On Fri, 2003-02-07 at 02:58, Mark Edwards wrote:
>
> Well, I have the XFree86-libraries-4.2.1_6 port installed, and my
> XF86Config file contains:
>
> Section "Module"
> Load "freetype"
> Load "type1"
> EndSection
>
> I think that fits the bill, but obviously something is wrong...
Pro
On Friday, February 7, 2003, at 12:05 AM, Joe Marcus Clarke wrote:
On Fri, 2003-02-07 at 02:58, Mark Edwards wrote:
Well, I have the XFree86-libraries-4.2.1_6 port installed, and my
XF86Config file contains:
Section "Module"
Load "freetype"
Load "type1"
EndSection
I think that fits
Morning, all;
I'm trying to get a Mitsumi D509V3 1.2MB 5.25" floppy drive
to work on FreeBSD 4.2.6. The operating system reports the drive
is available and definitely makes contact with the drive (visual
confirmation: LED). The issue is during read/write from the
drive. Error message:
fd0c:
have you tried using:
/dev/fd0.1200
I think 1.2MB is the normal size for a 5.25 dual sided floppy.
--daxbert
- Original Message -
From: "northern snowfall" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, February 07, 2003 12:26 AM
Subject: 5.25" F
Hi again,
It seems like I don't get any mails from the list anymore.
It happend I got deleted at my ISP:s, and my ftp and mail parts disappeared.
Any mail to me should have been returned to the sender.
Can it be this? Am I in any way automaticly deleted from the list because of
this, so I have to
Hi,
In order to make the user able to use mtools, access to A: that is, I put a
line in fstab like:
/dev/fd0/floppy msdos rw wheel noauto
this made it. As user I could use the floppystation with mtools.
But starting the machine today failed.
Here is what it says:
fd0c: hard error read
> Hi,
> In order to make the user able to use mtools, access to A: that is, I put
> a
> line in fstab like:
>
> /dev/fd0 /floppy msdos rw wheel noauto
>
> this made it. As user I could use the floppystation with mtools.
> But starting the machine today failed.
> Here is what it
On Thu, Feb 06, 2003 at 07:19:36PM -0500, stan wrote:
> Looks like I might be getting to order a new laptop at work to replace the
> 4 year old HP that I have. this machine will be a FreeBSD machine.
great.
>
> What machines should I be looking at? Assume that I have about $2k to
> spend.
Try d
I promise this is last time I'm asking this question
again: what are proper 5.0-RELEASE kernel
configuration file/device.hints file settings for
internal PCI modem that is visible under sio0 with
4.6-RELEASE and with following line in kernel
configuration file:
device sio at pci
Thanks.
__
I used to have a linux firewall/nat box controlling access to our
network. I want to use FreeBSD on a new system But I`m having trouble
getting the NAT to work.
This is the line on the old firewall running linux.
$IPTABLES -t nat -A POSTROUTING -d ! 192.168.0.0/16 -j SNAT --to
How would this tr
Hey,
1) Are true bitmapped graphical consoles possible in freebsd, I mean at
least like the resolution of the Vesafb driver in Linux? (Something like 16,
24 or even 32bpp with 1280x1024 screen resolutions)
2) If not, is a "Linux Vesafb" like driver planned for freebsd future
releases?
Thanks a l
Hey,
Try settings this value:
Option "DigitalVibrance" "integer"
Enables Digital Vibrance Control. There are 4 levels:
3, 2, 1 and off (0). This feature is only supported
on GeForce2 MX (and 200/400), GeForce2 Go, Quadro2 MXR/EX,
Qu
> match edit rgba=vgbr;
Sorry a typo, I meant:
match edit rgba=vrgb;
Here is also some more eye candy for your mouse cursor, it gives you a
shadow under the mouse cursor:
Option "CursorShadow" "true"
Option "CursorShadowAlpha" "75"
Option "CursorShadowXOffset" "4"
Option "CursorShadowYOffset" "3"
On Fri, Feb 07, 2003 at 07:42:49AM -, Kjell wrote:
> Yesterday I was 'playing' with vidcontrol. Got a few error messages, did
> a pkg_add and finally achieved what I set out to.
