On 21.05.2013, at 22:40, Charles Swiger wrote:
>>
>> Mem: 55G Active, 23G Inact, 11G Wired, 3729M Cache, 9838M Buf, 97M Free
>> Swap: 49G Total, 14M Used, 49G Free
>>
>>
>> PID USERNAME THR PRI NICE SIZERES STATE C TIME WCPU COMMAND
>> 93273 username103 520 141G
Hello,
Can you please explain me the meaning of RES column in top(1) output:
as far as I understand from man-page, it is resident portion of the process,
that is the amount of memory process takes from RAM. But I get:
Mem: 55G Active, 23G Inact, 11G Wired, 3729M Cache, 9838M Buf, 97M Free
Swap:
pport in the loader menu, and enable
debugging.
You could also try to reset your system's BIOS settings, if you know what
you're doing of course. ;)
--
Dmitry Sarkisov
<-\ Powered by
<---o
<-/ FreeBSD
__
On 19-02-2013, Tue [23:20:41], b...@todoo.biz wrote:
> Hello,
>
>
> I am about to start deploying a large system (about 18 To which can grow up
> to 36 To) based on a big Intel platform with lot's of fancy features to have
> turbo boosted platform (ZIL on SSD + system on dongle if I go for Free
{ # (Russian lang, ORIGINAL)
Имеется::
1) Загружаемая некриптованная партиция /boot со скриптами ядра
9.0-release и самим ядром;
2) Криптованная только файл-ключом (ключ лежит сейчас в (1)/boot )
рутовая партиция со всем своим содержимым.
Проблема:
При загрузке криптованая партиция сама монти
-yf / dev/aacd0
** / Dev/aacd0 (NO WRITE)
** Last Mounted on / var / ftp
** Phase 1 - Check Blocks and Sizes
As I understand it does not fix the fsck filesystem.
--
С уважением,
Dmitry mailto:dmi...@zhigulinet.ru
___
freebsd
Hi!
2012/2/29, jb :
> Hi,
> I very often hear this metallic (mechanical) clicking from my hard disk when
> it is active. I experience this behavior under FreeBSD only (not other OSs).
> Is there any way to figure out what it means ?
Some time ago I had a similar problem with an external WD Scorpi
Hello!
I am trying to install 9.0-RELEASE from standard amd64 memstick image.
During the install huge amount of "rescan already queued" messages
breaks installer interface.
(noperiph:ata1:0:-1:-1): rescan already queued
(noperiph:ata1:0:-1:-1): rescan already queued
(noperiph:ata1:0:-1:-1): resca
=
xcb-proto =
xcmiscproto =
xextproto =
xf86bigfontproto=
xorg-macros =
xproto =
xtrans =
--
С уважением,
Dmitry
=
xcb-proto =
xcmiscproto =
xextproto =
xf86bigfontproto=
xorg-macros =
xproto =
xtrans =
--
С уважением,
Dmitry
=
xcb-proto =
xcmiscproto =
xextproto =
xf86bigfontproto=
xorg-macros =
xproto =
xtrans =
--
С уважением,
Dmitry
enty of solutions/examples in the Net.
--
Best wishes,
Dmitry Sarkisov
<--\
<---+--
<--/
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
ST should be able to mirror the ZFS
> container in near-RT and be tolerant of things like network issues.
> --
> Devin
>
I personally wouldn't rely on such a new technology as HAST, considering the
importancy of backups.
ZFS has some nice features
bunch
of them build with default gcc version 4.2.1?
TIA
--
Best wishes,
Dmitry Sarkisov
<--\
<---+--
<--/
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send a
On 10-01-2012, Tue [10:16:06], Matthew Seaman wrote:
> On 10/01/2012 09:23, Dmitry Sarkisov wrote:
> > Would be nice to know if there any plans on switching to pkgng or any other
> > pkg management
> > system in a future.
