/freebsd-current/attachments/20091101/4084
8244/ifmcstat.obj
Regards,
// Mem
- On 1st of January 2011 Manolis Kiagias wrote: -
Subject: Re: make buildworld errors
From: Manolis Kiagias
Date: Sat, 01 Jan 2011 00:35:37 -0800
On 01/01/2011 9:54 ?.?., Mike wrote:
>
> Trying to buil
On 01/01/2011 9:54 ?.?., Mike wrote:
>
> Trying to buildworld but it keeps failing. I finally deleted /usr/src
> and recopyed from a cd then cvsup using standard-supfile. Tried
> limiting how much ram freebsd uses and only using one stick of ram.
> All attempts have failed at the same place. Would
"Jacob Jennings" <[EMAIL PROTECTED]> writes:
> Hello, I am attempting to update my FreeBSD 6.0 installation's source
> tree directly after the install. I have cvsup'ed "src-all" and run
> "make buildworld" in /usr/src. However, this command fails in a
> different spot each time with a segmentation
memtest is a good start, but isn't definate. I would recommend running
memtest86, which you can get at http://www.memtest86.com/, overnight
or longer and see if it comes up with anything. I had some wierd
problems with compilling and this let me know that one of my sticks
was bad. replaced them an
Charles Swiger wrote:
Actually, if the compile crashes out at different points, that's
almost a sure sign of a hardware issue, most probably overheating. If
you were just running the system as a network router before, that
involves so little load that you wouldn't stress anything, but
building
On Mar 17, 2005, at 4:43 PM, luke wrote:
this is the 3rd place it's stopped, and like i said, if i repeat the
make buildworld command it will go a little further and stop again.
i'm going to start using time make buildworld and see if there is a
pattern here. this machine has been acting as a slack
On Thursday 17 March 2005 01:43 pm, luke wrote:
> i just cvsup'd to release_5_3 and i'm making buildworld but it keeps
> erroring out.
> if i do make buildworld again, chaning nothing, it goes a little
> further and errors
> again. i've done this a few times. here's my /etc/make.conf
These are u