> Ever thereafter I have been receiving an error message on the hour and
> every 11 minutes:
> From: [EMAIL P
Hi,
Try this
update user set Host='%' where Host='foobar';
update db set Host='%' where Host='foobar';
Cheers
- Original Message -
From: "Brian Henning" <[EMAIL PROTECTED]>
To: "freebsd" <[EMAIL PROTECTED]>
Sent: Monday, February 03, 2003 09:30 PM
Subject: mysql add host
> Hello,
>
On Thu, 6 Feb 2003 19:17:29 - , [EMAIL PROTECTED] ("Aslak Evang")
wrote:
>I've used samba a lot for browsing my freebsd drives with my windows pc's,
>but whats the best way to do it the other way around? I've read about
>smbclient, but I've been told in Linux there are kernel modules you can
>
fredag 07 februari 2003 09:59 skrev du:
> I am not sure, but i think "mount /dev/adXsY /" will mount the drive R/W,
> so that you
> can edit /etc/fstab (test with "mount" if it is mounted). Also you could
> use the
> Live-CD-ROM (disk 2) with the Fixit-Console, then do fsck and/or "mount
> /dev/adX
Hi
I've downloaded some packages from ftp.freebsd.org and
put them in my local directory together with INDEX
file (also downloaded from there). Besides, I have
CD-1 from CD set from which I'd installed base system.
When tried to install these downloaded packages using
'pkg_add package-name' I was
Hi
I'm not sure I'm writing on the appropriate mailing
list but I don't know what's the source of my problem.
I'm using an old computer with AT (pin-5) keyboard.
When I'm using normal AT keyboard everything works
fine. But when I connect modern PS/2 keyboard (SGI
101-key model) using PS/2->AT con
> I'm not sure I'm writing on the appropriate mailing
> list but I don't know what's the source of my problem.
>
> I'm using an old computer with AT (pin-5) keyboard.
> When I'm using normal AT keyboard everything works
> fine. But when I connect modern PS/2 keyboard (SGI
> 101-key model) using PS/
Thanks Brian for that input. Is there any one who
is aware about that port ?
Lunghabo
-Original Message-
From: Bill Moran <[EMAIL PROTECTED]>
To: Wire James <[EMAIL PROTECTED]>
Date: Thu, 06 Feb 2003 10:48:01 -0500
Subject: Re: VPN tunnels
> [Could you wrap your lines please, you'll get
On Fri, Feb 07, 2003 at 10:02:25AM +0100, David Rio wrote:
> On Thu, Feb 06, 2003 at 07:19:36PM -0500, stan wrote:
> > Looks like I might be getting to order a new laptop at work to replace the
> > 4 year old HP that I have. this machine will be a FreeBSD machine.
>
> great.
>
> >
> > What machi
I have a 47. STABLE system that I recently cvsup'd and did a make world.
Now I;ve built cups-base, and cups-lpr from the ports.
I'm able to send a test page to a printer using the web interface, but I'm
having trouble making things work from the command line, and I suspect that
I have somehow got
stan said:
> I have a 47. STABLE system that I recently cvsup'd and did a make
> world. Now I;ve built cups-base, and cups-lpr from the ports.
>
> I'm able to send a test page to a printer using the web
> interface, but I'm having trouble making things work from the
> command line, and I suspect t
On Thu, 6 Feb 2003 20:17:18 +0100
"Aslak Evang" <[EMAIL PROTECTED]> wrote:
> I've used samba a lot for browsing my freebsd drives with my windows pc's,
> but whats the best way to do it the other way around? I've read about
> smbclient, but I've been told in Linux there are kernel modules you can
Thomas Widlundh wrote:
Hi again,
It seems like I don't get any mails from the list anymore.
