On Jul 8, 2006, at 2:19 PM, Rico Secada wrote:
On Sat, 8 Jul 2006 12:43:45 -0400
Anthony Agelastos <[EMAIL PROTECTED]> wrote:
Hi, I just installed cups from ports and had a similar problem with
printing. Normally I haven't got any problems.
The printer is a HL-1430 connected to USB and the
On Sat, 8 Jul 2006 12:43:45 -0400
Anthony Agelastos <[EMAIL PROTECTED]> wrote:
Hi, I just installed cups from ports and had a similar problem with printing.
Normally I haven't got any problems.
The printer is a HL-1430 connected to USB and the error I got was: 'Unable to
open USB device "usb:/
On Jun 29, 2006, at 6:51 PM, Jan-Espen Pettersen wrote:
I just tried /dev/unltp0 and I have the same issues. Basically, I
killed all of the jobs, made your change, submitted a test page,
watched as nothing happened (it didn't display any messages in the
web
interface), did a /usr/local/etc
On Saturday 01 July 2006 12:40, Jan-Espen Pettersen wrote:
> > The problem is that read operations on usb printers might just
> > block/hang with no data from the printer (?). ulpt doesn't have
> > non-blocking I/O, so I've made a patch that simply times out read
> > operations, and disables furthe
> The problem is that read operations on usb printers might just
> block/hang with no data from the printer (?). ulpt doesn't have
> non-blocking I/O, so I've made a patch that simply times out read
> operations, and disables further reads if it detects a blocking/stall
> condition. It is possible
Rainer Heesen --- wrote:
> I have a Minolta PagePro 1350 printer. When I use the workaround I get the
> error 'raw printers cannot use file: devices!'
>
> Is there another workaround?
>
> [EMAIL PROTECTED] ~$ lpstat -d -p -t
> system default destination: Minolta
> printer Minolta disabled sinc
I have a Minolta PagePro 1350 printer. When I use the workaround I get the
error 'raw printers cannot use file: devices!'
Is there another workaround?
[EMAIL PROTECTED] ~$ lpstat -d -p -t
system default destination: Minolta
printer Minolta disabled since Fri Jun 30 17:14:11 2006 -
Raw pr
>
> I found that the usb backend stalled here before actually doing any
> work. Before I've done any actual debugging of the backend, I suspect
> that it is being blocked on a status read attempt, though this is only
> my current guess.
>
> Here is a workaround:
>
> In printers.conf () you will pro
> I just tried /dev/unltp0 and I have the same issues. Basically, I
> killed all of the jobs, made your change, submitted a test page,
> watched as nothing happened (it didn't display any messages in the web
> interface), did a /usr/local/etc/rc.d/cupsd restart, killed the test
> page, then resubm
Anthony Agelastos wrote:
On Jun 25, 2006, at 11:37 PM, Nicolas Blais wrote:
On Sunday 25 June 2006 23:32, John Nielsen wrote:
On Sunday 25 June 2006 20:04, Anthony Agelastos wrote:
On Jun 25, 2006, at 7:35 PM, John Nielsen wrote:
On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
I upd
On Jun 25, 2006, at 11:37 PM, Nicolas Blais wrote:
On Sunday 25 June 2006 23:32, John Nielsen wrote:
On Sunday 25 June 2006 20:04, Anthony Agelastos wrote:
On Jun 25, 2006, at 7:35 PM, John Nielsen wrote:
On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
I updated CUPS and I cannot pri
OOPS! I apologize to everyone on this list for not compressing my
error_log file and wasting your time and bandwidth downloading it.
On Jun 27, 2006, at 7:43 PM, Anthony Agelastos wrote:
On Jun 25, 2006, at 11:37 PM, Nicolas Blais wrote:
On Sunday 25 June 2006 23:32, John Nielsen wrote:
O
On вс, 2006-06-25 at 23:32 -0400, John Nielsen wrote:
> On Sunday 25 June 2006 20:04, Anthony Agelastos wrote:
> > On Jun 25, 2006, at 7:35 PM, John Nielsen wrote:
> > > On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
> > >> I updated CUPS and I cannot print to my USB laser printer. The web
On Monday 26 June 2006 00:15, Micah wrote:
> John Nielsen wrote:
> > On Sunday 25 June 2006 20:04, Anthony Agelastos wrote:
> >> On Jun 25, 2006, at 7:35 PM, John Nielsen wrote:
> >>> On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
> I updated CUPS and I cannot print to my USB laser pri
On Jun 25, 2006, at 9:05 PM, Micah wrote:
Anthony Agelastos wrote:
Hello and thank you for the very quick reply.
