On Mon, Dec 09, 2002 at 12:31:38AM +0100, Francesco Casadei wrote:
>
[snip]
>
> P.S. sorry for the long post, but I'm sure the information I gave you will help
> you to diagnose the problem.
>
[snip]
>
> end of the original message
Ahem... actually the post should have been longer... in fact I
On Sat, Dec 07, 2002 at 09:35:13AM +0200, Vladislav V. Zhuk wrote:
[snip]
>
> I don't think like you.
> I check my hardware and I consider that problem in new ATA driver.
> Under FreeBSD 4.1.1 my hardware work excellent.
> After 4.5 release I get more troubles with IDE devices.
> Some bugs was fix
Vladislav V. Zhuk wrote:
> On Fri, Dec 06, 2002 at 09:34:09AM -0800, Darren Pilgrim wrote:
>> This is almost always the sign of a bad cable, but it can also be
>> the logic board on the drive dying (though much rarer). Check your
>> cables. Better yet, go to your local hardware store and buy a new
On Fri, Dec 06, 2002 at 09:34:09AM -0800, Darren Pilgrim wrote:
> Thomas T. Veldhouse wrote:
> >Can anybody explain what has happened here? My machine seems to be
> >functioning normally.
> >
> >ad0: READ command timeout tag=0 serv=0 - resetting
> >ata0: resetting devices .. ata0-slave: ATA identi
Tenebrae wrote:
BTW, the dead drive is an IBM Deskstar 75GXP (DTLA-307060). I miss it. I
wish there was some way to recover it. 30GB of data gone. Maybe I'll try
putting it in the freezer and drop it into a different machine and see if
I can mount it...
Funny, I had *exactly* the same thing
On Fri, 6 Dec 2002, Darren Pilgrim wrote:
> Thomas T. Veldhouse wrote:
> > Can anybody explain what has happened here? My machine seems to be
> > functioning normally.
> >
> > ad0: READ command timeout tag=0 serv=0 - resetting
> > ata0: resetting devices .. ata0-slave: ATA identify retries exceed
> Date: Fri, 06 Dec 2002 09:34:09 -0800
> From: Darren Pilgrim <[EMAIL PROTECTED]>
> Sender: [EMAIL PROTECTED]
>
> Thomas T. Veldhouse wrote:
> > Can anybody explain what has happened here? My machine seems to be
> > functioning normally.
> >
> > ad0: READ command timeout tag=0 serv=0 - resettin
Thomas T. Veldhouse wrote:
Can anybody explain what has happened here? My machine seems to be
functioning normally.
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. ata0-slave: ATA identify retries exceeded
done
This is almost always the sign of a bad cable, but it