It happend I got deleted at my ISP:s, and my ftp and mail parts disappeared.
Any mail to me should have been returned to the sender.
Can it be this? Am I in any way automaticly deleted from the list because
I was loading both the sbc and the pcm modules. I thought that wasn't
suppose to be any more different than if they were compiled into the the
kernel using the config file.
But then again, I'm not an expert with the kernel either...
From: Rod Person <[EMAIL PROTECTED]>
To: "Lord Sith" <[EMAIL P
OpenOffice is failing to build from ports. I have attached the last
~300 lines of output from a build.
d80h149:/usr/ports/editors/openoffice#uname -a
FreeBSD d80h149.xx.xx.edu 4.7-STABLE FreeBSD 4.7-STABLE #3: Mon Feb 3
03:41:33 EST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/DELLGX400
i386
d
I am a FreeBSD Newbie trying to install 5.0, but I will Install any
Version that will work, on a Compaq Proliant, Dual 550 MHz with 512 MB
RAM, Smart Array 221 RAID Controller with a RAID 5 Array (4 * 18.2GB)
drives. The installation hangs after discovering the SCSI Tape Drive.
With the foll
I thought that was the newer ones. Weren't the old style 5.25s 640K?
It's been so long . . .
Model independant
Where the heck did you even find a working one?
Around the house. We have three...
Even the 3.5s are
pretty much beyond usefulness for me now that the net is everywhere
and the
On 7 Feb 2003 at 10:02, David Rio wrote:
> On Thu, Feb 06, 2003 at 07:19:36PM -0500, stan wrote:
>
> > What machines should I be looking at? Assume that I have about $2k to
> > spend.
>
> Try dell. Inspiron 8200 seems great. Of course you must be careful with the
> hardware, but for me there is
You can also use sharity-light
/usr/ports/net/sharity-light
It's easy to use and you don't need Samba installed.
- Original Message -
From: "Stephen Hilton" <[EMAIL PROTECTED]>
To: "Aslak Evang" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, February 07, 2003 8:41 AM
Subject: R
> > Try dell. Inspiron 8200 seems great. Of course you must be careful with the
> > hardware, but for me there is another important feature that I take care
> > every time I buy a laptop: keyboard. Today, there is a annoying tendency to
> > put unuseful keyboards on laptops.
> > Inspirons 8200 are
At 2003-02-07T14:02:17Z, stan <[EMAIL PROTECTED]> writes:
> What's the best way to make certain I have removed all traces of lp* from
> the base system?
Setting NO_LPR in /etc/make.conf disables the building of the contents of
`/usr/src/usr.sbin/lpr'. I removed all of the programs that are built
I have a monochrome monitor I'd like to plug
in to a pentium-based FBSD router. This worked
fine on the old 386 computer it came from, but
now that the 386 is dead, I'd still like to
use it over a color monitor. Pulling the VGA
card and replacing it with the mono card and
monitor does not work.
> I have a monochrome monitor I'd like to plug
> in to a pentium-based FBSD router. This worked
> fine on the old 386 computer it came from, but
> now that the 386 is dead, I'd still like to
> use it over a color monitor. Pulling the VGA
> card and replacing it with the mono card and
> monitor do
Daxbert wrote:
I have a monochrome monitor I'd like to plug
in to a pentium-based FBSD router.
Does your system's bios support older video? Video selection is normally found on the "first" bios setup page.
Thanks. I put back the VGA monitor card and
checked. On the BIOS set-up page it shows
> Daxbert wrote:
> >>I have a monochrome monitor I'd like to plug
> >>in to a pentium-based FBSD router.
> >
> > Does your system's bios support older video? Video selection is normally found on
>the "first" bios setup page.