>
> pkgng is under active development with
te binary package format
> (pkg-*) and hope that either pkgng (http://wiki.freebsd.org/pkgng) or
> new PBI format in PC-BSD (http://wiki.pcbsd.org/index.php/PBI9_Format)
> will gain more traction in the community.
>
> Regards,
> --
> Nino
Would be nic
://wiki.freebsd.org/Releng/8.2TODO
Quote: After BETA1:
20101209 - Unbreak sysinstall ALL distributions installation (BruceCran)
(r216243, merged as r216325)
---
Whether it means, what everything is all right?
best regards,
Dmitry Postolov
anta...@land.ru
I have the following card:
siba_b...@pci0:12:0:0: class=0x028000 card=0x000c1028 chip=0x431514e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class = network
And it doesn't work with bwn driver (perhaps that's a confi
t load firmware image, error 2
bwn0: the fw file(bwn-open_v4_lp_ucode15) not found
Am I missing something important?
Thanks!
--
Sincerely yours, Dmitry V. Krivenok
e-mail: krivenok.dmi...@gmail.com
skype: krivenok_dmitry
jabber: krivenok_dmi
can I cosequently safely restore pkgdb with pkgdb -uF?
TIA
С уважением, Дмитрий
Best regards, Dmitry
email: eingorn...@gmail.com
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
.
The problem is how to discover which file(s) they belong to.
TIA
--
С уважением, Дмитрий
Best regards, Dmitry
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
ything will change by us not providing a port we
have absolutely totally utterly 100% right to provide? That is
just silly.
The port from now on is available here (removed from people.freebsd.org):
http://mirror.amdmi3.ru/ports/ion3-20090110.port.tar
--
Dmitry Marakasov . 55B5 0596 FF1E
for a user.
--
Dmitry Marakasov . 55B5 0596 FF1E 8D84 5F56 9510 D35A 80DD F9D2 F77D
amd...@amdmi3.ru ..: jabber: amd...@jabber.ruhttp://www.amdmi3.ru
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-q
x27;re doing.
But I'll still mail ahze (who removed the port) and adamw (who
maintained it last).
--
Dmitry Marakasov . 55B5 0596 FF1E 8D84 5F56 9510 D35A 80DD F9D2 F77D
amd...@amdmi3.ru ..: jabber: amd...@jabber.ruhttp://www.amdmi3.ru
__
* Albert Shih (albert.s...@obspm.fr) wrote:
> Thanks for Dmitry for this ports. I'm going to keep this thing somewhere
No need to, if it works fine and there are no objections for it,
I'll commit it to the tree.
--
Dmitry Marakasov . 55B5 0596 FF1E 8D84 5F56 9510 D35A 80DD
t works yet.
--
Dmitry Marakasov . 55B5 0596 FF1E 8D84 5F56 9510 D35A 80DD F9D2 F77D
amd...@amdmi3.ru ..: jabber: amd...@jabber.ruhttp://www.amdmi3.ru
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebs
ike to help for the ports but as you can see I unable to build for
> myself.
I've seen the license change too. I'm working on the port currently.
--
Dmitry Marakasov . 55B5 0596 FF1E 8D84 5F56 9510 D35A 80DD F9D2 F77D
amd...@amdmi3.ru ..: jabber: amd...@jabber.ruhttp://www.
Hello,all!
The problem is as follows.
A couple of days ago I did transition from linux_base-fc4 (default
linux support module) to linux_base-fc6. The purpose was to install
skype, which rquires at least linux_base-fc6 support. Along with this
I completely reinstalled ("pkg_delete" then
"make instal
On Sun, May 17, 2009 at 08:46:29AM +0200, Pieter Donche wrote:
> FreeBSD7-amd64
> linux_base-fc-4_14 Base set of packages needed in Linux mode (for i386/amd64)
>
> When running the install script, I get
>
> cat: /proc/cpuinfo: No such file or directory
> Error: Your computer's processor is missi
[14-May-2009 18:04:50] PHP Warning: Cannot load module 'PDO' because
required
module 'spl' is not loaded in Unknown on line 0
-------
Haw fix this problem?
