Hello,
I compile today kernel and obtain the following error. I something missing in
my kernel file MYKER or is error in file tdfx_linux.c or tdfx_linux.h (see
below for more):
/usr/src/sys/modules/3dfx_linux/../../dev/tdfx/tdfx_linux.c
In file included from @/dev/tdfx/tdfx_linux.h:36,
when i set in BIOS my parallel port (it's IBM thinkpad T23 if it matters)
to standard paraller port it is detected fine
ppc0: port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: on ppc0
lpt0: on ppbus0
lpt0: Interrupt-driven port
when it's changed
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Nikola Lecic wrote:
> C) port it!
>
> is the best. :) Seriously, if you really have a long term need for
> Net::LDAP module, then porting would be the most convenient for you and
> for others.
It's already been done. I don't know why the port is
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Kurt Buff wrote:
> I'm trying to implement a script that I found, and it's referencing
> Net::LDAP, Net::LDAP::Control::Paged and Net::LDAP::Constant
>
> I'm not finding p5-net-ldap in ports, though I do see
> p5-ResourcePool-Resource-Net-LDAP and p
What is device with designation md0?
memory disk.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hello,
We are planning to use TACACS+ for user authentication of an application serve.
The pictorial description of our requirement is shown below:
Server 1
With go global server, PAM and TACACS+
Application server
[cid:image013.gif@01C7EAEC.68F81A20][cid:[EMAIL PROTECTED]
NW
NW
[cid:ima
On 2007-08-30 02:14, brad davison <[EMAIL PROTECTED]> wrote:
>>> After installing the cyrus-sasl2-saslauthd port, I am now unable to
>>> rebuild sendmail and/or The World.
>>
>> You need the security/cyrus-sasl2 port, not sasl2-saslauthd.
>
> I have the cyrus-sasl2 as well as cyrus-sasl2-saslauthd
> What is device with designation md0?
md is memory disk
Olivier
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hello again:
What is device with designation md0?
I am trying to boot from install 6.2 cd in cd boxed set
on MSI model# RX480 Neo2 motherboard/ AMD64 processor
Right after an entry in the boot sequence referring to this
The kernel panics with vm_fault on no fault entry (and an address).
This pani
L Goodwin wrote:
> This is what I was hoping for. Thanks all!
Well, even though this is a FreeBSD list and not a Microsoft list, was
the problem resolved? What fixed it?
> BTW, I did my second successful FreeBSD installation
> this week on a server that I could not get it to run
> on for the long
On Wed, 29 Aug 2007 16:22:39 -0700
"Kurt Buff" <[EMAIL PROTECTED]> wrote:
> I'm trying to implement a script that I found, and it's referencing
> Net::LDAP, Net::LDAP::Control::Paged and Net::LDAP::Constant
>
> I'm not finding p5-net-ldap in ports, though I do see
> p5-ResourcePool-Resource-Net-L
This is what I was hoping for. Thanks all!
BTW, I did my second successful FreeBSD installation
this week on a server that I could not get it to run
on for the longest time. :-)
--- Garrett Cooper <[EMAIL PROTECTED]> wrote:
> Steve Bertrand wrote:
> >> What is the "correct" procedure for recover
'kay. Thanks, J.
--- Jonathan Horne <[EMAIL PROTECTED]> wrote:
> On Wednesday 29 August 2007 19:40:09 L Goodwin
> wrote:
> > I apologize for asking this question, but people
> who
> > know UNIX often know a lot about operating systems
> in
> > general.
> >
> > I have a client with a Windows 2000
Steve Bertrand wrote:
What is the "correct" procedure for recovering from
this mishap? TIA! :-)
- download FreeBSD disk-1 from freebsd.org
- insert CD into drive, and install :)
Seriously..
It's been a while since I've actually managed a Windows network per-se,
but from what I recall, yo
Hello,
My company runs an web-application of our own on a standalone FreeBSD server.
The app is for our own use, here are some of the characteristics:
- Not RAID
- Does Backups :P
Now, our app uses MySQL Because of the possibility to extend, if necessary to
Mysql-Cluster
as we want to provide t
Scott I. Remick wrote:
Predrag Punosevac wrote:
Why don't you mount your cd as
su -
password
mount-t cd9660 /dev/acd0 /mnt
You should see you disk mounted and songs like files that you can
transfer to hard disk. Of course you
can convert them latter to some format you like best.
