On 17/05/2010 19:10, Jean-Paul Natola wrote:
>> Did you configure Xorg to use the intel driver?
>> Check the handbook chapter 5.4 especially 5.4.3.1 Configuration with
>> Intel(r) i810 Graphics Chipsets.
>>
> I have got it configured, now I'm a bit confused on which "display" section
> I'm s
Sometime between FreeBSD 7.2-RELEASE-p4 and 8.0-RELEASE write
performance of gbde encrypted devices seems to have dropped
significantly. A system I have running 7.2 seems to run gbde drives
at or near the drive max rate (30-40MB/s) while I am seeing less than
10% of that on 8.0 systems.
I get the
Steve Bertrand wrote:
I want to find a file that was recently created.
The content within the file is known, so I can grep for that. The
directory structure that contains the file is also known. The filename
is not known.
What command string do I use to search a directory structure for a file,
On 2010.05.17 22:17, Randal L. Schwartz wrote:
>> "Steve" == Steve Bertrand writes:
>
> Steve> What command string do I use to search a directory structure for a
> file,
> Steve> when my search pattern only matches content and not filename?
>
> grep -r 'pattern here' top-level-dir-here
Som
> "Steve" == Steve Bertrand writes:
Steve> What command string do I use to search a directory structure for a file,
Steve> when my search pattern only matches content and not filename?
grep -r 'pattern here' top-level-dir-here
--
Randal L. Schwartz - Stonehenge Consulting Services, Inc. -
I want to find a file that was recently created.
The content within the file is known, so I can grep for that. The
directory structure that contains the file is also known. The filename
is not known.
What command string do I use to search a directory structure for a file,
when my search pattern o
On 2010.05.17 20:40, Steve Bertrand wrote:
> I'm cleaning up my office, and I've come across a piece of hardware that
> has been successfully hacked with FBSD as a FW/GW in the past.
I also have (found) two Cisco Catalyst 2924 switches that I will get rid
of too.
...and I'm not done yet. Preferab
On 2010.05.17 20:40, Steve Bertrand wrote:
> The unit is a Multi-Tech RF600VPN device, and it contains three 100Mbps
> interfaces.
>
> I'd like to give this away.
fwiw...
I am an hour east of Toronto, Ontario.
...Canada.
-sb
___
freebsd-questions@fr
I'm cleaning up my office, and I've come across a piece of hardware that
has been successfully hacked with FBSD as a FW/GW in the past.
The last time the hardware ran, it was from a 2GB CF card, but it also
has a fully capable IDE channel that does work (that's how I installed
FBSD onto the CF car
I'm using the default adapter, that's the intel desktop one I think.
Establishing the connection with DHCP is indeed a bit inconsistent.
Sometimes it's there just after boot, sometimes it scans for half a minute
before making the connection. No problems with DNS. So far I tested browsing
and softwa
Platform: HP 350DL
FreeBSD version: FreeBSD 8.0 (amd64)
Beginning of /var/run/dmesg.boot
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a r
Hello
What is the correct way to make such an update? I installed KDE 4.3.5 by useing
the meta port. The following I have installed:
konadi-1.2.1_2 Storage server for kdepim
de-kde-l10n-4.3.5_1 German messages and documentation for KDE4
kde4-4.3.5_1 The "meta-port" for KDE
kde4-icon
On Mon, May 17, 2010 at 06:37:49PM +0200, SmartTech Sales wrote:
> Thanks Jerry
>
> I had a reply that I should rather use 8.0 and there I can only download
> disk1, the rest I can get from the ports collection. (I'm not sure that I
> can download all 2GB of the DVD successfully, our bandwidth i
o be the view of
SmartTech (Spencer Allen Technologies cc).
__ Information from ESET Smart Security, version of virus
signature database 5121 (20100517) __
The message was checked by ESET S
>Did you configure Xorg to use the intel driver?
>Check the handbook chapter 5.4 especially 5.4.3.1 Configuration with
>Intel(r) i810 Graphics Chipsets.
I have got it configured, now I'm a bit confused on which "display" section
I'm supposed to add the "mode" there are many do I add the 10.24x7
Today's port upgrade for xmobar broke my .xmobarrc. It no longer accepts
commands whose arguments contain escaped quotes. I was able to work
around it by changing the command I was spawning to not require quotes,
but where should I report this issue?
--
Sterling (Chip) Camden | camdensoftware.c
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 17/05/2010 16:00:29, Karen Bester wrote:
> I'm not sure if I will be able to download 2GB successfully, I prefer
> getting the separate ISO's. I only see disk1 for 8.0, where are the rest?
Disc1 is all you need to install the OS. The other disk im
llen Technologies cc).
>
>
>
> __ Information from ESET Smart Security, version of virus signature
> database 5121 (20100517) __
>
> The message was checked by ESET Smart Security.
Ondrej Majerech wrote:
Anselm Strauss wrote:
I switched to NAT networking for now. It doesn't require any modules
to load
besides the vboxdrv.ko and runs stable so far. Only strange that ICMP
is not
working ...
NAT networking doesn't work for me. Which Adapter Type are you using?
And did y
Anselm Strauss wrote:
I switched to NAT networking for now. It doesn't require any modules to load
besides the vboxdrv.ko and runs stable so far. Only strange that ICMP is not
working ...
NAT networking doesn't work for me. Which Adapter Type are you using?
