I just installed 5.0 on a Compaq 360 with no problems. It booted from
the CD just fine. It has a SmartArray controller in it also. I should
be able to test it on a DL 380 soon.
I did have problems with an old Compaq Proliant Dual Pentium Pro box
with SmartArray controller. I had to boot from a
> > I'm having problems with Compaq Hardware as well.
>
> I don't know if this helps you, but the Compaq SmartArray Adapters have
> a service partition which must be the boot-partition.
>
> Only installed linux on these machines so far. I know that you have to
> configure the boot-partition for you
> I'm having problems with Compaq Hardware as well.
I don't know if this helps you, but the Compaq SmartArray Adapters have
a service partition which must be the boot-partition.
Only installed linux on these machines so far. I know that you have to
configure the boot-partition for your OS but don
> I am a FreeBSD Newbie trying to install 5.0, but I will Install any
> Version that will work, on a Compaq Proliant, Dual 550 MHz with 512 MB
> RAM, Smart Array 221 RAID Controller with a RAID 5 Array (4 * 18.2GB)
> drives. The installation hangs after discovering the SCSI Tape Drive.
> Wi
I am a FreeBSD Newbie trying to install 5.0, but I will Install any
Version that will work, on a Compaq Proliant, Dual 550 MHz with 512 MB
RAM, Smart Array 221 RAID Controller with a RAID 5 Array (4 * 18.2GB)
drives. The installation hangs after discovering the SCSI Tape Drive.
With the foll