# mount -t
> What is the "correct" procedure for recovering from
> this mishap? TIA! :-)
- download FreeBSD disk-1 from freebsd.org
- insert CD into drive, and install :)
Seriously..
It's been a while since I've actually managed a Windows network per-se,
but from what I recall, you can change the workgroup
I wanted to make sure my sources were up to date, so here is a snip from my
'script'
> Hello.
> I am a new FreeBSD user (almost converted from Linux). My company is
> switching over mail servers from an (expensive and old) Red Hat server
> to FreeBSD 6.2.
Yippie! Welcome to the FreeBSD si
On Wednesday 29 August 2007 19:40:09 L Goodwin wrote:
> I apologize for asking this question, but people who
> know UNIX often know a lot about operating systems in
> general.
>
> I have a client with a Windows 2000 Pro SP4 host. He
> cycled power without shutting down Windows, and now
> the Window
David, you can also run it on a single line by piping it into sh:
/bin/sh | command here
However, feel free to put it in a file. Somethings as simple as this
I like to make one-liners so they're easy to read in the crontab entry.
Glad I could help!
Eric
On Aug 29, 2007, at 3:16 PMAug 29,
I apologize for asking this question, but people who
know UNIX often know a lot about operating systems in
general.
I have a client with a Windows 2000 Pro SP4 host. He
cycled power without shutting down Windows, and now
the Windows network (Network Neighborhood) is hosed.
When he tries to access
Hi list,
If I plug in my Secure Digital reader with the card from kamera, it is
detected very fine and I can mount using -t msdosfs on /mnt/da0s1.
But I have a little problem when trying to attach my Sony Ericcson
W810 mobile phone to FreeBSD 6.2. See what I get:
umass0: Sony Ericsson Sony Erics
Thanks - I moved the contents of /var/db/pkgdb to ~/pkg/, and then
tried to build one of the packages. That gave me a different error,
and a useful one. I went and ran portdb (not to be mistaken for
pkgdb), in download-index mode. I copied the ~/pkg/ back to
/var/db/pkgdb/, and the problem was fixe
On Wednesday 29 August 2007 19:19:58 Peter Pluta wrote:
> How does one pick a domain?
> Just any old domain?
thats often how it goes! mine was originally "dfwlanparty"... but dfwlp just
became the shortend version of what the community referred to it as. i
bought the domain just out of conven
Jonathan Horne wrote:
>
> On Wednesday 29 August 2007 19:05:06 Peter Pluta wrote:
>> I have a box with 5 ip's pointing to it. Most of the things I run (http,
>> smtp) are virtual or allow me to specify the hostname (postfix) - so I'm
>> wondering what the machines hostname should be? By default
On Wednesday 29 August 2007 19:05:06 Peter Pluta wrote:
> I have a box with 5 ip's pointing to it. Most of the things I run (http,
> smtp) are virtual or allow me to specify the hostname (postfix) - so I'm
> wondering what the machines hostname should be? By default it's
> localhost.localdomain. Th
At 07:05 PM 8/29/2007, Peter Pluta wrote:
I have a box with 5 ip's pointing to it. Most of the things I run (http,
smtp) are virtual or allow me to specify the hostname (postfix) - so I'm
wondering what the machines hostname should be? By default it's
localhost.localdomain. This has always confu
I have a box with 5 ip's pointing to it. Most of the things I run (http,
smtp) are virtual or allow me to specify the hostname (postfix) - so I'm
wondering what the machines hostname should be? By default it's
localhost.localdomain. This has always confused me from the begining when I
first starte
I'm trying to implement a script that I found, and it's referencing
Net::LDAP, Net::LDAP::Control::Paged and Net::LDAP::Constant
I'm not finding p5-net-ldap in ports, though I do see
p5-ResourcePool-Resource-Net-LDAP and p5-perl-ldap.
Can I:
A) leave the script as-is, and simply install one or t
I did some digging... I too had bought the machine built by an integrator...
They however used DDR2 RAM that is 2.0V where as the motherboard spec calls
for 1.8V DDR2. I'm betting that is what my problem is, so I ordered some
DDR2 that was listed on the compatibility list from the MB mfctr. I'm hop
On 2007-08-29 18:02, brad davison <[EMAIL PROTECTED]> wrote:
> Hello.
