I've tried to upgrade my Linux subsystem to f10 and ended up with a mess. Some
are upgraded and some aren't. Pango is currently refusing to upgrade. Here's
what I get:
[r...@bahamut /usr/ports]# portupgrade -o x11-toolkits/linux-f10-pango/
linux-pango
** Detected a package name change: linux-pa
> Maybe - just maybe - it's neccessary to recompile
> cdrecord?
I knew it would be something simple I missed.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mai
I'm not sure when this started. I thought it might have started when I added my
RAID controller which has SCSI emulation too, but the error still occurs when I
remove it. So I'm guessing it started when I upgraded to 8.0 RC1 from 7 stable.
I have a Pioneer DVD-RW. Burncd doesn't support it so I'
> Then my answer would be missing MBR or boot blocks, an
> active
> partition alone won't make a system boot. it's just a
> flag to say
> which partition is bootable, but doesn't mean that the boot
> flag
> itself makes the partition boot.
>
>
> fdisk(8) and bsdlabel(8) -- see the -B option to b
> Is the aac driver in the kernel, or loaded as a kld before
> you get
> past the boot blocks, and loader?
It's built into the kernel.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
I just built an aac raid array. I partitioned the disk, set the partition as
active, and copied all my files to it with tar. I changed fstab on the new
drive to reflect the changes. When I try to boot to the array, it says invalid
partition. I've tried typing everything I could as the partition
I've been having a problem for a long time trying to
compile the shared-mime-info port. Below is the error
I'm getting. I have tried recompiling libxml2 and
everything shared-mime-info depends on.
gmake[1]: Entering directory
`/usr/ports/misc/shared-mime-info/work/shared-mime-info-0.22'
cc -DHAVE_
Various ports that depend on Perl are coming up with
the error in the subject when I try to upgrade them.
I've tried a portupgrade -fR [package] and even
portupgrade -fRra and it's not fixing the undefined
reference. I've cvsupped several times, including the
base system. I don't see anything relat
--- Warren Block <[EMAIL PROTECTED]> wrote:
> Maybe it's in the wrong place. There's a port for
> XML::Parser:
>
> /usr/ports/textproc/p5-XML-Parser
>
> Install that and see if it solves the problem.
>
> -Warren Block * Rapid City, South Dakota USA
I looked for such a port and couldn't find o
--- Craig Russell <[EMAIL PROTECTED]> wrote:
> Try running "perl -MCPAN -e shell" as root.
>
> That should take you to a cpan> prompt from there
> type
> "install XML::Parser"
>
> If that completes succesfully hit exit and try to
> install what you were looking for.
>
> Hope this helps
>
> Cra
Ahoy. Every time I try to upgrade a program that
depends on Perl, I get this error:
checking for XML::Parser... configure: error:
XML::Parser perl module is required for intltool
I've tried a portupgrade -fRra to no avail. I'm not
sure if I'm missing a package (pkgdb -F doesn't show
anything) or
--- Lowell Gilbert
<[EMAIL PROTECTED]> wrote:
> I'd guess there's more than one thing going on, so
> try to
> eliminate some variables. In particular, use a
> command-line
> utility to generate audio. Also, watch for log
> messages,
> and for changes in the output of /dev/sndstat.
I should have
I was upgrading something in my ports tree (I can't
remember what now) when this problem arised. Any time
I try to play anything with audio, the player will
just freeze. It's not locked up, because I can stop
it. In XMMS for instance, I just hit the stop button.
But while it's playing, the time doe
> This comes with OPTIONAL SCSI interface, u sure you
got the
> board with the SCSI option ?
Well it has two SCSI ports on the motherboard, has an
option to enable/disable it in the CMOS, and was
advertised as having a SCSI Ultra 360 controller. If
it doesn't, I want my money back.
http://www.ne
> What is your motherboard model ? if this is a
> pre-made server what is the make and model ?
Tyan S2895 Thunder K8WE
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
ck to me for several days. I dread the thought
that I may have to send the board back, but it's not
looking good. If you guys come up with any other ideas
in the meantime, let me know. Thanks.
--- Rod Person <[EMAIL PROTECTED]> wrote:
> On Saturday 04 March 2006 10:49 am, David L
- Rod Person <[EMAIL PROTECTED]> wrote:
> On Friday 03 March 2006 9:58 pm, David LeCount
> wrote:
> > I recently purchased a Tyan S2895 motherboard and
> more
> > recently a Hitachi SCSI drive. I'm trying like
> hell to
>
> I just got my new workstation 2 d
I recently purchased a Tyan S2895 motherboard and more
recently a Hitachi SCSI drive. I'm trying like hell to
install FreeBSD 6.1 on it but the drive isn't
recognized. Even on my current installation on IDE
drives, there's nothing in dmesg about SCSI at all. I
read about someone doing benchmarks wi
Okay, I've almost got this sound issue figured out. I
am able to get my volume back by unloading and
reloading snd_ich. However, any time I restart X,
there is no volume again. I can't figure out what in
the hell X has to do with my sound driver. It occured
to be that artsd might have something to
> Check your line-out jumpers. Most new motherboards
> come with the option of
> front panel sound, in which case the sound loops
> through the front panel
> connector. If you're not using front panel sound you
> probably need jumpers on
> the motherboard. Your manual should tell you about
> thi
I just got a new motherboard (Tyan S2895) with a
soundcard built in. I really don't have any choice at
the time but to use that soundcard since there isn't a
free PCI slot for my old one. The card is detected by
the module snd_ich and I can play music and adjust the
mixer with no errors, but there
I give in. I've been working for hours on this without
resolution. I just bought a wireless router and I'm
trying to get wep working. I'm pretty sure it's
working on the router side. I'm having trouble setting
the key in FreeBSD. The man page says to use wepkey to
set it, but that's been giving err
I finally got this issue resolved. I ran the exact
xmlcatmgr command it failed on, except I replaced add
with remove. That removed the entry from the database
that it was complaining about. Unfortunately I
destroyed another database figuring it out, but I'm
just going to have to recompile everythin
Ahoy. I've had this old ATI Rage II video card for
months and haven't been able to get the tv-out on it
to work. I have found no documentation on the internet
and only two or three examples of xorg.conf files,
none of which have worked. I'm turning to you guys.