>
> Thanks. I put back the VGA monitor card and
> checked. On the BIOS
That is exactly what I was referring to. And as I understand it now, the
latest handbook contains all the information I need to support 4.7-RELEASE.
Thanks!
-Original Message-
From: Giorgos Keramidas [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 06, 2003 6:02 PM
To: William Wallace
I have installed sendmail and smtpd on my computer.
When I try to send a message from pine the folloewing error
comes up:
SMTP greeting failure: 554 5.0.0 /etc/mail/sendmail.cf: line
239: readcf: I op
This is the 239. line in sendmail.cf:
O ResolverOptions=WorkAroundBroken
Do you have a guess w
Dax Eckenberg wrote:
Daxbert wrote:
I have a monochrome monitor I'd like to plug
in to a pentium-based FBSD router.
Does your system's bios support older video? Video selection is normally found on the "first" bios setup page.
Thanks. I put back the VGA monitor card and
checked. On the B
> I am a FreeBSD Newbie trying to install 5.0, but I will Install any
> Version that will work, on a Compaq Proliant, Dual 550 MHz with 512 MB
> RAM, Smart Array 221 RAID Controller with a RAID 5 Array (4 * 18.2GB)
> drives. The installation hangs after discovering the SCSI Tape Drive.
> Wi
> Dax Eckenberg wrote:
> >>Daxbert wrote:
> >>
> I have a monochrome monitor I'd like to plug
> in to a pentium-based FBSD router.
> >>>
> >>>Does your system's bios support older video? Video selection is normally found
>on the "first" bios setup page.
> >>
> >>Thanks. I put back the VG
At 2003-02-07T18:04:57Z, Gannater János <[EMAIL PROTECTED]> writes:
> I have installed sendmail and smtpd on my computer.
Back up a step. You have a FreeBSD system, right? Are you installing a
version of Sendmail other than the one that comes with FreeBSD? If so, how
are you installing it?
--
hiya,
being a perl novice, I am wondering if someone has managed to use
one nifty script written by Matt Simmerson for mysql replication.
The script is here:
http://matt.simerson.net/computing/sql/mysql_replicate_manager.pl
Problem is simple for me - it just refuses to take my commands
wash@n
"B.Bonev" <[EMAIL PROTECTED]> writes:
> How can I count time for subnets on FreeBSD machine when they are connected
> to Internet via ISDN? Is there any program or script for that?
>
> Internet
> |
> FreeBSD 192.168.0.1
> | \
> Hub Hub Wireless Subnets 192.168.3
Odhiambo Washington <[EMAIL PROTECTED]> writes:
> being a perl novice, I am wondering if someone has managed to use
> one nifty script written by Matt Simmerson for mysql replication.
Look at the head of the script (FAQ "What do I add to my ~/.my.cnf
file?"). The -p switch has another function, i
Dax Eckenberg wrote:
Dax Eckenberg wrote:
Daxbert wrote:
I have a monochrome monitor I'd like to plug
in to a pentium-based FBSD router.
Does your system's bios support older video? Video selection is normally found on the "first" bios setup page.
Thanks. I put back the VGA monitor card
I am trying to upgrade a 4.5 box to RELENG_4, but it doesn't appear that
I am getting all of the required info. Here's my command, and supfile:
# cvsup -L 2 -g /etc/supfile
*default tag=RELENG_4
*default host=cvsup2.freebsd.org
*default release=cvs
*default base=/usr/local/etc/cvsup
*default pr
>
> > What's the best way to make certain I have removed all
> traces of lp*
> > from the base system?
>
> I know that the $PATH hack would probably work well, but I'm
> not sure if I want to set a blanket policy that
> /usr/local/{s,}bin come before their system counterparts.
You could jus
On 7 Feb 2003 at 11:06, northern snowfall wrote:
> Yeh, according to FreeBSD's /sys/isa/fd.c and /sys/sys/fdcio.h 360k 1.2M
> 720k are the only ones supported. This, in particular, is a Mitsumi D509V3 which
> is a 1.2M.