Thanks,
Dmitry.
Please go back to dir
On Thu, Apr 02, 2009 at 06:26:23PM +0200, Ewald Jenisch wrote:
> On Thu, Apr 02, 2009 at 08:04:38PM +0400, Chagin Dmitry wrote:
> >
> > linux_expat depends on running linuxulator
> > (USE_LDCONFIG=YES in Makefile) so kldload linux :)
> >
>
> Hi Dmitry,
>
On Thu, Apr 02, 2009 at 05:28:23PM +0200, Ewald Jenisch wrote:
> Hi,
>
> While upgrading my ports I ran into a problem during the upgrade of
> textproc/linux-expat. After the usual cvsup, "make fetchindex", pkgdb
> -F I started "portupgrade -arR which resulted in a "Stop" because of a
> syntax err
Hi to All! Sorry for my bad English, i am beginning FreeBSD user from
Russia..___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freeb
Hi to All! Sorry for my bad English. My problem: I am have 3G/EDGE modem ZTE
MF622+ and FreeBSD 7.1. In using KPPP (KDE 3.5.10) my modem can't connect to
EDGE provider, because in KPPP not enabled option Auto DNS setting. If manually
set this option, that says tech support of provider, pppd prin
Hi to All! Sorry for my bad English, i am beginning FreeBSD user from
Russia..___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freeb
On Sat, Jan 17, 2009 at 01:31:16PM -0800, Rem P Roberti wrote:
> The output of "kdump -m 128" can be found here:
>
> http://home.comcast.net/~remegius/skypetrace.txt
>
>
please, use linux_kdump instead.
--
Have fun!
chd
___
freebsd-questions@freebsd
On Thu, Oct 30, 2008 at 10:30:14AM +0300, Vladimir Grebenschikov wrote:
> On Wed, 2008-10-29 at 19:05 +0100, Gary Jennejohn wrote:
>
> > I don't have flashblock installed, but http://www.mtvmusic.com/ hangs
> > firefox 100% of the time. Strangely enough, under Linux it works just
> > fine and I h
On Wed, Oct 29, 2008 at 07:05:51PM +0100, Gary Jennejohn wrote:
> On Wed, 29 Oct 2008 11:50:27 -0400
> Mikhail Teterin <[EMAIL PROTECTED]> wrote:
>
> > Sent by Vladimir Grebenschikov:
> > > I've seen temporary FF lockups with flashblock FF plugin enabled.
> > Same here. Sometimes it works and some
RW wrote:
i try to attach geli provider, which i have used in 6.3-RELEASE to
6.1-RELEASE:
# geli attach -k /root/da1.key /dev/da1
MD5 hash mismatch for /dev/da1
in 6.3-R it still attaches successfully, but in 6.1-R is not. system
with 6.1-R is not my own, so i can't update it. how i can attac
i try to attach geli provider, which i have used in 6.3-RELEASE to
6.1-RELEASE:
# geli attach -k /root/da1.key /dev/da1
MD5 hash mismatch for /dev/da1
in 6.3-R it still attaches successfully, but in 6.1-R is not. system
with 6.1-R is not my own, so i can't update it. how i can attach geli
pro
ved, I would
rather use some forum.
>
> --
>Tore
>
Best regards,
Dmitry RCL Rekman
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hi,
On Sat, Mar 22, 2008 at 7:19 PM, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> Dmitry RCL Rekman wrote:
> > Hi,
> >
> > On Sat, Mar 22, 2008 at 6:57 PM, Kris Kennaway <[EMAIL PROTECTED]
> > <mailto:[EMAIL PROTECTED]>> wrote:
>
more than 5
minutes or so. I sort of "cured" it by restarting moused every 5 minutes
with a cron job - so next time you may also try restarting moused before
unplugging the mouse.