> I am a new FreeBSD user (almost converted from Linux). My company is
> switching over mail servers from an (expensive and old) Red Hat server
> to FreeBSD 6.2.
Yippie! Welcome to the FreeBSD side of the world :-) :-)
> I ha
Ok,
That thing with mount is my stupidity (you are not trying to mount file
system) people already commented on it. I looked again the book and in
Chapter 18, section 18.6 first page they talk about ripping music
(Duplicating CD) from the command line right after they talk about about
burncd a
On 2007-08-29 14:18, Eric Crist <[EMAIL PROTECTED]> wrote:
>On Aug 29, 2007, at 1:54 PMAug 29, 2007, Giorgos Keramidas wrote:
>> On 2007-08-29 18:51, Wojciech Puchar <[EMAIL PROTECTED]>
>> wrote:
>>> fragment from my test program (used for other thing but doesn't matter)
>>>
>>> /sbin/ping -i 0.5 -
Predrag Punosevac wrote:
Why don't you mount your cd as
su -
password
mount-t cd9660 /dev/acd0 /mnt
You should see you disk mounted and songs like files that you can
transfer to hard disk. Of course you
can convert them latter to some format you like best.
# mount -t cd9660 /dev/acd0 /mnt
m
Hi all,
on newer Dell hardware, like the 1955, the nic's are not enumerated
right.
Physical port 1 becomes em0, and physical port 2 becomes em0.
On systems with 4 nics stuff even becomes more confusing.
I found some solutions for Linux (see http://linux.dell.com/files/
whitepapers/nic-enum-w
Eric
You are of course correct, it runs under "sh"
I think that means I have to run it in a separate script file
I write it as (First_Hop subs with a.b.c.1)
#!/bin/sh
if ! ping -c1 First_Hop >/dev/null 2>/dev/null
then
echo First_Hop_OK
else
ifconfig em0 down && ifconfig
On Aug 29, 2007, at 12:22 PM, "B. Cook"
<[EMAIL PROTECTED]> wrote:
Hello all,
I saw this the other day.. and it happened while we were moving
computers around while they were powered on..
(da0:ahc0:0:0:0): WRITE(10). CDB: 2a 0 1 81 a1 3f 0 0 20 0
(da0:ahc0:0:0:0): CAM Status: SCSI Sta
Hello all,
I saw this the other day.. and it happened while we were moving
computers around while they were powered on..
(da0:ahc0:0:0:0): WRITE(10). CDB: 2a 0 1 81 a1 3f 0 0 20 0
(da0:ahc0:0:0:0): CAM Status: SCSI Status Error
(da0:ahc0:0:0:0): SCSI Status: Check Condition
(da0:ahc0:0:0:0): D
On Wed, 29 Aug 2007 12:10:00 -0700
Predrag Punosevac <[EMAIL PROTECTED]> wrote:
[...]
> never use with option -a (all)
Why?
[...]
> Recently I upgraded one library by using make deinstall && make
> reinstall (I guess this is little bit stupid because of the
> dependence issues but it could work
I've since updated my ports tree again with the same error, so even
though portupgrade says " ! lang/php5 (php5-5.2.3_1) (Makefile
broken)" I think it's more likely that something else is wrong.
Are there other things I might try? The DSO apache docs seem to be
based on someone compili
David,
The script I provided assumes the sh shell. Most shell scripts have
been historically written for the bourne shell. Before running the
script I sent you, try typing sh at the command line. Then,
run the line I sent your way.
Let me know how it works for you!
Eric
On Aug 29, 2
On Aug 29, 2007, at 1:54 PMAug 29, 2007, Giorgos Keramidas wrote:
On 2007-08-29 18:51, Wojciech Puchar
<[EMAIL PROTECTED]> wrote:
fragment from my test program (used for other thing but doesn't
matter)
/sbin/ping -i 0.5 -s 1450 -c 3 tested_host >/dev/null 2>/dev/null
if [ $? != 0 ];then
p
Hi Eric
Thank you for that, I think I see one thing I was doing wrong (putting the ping
into the if!)
Running your code in the command window I get (Following the successful ping)
TESTV=0: Command not found.
TESTV: Undefined variable.
As you can tell I am learning this syntax!
