
> mly0: physical device 0:0 sense data received
> mly0: sense key 1 asc 03 ascq 01
>
On Tue, Jun 24, 2003 at 08:47:35AM -0700 or thereabouts, Bill Campbell seemed to write:
> On Tue, Jun 24, 2003 at 10:10:03AM -0400, Kliment Andreev wrote:
> >I need a good ftp mirroring program. I've checked the ports and there are
> >couple of them. I don't have time to try them all, so any recomm
On Tue, Jun 24, 2003 at 08:15:41AM +0100, Matthew Seaman wrote:
>On Mon, Jun 23, 2003 at 04:40:24PM -0700, Bill Campbell wrote:
>
...
>> My basic question is how does one control the order devices are scanned
>> during the boot process? I would like to be sure that the system will come
>> up after
yea, they're coming up in the kernel logs. I tested this drive on an
Adaptec 29160 and everything tested out fine on it.
Dave
- Original Message -
From: "Lowell Gilbert" <[EMAIL PROTECTED]>
To: "David Loszewski" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, June 24, 2003 1:
My locate database is not being updated.
If I run the script in /etc/periodic/weekly this is the output:
[EMAIL PROTECTED]:/etc/periodic/weekly]# ./310.locate
Rebuilding locate database:
[EMAIL PROTECTED]:/etc/periodic/weekly]#
That takes about 1 second.
This is an ls on the db file.
[EMAIL P
Hi all
Thank you for your reply
If I install those software, does my server have
security problem?
In my memory, I read a books before.
sth will make the network card to prismous mode and
there is security problem
I am not sure about it. please teach me
thank you again
--- Fernando Gleiser
Marco Trentini wrote:
>
> Vincent Chen wrote:
> > Hi, all
> >
> > I need a jsp engine on freebsd. One installation on
> > linux from my office works great so far. What's the
> > status and how stable JDK are on freebsd? Which jdk
> > version will you recommend? Is there any ready-to-go
> > packag
Dear Freebsd,
I'm the webmaster of a free email service website at
"http://www.fatmailbox.com"; . I've collected quality links to other
similar resources on the Internet on my links page. I came across your
site and feel that it'd make perfectly fit in my collection of quality
links.
I've al
"David Loszewski" <[EMAIL PROTECTED]> writes:
> yea, they're coming up in the kernel logs. I tested this drive on an
> Adaptec 29160 and everything tested out fine on it.
Okay, so what do you mean exactly about them filling up your logs?
Multiple messages per second?
> Dave
>
> - Origina
Hi all.
A number of days back I had asked a question about IPaliasing and ifconfig.
One of the answers I got was correct, but took a while for me to prove it
out.
The question was: If I have multiple IPs from a different network, should I
be using the new netmask, or the book value of 255.255.255
Hi!
The last thing which makes me stay on 4.8 is xawtv. I have overlay-mode
for the bktr-driver here. Since 5.0, I cannot choose overlay anymore.
Only grabbing is available, which is affected by the CPU load.
Any hints how to make xawtv use overlay mode on current?
Thanks,
Martin
___
On Tue, 24 Jun 2003 11:00:27 -0600, "Timms, Simon"
<[EMAIL PROTECTED]> said:
> sounds like you are doing pretty good. If you are getting the gray
> screen
> and black X then your video card is supported and you have started X.
> What
> you are missing is a window manager. I don't know what windo
On Tue, Jun 24, 2003 at 12:42:21PM -0700, Rev. Joe Doyle Ardent wrote:
> Marco Trentini wrote:
> >
> > Vincent Chen wrote:
> > > Hi, all
> > >
> > > I need a jsp engine on freebsd. One installation on
> > > linux from my office works great so far. What's the
> > > status and how stable JDK are on
Hello,
I want to install the stable version of gimp with the package system, however, after
checking the FreeBSD's main ftp site, I've only found the unstable version. Where else
can I find this package?
Thanks!
___
[EMAIL PROTECTED] mailing list
http
Hi, all
Maybe a simple question for somebody who knows the answer, "this counts for
for all questions";
Thinking about using a Hauppauge WinTV PCI TV card to capture (Hi Quality)
images to store locally and to publish (Cron?) over FTP as a WebCam function.
Is there a simple command line program
Even here?
On Tue, 24 Jun 2003 16:05:43 -0400 "Randy" <[EMAIL PROTECTED]> wrote:
> Dear Freebsd,
>
> I'm the webmaster of a free email service website at
> "http://www.fatmailbox.com"; . I've collected quality links to other
> similar resources on the Internet on my links page. I came across
On Tue, Jun 24, 2003 at 06:08:13PM -0300, Konrad Scorciapino wrote:
> Hello,
>
> I want to install the stable version of gimp with the package
> system, however, after checking the FreeBSD's main ftp site, I've only
> found the unstable version. Where else can I find this package?
