anubis wrote:
On Sun, 9 May 2004 3:17 am, w sx wrote:
[ ... ]
Have a look at man ata. Here is the important part
ATAPI devices are set to PIO mode by default because severe DMA
problems are common even if the device capabilities indicate support.
You can always try to set DMA mode on an ATAPI d
On Sun, 9 May 2004 3:17 am, w sx wrote:
> Thank you! I used atacontrol to set it until I
> rebooted... and after a reboot.. its detected
> correctly.
>
> --- Chuck Swiger <[EMAIL PROTECTED]> wrote:
> > w sx wrote:
> > > Does anyone have any tips on getting the CDRW
> >
> > drive
> >
> > > set to UD
On Sat, 8 May 2004, w sx wrote:
> Thanks you - Worked great!
Glad I could be of help.
Happy hacking!
/Andreas
=== Emacs =
mail: [EMAIL PROTECTED]
"Americans have different ways of saying things.
They say 'elevator', we say 'lift' ...
Thank you! I used atacontrol to set it until I
rebooted... and after a reboot.. its detected
correctly.
--- Chuck Swiger <[EMAIL PROTECTED]> wrote:
> w sx wrote:
> > Does anyone have any tips on getting the CDRW
> drive
> > set to UDMA mode?
>
> Add the following to your /boot/loader.conf:
>
> h
Thanks you - Worked great!
--- Andreas Davour <[EMAIL PROTECTED]> wrote:
> On Sat, 8 May 2004, w sx wrote:
>
> > Hi,
> >
> > I have a CDRW drive which is detected by the BIOS
> as
> > UDMA2, but when FreeBSD boots it gets set to PIO4.
> >
> > Im using FreeBSD 4.7. Its attached using a ATA133
> >
w sx wrote:
Does anyone have any tips on getting the CDRW drive
set to UDMA mode?
Add the following to your /boot/loader.conf:
hw.ata.atapi_dma="1"
...and reboot. You might also be able to use "atacontrol".
--
-Chuck
___
[EMAIL PROTECTED] mailing list
ht
Hi,
I have a CDRW drive which is detected by the BIOS as
UDMA2, but when FreeBSD boots it gets set to PIO4.
Im using FreeBSD 4.7. Its attached using a ATA133
compat cable, and its the only device on that
controller.
Does anyone have any tips on getting the CDRW drive
set to UDMA mode?
Please em