The fact that it's a Mitscrewme worries me. I've seen a lot of trouble
wi
Hey! Sorry about the wait, I just got got my webcam online.
Don't forget to let me know what you think!
Here's the link
See ya!
If you would like to be removed from this email list click here.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of t
i have a Sony VAIO GRX570 running FreeBSD 5.0-RELEASE and my mouse doesnt work
I'm in a complete daze as to why it's not working. The only information i can provide is i DO have "device psm" in my kernel, and default device.hints. Any help would be greatly appreciated!
-RemiSTOP MORE SPAM with the
Title: Ó âàñ íåò çàêàçîâ
Ó âàñ íåò çàêàçîâ? Ïåðåñòàëè
çâîíèòü êëèåíòû? Î Âàøèõ óñëóãàõ íèêòî
íå çíàåò? Íå õâàòàåò äåíåã íà
ïðîâåäåíèå øèðîêîìàñøòàáíîé ðåêëàìû?
Âñå ýòè ïðîáëåìû ìû ñìîæåì ðåøèòü
âñåãî çà 300$. Çà ýòè äåíüãè ó Âàñ
ïîÿâèòüñÿ âîçìîæíîñò
no one has any ideas??
Dave
On Thu, 2003-02-06 at 22:56, David Loszewski wrote:
> I loaded on FreeBSD 5.0 onto my laptop and now when I close the lid on
> the laptop my laptop goes into what I think is a suspend mode where my
> network card stops recieving or sending packets and it's like my lapt
Hi all
Just wondering what the score is with freebsd supporting 802.11g
standard? Im interested in purchasing the buffalo WLI-CB-G54
54Mbps Wireless CardBus card and using it under freebsd. Would it be
compatible? The web site itself states backward compatibility to
802.11b.
appreciate any commen
Hi all,
I was trying to know how "printf" works in FreeBSD... I hvae reached to this
point :
#define _write(fd, s, n) \
__syscall(SYS_write, (int)(fd), (const void *)(s), (size_t)(n))
I'am not really familiar with the way FreeBSD handle interrupts. I like from
any one of you to tell me what
Hi,
I am running freebsd 4.7 as my gateway to the internet.
The box has two network cards and is doing nat and dhcp/d.
Everything seems to be fine except every now and then(on average
at least once per day) I got this message:
arp: unknown hardware address format (0x0800)
what might be the cause
Hi
I am a newbie running FreeBSD 4.7 STABLE and partially installed KDE 3.1
with the Nvidia driver. I have an Asus P4B533-E Mobo, Pentium4 2.4GHz Proc,
Crucial 512MB PC2700, Leadtek GeForce3 Ti-200.
Everytime i try to upgrade Kdebase3.0.3 to Kdebase3.1 it continuously
loops on:
/usr/include
Hi!
Thank you very much for this hint with ACPI!
In fact, "set hint.acpi.0.disabled=1" did not work,
but I figured out to try acpi_load=disable and kernel
did not panic! So, seems either problem with an ACPI
driver in FreeBSD 5.0 or broken BIOS.
--- Lord Sith <[EMAIL PROTECTED]> wrote:
> Have
Title: ¦L¶r¾÷
·s¦~§ª«°e±z¤@¥x¦L¶r¾÷
...
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hi,
I am suppoed to have 1 RPM SCSIs on this box, but when I do a disklable,
it ells me 3600 RPM. Should I be worried?
-
# disklabel -r /dev/da0s1
type: SCSI
disk: da0s1
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinde
Dan Nelson wrote:
In the last episode (Feb 07), Grant Peel said:
I am suppoed to have 1 RPM SCSIs on this box, but when I do a
disklable, it ells me 3600 RPM. Should I be worried?