Can you help me
Quoting Gert Lynge:
>
> Using HTTP accept filters by any chance?
In the rare occassion I actually remember to enable it, yes. I have to
load it by doing `kldload http_accf` (I don't have it loading at boot.)
My server's specifics:
FreeBSD 6.2-RELEASE
Apache/2.2.4 (FreeBSD)
mod_ssl/2.2.4
Op
On Wed, Aug 29, 2007 at 07:00:42PM +, brad davison wrote:
> Yuri, thank you for your reply.
>
> my make.conf:
> # SASL (cyrus-sasl v2) sendmail build flags...
> SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
> SENDMAIL_LDFLAGS=-L/usr/local/lib
> SENDMAIL_LDADD=-lsasl2
> # Adding to enable altern
I am happy it worked out. My guess is that you still didn't alter
properly files as rc.conf, devfs.conf and fstab and that is way your Gnome
is not fully working. My Gnome is 100% working.
I use portsnap fatch && portsnap extract && portsnap updated to refresh
the port three.
I have used in the
Yuri, thank you for your reply.
my make.conf:
# SASL (cyrus-sasl v2) sendmail build flags...
SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
SENDMAIL_LDFLAGS=-L/usr/local/lib
SENDMAIL_LDADD=-lsasl2
# Adding to enable alternate port (smtps) for sendmail...
SENDMAIL_CFLAGS+= -D_FFR_SMTP_SSL
# added b
Yes I do have mike connected (not muted) and permission files altered. I
read 120 pages of OSS documentation and I tried every bloody thing. I
will try one more time. Maybe I missed something. Thanks for your output.
Can you use VoIP? What is your sound card?
Thanks
Predrag
Norberto Meijome w
Hi, Predrag!
Thank you for responding to my question. I installed 6.2 Release, but
did a minimum installation so I did not install Xorg from the release
(I think). I then installed Xorg-7.2 from the ports collection. I
took your advice and used the "make BATCH=yes install clean" com
On 2007-08-29 18:51, Wojciech Puchar <[EMAIL PROTECTED]> wrote:
> fragment from my test program (used for other thing but doesn't matter)
>
> /sbin/ping -i 0.5 -s 1450 -c 3 tested_host >/dev/null 2>/dev/null
> if [ $? != 0 ];then
> perform_action_if_doesnt_ping
> fi
I'm not sure if '!=' is a 'po
You are right!
However the first page of the chapter 18 from the handbook (which I
asked him to read first) does explain how to rip the Audio cd
from the command line.
My hunch was that everything is ok with his DVD rom and that the problem
is some configuration file.
Somebody also made a poin
On Wed, Aug 29, 2007 at 05:04:20AM +0200, Nikola Lecic wrote:
> On Mon, 27 Aug 2007 23:30:48 -0700
> Gary Kline <[EMAIL PROTECTED]> wrote:
>
> > Does anybody know howto set my env to iso.8859-1 (Latin1)
> > so that, say [Alt]-i will produce an e-aigu? I think that's
> > e-acute. I ha
On Aug 29, 2007, at 11:02 AM, brad davison wrote:
I have gotten nearly everything configured and running smoothly
except for SMTP AUTH.
Before I tried to build in the SASL2 stuff, I had done a full src-
all update via cvsup, and at that time, I was able to rebuild
sendmail, and rebuild the
On Wed, Aug 29, 2007 at 06:02:01PM +, brad davison wrote:
> Hello.
>
> I am a new FreeBSD user (almost converted from Linux). My company is
> switching over mail servers from an (expensive and old) Red Hat server to
> FreeBSD 6.2.
>
> I have gotten nearly everything configured and running sm
Hello.
I am a new FreeBSD user (almost converted from Linux). My company is
switching over mail servers from an (expensive and old) Red Hat server to
FreeBSD 6.2.
I have gotten nearly everything configured and running smoothly except for
SMTP AUTH.
Before I tried to build in the SASL2 stu
On Aug 29, 2007, at 10:56 AM, Wojciech Puchar wrote:
anyone here know a SMALL named and dhcpd servers?
small i mean no more than say 200kB both (just binaries). the
dumbest dhcpd would be enough (automatic assignment to all machines
on given interfaces), named just to keep single domain and
anyone here know a SMALL named and dhcpd servers?
small i mean no more than say 200kB both (just binaries). the dumbest
dhcpd would be enough (automatic assignment to all machines on given
interfaces), named just to keep single domain and forward everything else
to master.
thank you for help
That sounds like a good command to use, but don't I have to use the -L switch
hence the filesystem is live? What about the restore method the same notation
would apply, right? Have you use this methodology yourself or would you
recomend using another method?
