It should be noted that my raid controller driver (htprr) is exhibiting
the same issue. Before 8.0, both the ata and htprr drivers would
recognize a HD insertion and the disks information would be scanned and
device nodes created. On 8.0, the best I can see is that the drive
insertion is dete
It should be noted that my raid controller card driver (htprr) is
exhibiting the same issue. Before 8.0, both the ata and htprr drivers
would recognize a HD insertion and the disks information would be
scanned and device nodes created. On 8.0, the best I can see is that
the drive insertion is
I don't have any /dev/ada* devices, so I assume I'm using the original
ata driver. I haven't done any kernel customization, and am running the
distribution's kernel (upgraded with the freebsd-update tool). Does the
older driver no longer detect drive insertion?
Rob
Steve Polyack wrote:
Rob
Rob wrote:
I'm running a 10 hot-swap SATA disk ZFS pool and recently upgraded
from 7.2 to 8. Since I upgraded, freebsd isn't spinning up or
recognizing a new drive that is inserted. In freebsd 7.[0,2], I could
remove a drive and insert a new one and freebsd would recognize it,
spin it up, an
I'm running a 10 hot-swap SATA disk ZFS pool and recently upgraded from
7.2 to 8. Since I upgraded, freebsd isn't spinning up or recognizing a
new drive that is inserted. In freebsd 7.[0,2], I could remove a drive
and insert a new one and freebsd would recognize it, spin it up, and
create the
