At 12:34 PM 7/19/2007, Harry Newton wrote:
Steve
Check your cables: I had similar sporadic failures which were caused
by a SATA cable that didn't seat well into the sockets on the board
and drive. When I replaced the cable with a better one with a spring
clip the failures stopped.
- Harry
My
Steve
Check your cables: I had similar sporadic failures which were caused
by a SATA cable that didn't seat well into the sockets on the board
and drive. When I replaced the cable with a better one with a spring
clip the failures stopped.
- Harry
"Steve Franks" <[EMAIL PROTECTED]> writes:
> W
Wasn't in front of it right at that moment, thought someone might have
a silver-bullet right off the get-go. So, here it is:
Steve
[EMAIL PROTECTED] ~]$ dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents
At 11:58 AM 7/19/2007, Steve Franks wrote:
I'm getting this error alot, on shutdown. smartmon reports all my
drives are healthy with 0 errors, I've replaced the controller and
upgraded to a 500W powersupply. At random one of my 4 sata drives
will give a "disconnected" error in dmesg and dissappe
I'm getting this error alot, on shutdown. smartmon reports all my
drives are healthy with 0 errors, I've replaced the controller and
upgraded to a 500W powersupply. At random one of my 4 sata drives
will give a "disconnected" error in dmesg and dissappear, usually when
you acess it for the first