By no means it is meant to be correct solution, I am just suggesting you to
check whether t
Hi,
On Sat, Mar 22, 2008 at 6:57 PM, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> Dmitry RCL Rekman wrote:
> > Hi,
> >
> > On Sat, Mar 22, 2008 at 6:40 PM, Kris Kennaway <[EMAIL PROTECTED]
> > <mailto:[EMAIL PROTECTED]>> wrote:
> >
> &g
8 Feb 29 12:21 /usr/lib/libpthread.a ->
libthr.a
lrwxr-xr-x 1 root wheel 10 Feb 29 12:21 /usr/lib/libpthread_p.a ->
libthr_p.a
>
> Kris
>
>
>
Best regards,
Dmitry RCL Rekman
___
freebsd-questions@freebsd.org mailing list
ht
s a followup to the earlier messages, so context was lost
> from your mails.
>
Ok, my fault - should have taken the same subject :-)
If you are willing to further investigate the issue, I can provide more
details about my system or even give you the shell access.
>
> Kris
>
Best
Hi,
On Sat, Mar 22, 2008 at 5:47 PM, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> Dmitry RCL Rekman wrote:
> > Hi,
> >
> > On Sat, Mar 22, 2008 at 3:52 PM, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> >
> >> RCL wrote:
> >>> Hi,
&g
t; > solution from Windows world :-)
>
> Are you certain that your portupgrade -af completed successfully after
> you upgraded the base OS? If this was not completed it will cause
> problems along these lines.
>
Well, it actually did not rebuild the KDE & friends (becau
e I can find older ports.tar.gz files that contain
> wine 0.9.37 to 0.9.39 releases?
ports/ports-mgmt/portdowngrade will help you.
--
Dmitry A. Marakasov| jabber: [EMAIL PROTECTED]
[EMAIL PROTECTED] | http://www.amdmi3.ru
___
freebsd-questions@fre
might be?
Or, if noone would be able to answer this, how I would print messages
from kernel (I'd recompile it for that purpose) to identify which
device it picked up for console IO -- and especially, how I print
that either to a file, or directly to /dev/console?
--
Thank you,
Dmitry
On Thu, 4 Oct 2007 21:11:14 -0700 (PDT)
Tim Judd <[EMAIL PROTECTED]> wrote:
> Hi all,
>
> Recently, for pure entertainment and a little bit of a experience
> thing, I have been looking and/or finding many devices that have linux
> embedded. While in of itself the fact that it works, I'm not
> di
On Mon, 01 Oct 2007 16:43:30 +0200
Sebastien <[EMAIL PROTECTED]> wrote:
> Le Lundi 01 octobre 2007 à 17:16 +0400, Dmitry Gorbik a écrit :
> > On Mon, 01 Oct 2007 10:43:21 +0200
> > Sebastien <[EMAIL PROTECTED]> wrote:
> >
> > > Hello,
> > >
On Mon, 01 Oct 2007 10:43:21 +0200
Sebastien <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I'm trying to install 6.2-amd64 on a notebook. I've some difficulties
> with xorg-7.3 and the video card. It's an Amilo pa 2510 with an ati
> radeon X1200 (series?) video card and a wxga 1280x800 wild screen.
>
On Tue, 25 Sep 2007 13:58:41 +0200 (CEST)
Christian Baer <[EMAIL PROTECTED]> wrote:
> Hi there again, peeps!
>
> Since I still can't get Pidgin to run on this box and it seems that nobody
> had any advice for me, I have decided to go at this step by step. I hope
> you can bear with me on this one
On Mon, 24 Sep 2007 11:00:33 -0700
"Steve Franks" <[EMAIL PROTECTED]> wrote:
> The freebsd laptop page is a nice resource, but it's a bit heavy on
> specifics (i.e. I have a laptop I want to install on), not so good
> generally (want to buy a laptop). So anyone have realworld advice?
> I'm not ag
uot;
See http://www.freebsd.org/releases/6.2R/hardware-amd64.html.