Date: Wed, 29 Aug 2007 15:36:41 +0
We tried that, 2 different PS's and no change, so I don't think that is what
it is.
I'm thinking its either a BIOS issue, or _maybe_ memory. There may be 1 bad
cell somewhere in RAM that gets randomly hit and causes a reset. I'm going
to try upgrading the BIOS, and then if that doesn't work, put
That is interesting, we are using filters. What version ot Apache are you
running?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gert Lynge
Sent: Wednesday, August 29, 2007 2:16 AM
To: freebsd-questions@freebsd.org
Subject: RE: Server rebooting itself
Garrett Cooper wrote:
The big assumption is that the CD that you're ripping from doesn't
have copyright protection on it. That kind of a CD will show that
particular set of behavior in FreeBSD.
I'm pretty sure I'm safe... the CD I'm testing with at the moment is
from 1990. :) It happene
fragment from my test program (used for other thing but doesn't matter)
/sbin/ping -i 0.5 -s 1450 -c 3 tested_host >/dev/null 2>/dev/null
if [ $? != 0 ];then
perform_action_if_doesnt_ping
fi
___
freebsd-questions@freebsd.org mailing list
http://list
Has anyone successfully burnt double layer DVDs in FreeBSD.
yes
I have some home videos which were burnt on a large size dvd -- there is no
encryption on them.. its just straight vob files.
any ideas will be appreciated. I've had no luck with mkisofs or other tools
that i've tried.
so ple
Hi,
Has anyone successfully burnt double layer DVDs in FreeBSD.
I have some home videos which were burnt on a large size dvd -- there is no
encryption on them.. its just straight vob files.
any ideas will be appreciated. I've had no luck with mkisofs or other tools
that i've tried.
Regards
Rohi
On 2007-08-30 01:03, Hinkie <[EMAIL PROTECTED]> wrote:
> Hi
>
> I want to run a cron job in /etc/crontab that runs (ifconfig em0 down;
> ifconfig em0 up) if my cables static ip gateway can't be pinged but I
> can't figure it out. I can't get the syntax that runs in the command
> window, to then pu
On Tue, Mar 13, 2007 at 10:44:58AM +0100, Thomas Vogt wrote:
> FreeBSD (6.2 and Current) boots and works perfectly. Only the storage
> control program from port/sysutils/aaccli doesn't work with this
> controller.
>
> aaccli open aac0:
> Command Error: current controller software.>
Adaptec has
Hi all,
I am attempting to create a bonded multilink connection with two ADSL
links to my upstream using FreeBSD.
Based on info I have read, I want/need to use mpd, however, I have not
found a definitive answer on whether mpd will actually act as a true
bonded connection as opposed to a load-bala
On Wed, Aug 29, 2007 at 05:48:09PM +0300, Nemesis stars wrote:
>
>
> Афигеть посоветовал.
>
> Мож мне ещё опирационку сменить?
>
> сменить имя? место жительства? странну?
Nice :-)
Have you tried using wi(4) and ath(4) drivers? They both list this card (though
differen
Hi,
On 29/08/2007, Wojciech Puchar <[EMAIL PROTECTED]> wrote:
>
> dump doesn't copy files to files, but files to raw device (partition,
> tape, DVD) or to one/few big files.
Dump is used to back up a file system and can write that data to a file. It
doesn't have to write to a raw device.
To dum
Афигеть посоветовал.
Мож мне ещё опирационку сменить?
сменить имя? место жительства? странну?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
> Here's what I'd use:
> ping -c 1 a.b.c.d; TESTV=$?; if [ $TESTV != 0 ]; then `ifconfig em0 down`;
I'd suggest something more like:
ping -c 1 $host
[ $? -eq 0 ] && ifconfig em0 down && ifconfig em0 up
or
ping -c 1 $host
if [ $? -eq 0 ]; then
ifconfig em0 down && ifconfig em0 up
fi
--
On Aug 29, 2007, at 8:03 AMAug 29, 2007, Hinkie wrote:
Hi
I want to run a cron job in /etc/crontab that runs (ifconfig em0
down; ifconfig em0 up) if my cables static ip gateway can't be
pinged but I can't figure it out. I can't get the syntax that runs
in the command window, to then put
Купи нормальную сетевуху чувак!