The distfile co
not per second, like a few of them every 30 minutes or so
Dave
- Original Message -
From: "Lowell Gilbert" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 24, 2003 4:30 PM
Subject: Re: can someone translate these log messages please?
> "David Loszewski" <[EMAIL PROTECTE
I recently installed 5.1-RELEASE - I was previously using 5.0.
When I had 5.0, I could easily boot FBSD from GRUB using these settings
in my Linux's /boot/grub/menu.lst file:
title FreeBSD
root (hd0,1,a)
kernel /boot/loader
boot
These settings no longer work, and I get an error message t
Greetings everyone:
Does anyone know what needs to be done to the tcpd - tcp wrappers
to get banners to work? Thanks.
Cheers,
Vince - [EMAIL PROTECTED] - Vice President __
Unix Networking Operations - FreeBSD-Real Unix for Free / / / / | / |[__ ]
WurldLink
Hello to all,
Today I subscribed to an adsl service in Portugal. I choose to buy a
Alcatel SpeedTouch USB modem because of pppoa port exists. PPPoA port
doesn't work because my ISP don't support PPPoA connections, only PPPoE.
(Bad luck!).
I've searched google and I found that the solution for th
Robert Storey <[EMAIL PROTECTED]> writes:
> I recently installed 5.1-RELEASE - I was previously using 5.0.
>
> When I had 5.0, I could easily boot FBSD from GRUB using these settings
> in my Linux's /boot/grub/menu.lst file:
>
> title FreeBSD
> root (hd0,1,a)
> kernel /boot/loader
> boot
On Tue, Jun 24, 2003 at 10:05:51PM +0100, Matthew Seaman wrote:
> On Tue, Jun 24, 2003 at 12:42:21PM -0700, Rev. Joe Doyle Ardent wrote:
> > Marco Trentini wrote:
> > >
> > > Vincent Chen wrote:
> > > > Hi, all
> > > >
> > > > I need a jsp engine on freebsd. One installation on
> > > > linux from
On Thu, 24 Jul 2003 23:08:14 +0200
Zeo Smeijsters <[EMAIL PROTECTED]> wrote:
> Hi, all
>
> Maybe a simple question for somebody who knows the answer, "this counts for
> for all questions";
> Thinking about using a Hauppauge WinTV PCI TV card to capture (Hi Quality)
> images to store locally and
On 25 Jun 2003 00:12:57 +0200
Christian Laursen <[EMAIL PROTECTED]> wrote:
> Robert Storey <[EMAIL PROTECTED]> writes:
>
> > I recently installed 5.1-RELEASE - I was previously using 5.0.
> >
> > When I had 5.0, I could easily boot FBSD from GRUB using these
> > settings in my Linux's /boot/grub
What do you mean by banners? and in what environment? (You talking about
ad banners on web pages? or something else)
On Tue, 24 Jun 2003, Vincent Poy wrote:
> Greetings everyone:
>
> Does anyone know what needs to be done to the tcpd - tcp wrappers
> to get banners to work? Thanks.
>
>
I'm referring to /usr/libexec/tcpd as in the TCP Wrappers which
relies on /etc/hosts.allow. The environment is pretty much for anything
via terminal access and not via the web. tcpwrappers used to be a port on
FreeBSD and that one when you edit the files would allow the banners to
work bu
adrian kok wrote:
Hi all
Thank you for your reply
If I install those software, does my server have
security problem?
In my memory, I read a books before.
sth will make the network card to prismous mode and
there is security problem
I am not sure about it. please teach me
Promiscuous mode is a mod
To: Marketing Dept.
From: VIO System/ California, USA
We're sorry to disturb you with this message, but
nowadays, there are not many products to distribute because
all the products are already introduced by multi national
companies. But we have products that will help you gaining
market share qu
> > with unused USB and onboard NIC which is also not used. Should I be able
> > to push more than 100Mb sec with such a system? It is not doing anything
> > else, no NAT, one IPFW rule. OS is FreeBSD 4.7-RELEASE.
>
> All depends how big the packets are etc. - 90% interrupt time is fairly
> typi
Ok...I'm having a small panic. I have a server that I just got a 180GB
IDE HD forbut the controller cards I have don't support drives over
137GB, so I had to use the one Western Digital gave me. Once I added
that in, in threw off my drive assignments. Here are the setups BEFORE
the upgrade:
Hi,
First, forgive me if this doesn't come through devoid of html. I'm
normally a mutt user, but I'm trying evolution. We'll see how it goes.