--
Dmitry Gorbik <[EMAIL PROTECTED]>
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
assembly-flavor intel
disassemble main
Now you can use "nexti" to run program till break & "next" will step one
instruction (if there were no debugging symbols". That was tested on a program,
compiled with nasm.
--
Dmitry Gorbik <[EMAIL PROTECTED]>
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
After installing compiz-fusion, xfce4 or gnome is launching very slow. Looks
like some timeout, xfdesktop is quite slow. Even when I don't start compiz,
this happens, but I don't start xfwm4 or metacity, so there are no conflicts
between WMs. When I logout and save current sessions with pidgin, and
Hello freebsd-questions,
I need to update mpd4 binary package via freebsd-update. After
installing FreeBSD 6.2 RELEASE I have mpd4-4.0b4.
Settings in /etc/freebsd-update.conf:
Components src world kernel
After running commands freebsd-update fetch, then freebsd-update
install I still
ool should exist to accomplish
originator's e-mail change. After all, people _do_ change their e-mails
sometimes...
- Giorgos
Sincerely, Dmitry
--
Atlantis ISP, System Administrator
e-mail: [EMAIL PROTECTED]
nic-hdl: LYNX-RIPE
___
freebsd-questi
Sincerely, Dmitry
--
Atlantis ISP, System Administrator
e-mail: [EMAIL PROTECTED]
nic-hdl: LYNX-RIPE
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ации
ООО "Компания Солинк"
--
With Best Regards, Bachilo Dmitry
Head of systems integration dept
Solink Company Ltd.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
uld edit in your configs to make it work.
Try searching through this conference, it is very popular question here. I
have a direct howto on this problem, but it is in Russian.
--
С уважением, Бачило Дмитрий
Руководитель отдела системной интеграции
ООО "Компания Соли
> I have the same situation, no sound!
>
> Best regards,
> Rico
Don't you guys know? There would not be any sound, because linux flash 9 uses
ALSA, not OSS. If there would be some wrapper sometime, we will hear the
flash, if there would not be such thing, we would not.
--
-
g/messages
Should I try dd if=/dev/ar0 of=/dev/ar0 ?
Or maybe something else?
--
С уважением, Бачило Дмитрий
Руководитель отдела системной интаграции
ООО "Компания Солинк"
--
With Best Regards, Bachilo Dmitry
Head of systems integration dep
--
С уважением, Бачило Дмитрий
Руководитель отдела системной интаграции
ООО "Компания Солинк"
--
With Best Regards, Bachilo Dmitry
Head of systems integration dept
Solink Company Ltd.
___
freebsd-questions@freebsd.org mailing list
ht
is that this book doesn't reboot or shut the power down when i
tell him to 'reboot' or 'reboot -p'. It just syncs discs and hands with no
explanations. But it works just fine.
--
С уважением, Бачило Дмитрий
Руководитель отдела системной интаграци
/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "[EMAIL PROTECTED]"
date sets with no key. The command 'date 8506131627' sets the date to ``June
13, 1985, 4:27 PM''.
--
С уважением, Бачило Дмитрий
Best Regards, Ba
В сообщении от Суббота 18 ноября 2006 10:38 Parv написал(a):
> in message <[EMAIL PROTECTED]>,
> wrote Bachilo Dmitry thusly...
>
> > FreeBSD is not Linux, FreeBSD is UNIX.
>
> Close but not quite. FreeBSD is Unix not UNIX; difference is in the
> money to be paid t
To unsubscribe, send any mail to
> "[EMAIL PROTECTED]"
FreeBSD is not Linux, FreeBSD is UNIX. FreeBSD already contains Opera binaries
and everything is OK. So?
--
С уважением, Бачило Дмитрий
Best Regards, Bachilo Dmitry
___
>
> Thanks a Lot
It's already've been said here.
Personally I use:
Apache 1.2
MySQL 5.0
PHP 5
and cucipop+sendmail
Looks stable yet.
--
С уважением, Бачило Дмитрий
Best Regards, Bachilo Dmitry
___
fre
D]"
Why don't you just relax? :-) All my FreeBSD servers are bruteforced every
second. So what?