Best regards,
Masyukevich Maksim
SPIRIT DSP & SeeStorm
www.spiritDSP.com, Embedded Voice Experience
www.SeeStorm.com, Synthetic Video Conferencing
TeamSpirit - Award-Winning Multi-Point Voice Conferencing Engine
-Original Message-
From: [EMAIL PROTECTE
i just do the following:
clear
/bin/sh
EDITOR=vi
export EDITOR
set -o $EDITOR
echo 1
echo 2
echo 3
echo 4
I tested the command sequence you gave and the result was as you
explained. What caught my attention, however, was that all the
commands were builtin. I tested with non-builtin commands (e
Jim Stapleton wrote:
I was building a couple of packages, figured I'd do it while at work.
I was using portupgrade, and accidentally hit enter before typing all
the package paths. I quickly ctrl-c'ed to exit, forgetting that that
should not be done while pkgdb is running.
Now I get this error wh
Hi.
I install FreeBSD 6.1 and buy D-Link DWL-G520M
But DWL-G520M chipset not support on NDIS
Where I can get New version NDIS or some else?
___
Sorry for my English. I am Ukrainian)
RUS.txt
Description: Binary data
ENG.txt
Description:
Written by Hinkie on 08/29/07 08:03>>
Hi
I want to run a cron job in /etc/crontab that runs (ifconfig em0 down; ifconfig
em0 up) if my cables static ip gateway can't be pinged but I can't figure it
out. I can't get the syntax that runs in the command window, to then put intot
the crontab
Hi Daemons,
I have been trying to learn this amazing OS in the last few months, it has a lot of tools
which can be useful within my toolbox. I am having some issues using this tool call
"Dump", currently located under /sbin/dump, you all know that. ;-). Well, my
goal is to do a dump of file sy
Bahman M. wrote:
Once I had a similar problem on a Linux box (send OK/no receive) and
after days of playing with settings and configurations I found that
the problem was the network _cable_. I replaced the cable and it went
fine without any additional configurations.
Hope this helps.
Bahman
T
> i just do the following:
>
> clear
> /bin/sh
> EDITOR=vi
> export EDITOR
> set -o $EDITOR
> echo 1
> echo 2
> echo 3
> echo 4
>
>
I tested the command sequence you gave and the result was as you
explained. What caught my attention, however, was that all the
commands were builtin. I tested with n
Hi
I want to run a cron job in /etc/crontab that runs (ifconfig em0 down; ifconfig
em0 up) if my cables static ip gateway can't be pinged but I can't figure it
out. I can't get the syntax that runs in the command window, to then put intot
the crontab
Can anyone help me?
I've tried all so
Hi Daemons,
I have been trying to learn this amazing OS in the last few months, it has a
lot of tools which can be useful within my toolbox. I am having some issues
using this tool call "Dump", currently located under /sbin/dump, you all know
that. ;-). Well, my goal is to do a dump of file sys
On 2007-08-29 12:10, O. Hartmann wrote:
> I'm looking for some utilities for the migration and maintenance of UNIX/SAMBA
> users to OpenLDAP. I would like to have some tools/scripts creating well
> defined LDIF files for importation into LDAP.
AFAIK, these are the usual scipts used for that:
http:
I wasn't able to reproduce what you explained...maybe I missed something?
i just do the following:
clear
/bin/sh
EDITOR=vi
export EDITOR
set -o $EDITOR
echo 1
echo 2
echo 3
echo 4
and this is the output:
test# /bin/sh
test# EDITOR=vi
export EDITOR
set -o $EDITOR
echo 1
echo 2
echo 3
echo 4
t
Yuri Pankov пишет:
On Tue, Aug 28, 2007 at 07:18:07PM +0400, Edward wrote:
Ilias Sachpazidis пишет:
Hi, try ettercap. < http://ettercap.sourceforge.net/>
-IS
---
Fraunhofer IGD
Department Cognitive Computing & Medical Imaging
Ilias Sach
On Mon, 27 Aug 2007 14:31:34 -0700
Predrag Punosevac <[EMAIL PROTECTED]> wrote:
> Norberto Meijome wrote:
> > On Sat, 25 Aug 2007 23:05:20 -0700
> > Predrag Punosevac <[EMAIL PROTECTED]> wrote:
> >
> >
> >> I was perfectly able to hear people using Skype but they could not hear
> >> me so my c
[NWlogo.gif] [proud.gif]
Dear Valued Customer,
As a bank we are used to thinking about security.