I'm on a $.%-STABLE system, and I've been experiencing some disk errors;
I did an fsck -y on the slice where /usr lives. (I forgot it was /usr
when I di
other than zope - are there any good onlin content management tools out there
that allow people to update webpages and cgi code easily?
- Noah
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscrib
On Tue, Jun 24, 2003 at 10:31:32AM -0700, Bill Campbell wrote:
>On Tue, Jun 24, 2003 at 08:15:41AM +0100, Matthew Seaman wrote:
...
>>You can get round that by 'wiring down' the SCSI buses and devices in
>>your kernel config. Eg. assume that your boot drive is at LUN 0 on an
>>Adaptec SCSI interfa
In the last episode (Jun 25), Robert Storey said:
> On 25 Jun 2003 00:12:57 +0200 Christian Laursen <[EMAIL PROTECTED]> wrote:
> > Robert Storey <[EMAIL PROTECTED]> writes:
> > > When I had 5.0, I could easily boot FBSD from GRUB using these
> > > settings in my Linux's /boot/grub/menu.lst file:
>
At 07:33 AM 6/25/03, you wrote:
other than zope - are there any good onlin content management tools out there
that allow people to update webpages and cgi code easily?
I'm just in the process of installing one called Pagetool
(http://www.pagetool.org/) which looks good. Based on PHP. I also like
The Problem:
When I print from programs like OpenOffice, StartOffice or Netscape the
printing sometimes overlaps, goes past the page margins or even
sometimes beyond an object's margings (Things like tables will cause this).
If I use print to file then have ghostscript to view it everything look
I'm trying to upgrade from 4.4 Release to 4.8 Release. Everything goes
well until I reboot after building and installing my new kernel. This
machine serve as a gateway, nat, ipfw. I'm using a custom kernel. Prior
to upgrading everything worked fine.
When I reboot it hangs after:
ppi0: on ppbus
David S. Jackson wrote:
Hi,
First, forgive me if this doesn't come through devoid of html. I'm
normally a mutt user, but I'm trying evolution. We'll see how it goes.
I'm on a $.%-STABLE system, and I've been experiencing some disk errors;
I did an fsck -y on the slice where /usr lives. (I forgo
Matthew Seaman <[EMAIL PROTECTED]> wrote:
On the other hand, check out the security/freebsd-update port and it's
associated web site at http://www.daemonology.net/freebsd-update/ --
this isn't an 'official' part of FreeBSD yet (surely only a matter of
time, though). This is a very interesting syst
When I pop in my installation cd and turn the comp, it
spits out this:
CD Loader 1.01
Building the boot loader arguments
Read Error: 0x01
Could not find Primary Volume Descriptor
I'm trying to install the 5.1 release on a:
Pentium 166
32mb Ram
STB_Virge (video)
2.5gb EIDE
Mitsumi 12x IDE
=
On Wednesday 25 June 2003 1:52 am, Dan Nelson wrote:
> In the last episode (Jun 25), Robert Storey said:
> > On 25 Jun 2003 00:12:57 +0200 Christian Laursen <[EMAIL PROTECTED]>
wrote:
> > > Robert Storey <[EMAIL PROTECTED]> writes:
> > > > When I had 5.0, I could easily boot FBSD from GRUB using t
I'm running 4.8 and XF86 Version 4.2.1.
DPMS isn't working right on my new machine (ASUS A7A266 motherboard).
1. The monitor is capable of doing DPMS
2. DPMS works fine when the monitor is just displaying a text console
3. DPMS does not work from X
4. I have checked my /etc/X11/XF86Config fil
Hello!
Is there any way to make my Canon BJC-2100 work under freebsd 4.8???
If it's possible, please point me to doc's, manuals or etc.
Thanks.
--
Kostya Odnoralov
mailto:[EMAIL PROTECTED]
http://www.net.sumy.ua
___
[EMAIL PROTECTED] mailing list
http
ביום רביעי, 25 ביוני 2003, 01:27, Gary Kline כתב:
> On Tue, Jun 24, 2003 at 10:05:51PM +0100, Matthew Seaman wrote:
> > On Tue, Jun 24, 2003 at 12:42:21PM -0700, Rev. Joe Doyle Ardent wrote:
> > > Marco Trentini wrote:
> > > > Vincent Chen wrote:
> > > > > Hi, all
> > > > >
> > > > > I need a jsp e
88 matches
Mail list logo