--
С уважением, Бачило Дмитрий
Best Regards, Bachilo Dmitry
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ons
> To unsubscribe, send any mail to
> "[EMAIL PROTECTED]"
Good luck, dude, mine refused to work. I would like to hear your experience
later.
--
----
С уважением, Бачило Дмитрий
Best Regards, Bachilo Dmitry
_
able to install vulnerable ports. But again, it is VERY
DANGEROUS and you should do it only in case you know what you are doing.
--
С уважением, Бачило Дмитрий
Best Regards, Bachilo Dmitry
___
freebsd-questions@freebsd.org maili
asure, because
you will understand sysinstall's questions.
That's it.
--
С уважением, Бачило Дмитрий
Best Regards, Bachilo Dmitry
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinf
В сообщении от Среда 18 октября 2006 14:28 Tyler Thompson написал(a):
> i need a driver for a Wireless-G PCI adapter card with SpeedBooster,
> the model number is WMP54GS. and instructions on installing the
> driver. I am new to BSD. I am running Desktop BSD 1.0 AMD 64.
>
graphical user-friendly installer and some additional soft like
graphical pakage manager, wi-fi network configurator, user-mounting GUI tool
and so on. Maybe you should try DesktopBSD?
----
Best regards, Bachilo Dmitry.
www.allunix.ru - Russian UNIX portal
В сообщении от Четверг 05 октября 2006 17:17 Niek Dekker написал(a):
> Dear list,
>
> I would like to configure a monthly report of the incoming and
> outgoing amount of traffic on the network interface of my server, for
> instance in the monthly run output.
>
> Can I do this with a built in progra
В сообщении от Понедельник 18 сентября 2006 21:20 ke han написал(a):
> Has anyone experienced FreeBSD 6.1 on a Sun X4200 ? Does everything
> work? ILOM? RAID-1 ? 2 sets of RAID-1 ?...any feedback would help me
> make a decision.
> thanks, ke han
Yes, I have. FreeBSD 6.1 (both i386 and amd64 vers
В сообщении от Понедельник 21 августа 2006 16:00 Dominique Goncalves
написал(a):
> Hi,
>
> On 8/21/06, Bachilo Dmitry <[EMAIL PROTECTED]> wrote:
> > I had linux flash plugin 7 working with my native Firefox and everything
> > was ok. Them I've tried to recompile m
I had linux flash plugin 7 working with my native Firefox and everything was
ok. Them I've tried to recompile my Firefox with CPUTYPE?=pentium4 in my
rc.conf and it seemed to start working faster. Then, as an experiment, I
tried to rebuild world. And now, instead of firefox, I get this:
%firefo
02 00 03 00 01 00 00 00 24 6e 05 08 34 00 00 00 |$n..4...|
0020 e0 ac 06 00 00 00 00 00 34 00 20 00 05 00 28 00 |Ю╛..4. ...(.|
P.S. I've once found the cause of the memory leak by examining virtual address
space of my process and finding the repeated leaked pattern.
Thank
x27;t found other parts of base OS in RELENG_4 which depend on IPFW2,
though I can miss something. Also every custom utility which utilizes
must also be recompiled with IPFW2 defined and rebuilt
(and those using libalias must be rebuilt).
Sincerely, Dmitry
--
Atlantis ISP, Syst
device = 'USR 56k Internal WinModem'
class= simple comms
I've found no drivers for it...
Best regards,
Dmitry Pisklov
Developer
y any other packages.
>
> how can I do it? can I "pkg_delete -r xxx"?
>
> thanks.
>
yes you can,
ls -al /var/db/pkg
find your package name, and execute:
pkg_delete -r package_name
--
Dmitry Sidorov
PEM QA Engineer
SWsoft, I
lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Try this:
sed s/http:\\/\\/www.example.com// your_file
--
Dmitry Sidorov
PEM QA Engineer
SWsoft, Inc.