The internet brings new risks that must also be recognized
and guarded against. At Nationwide, we use industry standard security
technology and practices,
focusing on three key a
I was building a couple of packages, figured I'd do it while at work.
I was using portupgrade, and accidentally hit enter before typing all
the package paths. I quickly ctrl-c'ed to exit, forgetting that that
should not be done while pkgdb is running.
Now I get this error when I try to run pkgdb:
Hello,
I'm looking for some utilities for the migration and maintenance of
UNIX/SAMBA users to OpenLDAP. I would like to have some tools/scripts
creating well defined LDIF files for importation into LDAP.
Any tips or hints?
Thank you very much in advance,
Oliver
__
Once I had a similar problem on a Linux box (send OK/no receive) and
after days of playing with settings and configurations I found that
the problem was the network _cable_. I replaced the cable and it went
fine without any additional configurations.
Hope this helps.
Bahman
On 8/29/07, Nikos Vas
[NWlogo.gif] [proud.gif]
Dear Valued Customer,
As a bank we are used to thinking about security.
The internet brings new risks that must also be recognized
and guarded against. At Nationwide, we use industry standard security
technology and practices,
focusing on three key a
On Wednesday 29 August 2007 12:15, [EMAIL PROTECTED] wrote:
> Nikos Vassiliadis wrote:
> >> The tcpdump test displays PADI! OK, so not in bridging more?
> >
> > No, PADI is your request for initiating a PPPoE connection.
> > You should see an offer(PADO). Something like this:
> > 09:17:56.7449
>I have a 6.1 machine (AMD X2-5200) that reboots itself from time to time
for
>no apparent reason.
Using HTTP accept filters by any chance?
I am investigating a similar problem - running FreeBSD 6.2 on a SupreMicro
server.
Rebooted randomly from 1-2 times a week to 3-4 times a day. Seemed to be
l
Nikos Vassiliadis wrote:
>> The tcpdump test displays PADI! OK, so not in bridging more?
>
> No, PADI is your request for initiating a PPPoE connection.
> You should see an offer(PADO). Something like this:
> 09:17:56.744957 PPPoE PADI [Service-Name] [Host-Uniq 0x04000700]
> 09:18:01.73134
if you won't find it just get your 4.11 install CD
make some dir temporary on a disk
then
cat /path_to_base_distribution_dir/base.??|tar xpf -
and look and move needed files to /usr/local/lib/compat
On Tue, 28 Aug 2007, Jon Drukman wrote:
On 8/28/07, Duane Hill <[EMAIL PROTECTED]> wrote:
Don O'Neil wrote:
Don,
This happens randomly every 3-20 days (no apparent pattern).
Any suggestions on what to check next?
As other wrote: it can be anything. I had a similair problem and it
almost drove me mad. It was a webhosting machine running 5.4, later 6.1
and up. The machine was run
cd /usr/ports/misc/compat4x
make install clean
On Tue, 28 Aug 2007, Jon Drukman wrote:
I just installed FBSD 6.2, but I have a requirement to use some precompiled
binaries from FreeBSD 4.11. They are failing because libm.so.2 is not
available. Is there a compatibility package that I can in
Ok Scott I got you. You want to rip the CD. That should be easier. Let me
suggest something elementary first. Why don't you
mount your cd as
su -
password
mount-t cd9660 /dev/acd0 /mnt
ripping CD means reading music out of it. not data CD
___
freebsd
cdda2wav seems to extract a wav file fine, with no errors. File is playable.
cdparanoia also creates a playable wav file just fine.
so use them especially last, as it corrects well music if CD isn't
clean/is scratched
dd is not for audio CDs, as RAW reading isn't supported by acd driver
May "systat" can help you.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
1 - 100 of 104 matches
Mail list logo