And did you have to do any further
I switched to NAT networking for now. It doesn't require any modules to load
besides the vboxdrv.ko and runs stable so far. Only strange that ICMP is not
working ...
On Tue, May 11, 2010 at 10:16 PM, Anselm Strauss wrote:
> Okay, so it works with the stock kernel when I don't load the module and
ed on manual installations and such -
good to have available in case of emergencies, but not really
necessary.
-Reko
PS. And as Frank said in another reply, I'd consider 8.0 instead
__ Information from ESET Smart Security, version of virus signature
database 5121 (20100517) __
Hi, I wish to download FreeBSD but I am unsure which option to
choose.
03/21/2010 02:08PM 40,554,496
FreeBSD-7.3-RELEASE-i386-bootonly.iso
This is a good option, if the machine is connected into internet and
downloading the base system and ports is okay for you.
03/21/2010 02:09PM
).
__ Information from ESET Smart Security, version of virus signature
database 5121 (20100517) __
The message was checked by ESET Smart Security.
http://www.eset.com
from ESET Smart Security, version of virus signature
database 5121 (20100517) __
The message was checked by ESET Smart Security.
http://www.eset.com
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
Sorry for the necro post..
but the source on mount_smbfs definitely has kerberos options..
http://www.opensource.apple.com/source/smb/smb-431.2/mount_smbfs/mount_smbfs.c
>> mount_smbfs on OSX seems to have Kerberos support, does mount_smbfs on
>> FreeBSD support Kerberos?
>No, but if it's in D
On Mon, May 17, 2010 at 3:31 AM, Ruben de Groot wrote:
> On Tue, May 11, 2010 at 06:43:09AM -0500, Andrew Gould typed:
>>
>> Another item to consider in this discussion is sharity-light, an
>> easy-to-use program that allows FreeBSD to mount Windows shares.
>> Sharity-light is in the ports and Sha
On 17/05/2010 15:40, Jean-Paul Natola wrote:
> On 14/05/2010 21:56, Jean-Paul Natola wrote:
>
>> Hi all,
>>
>> I installed Xorg and xfce when I start it (/usr/local/bin/startxfce) my
>> screen just shows vertical lines of many different colors on the screen,
>>
>> The monitor (fairly old gatew
On 14/05/2010 21:56, Jean-Paul Natola wrote:
> Hi all,
>
> I installed Xorg and xfce when I start it (/usr/local/bin/startxfce) my
> screen just shows vertical lines of many different colors on the screen,
>
> The monitor (fairly old gateway 15" lcd) works fine in regular text mode,
> on wind
On Mon, May 17, 2010 at 11:59:20AM +0300, Anas Matar wrote:
> Dear Sir,
>
>
>
> Can I use your great product FreeBSD as a proxy to translate POP3
> requests to POP3s?
>
> My problem is simply that I have a software which does not support other
> than POP3 connections for mail servers , and im
Dear Sir,
Can I use your great product FreeBSD as a proxy to translate POP3
requests to POP3s?
My problem is simply that I have a software which does not support other
than POP3 connections for mail servers , and im in need to connect to
POP3s mail servers.
SO I want a software in the m
Dzienki Maciej :-)
2010/5/17 Maciej Milewski :
> Dnia poniedziałek, 17 maja 2010 o 10:06:05 Dimitar Vassilev napisał(a):
>> Hello,
>> Could someone advise how one should create 1 unused partition for
>> upgrading nanobsd in myconf.nano? What variables should I put into the
>> config file to have a
Craig Whipp wrote:
On Mon, May 10, 2010 10:53 am, Nikos Vassiliadis wrote:
Ansar Mohammed wrote:
Hello All,
I have a FreeBSD VM running. Whenever I reboot the VM without a clean
shutdown it boots into single user mode and I have to run fsck.
When I run fsck, the file system clearly has issues.
Dnia poniedziałek, 17 maja 2010 o 10:06:05 Dimitar Vassilev napisał(a):
> Hello,
> Could someone advise how one should create 1 unused partition for
> upgrading nanobsd in myconf.nano? What variables should I put into the
> config file to have a such?
# Number of code images on media (1 or 2)
NANO_
On Tue, May 11, 2010 at 06:43:09AM -0500, Andrew Gould typed:
>
> Another item to consider in this discussion is sharity-light, an
> easy-to-use program that allows FreeBSD to mount Windows shares.
> Sharity-light is in the ports and Sharity is available as a
> commercial product:
What's the adv
Hello,
Could someone advise how one should create 1 unused partition for
upgrading nanobsd in myconf.nano? What variables should I put into the
config file to have a such?
How big it should be for 4GB card?
Also what is the filesystem referred by NANO_DATASIZE variable?
Thanks in advance!
Dimitar
On 14/05/2010 21:56, Jean-Paul Natola wrote:
> Hi all,
>
> I installed Xorg and xfce when I start it (/usr/local/bin/startxfce) my
> screen just shows vertical lines of many different colors on the screen,
>
> The monitor (fairly old gateway 15" lcd) works fine in regular text mode,
> on windo
Hi,
I'd just like to know if the Intel DG45FC Fly Creek LGA 775 Mini-ITX
system board is compatible with FreeBSD and also if there is a PCIe SATA
card recommendation too as I need more SATA ports??
I plan on building a Mini-ITX based NAS/Server using a Chenbro hot-swap
chassis with FreeBSD 8
38 matches
Mail list logo