On Jun 25, 2006, at 7:34 PM, albi wrote:
On Sun, 25 Jun 2006 19:28:35 -0400
"Anthony Agelastos" <[EMAIL PROTECTED]> wrote:
I updated CUPS and I cannot print to my USB laser print
John Nielsen wrote:
On Sunday 25 June 2006 20:04, Anthony Agelastos wrote:
On Jun 25, 2006, at 7:35 PM, John Nielsen wrote:
On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
I updated CUPS and I cannot print to my USB laser printer. The web
interface shows the following:
hp_LaserJet_1160
On Sunday 25 June 2006 23:32, John Nielsen wrote:
> On Sunday 25 June 2006 20:04, Anthony Agelastos wrote:
> > On Jun 25, 2006, at 7:35 PM, John Nielsen wrote:
> > > On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
> > >> I updated CUPS and I cannot print to my USB laser printer. The web
> >
On Sunday 25 June 2006 20:04, Anthony Agelastos wrote:
> On Jun 25, 2006, at 7:35 PM, John Nielsen wrote:
> > On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
> >> I updated CUPS and I cannot print to my USB laser printer. The web
> >> interface shows the following:
> >>
> >> hp_LaserJet_1160
Anthony Agelastos wrote:
On Jun 25, 2006, at 9:05 PM, Micah wrote:
Anthony Agelastos wrote:
Hello and thank you for the very quick reply.
On Jun 25, 2006, at 7:34 PM, albi wrote:
On Sun, 25 Jun 2006 19:28:35 -0400
"Anthony Agelastos" <[EMAIL PROTECTED]> wrote:
I updated CUPS and I cannot p
Anthony Agelastos wrote:
Hello and thank you for the very quick reply.
On Jun 25, 2006, at 7:34 PM, albi wrote:
On Sun, 25 Jun 2006 19:28:35 -0400
"Anthony Agelastos" <[EMAIL PROTECTED]> wrote:
I updated CUPS and I cannot print to my USB laser printer. The web
interface shows the following:
Hello and thank you for your reply.
On Jun 25, 2006, at 7:47 PM, Garrett Cooper wrote:
Would you reply with the output you get when you run "ls -l /dev/
ulpt0" please?
Thanks,
%ls -l /dev/ulpt0
crw-r--r-- 1 root operator0, 68 Jun 25 19:01 /dev/ulpt0
Thank you for your help. Is this a
On Sun, 25 Jun 2006 19:28:35 -0400
"Anthony Agelastos" <[EMAIL PROTECTED]> wrote:
> I updated CUPS and I cannot print to my USB laser printer. The web
> interface shows the following:
>
> hp_LaserJet_1160Le (Default Printer) "Unable to open USB device
> "usb:/dev/ulpt0": Permission denied"
>
On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
> Hello all,
>
> I updated CUPS and I cannot print to my USB laser printer. The web
> interface shows the following:
>
> hp_LaserJet_1160Le (Default Printer) "Unable to open USB device
> "usb:/dev/ulpt0": Permission denied"
> Description: H
Would you reply with the output you get when you run "ls -l /dev/
ulpt0" please?
Thanks,
-Garrett
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECT
On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
> I updated CUPS and I cannot print to my USB laser printer. The web
> interface shows the following:
>
> hp_LaserJet_1160Le (Default Printer) "Unable to open USB device
> "usb:/dev/ulpt0": Permission denied"
> Description: Hewlett-Packard
On Jun 25, 2006, at 7:35 PM, John Nielsen wrote:
On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
I updated CUPS and I cannot print to my USB laser printer. The web
interface shows the following:
hp_LaserJet_1160Le (Default Printer) "Unable to open USB device
"usb:/dev/ulpt0": Permissio
Hello and thank you for the very quick reply.
On Jun 25, 2006, at 7:34 PM, albi wrote:
On Sun, 25 Jun 2006 19:28:35 -0400
"Anthony Agelastos" <[EMAIL PROTECTED]> wrote:
I updated CUPS and I cannot print to my USB laser printer. The web
interface shows the following:
hp_LaserJet_1160Le (Defau
27 matches
Mail list logo