The values in the disklabel are not used anymore. They were, way back
when disk latency was horrible and the
Title: AFS NEWSLETTER
GIGANTIC HUGE WANKERS STUFFED IN TINY HOT HONEY HOLES
Have you ever seen a teenager use a strap on on another teenage girl?
HOT LESBIANS LICKING EACHOTH
On Fri, Feb 07, 2003 at 01:10:09PM -0500, Walter wrote:
>
> I'm guessing either the BIOS does not handle mono, or
> maybe just this mono card.
Long, long, ago, motherboards had a jumper on them, with one
position for monochrome, and another position for everything
else. Either I missed it, or yo
It would be nice if this information could be removed from the disklabel.
I guess if that's not feasible, a notation in the documentation would be
nice (I was confused about this about a year ago).
If it were up to me, I'd rather keep it in. I get sick of thunking my
documentation
database just
How to get the best results from FreeBSD questions.
===
Last update 28 January 2002, $Id: Howto-ask-questions,v 1.3 2003/01/28 00:26:41 grog
Exp $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a messag
Errata and addenda for the Complete FreeBSD, second edition
Last revision: 21 June 1999
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
co
Errata and addenda for the Complete FreeBSD, third edition
Last revision: 2 August 1999
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
com
I have no manual for this (used) Acer Pentium 120.
The Acer web site does not appear to have schematics
or other MB information (that I could find). And
looking at the MB I see nothing that leads me (a
non-tech) to think there's a VGA/MGA selector.
Anything particular writing or abbreviations I
mi
At 02:42 AM 2/8/2003 +0100, you wrote:
On Fri, 07 Feb 2003 19:05:54 -0500
[EMAIL PROTECTED] wrote:
> How can I browse Windows from Unix?
> I'm using FreeBSD 4.7, Samba, and KDE3. I'd like to be able to browse
> also from command line.
> I have not found instructions on use of smbclient-win32 and
Greetings again. I have a DSL connection with 32 addresses. My
ifconfig line in rc.conf looks like:
ifconfig_tx0="inet a.b.c.130 netmask 255.255.255.224"
defaultrouter="a.b.c.158"
This works fine. I am trying to configure dhcpd (from the ports
collection). My config file says:
default-lease-ti
According to the wi driver page, the D-Link DWL-650 802.11b card should be
supported. Using the GENERIC kernel, when I insert the card I get:
cardbus1: Expecting link target, got 0x0
cardbus1: Resource not specified in CIS: id=10, size=100
cardbus1: Resource not specified in CIS: id=14, size=400
Steve Bertrand <[EMAIL PROTECTED]> writes:
> I am trying to upgrade a 4.5 box to RELENG_4, but it doesn't appear
> that I am getting all of the required info. Here's my command, and
> supfile:
>
> # cvsup -L 2 -g /etc/supfile
>
> *default tag=RELENG_4
> *default host=cvsup2.freebsd.org
> *defaul
* David Rio <[EMAIL PROTECTED]> [2003-07-02 10:02]:
> On Thu, Feb 06, 2003 at 07:19:36PM -0500, stan wrote:
> > What machines should I be looking at? Assume that I have about $2k to
> > spend.
I've got a Gateway 450L, and it's working just fine for me. Pretty much
everything important seems to b
what are the bbest three languages to learn?
thx for your answer
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
On Fri, Feb 07, 2003 at 08:20:17AM -0600, Doug Poland wrote:
> stan said:
> > I have a 47. STABLE system that I recently cvsup'd and did a make
> > world. Now I;ve built cups-base, and cups-lpr from the ports.
> >
> > I'm able to send a test page to a printer using the web
> > interface, but I'm h
On Fri, 7 Feb 2003 [EMAIL PROTECTED] wrote:
> what are the bbest three languages to learn?