E-mail: [EMAIL PROTECTED]
ICQ UIN: 864582
___
f
#x27; or 'ntpdate', it actually updates RTC. Why do I have such an effect?
Sincerely, Dmitry
--
Atlantis ISP, System Administrator
e-mail: [EMAIL PROTECTED]
nic-hdl: LYNX-RIPE
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
any CDs at all, just listening to music
> using kscd while I wrote perl script, my computer suddenly reboots.
...
This's the last day I am reading these archives. I believe you'll have
to find a better OS that suits your needs.
--
Dmitry Mityugov, St. Petersburg, Russia
I ignore
On 10/4/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> I lost all the pasword for root, admin, etc at FreeBsd 3 and I don't know who
> to change it. and I can't access, anyone could assist me?
http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/admin.html#FORGOT-ROOT-
t; understand that MacOS X can do this instantly too.
>
> Can anybody direct me to the right way to do this in FreeBSD (using KDE?
> Gnome?)
As far as I know, KDE in FreeBSD 5.4 does not support other languages
by default; Gnome does. I managed to set up Gome at home to write in
Russi
g login accounting:
total2243.12
dd1968.99
root218.33
imagine55.59
cryonite0.12
ftp0.08
--
Dmitry Mityugov, St. Petersburg, Russia
I ignore all messages with confidentiality statements
"We live les
working out how to set up internet ;-)
> Using it will also save FreeBSD site bandwidth :-)
But I believe the handbook at www.freebsd.org is more accurate and
up-to-date than the one on the CDs.
--
Dmitry Mityugov, St. Petersburg, Russia
I ignore all messages with confidentiality statements
&qu
d / write
thing, probably with bs=4096 or more. Just make sure you don't
overwrite important data when you measure the write speed.
--
Dmitry Mityugov, St. Petersburg, Russia
I ignore all messages with confidentiality statements
"We live less by imagination than d
ention? (with names >8 chars, extensions >3 chars, and/or
lower case characters in names/extensions?)
--
Dmitry Mityugov, St. Petersburg, Russia
I ignore all messages with confidentiality statements
"We live less by imagination than despite it" - Rockwell Kent, "N by E"
_
gt; Hey Kris,
>
> I feel for ya...
>
> I'm in the position where I can receive mail from the FreeBSD
> mailing list but can't post to it.
Your post contradicts to what you're saying.
--
Dmitry Mityugov, St. Petersburg, Ru
NetBSD, FreeBSD, and
OpenBSD FAQ" contains some information on this problem:
http://www.cs.uu.nl/wais/html/na-dir/386bsd-faq/part4.html
--
Dmitry Mityugov, St. Petersburg, Russia
I ignore all messages with confidentiality statements
"We live less by imagination than despite it
, but I see that you
> are running your FSB @ 133mhz when it should be @ 166mhz. A Sempron
> 2500+ runs at 1.75ghz
Not necessarily. There are several 2500+ Sempron models that operate
at different speeds, check out for example this one:
http://www.compu
On 9/13/05, Vizion <[EMAIL PROTECTED]> wrote:
> On Tuesday 13 September 2005 02:18, the author Cisco certification
> contributed to the dialogue on-
> Please confirm (conf#9e82d2239dcd3f1fb27e1f06062cfbdb):
...
What was the reason for your post?
--
Dmitry Mityugov, St. Peter
;t have a floppy drive on
> this thing :(
...
Memtest86 runs on CDs too: http://www.memtest86.com/memtest86-3.2.iso.zip
--
Dmitry Mityugov, St. Petersburg, Russia
I ignore all messages with confidentiality statements
"We live less by imagina
a ucom0 device,
> but I see nothing like that in /dev. Is there something missing from
> my kernel? I haven't been able to find any reference to ucom in the
> GENERIC or NOTES files.
What does happen if you load uplcom kernel module?
--
Dmitry Mityugov, St. Petersburg, Russia
I ign
1 - 100 of 271 matches
Mail list logo
