When I run chkrootkit I get the following lines.
Checking `lkm'... You have 107 process hidden for readdir command
chkproc: Warning: Possible LKM Trojan installed
rkhunter doesn't seem to find anything.
I suspect that my machine might be compromised.
running "ls" in the /proc directory retur
I am having the same problem.
I have tried the "make fetchindex" approach but it doesn't solve it for me.
you mentioned something about /usr/ports/UPDATING, but was unable to find
a relevant entry.
can you please tell me the entry date that helped you with this problem?
Thank you,
Tomoki Taniguch
powered
port 2 powered
port 3 powered
port 4 powered
Any suggestions would be appreciated.
TIA,
Tomoki
On 18 Apr 2006 10:20:21 -0400, Lowell Gilbert <
[EMAIL PROTECTED]> wrote:
>
> "FreeBSD MailingLists" <[EMAIL PROTECTED]> writes:
>
> > I purchased a u
from
http://www.ratocsystems.com/software/linux/pci60_060306.tar.gz
anyway to convirt the driver for freebsd?
or to see if it's compatible with a different freebsd driver?
-TIA
Tomoki
On 4/18/06, FreeBSD MailingLists <[EMAIL PROTECTED]> wrote:
>
> I installed a pci-serial board to my freebsd box.
I installed a pci-serial board to my freebsd box.
But it doesn't seem to be recognized.
dmesg yields this line
>pci3: at device 3.0 (no driver attached)
pciconf -lv yieds
>[EMAIL PROTECTED]:3:0: class=0x070002 card=0x60011195 chip=0x015213a8 rev=0x01
hdr=0x00
>vendor = 'Exar Corp.'
>cl
I have a usb-serial controller attached to my freebsd 5.4 box
it is loaded as ucom0.
I have connect the serial cable from the UPC to it.
when it first starts I have no problems but after a while I get an error
message saying that the serial connection to the UPS is lost.
The message repeats about
Sorry, folks. Nevermind, I'm an idiot...
I just use ucom0 as the tty or cua device
ha ha ha
On 4/17/06, FreeBSD MailingLists <[EMAIL PROTECTED]> wrote:
>
> i have a USB-Serial Controller by Prolific Technology, Inc.
>
> I tested to see if the device works on Free
i have a USB-Serial Controller by Prolific Technology, Inc.
I tested to see if the device works on FreeBSD on FreeBSD6 machine.
the serial controller works when i load ucom and uplcom modules.
a ucom0 device is generated along with tty and cua devices.
when i connect to a FreeBSD 5.4 machine wit
I have attached a modem to my freebsd box and trying to setup a simple
dial-in terminal service.
I have tried to follow the instructions in the freebsd handbook.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/dialup.html
I am able to get a terminal working on the serial port (tested wi
i am trying to setup a dial-in terminal service between 2 machines with
serial modems attached.
In the FreeBSD Handbook the instructions for a dial-out service use the tip
and cu commands.
I have been using minicom to connect to varius serial terminals such as
cisco routers, so i am used to it.
Is
I purchased a usb modem recently and connected it to my FreeBSD box to see
if it is compatible.
I have recompiled my kernel with
device ucom
device umodem
When I connect the modem I get the following kernel message.
ucom0: OMRON OMRON ME5614U2 DATA FAX MODEM, rev 1.10/1.00, addr 2, iclass
2/2
uco
Is there anyway to switch what gets recognized as sio0 and sio1?
currently a IRDA device is being recognized as sio0 and a 16550A com port is
sio1.
I would like to switch them so taht the 16550A com port is recognized as
sio0.
Is there a way to achieve this?
sis0: Silicon Revision: DP83816A
sio
I have a bunch of production servers running 5-Stable branch and I was
considering upgrading to 6-Stable.
I have never upgraded across major version changes via source.
Is this a bad idea?
what pitfalls should i be aware of before starting?
TIA,
Tomoki Taniguchi
___
I am trying to find analog modems that can be connected to freebsd via usb
cable.
I will be using to receive incoming remote serial connections in case of
problems.
I would appreciate any suggestions.
TIA,
Tomoki Taniguchi
___
freebsd-questions@freebsd.o
about how much (what percent) bandwidth overhead should I expect if I
connect two hosts using a UNENCRYPTED gif tunnel over a 2Mbps
connection?
TIA,
Tomoki
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-
I am trying to connect 2 FreeBSD 5.4 boxes with an IPSec tunnel using
racoon. The problem is the second box is behind a nat'd gateway.