> thx for your answer
English
Mandarin
Hindi
KeS
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Voodoo Machine
Click Here
Experience feelings of inebriation, psychedelic visuals, extreme relaxation, floating sensations, intense endorphin releases, all culminating in a relaxed yet alert euphoric state. It's a completely electronic drug-like experience and it's entirely safe, legal, and be
Title: Ó âàñ íåò çàêàçîâ
Ó âàñ íåò çàêàçîâ? Ïåðåñòàëè
çâîíèòü êëèåíòû? Î Âàøèõ óñëóãàõ íèêòî
íå çíàåò? Íå õâàòàåò äåíåã íà
ïðîâåäåíèå øèðîêîìàñøòàáíîé ðåêëàìû?
Âñå ýòè ïðîáëåìû ìû ñìîæåì ðåøèòü
âñåãî çà 300$. Çà ýòè äåíüãè ó Âàñ
ïîÿâèòüñÿ âîçìîæíîñò
Fairly straight forward question I suppose. I'm creating several file-backed
vnode devices on a single physical disklabel to support some jails. If I
start the file at 1gb is it possible to increase the file without losing the
data within it? Would growfs be safe to use? Could I be so bold as
Hello all.
Is there a full explanation somewhere of what EXACTLY those six memory
usage figures mean that are displayed in 'top'? You know the ones:
Active, Inact, Wired, Cache, Buf, Free. The man page for top doesn't
explain them at all. What exactly is the difference between "active"
and "wi
On Fri, 2003-02-07 at 21:27, Dan Delaney wrote:
> Hello all.
>
> Is there a full explanation somewhere of what EXACTLY those six memory
> usage figures mean that are displayed in 'top'? You know the ones:
> Active, Inact, Wired, Cache, Buf, Free. The man page for top doesn't
> explain them at a
REFINANCE NOW at super low interest rates
MortgageTimes Broker
and Lender Network offers the lowest rates and best service in the
industry.Whether you are looking for a new mortgage, refinance, home
equity loan or debt consolidation loan, let MortgageTimes Broker or a Lender
show you how t
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 7 Feb 2003, northern snowfall wrote:
> Morning, all;
> I'm trying to get a Mitsumi D509V3 1.2MB 5.25" floppy drive
> to work on FreeBSD 4.2.6.
Cool. My father still has a 5.25" drive in production use - he has
large numbers of 5.25 di
I thought that was the newer ones. Weren't the old style 5.25s 640K?
It's been so long . . .
Where the heck did you even find a working one? Even the 3.5s are
pretty much beyond usefulness for me now that the net is everywhere
and the CDRWs are so easy and cheap, but those 5.25s would be pretty
Hi, greetings all:
Is there any way (API or Macros) provided by FreeBSD that can monitor
power consumption? I would like to check how much energy consumed by some
operation (for example, sending a package).
Any suggestions on this are appreciated.
Cheers,
Ken
To Unsubscribe: send mail to
>
> Hi, greetings all:
>
> Is there any way (API or Macros) provided by FreeBSD that can monitor
> power consumption? I would like to check how much energy consumed by some
> operation (for example, sending a package).
>
> Any suggestions on this are appreciated.
>
> Cheers,
> Ken
½Åû¹×
¹®ÀÇÇϱâ
Copyright (C) ¸ÖƼ¹Ìµð¾î¼¾Å¸, All rights
reserved..¼¿ï½Ã ¼´ë¹®±¸ ºÏ°¡ÁÂ1µ¿ 387-27
15/8korealicenseTEL : 02) 302 - 4859 ´ã´çÀÚ:À̵¿Èñ e-mail:[EMAIL PROTECTED]»ç¾÷ÀÚ¹øÈ£:110 - 07 - 21427
¸ÞÀϼö½ÅÀ» ¿øÇÏÁö ¾ÊÀ¸½Ã¸é
¼ö½Å°ÅºÎ(reject)¸¦ ´©¸£¼¼¿ä
To Unsubscribe
AMERICAN
LANGUAGE CENTER
ÖÅÍÒÐ ÐÀÇÃÎÂÎÐÍÎÃÎ ÀÍÃËÈÉÑÊÎÃÎ
ÒÅL. 238-33-86 / 778-9894
Ìîñêâà Ðîññèÿ
ÓÍÈÊÀËÜÍÀß ÑÈÑÒÅÌÀ ÀÑÑÎÖÀÒÈÂÍÎ ÎÁÐÀÇÍÎÃÎ ÌÛØËÅÍÈß
ÂÑÅ ÑÒÀÄÈÈ ÎÁÓ×ÅÍÈß ÎÒ ÍÓËß ÄÎ ÂÛÑØÅÃÎ
Ñ ÏÐÅÏÎÄÀÂÀÒÅË
hello,
i want to ask if i can change the driver behaviour, so when I play for
example mp3 file ( which usually is 2 channel - right and left), i can
listen it trough all 4 channels(2 front and 2 back) .
