Re: smartmontools

On Thu, Nov 3, 2011 at 6:39 PM, ajtiM wrote: > Hi! > > Today I installed "smartmontools" on FreeBSD 8.2-RELEASE-p3. In the > smartd.conf I changed just DEVICESCAN -a and I have in /var/log/messages: > > acd0: FAILURE - ATA_IDENTIFY status=51 error=4 > > Do I n

smartmontools

Hi! Today I installed "smartmontools" on FreeBSD 8.2-RELEASE-p3. In the smartd.conf I changed just DEVICESCAN -a and I have in /var/log/messages: acd0: FAILURE - ATA_IDENTIFY status=51 error=4 Do I need to setup something else in the smartd.conf or is something wrong with my

Using both ar0 and underlying ad12/ad14 'at the same time' (smartmontools)

Hi, I have a couple of FreeBSD 8.2-STABLE (as of 25/08) boxes. These have onboard RAID 'type' controllers. The OS is installed on 'ar0' (e.g. /dev/ar0s1d et'al). Additionally I've installed the smartmontools port - which monitors drive SMART attributes. Am

Smartmontools + Highpoint hptrr?

I'm trying to monitor SATA drives connected to a HighPoint RocketRAID 2340 card (hptrr driver) using smartmontools, but it doesn't seem to work. Has anyone managed to get this to work? I'm using RELENG_8 / amd64 if that makes any difference. I've tried both the smar

Re: Smartmontools: Load_Cycle_Count increasing rapidly

There's a way to stop the Load_Cycle_Count growing by installing ataidle from the portscollection and disabling APM with ataidle -P 0 0 0. The Load_Cycle_Count is constant after that. This reduces battery-runtime but that's much better than destroying your harddisk. Best greetings Thomas _

Smartmontools: Load_Cycle_Count increasing rapidly

Hi, there are some reports that Ubuntu GNU/Linux 7.10 "kills harddisks": http://ubuntudemon.wordpress.com/2007/10/28/laptop-hardrive-killer-bug-how-to-discover-whether-you-are-affected/ I can confirm this behaviour for FreeBSD 6.2 STABLE 200710 i386 and smartmontools-5.37_

RE: smartmontools on Compaq smart array fails

> -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Nick Jagger > Sent: Thursday, May 17, 2007 3:19 PM > To: Ted Mittelstaedt; freebsd-questions@freebsd.org > Subject: Re: smartmontools on Compaq smart array fails > >

Re: smartmontools on Compaq smart array fails

- Original Message smartmontools isn't the appropriate program you need to use a program called idacontrol get it from ftp.jurai.net/users/winter/idacontrol.tar More on PR i386/70482 Use smartmontools on ATA disks. Your 360 uses SCSI disks on a proprietary controller which doe

RE: smartmontools on Compaq smart array fails

smartmontools isn't the appropriate program you need to use a program called idacontrol get it from ftp.jurai.net/users/winter/idacontrol.tar More on PR i386/70482 Use smartmontools on ATA disks. Your 360 uses SCSI disks on a proprietary controller which doesen't support the interf

smartmontools on Compaq smart array fails

I installed smartmontools from ports on FreeBSD 6.0 on a Compaq Proliant DL360 with smart array 5i controller. I compiled it with ciss support. When running ‘smartctl -i -d cciss,0 /dev/ida0’ I am getting: smartctl version 5.37 [i386-portbld-freebsd6.0] Copyright (C) 2002-6 Bruce Allen Home

Smartctl - Smartmontools

Anyone know why this wouldn't work: smartctl -a /dev/ad0 I get: Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) It works fine on my 3ware raid drives: smartctl -a -d 3ware,0 /dev/twed0 Thanks! ___ freebsd-questions@freebsd.org maili

Re: smartmontools question

Andrea Venturoli wrote: dima wrote: and moreover, it must be supported by ATAng which presented only in 5.x branch Would it work with SCSI on 4.11? bye & Thanks av. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/lis

Re: smartmontools question

Andrea Venturoli wrote on Tuesday 19 April 2005 14:39 in the group list.freebsd.questions: > dima wrote: > >> and moreover, it must be supported by ATAng which presented only in 5.x >> branch > > Would it work with SCSI on 4.11? > I heard there are troubles with several scsi disk-drives, even

Re: smartmontools question

dima wrote: and moreover, it must be supported by ATAng which presented only in 5.x branch Would it work with SCSI on 4.11? bye & Thanks av. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-question

Re: smartmontools question

On Tue, Apr 19, 2005 at 11:26:24AM +0200, Kees Plonsz wrote: > FreeBSD Daemon wrote on Tuesday 19 April 2005 10:34 in the group > list.freebsd.questions: > > > dear list, > > > > i just installed smartmonutils from ports on a 4.11-release box. > > > > when i run > > > > # /usr/local/sbin/sma

Re: smartmontools question

FreeBSD Daemon wrote on Tuesday 19 April 2005 10:34 in the group list.freebsd.questions: > dear list, > > i just installed smartmonutils from ports on a 4.11-release box. > > when i run > > # /usr/local/sbin/smartctl -a ad0 > > I get the error message > > smartctl version 5.30 Copyright (C)

smartmontools question

dear list, i just installed smartmonutils from ports on a 4.11-release box. when i run # /usr/local/sbin/smartctl -a ad0 I get the error message smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen [snip] Smartctl open device: ad0 failed: Inappropriate ioctl for device the same with the second di

smartmontools + RAID + FreeBSD

Hi , I wonder, Does anybody use smartmontools to watch their SCSI disks for health. And Does anybody use it with RAID ?! Because I can't get any informaiton via RAID controller ?! Thanks Vahric ___ [EMAIL PROT