Let me show you what I currently have
--- Lowell Gilbert
<[EMAIL PROTECTED]> wrote:
> David LeCount <[EMAIL PROTECTED]> writes:
>
> > When trying to portupgrade -f sdocbook-xml, it
> fails
> > with the following error:
> >
> > xmlcatmgr: entry already exists for
> > `/usr/lo
When trying to portupgrade -f sdocbook-xml, it fails
with the following error:
xmlcatmgr: entry already exists for
`/usr/local/share/xml/sdocbook/4.1.2.5/catalog' of
type `CATALOG'
When I do a pkg_info | grep sdocbook, nothing shows
up. I've searched and haven't been able to find this
error anywh
--- Björn König <[EMAIL PROTECTED]> wrote:
> You don't need to show me your bsd.compat.mk, but
> look at
> /etc/make.conf. Do you have defined NOPROFILE there?
>
> Björn
I didn't read this message before sending my last one.
Yes, I had NOPROFILE in make.conf. I just changed it
to NO_PROFILE and
--- Björn König <[EMAIL PROTECTED]> wrote:
> It seems like that there is a problem with
> /usr/share/mk/bsd.compat.mk.
> The correct output would be
>
> > portupgrade-20041226_5
> >
> >
>
> only. Can you show me your bsd.compat.mk?
>
> Björn
>
# $FreeBSD: src/share/mk/bsd.compat.mk,v 1.20
A few days ago, I cvsupped to RELENG_6 and compiled
and installed everything just fine. After I finished
with that, I cvsupped my ports and tried to do a
portupgrade, but for every single port, it says,
"Makefile possibly broken." I cvsupped src again the
next day thinking there may have been a bug
--- wizlayer <[EMAIL PROTECTED]> wrote:
> On Monday 04 July 2005 11:07 pm, you wrote:
> > --- wizlayer <[EMAIL PROTECTED]> wrote:
> > > What errors?
> >
> > -su-2.05b# ifconfig tun0 destroy
> > ifconfig: SIOCIFDESTROY: Invalid argument
> > -su-2.05b# ifconfig tun0 deletetunnel
> > ifconfig: SIOCDI
I've been trying to get IPv6 to work using the tsp
client. It only works once per boot because I can't
get tun0 to clear. I've tried "ifconfig tun0 destroy"
and "ifconfig tun0 deletetunnel", both of which give
errors. The only way I can clear it is to run ppp,
which is very annoying. I appreciate a
Ahoy. For a while now (several years in fact), my
virecover and sendmail startup scripts will hang while
booting. I'm forced to hit ctrl c to continue the
bootup. Then I can run the scripts afterwards from a
terminal and they work fine. I've looked into the
problem a few times, but found nothing. A
I connect to the IPv6 Internet through Freenet6, whose
program is tspc. It's supposed to set up my interfaces
and everything so I can use ipv6-over-udp. It works
the first time after rebooting my computer, but if I
have an IP change or something to that effect, it
won't work when I run it again. I'
Alright, I'm a step forward in getting this 486
upgraded from 5.0 to 5.3 but things aren't getting any
easier. For those that don't remember, I've been
trying to build a kernel and world on my Pentium 4 and
install it on a 486 but make was calling a bad system
call while installing the new kernel.
If you're meaning the make in /usr/obj, yes I can
understand that one not working. However, it does not
explain why the one already installed crashes. That is
the old one which came with 5.0-RELEASE.
--- Kris Kennaway <[EMAIL PROTECTED]> wrote:
> On Tue, Dec 21, 2004 at 03:03:37P
I just installed FreeBSD 5.0 from cd on a 486 and I'm
trying to update it to 5.3 which is on my better
computer. Following the handbook, I used NFS to mount
/usr/src and /usr/obj from the new machine to the old
one. Then I made buildworld and buildkernel on the new
machine with no problems. Then I
__
Do you Yahoo!?
The all-new My Yahoo! - Get yours free!
http://my.yahoo.com
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsub
Ahoy. I'm trying to install FreeBSD on a 486 to use as
a router. The BIOS has a 2 gig limitation for hard
drive, which is apparent because it automatically
detects my 13 gig drive as a 2 gig. So after
installing the base system and rebooting, it says it
cannot find the kernel. I know what you're pr
I have what is proving to be a difficult challenge. My
friend wants to start using FreeBSD. Unfortunately the
latest disc I have is 4.3, and I don't have easy
access to broadband, so obtaining a newer iso is
unlikely in the near future. Well I've been gradually
upgrading mine and it's currently usi
Hello. I'm swapping my second hard drive for a larger
one. This is the drive with my / partition on it. Well
I've made the partitions on the other drive and copied
my data. I made the partition active, though every
time I return to fdisk in sysinstall, it doesn't show
it as active anymore. Lastly,
I have what is proving to be a difficult challenge. My
friend wants to start using FreeBSD. Unfortunately the
latest disc I have is 4.3, and I don't have easy
access to broadband, so obtaining a newer iso is
unlikely in the near future. Well I've been gradually
upgrading mine and it's currently usi
41 matches
Mail list logo