i have
pcm0: at io 0xda00 irq 9 (4p/2r/0v channels duplex
default) with FreeBSD fbi.gov 5.0-R
On Thursday 06 February 2003 09:11 pm, Kevin Stevens wrote:
> On Thursday, Feb 6, 2003, at 19:05 US/Pacific, David Syphers wrote:
> >>> sendmail_enable="NO"
> >>
> >> make this NONE
> >
> > Unfortunately, this is only valid in 4-stable. It was deprecated in
> > HEAD
> > September 3, 2002. I was hop
On Fri, Feb 07, 2003 at 10:16:51AM -0500, Louis LeBlanc wrote:
> On 02/07/03 12:41 AM, Daxbert sat at the `puter and typed:
> > have you tried using:
> >
> > /dev/fd0.1200
> >
> > I think 1.2MB is the normal size for a 5.25 dual sided floppy.
> >
> > --daxbert
> >
> I thought that was the n
Here's the rundown:
SSDD 8-sector: 160K This is all that was available in MS-DOS 1.0, IIRC.
SSDD 9-sector: 180K
DSDD 8-sector: 320K
DSDD 9-sector: 360K This was the default starting with MS-DOS 2.1, IIRC.
DSHD 15-sector: 1.2G (At least I think it was 15-sector...)
Only the last two appear to b
Title: ¦L¶r¾÷
·s¦~§ª«°e±z¤@¥x¦L¶r¾÷
...
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
In the last episode (Feb 07), Grant Peel said:
> I am suppoed to have 1 RPM SCSIs on this box, but when I do a
> disklable, it ells me 3600 RPM. Should I be worried?
The values in the disklabel are not used anymore. They were, way back
when disk latency was horrible and the OS needed to know
How can I browse Windows from Unix?
I'm using FreeBSD 4.7, Samba, and KDE3. I'd like to be able to browse also
from command line.
I have not found instructions on use of smbclient-win32 and do not want to
use sharity. smbclien-win32 comes with and exe file and cygwin dll's - but
what are you sup
Hi all,
Trying to get a FreeBSD box up and running, but I keep hanging randomly
when building or installing world or kernel.
I've tried at least 8 times so far, initially using an NFS /usr/src
containing releng_4. Thinking that I was having problems with my
network card or something I've now b
Trying turning polling on in the kernel on the ethernet NIC
you are using. SOunds like an interrupt issue. Set to 1000 to 3000
depending on how responsive you need it to be
joseph
On Wed, 2003-02-05 at 13:22, Muhannad Asfour wrote:
> On Wed, 2003-02-05 at 08:20, Robert Covell wrote:
> > > -
In <[EMAIL PROTECTED]>, [EMAIL PROTECTED] typed:
> what are the bbest three languages to learn?
English, Chinese, and Latin.
Of course, that does depend on what you're going to use them for.
http://www.mired.org/consulting.html
Independent WWW/Perforce/FreeBSD/Unix consulta
1 - 100 of 119 matches
Mail list logo