The gateway router is a commercial box with "IPSEC Passthrough"
enabled.
What do I need to do to get this to work?
Which IP (global or private) should I use whe
r.
which leads me to believe the error is outside the ports tree itself.
-tomoki
On 6/6/05, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> On Mon, Jun 06, 2005 at 09:46:35AM +0900, FreeBSD MailingLists wrote:
> > Yes, Everyday I try this I grab the latest copy of ports.tar.gz from a
d the file to patch or the file cannot be patched
correctly.
is patch port of "world" or do I need to update a pkg?
On 6/6/05, Giorgos Keramidas <[EMAIL PROTECTED]> wrote:
> On 2005-06-06 00:24, FreeBSD MailingLists <[EMAIL PROTECTED]> wrote:
> > ===> Applyi
i'm getting a bunch of weird patch errors. i've attached the relevant
error messages at the bottom. something makes me feel that this isn't
a problem with the individual ports. any ideas?
TIA,
Tomoki
===> Applying FreeBSD patches for tiff-3.7.2
4 out of 4 hunks failed--saving rejects to lib
is the FreeBSD boot manager capable of booting a logical partition?
I have am setting up a multi-boot system and it looks like I will have
to put linux on a logical partition. will boot0 recoginze the logical
partition as bootable?
TIA,
Tomoki Taniguchi
_
I have a sony Vaio U50. It's a pretty cool device but sony seems to
be locking out non-Sony floppy/cdrom drive during the boot process.
As a result I can't use either of my usb-floppy or usb-cdrom drive,
even though the bios boot order is set to try floppy, optical drive,
then HDD.
I want to ins
I have just install freebsd 5.4 on a laptop, and I have noticed two things
1) even with pccard_enable=NO a inserted card is configured
2) I see no pccardd
even after I set pccard_enable=YES and then run /etc/rc.d/pccard
start, nothing seems to run
is pccardd no longer handling pcmcia configura
I have a duel boot system setup with the Freebsd Boot Manager in the MBR.
Is there anyway to change the default boot selection from with in the
FreeBSD environment?
What I mean is, if I am remotely accessing my dual boot FreeBSD box,
and I want it to boot into the other OS, is there a command that
I fished out an old laptop out of my closet.
It is a Pentium 233 MMX w/ 64MB Ram and 12G HD
I am thinking about setting up a small station for browsing the web.
Which would perform better on such a system? FreeBSD or NetBSD?
I know that this is a mailing list for FreeBSD users, but I am hoping
th
that worked
thanks
On Wed, 2 Mar 2005 16:37:20 +0100, Daniel Gerzo <[EMAIL PROTECTED]> wrote:
> Hi FreeBSD,
>
> Wednesday, March 2, 2005, 4:31:56 PM, you wrote these comments:
>
> > I have the following ~/.vimrc
>
> > syn on
> > set incsearch
> > set ignorecase
> > set smartcase
> > set scroll
I have the following ~/.vimrc
syn on
set incsearch
set ignorecase
set smartcase
set scrolloff=2
set wildmode=longest,list
I want to set this up as the default settings for my system.
under linux i think there was a way to set global vimrc settings by writing to
/etc/vimrc
or
/etc/vim/vimrc
depend
r verion 3.5
at.
http://openbsd.automagic.org/faq/pf/index.html
On 01 Mar 2005 13:19:25 +0100, Peter N. M. Hansteen <[EMAIL PROTECTED]> wrote:
> FreeBSD MailingLists <[EMAIL PROTECTED]> writes:
>
> > when I start pf I get:
> >
> > Enabling pf.
> > /etc/
I recently installed 5.3. updated source and recompiled the kernel and world.
now up to 5.4-PreRelase.
I decided to try PF instead of IPFW that I am used to...
I was setting up a simple pf.conf to test using anchors
block in all
pass in quick on em1 all
anchor ssh-anchor
load anchor ssh-anchor f
I have recently installed FreeBSD 5.3 from CD onto a couple of
servers. I updated the /usr/src and /usr/ports to RELENG_5. When I
try to install tcpdump from the ports, the make fails with the last
line being
Error: shared library "pcap.2" does not exist
*** Error code 1
I know I didn't have t
I have a FBSD box acting as a gateway for the network. I was
wondering if there is anyway to set up the routing table so I can
setup automatic backup routes?
I want the system to try to route packets to A. But if A is down,
automatically set the route to B...
Is there anyway to set this up?
TI
30 matches
Mail list logo
