On 8/27/2010 9:14 PM, Michael J. Kearney wrote:
Will natd forward rtmp:// ???
I am sure libalias and natd know nothing about rtmp.
freebsd# cat /etc/natd.conf
use_sockets
redirect_port tcp 192.168.0.3:3389 10.1.10.172:3389
redirect_port tcp 192.168.0.2:1935 10.1.10.172:1935
redirect_port tc
Multihome your FBSD box. Assign your outside nic the external ip,
inside nic your local subnet dg. Configure natd.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-natd.html
Does FreeBSD still ship with ipnat? Or is natd the only nat'ing service?
Chris
Markus Kovero wrote:
Hi dear Asher,
First: Thank you TOO much for your detailed replay, its really a help!
in your configurations you depend that ISP will give the BSD an IP.
But in fact, Iam using a DSL MODEM ROUTER, which will call the internet
automatically, and will assign (the router) the IP 192.168.
On Dec 7, 2003, at 11:15 PM, Matt Edwards wrote:
consumer: "I have two computers. I need to make sure they can both
get on
the internet." (Thinking: "I know my buddy did this with his setup")
ISP: "Oh you mean you need a second IP address, right?" (Thinking:
"The poor
guy doesn't know he can
PROTECTED]>
Cc: "FreeBSD questions List" <[EMAIL PROTECTED]>
Sent: Sunday, December 07, 2003 8:50 PM
Subject: Re: NATd question
> On Sun, 7 Dec 2003 19:56:14 +0300
> "Marwan Sultan" <[EMAIL PROTECTED]> wrote:
>
> > Hello Everybody,
> >
>
On Sun, 7 Dec 2003 19:56:14 +0300
"Marwan Sultan" <[EMAIL PROTECTED]> wrote:
> Hello Everybody,
>
>
>Im on FreeBSD 4.8-R fresh installation.
>and this is the configuration i will use on my LAN
>
>Internet ->connected-> DSL Router -> FreeBSD box -> HUB -> LAN
>
>DSL Router has a
On Tuesday, October 21, 2003, at 05:31 PM,
[EMAIL PROTECTED] wrote:
have you tried this reading this?
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-
natd.html
dont forget to set the gateway IP address of your network clients to
the IP address of your FreeBSD nat server.
y
have you tried this reading this?
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-natd.html
dont forget to set the gateway IP address of your network clients to
the IP address of your FreeBSD nat server.
hope this helps...
-
Check this out:
http://freebsd.peon.net/tutorials/12/
Cheers,
Alhagie
--- Michelle <[EMAIL PROTECTED]> wrote:
>
> On Tuesday, October 21, 2003, at 04:08 PM, Alhagie
> Puye wrote:
>
> > Are you using ipfw or ipfilter?
>
> ipfw
>
>
> >
> > --- Michelle <[EMAIL PROTECTED]> wrote:
> >> i am not
On Tuesday, October 21, 2003, at 04:08 PM, Alhagie Puye wrote:
Are you using ipfw or ipfilter?
ipfw
--- Michelle <[EMAIL PROTECTED]> wrote:
i am not aware of a natd.conf file. i edited the
rc.conf file to
enable natd and specify the interface. the firewall
rule i am using
for natd is: add dive
Are you using ipfw or ipfilter?
--- Michelle <[EMAIL PROTECTED]> wrote:
> i am not aware of a natd.conf file. i edited the
> rc.conf file to
> enable natd and specify the interface. the firewall
> rule i am using
> for natd is: add divert natd all from any to any via
> fxp0.
>
> On Tuesday, O
i thought one only needed to use route command when routing between 3
or more networks. i have a local LAN and a subnet. however, i tried
the command: route add -net 192.x.x.x 64.x.x.x
i received the error message:
route: writing to routing socket: File exists
add net 192.x.x.x: gateway 64.x.x
The next question on my mind would be whether or not you've established
routes?
`man route`
Hope it helps,
Tyler McGeorge
...to the rescue...
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Michelle
Sent: Tuesday, October 21, 2003 3:00 PM
To: [EMAIL PROTECT
13 matches
Mail list logo
